• Similar to the evolution from wired Internet to mobile Internet (MI), the growing demand of power delivery anywhere and anytime appeals for power grid transformation from wired to mobile domain. We propose here the next generation of power delivery network -- mobile energy internet (MEI) for wireless energy transfer within a mobile range from several meters to tens of meters. MEI will be a significant complement for Internet of things (IoT), because battery charging is one of the biggest headaches for IoT devices. Since MEI relies on wireless power transfer (WPT), we at first review various WPT technologies and particularly introduce a promising long-range high-power WPT method, namely resonant beam charging (RBC), which can transmit wireless power to multiple devices concurrently and safely. Then, we specify the MEI application, configuration, and topology. Furthermore, we present the MEI layered functional architecture and software-defined MEI model. Finally, we discuss the features of MEI and outline its opportunities and challenges. MEI can be viewed as the expansion from Internet of energy (IoE) to mobile domain, which has the potential to play the similar role of MI in information technology.
  • Wireless power transfer (WPT) is a promising solution to provide convenient and perpetual energy supplies to electronics. Traditional WPT technologies face the challenge of providing Watt-level power over meter-level distance for Internet of Things (IoT) and mobile devices, such as sensors, controllers, smart-phones, laptops, etc.. Distributed laser charging (DLC), a new WPT alternative, has the potential to solve these problems and enable WPT with the similar experience as WiFi communications. In this paper, we present a multi-module DLC system model, in order to illustrate its physical fundamentals and mathematical formula. This analytical modeling enables the evaluation of power conversion or transmission for each individual module, considering the impacts of laser wavelength, transmission attenuation and photovoltaic-cell (PV-cell) temperature. Based on the linear approximation of electricity-to-laser and laser-to-electricity power conversion validated by measurement and simulation, we derive the maximum power transmission efficiency in closed-form. Thus, we demonstrate the variation of the maximum power transmission efficiency depending on the supply power at the transmitter, laser wavelength, transmission distance, and PV-cell temperature. Similar to the maximization of information transmission capacity in wireless information transfer (WIT), the maximization of the power transmission efficiency is equally important in WPT. Therefore, this work not only provides the insight of DLC in theory, but also offers the guideline of DLC system design in practice.
  • To further improve the system capacity for 5G, we explore the integration of non-orthogonal multiple access (NOMA) in mmWave communications (mmWave-NOMA) for future 5G systems. Compared with the conventional NOMA, the distinguishing feature of mmWave-NOMA is that, it is usually characterized by transmit/receive beamforming with large antenna arrays. In this paper, we focus on the design challenges of mmWave-NOMA due to beamforming. Firstly, we study how beamforming affects the sum-rate performance of mmWave-NOMA, and find that with conventional single-beam forming, the performance may be offset by the relative angle between NOMA users. Then, we consider multi-beam forming for mmWave-NOMA, which is shown to be able to achieve promising performance enhancement as well as robustness. We further investigate the challenging joint design of the intertwined power allocation and user pairing for mmWave-NOMA. We also discuss the challenges and propose some potential solutions in detail. Finally, we consider hybrid spatial division multiple access (SDMA) and NOMA in mmWave communications, where some possible system configurations and the corresponding solutions are discussed to address the multi-user issues including multi-user precoding and multi-user interference (MUI) mitigation.
  • The potential of doubling the spectrum efficiency of full-duplex (FD) transmission motivates us to investigate FD millimeter-wave (FD-mmWave) communication. To realize FD transmission in the mmWave band, we first introduce possible antenna configurations for FD-mmWave transmission. It is shown that, different from the cases in micro-wave band FD communications, the configuration with separate Tx/Rx antenna arrays appears more flexible in self-interference (SI) suppression while it may increase some cost and area versus that with the same array. We then model the mmWave SI channel with separate Tx/Rx arrays, where a near-field propagation model is adopted for the line-of-sight (LOS) path, and it is found that the established LOS-SI channel with separate Tx/Rx arrays also shows spatial sparsity. Based on the SI channel, we further explore approaches to mitigate SI by signal processing, and we focus on a new cancellation approach in FD-mmWave communication, i.e., beamforming cancellation. Centered on the constant-amplitude (CA) constraint of the beamforming vectors, we propose several candidate solutions. Lastly, we consider an FD-mmWave multi-user scenario, and show that even if there are no FD users in an FD-mmWave cellular system, the FD benefit can still be exploited in the FD base station. Candidate solutions are also discussed to mitigate both SI and multi-user interference (MUI) simultaneously.
  • In this paper, we study hierarchical codebook design for channel estimation in millimeter-wave (mmWave) communications with a hybrid precoding structure. Due to the limited saturation power of mmWave power amplifier (PA), we take the per-antenna power constraint (PAPC) into consideration. We first propose a metric, i.e., generalized detection probability (GDP), to evaluate the quality of \emph{an arbitrary codeword}. This metric not only enables an optimization approach for mmWave codebook design, but also can be used to compare the performance of two different codewords/codebooks. To the best of our knowledge, GDP is the first metric particularly for mmWave codebook design for channel estimation. We then propose an approach to design a hierarchical codebook exploiting BeaM Widening with Multi-RF-chain Sub-array technique (BMW-MS). To obtain crucial parameters of BMW-MS, we provide two solutions, namely a low-complexity search (LCS) solution to optimize the GDP metric and a closed-form (CF) solution to pursue a flat beam pattern. Performance comparisons show that BMW-MS/LCS and BMW-MS/CF achieve very close performances, and they outperform the existing alternatives under the PAPC.
  • In millimeter-wave (mmWave) MIMO systems, while a hybrid digital/analog precoding structure offers the potential to increase the achievable rate, it also faces the challenge of the need of a low-complexity design. In specific, the hybrid precoding may require matrix operations with a scale of antenna size, which is generally large in mmWave communication. Moreover, the channel estimation is also rather time consuming due to the large number of antennas at both Tx/Rx sides. In this paper, a low-complexity hybrid precoding and channel estimation approach is proposed. In the channel estimation phase, a hierarchical multi-beam search scheme is proposed to fast acquire $N_{\rm{S}}$ (the number of streams) multipath components (MPCs)/clusters with the highest powers. In the hybrid precoding phase, the analog and digital precodings are decoupled. The analog precoding is designed to steer along the $N_{\rm{S}}$ acquired MPCs/clusters at both Tx/Rx sides, shaping an equivalent $N_{\rm{S}}\times N_{\rm{S}}$ baseband channel, while the digital precoding performs operations in the baseband with the reduced-scale channel. Performance evaluations show that, compared with a state-of-the-art scheme, while achieving a close or even better performance when the number of radio-frequency (RF) chains or streams is small, both the computational complexity of the hybrid precoding and the time complexity of the channel estimation are greatly reduced.
  • To support high data rate urgent or ad hoc communications, we consider mmWave UAV cellular networks and the associated challenges and solutions. To enable fast beamforming training and tracking, we first investigate a hierarchical structure of beamforming codebooks and design of hierarchical codebooks with different beam widths via the sub-array techniques. We next examine the Doppler effect as a result of UAV movement and find that the Doppler effect may not be catastrophic when high gain directional transmission is used. We further explore the use of millimeter wave spatial division multiple access and demonstrate its clear advantage in improving the cellular network capacity. We also explore different ways of dealing with signal blockage and point out that possible adaptive UAV cruising algorithms would be necessary to counteract signal blockage. Finally, we identify a close relationship between UAV positioning and directional millimeter wave user discovery, where update of the former may directly impact the latter and vice versa.
  • In millimeter-wave communication, large antenna arrays are required to achieve high power gain by steering towards each other with narrow beams, which poses the problem to efficiently search the best beam direction in the angle domain at both Tx and Rx sides. As the exhaustive search is time consuming, hierarchical search has been widely accepted to reduce the complexity, and its performance is highly dependent on the codebook design. In this paper, we propose two basic criteria for the hierarchical codebook design, and devise an efficient hierarchical codebook by jointly exploiting sub-array and deactivation (turning-off) antenna processing techniques, where closed-form expressions are provided to generate the codebook. Performance evaluations are conducted under different system and channel models. Results show superiority of the proposed codebook over the existing alternatives.