• ### Two Episodes of Magnetic Reconnections During a Confined Circular-ribbon Flare(1804.05458)

April 16, 2018 astro-ph.SR
We analyze a unique event with an M1.8 confined circular-ribbon flare on 2016 February 13, with successive formations of two circular ribbons at the same location. The flare had two distinct phases of UV and EUV emissions with an interval of about 270 s, of which the second peak was energetically more important. The first episode was accompanied by the eruption of a mini-filament and the fast elongation motion of a thin circular ribbon (CR1) along the counterclockwise direction at a speed of about 220 km/s. Two elongated spine-related ribbons were also observed, with the inner ribbon co-temporal with CR1 and the remote brightenings forming ~20 s later. In the second episode, another mini-filament erupted and formed a blowout jet. The second circular ribbon and two spine-related ribbons showed similar elongation motions with that during the first episode. The extrapolated 3D coronal magnetic fields reveal the existence of a fan-spine topology, together with a quasi-separatrix layer (QSL) halo surrounding the fan plane and another QSL structure outlining the inner spine. We suggest that continuous null-point reconnection between the filament and ambient open field occurs in each episode, leading to the sequential opening of the filament and significant shifts of the fan plane footprint. For the first time, we propose a compound eruption model of circular-ribbon flares consisting of two sets of successively formed ribbons and eruptions of multiple filaments in a fan-spine-type magnetic configuration.
• ### Simultaneous transverse and longitudinal oscillations in a quiescent prominence triggered by a coronal jet(1711.00670)

Nov. 2, 2017 astro-ph.SR
In this paper, we report our multiwavelength observations of the simultaneous transverse and longitudinal oscillations in a quiescent prominence on 2015 June 29. A C2.4 flare took place in active region 12373, which was associated with a pair of short ribbons and a remote ribbon. During the impulsive phase of the flare, a coronal jet spurted out of the primary flare site and propagated in the northwest direction at an apparent speed of $\sim$224 km s$^{-1}$. Part of the jet stopped near the remote ribbon. The remaining part continued moving forward before stopping to the east of prominence. Once the jet encountered the prominence, it pushed the prominence to oscillate periodically. The transverse oscillation of the eastern part (EP) of prominence can be divided into two phases. In phase I, the initial amplitude, velocity, period, and damping timescale are $\sim$4.5 Mm, $\sim$20 km s$^{-1}$, $\sim$25 minutes, and $\sim$7.5 hr, respectively. In phase II, the initial amplitude increases to $\sim$11.3 Mm while the initial velocity halves to $\sim$10 km s$^{-1}$. The period increases by a factor of $\sim$3.5. The western part (WP) of prominence also experienced transverse oscillation. The initial amplitude is only $\sim$2 Mm and the velocity is less than 10 km s$^{-1}$. The period ($\sim$27 minutes) is slightly longer than that of EP in phase I. To the east of prominence, a handful of horizontal threads experienced longitudinal oscillation. The initial amplitude, velocity, period, and damping timescale are $\sim$52 Mm, $\sim$50 km s$^{-1}$, $\sim$99 minutes, and 2.5 hr, respectively. To our knowledge, this is the first report of simultaneous transverse and longitudinal prominence oscillations triggered by a coronal jet.
• ### Doppler shift oscillations from a hot line observed by IRIS(1709.10059)

Sept. 30, 2017 astro-ph.SR
We present a detailed investigation of the Doppler shift oscillations in a hot loop during an M7.1 flare on 2014 October 27 observed by the Interface Region Imaging Spectrograph. The periodic oscillations are observed in the Doppler shift of Fe XXI 1354.09 A (logT~7.05), and the dominant period is about 3.1 minutes. However, such 3.1-min oscillations are not found in the line-integrated intensity of Fe XXI 1354.09 A, AIA EUV fluxes, or microwave emissions. SDO/AIA and Hinode/XRT imaging observations indicate that the Doppler shift oscillations locate at the hot loop-top region (> 11MK). Moreover, the differential emission measure (DEM) results show that the temperature is increasing rapidly when the Doppler shift oscillates, but the number density does not exhibit the corresponding increases nor oscillations, implying that the flare loop is likely to oscillate in an incompressible mode. All these facts suggest that the Doppler shift oscillations at the shorter period are most likely the standing kink oscillations in a flare loop. Meanwhile, a longer period of about 10 minutes is identified in the time series of Doppler shift and line-integrated intensity, GOES SXR fluxes and AIA EUV light curves, indicating the periodic energy release in this flare, which may be caused by a slow mode wave.
• ### Design of a Nondestructive Two-in-One Instrument for Measuring the Polarization and Energy Spectrum at an X-ray FEL Facility(1702.06652)

The free electron laser (FEL), as a next-generation light source, is an attractive tool in scientific frontier research because of its advantages of full coherence, ultra-short pulse duration, and controllable polarization. Owing to the demand of real-time bunch diagnosis during FEL experiments, precise nondestructive measurements of the polarization and X-ray energy spectrum using one instrument are preferred. In this paper, such an instrument based on the electron time-of-flight technique is proposed. By considering the complexity and nonlinearity, a numerical model in the framework of Geant4 has been developed for optimization. Taking the Shanghai Soft X-ray FEL user facility as an example, its measurement performances' dependencies on the critical parameters were studied systematically, and, finally, an optimal design was obtained, achieving resolutions of 0.5% for the polarization degree and 0.3 eV for the X-ray energy spectrum.
• ### Quasi-periodic pulsations with multiple periods in hard X-ray emission(1706.01680)

June 6, 2017 astro-ph.SR
We explore the quasi-periodic pulsations (QPPs) with multiple periods in hard X-ray (HXR) emission from Fermi/GBM during the impulsive phase of solar flare (SOL2014-09-10). The completely new observational result is that the shorter periods appear at lower energies of the X-ray photons at the beginning and the longer periods appear at higher energies at the end, with some intersection of the periods at medium energies. We also find the shorter and then the longer periods during the same phase of this flare. Using the wavelet power spectrum and fast Fourier transform (FFT) spectrum, we analyze the normalized rapidly varying signal divided by its slowly varying signal, which is the smoothed original HXR flux. The periods of 27 s and 37 s are derived at lower energy channels between 17:25 UT and 17:29 UT, i.e., 12.0-27.3 keV and 27.3-50.9 keV. Then the periods of 27 s, 46 s and 60 s are observed at medium-energy channel from 17:26 UT to 17:33 UT, such as 50.9-102.3 keV. And the period of 80 s is detected at higher energy channel from 17:28 UT to 17:33 UT, such as 102.3-296.4 keV.
• ### Explosive chromospheric evaporation driven by nonthermal electrons around one footpoint of a solar flare loop(1705.02448)

May 6, 2017 astro-ph.SR
We explore the temporal relationship between microwave/HXR emission and Doppler velocity during the impulsive phase of a solar flare on 2014 October 27 (SOL2014-10-27), which displays a pulse on the light curves in microwave (34 GHz) and hard X-ray (HXR, 25-50 keV) bands before the flare maximum. Imaging observation shows that this pulse mainly comes from one footpoint of a solar flare loop. The slit of Interface Region Imaging Spectrograph (IRIS) stays at this footpoint during this solar flare. The Doppler velocities of Fe XXI 1354.09 A and Si IV 1402.77 A are extracted from the Gaussian fitting method. We find that the hot line of Fe XXI 1354.09 A (logT~7.05) in corona exhibits blue shift, while the cool line of Si IV 1402.77 A (logT~4.8) in transition region exhibits red shift, indicating explosive chromospheric evaporation. The evaporative upflows along the flare loop are also observed in the AIA 131 A image. To our knowledge, this is the first report of chromospheric evaporation evidence from both spectral and imaging observations in the same flare. Both microwave and HXR pulses are well correlated with the Doppler velocities, suggesting that the chromospheric evaporation is driven by nonthermal electrons around this footpoint of a solar flare loop.
• ### Interaction of two filaments in a long filament channel associated with twin coronal mass ejections(1701.05122)

Jan. 18, 2017 astro-ph.SR
Using the high-quality observations of the Solar Dynamics Observatory, we present the interaction of two filaments (F1 and F2) in a long filament channel associated with twin coronal mass ejections (CMEs) on 2016 January 26. Before the eruption, a sequence of rapid cancellation and emergence of the magnetic flux has been observed, which likely triggered the ascending of the west filament (F1). The east footpoints of rising F1 moved toward the east far end of the filament channel, accompanying with post-eruption loops and flare ribbons. It likely indicated a large-scale eruption involving the long filament channel, resulted from the interaction between F1 and the east filament (F2). Some bright plasma flew over F2, and F2 stayed at rest during the eruption, likely due to the confinement of its overlying lower magnetic field. Interestingly, the impulsive F1 pushed its overlying magnetic arcades to form the first CME, and F1 finally evolved into the second CME after the collision with the nearby coronal hole. We suggest that the interaction of F1 and the overlying magnetic field of F2 led to the merging reconnection that form a longer eruptive filament loop. Our results also provide a possible picture of the origin of twin CMEs, and show the large-scale magnetic topology of the coronal hole is important for the eventual propagation direction of CMEs.
• ### Quasi-periodic pulsations with periods that change depending on whether the pulsations have thermal or nonthermal components(1612.02677)

Dec. 8, 2016 astro-ph.SR
Context. Quasi-periodic pulsations (QPPs) typically display periodic and regular peaks in the light curves during the flare emissions. Sometimes, QPPs show multiple periods at the same wavelength. However, changing periods in various channels are rare. Aims. We report QPPs in a solar flare on 2014 October 27. They showed a period change that depended on whether thermal or nonthermal components were included. The flare was simultaneously observed by many instruments. Methods. Using the fast Fourier transform (FFT), we decomposed the light curves at multiple wavelengths into slowly varying and rapidly varying signals. Then we identified the QPPs as the regular and periodic peaks from the rapidly varying signals. The periods are derived with the wavelet method and confirmed based on the FFT spectra of the rapidly varying signals. Results. We find a period of 50 s from the thermal emissions during the impulsive phase of the flare, that is, in the soft X-ray bands. At the same time, a period of about 100 s is detected from the nonthermal emissions, such as hard X-ray and microwave channels. The period ratio is exactly 2.0, which might be due to the modulations of the magnetic reconnection rate by the fundamental and harmonic modes of magnetohydrodynamic waves. Our results further show that the 100 s period is present over a broad wavelength, such as hard X-rays, extreme-UV/UV, and microwave emissions, indicating the periodic magnetic reconnection in this flare. Conclusions. To our knowledge, this is the first report about period changes from thermal to nonthermal components in a single flare that occur at almost the same time. This new observational finding could be a challenge to the theory of flare QPPs.
• ### Numerical Modeling on Thermal Loading of Diamond Crystal in X-ray FEL Oscillator(1510.04338)

Dec. 4, 2015 physics.acc-ph
Due to high reflectivity and high resolution of X-ray pulses, diamond is one of the most popular Bragg crystals serving as the reflecting mirror and mono$-$chromator in the next generation of free electrons lasers (FELs). The energy deposition of X-rays will result in thermal heating, and thus lattice expansion of the diamond crystal, which may degrade the performance of X-ray FELs. In this paper, the thermal loading effect of diamond crystal for X-ray FEL oscillators has been systematically studied by combined simulation with Geant4 and ANSYS, and its dependence on the environmental temperature, crystal size, X-ray pulse repetition rate and pulse energy are presented. Our results show that taking the thermal loading effects into account, X-ray FEL oscillators are still robust and promising with an optimized design.
• The Jiangmen Underground Neutrino Observatory (JUNO), a 20 kton multi-purpose underground liquid scintillator detector, was proposed with the determination of the neutrino mass hierarchy as a primary physics goal. It is also capable of observing neutrinos from terrestrial and extra-terrestrial sources, including supernova burst neutrinos, diffuse supernova neutrino background, geoneutrinos, atmospheric neutrinos, solar neutrinos, as well as exotic searches such as nucleon decays, dark matter, sterile neutrinos, etc. We present the physics motivations and the anticipated performance of the JUNO detector for various proposed measurements. By detecting reactor antineutrinos from two power plants at 53-km distance, JUNO will determine the neutrino mass hierarchy at a 3-4 sigma significance with six years of running. The measurement of antineutrino spectrum will also lead to the precise determination of three out of the six oscillation parameters to an accuracy of better than 1\%. Neutrino burst from a typical core-collapse supernova at 10 kpc would lead to ~5000 inverse-beta-decay events and ~2000 all-flavor neutrino-proton elastic scattering events in JUNO. Detection of DSNB would provide valuable information on the cosmic star-formation rate and the average core-collapsed neutrino energy spectrum. Geo-neutrinos can be detected in JUNO with a rate of ~400 events per year, significantly improving the statistics of existing geoneutrino samples. The JUNO detector is sensitive to several exotic searches, e.g. proton decay via the $p\to K^++\bar\nu$ decay channel. The JUNO detector will provide a unique facility to address many outstanding crucial questions in particle and astrophysics. It holds the great potential for further advancing our quest to understanding the fundamental properties of neutrinos, one of the building blocks of our Universe.
• ### Observational Evidences of Electron-driven Evaporation in two Solar Flares(1509.07226)

Sept. 24, 2015 astro-ph.SR
We have explored the relationship between hard X-ray (HXR) emissions and Doppler velocities caused by the chromospheric evaporation in two X1.6 class solar flares on 2014 September 10 and October 22, respectively. Both events display double ribbons and Interface Region Imaging Spectrograph (IRIS) slit is fixed on one of their ribbons from the flare onset. The explosive evaporations are detected in these two flares. The coronal line of Fe XXI 1354.09 A shows blue shifts, but chromospheric line of C I 1354.29 A shows red shifts during the impulsive phase. The chromospheric evaporation tends to appear at the front of flare ribbon. Both Fe XXI and C I display their Doppler velocities with a increase-peak-decrease' pattern which is well related to the rising-maximum- decay' phase of HXR emissions. Such anti-correlation between HXR emissions and Fe XXI Doppler shifts, and correlation with C I Doppler shifts indicate the electron-driven evaporation in these two flares.
• ### Rayleigh scattering of linear alkylbenzene in large liquid scintillator detectors(1504.00987)

Rayleigh scattering poses an intrinsic limit for the transparency of organic liquid scintillators. This work focuses on the Rayleigh scattering length of linear alkylbenzene (LAB), which will be used as the solvent of the liquid scintillator in the central detector of the Jiangmen Underground Neutrino Observatory. We investigate the anisotropy of the Rayleigh scattering in LAB, showing that the resulting Rayleigh scattering length will be significantly shorter than reported before. Given the same overall light attenuation, this will result in a more efficient transmission of photons through the scintillator, increasing the amount of light collected by the photosensors and thereby the energy resolution of the detector.
• ### Densities, isobaric thermal expansion coefficients and isothermal compressibilities of linear alkylbenzene(1408.0877)

April 4, 2015 hep-ex, physics.ins-det
We report the measurements of the densities of linear alkylbenzene at three temperatures over 4 to 23 Celsius degree with pressures up to 10 MPa. The measurements have been analysed to yield the isobaric thermal expansion coefficients and, so far for the first time, isothermal compressibilities of linear alkylbenzene. Relevance of results for current generation (i.e. Daya Bay) and next generation (i.e. JUNO) large liquid scintillator neutrino detectors are discussed.
• ### Observation and Simulation of Longitudinal Oscillations of an Active Region Prominence(1204.3787)

April 17, 2012 astro-ph.SR
Filament longitudinal oscillations have been observed on the solar disk in H$\alpha$. We intend to find an example of the longitudinal oscillations of a prominence, where the magnetic dip can be seen directly, and examine what is the restoring force of such kind of oscillations. We carry out a multiwavelength data analysis of the active region prominence oscillations above the western limb on 2007 February 8. Besides, we perform a one-dimensional hydrodynamic simulation of the longitudinal oscillations. The high-resolution observations by Hinode/SOT indicate that the prominence, seen as a concave-inward shape in lower-resolution Extreme Ultraviolet (EUV) images, actually consists of many concave-outward threads, which is indicative of the existence of magnetic dips. After being injected into the dip region, a bulk of prominence material started to oscillate for more than 3.5 hours, with the period being 52 min. The oscillation decayed with time, with the decay timescale being 133 min. Our hydrodynamic simulation can well reproduce the oscillation period, but the damping timescale in the simulation is 1.5 times as long as the observations. The results clearly show the prominence longitudinal oscillations around the dip of the prominence and our study suggests that the restoring force of the longitudinal oscillations might be the gravity. Radiation and heat conduction are insufficient to explain the decay of the oscillations. Other mechanisms, such as wave leakage and mass accretion, have to be considered. The possible relation between the longitudinal oscillations and the later eruption of a prominence thread, as well as a coronal mass ejection (CME), is also discussed.
• ### Tests of a Digital Hadron Calorimeter(1005.0409)

May 3, 2010 hep-ex, physics.ins-det
In the context of developing a hadron calorimeter with extremely fine granularity for the application of Particle Flow Algorithms to the measurement of jet energies at a future lepton collider, we report on extensive tests of a small scale prototype calorimeter. The calorimeter contained up to 10 layers of Resistive Plate Chambers (RPCs) with 2560 1 \times 1 cm2 readout pads, interleaved with steel absorber plates. The tests included both long-term Cosmic Ray data taking and measurements in particle beams, where the response to broadband muons and to pions and positrons with energies in the range of 1 - 16 GeV was established. Detailed measurements of the chambers efficiency as function of beam intensity have also been performed using 120 GeV protons at varying intensity. The data are compared to simulations based on GEANT4 and to analytical calculations of the rate limitations.
• ### Environmental Dependence of the Performance of Resistive Plate Chambers(0911.1351)

Nov. 6, 2009 physics.ins-det
This paper reports on the performance of Resistive Plate Chambers (RPCs) as function of the gas flow rate through the chambers and of environmental conditions, such as atmospheric pressure, ambient temperature and air humidity. The chambers are read out by pads with an area of 1 x 1 cm2 and a 1-bit resolution per pad. The performance measures include the noise rate as well as the detection efficiency and pad multiplicity for cosmic rays. The measurements extended over a period of almost one year and are sensitive to possible long-term aging effects.