
We investigate the magnetic field and temperature dependence of the
singleelectron spin lifetime in silicon quantum dots and find a lifetime of
2.8 ms at a temperature of 1.1 K. We develop a model based on spinvalley
mixing and find that Johnson noise and twophonon processes limit relaxation at
low and high temperature respectively. We also investigate the effect of
temperature on charge noise and find a linear dependence up to 4 K. These
results contribute to the understanding of relaxation in silicon quantum dots
and are promising for qubit operation at elevated temperatures.

Quantum computers promise to solve certain problems that are intractable for
classical computers, such as factoring large numbers and simulating quantum
systems. To date, research in quantum computer engineering has focused
primarily at opposite ends of the required system stack: devising highlevel
programming languages and compilers to describe and optimize quantum
algorithms, and building reliable lowlevel quantum hardware. Relatively little
attention has been given to using the compiler output to fully control the
operations on experimental quantum processors. Bridging this gap, we propose
and build a prototype of a flexible control microarchitecture supporting
quantumclassical mixed code for a superconducting quantum processor. The
microarchitecture is based on three core elements: (i) a codewordbased event
control scheme, (ii) queuebased precise event timing control, and (iii) a
flexible multilevel instruction decoding mechanism for control. We design a set
of quantum microinstructions that allows flexible control of quantum operations
with precise timing. We demonstrate the microarchitecture and microinstruction
set by performing a standard gatecharacterization experiment on a transmon
qubit.

We present two pulse schemes for actively depleting measurement photons from
a readout resonator in the nonlinear dispersive regime of circuit QED. One
method uses digital feedback conditioned on the measurement outcome while the
other is unconditional. In the absence of analytic forms and symmetries to
exploit in this nonlinear regime, the depletion pulses are numerically
optimized using the Powell method. We shorten the photon depletion time by more
than six inverse resonator linewidths compared to passive depletion by waiting.
We quantify the benefit by emulating an ancilla qubit performing repeated
quantum parity checks in a repetition code. Fast depletion increases the mean
number of cycles to a spurious error detection event from order 1 to 75 at a 1
microsecond cycle time.

We demonstrate the active suppression of transmon qubit dephasing induced by
dispersive measurement, using parametric amplification and analog feedback. By
realtime processing of the homodyne record, the feedback controller reverts
the stochastic quantum phase kick imparted by the measurement on the qubit. The
feedback operation matches a model of quantum trajectories with measurement
efficiency $\tilde{\eta} \approx 0.5$, consistent with the result obtained by
postselection. We overcome the bandwidth limitations of the amplification chain
by numerically optimizing the signal processing in the feedback loop and
provide a theoretical model explaining the optimization result.

The stochastic evolution of quantum systems during measurement is arguably
the most enigmatic feature of quantum mechanics. Measuring a quantum system
typically steers it towards a classical state, destroying any initial quantum
superposition and any entanglement with other quantum systems. Remarkably, the
measurement of a shared property between noninteracting quantum systems can
generate entanglement starting from an uncorrelated state. Of special interest
in quantum computing is the parity measurement, which projects a register of
quantum bits (qubits) to a state with an even or odd total number of
excitations. Crucially, a parity meter must discern the two parities with high
fidelity while preserving coherence between sameparity states. Despite
numerous proposals for atomic, semiconducting, and superconducting qubits,
realizing a parity meter creating entanglement for both even and odd
measurement results has remained an outstanding challenge. We realize a
timeresolved, continuous parity measurement of two superconducting qubits
using the cavity in a 3D circuit quantum electrodynamics (cQED) architecture
and phasesensitive parametric amplification. Using postselection, we produce
entanglement by parity measurement reaching 77% concurrence. Incorporating the
parity meter in a feedbackcontrol loop, we transform the entanglement
generation from probabilistic to fully deterministic, achieving 66% fidelity to
a target Bell state on demand. These realizations of a parity meter and a
feedbackenabled deterministic measurement protocol provide key ingredients for
active quantum error correction in the solid state.

Quasiparticle excitations adversely affect the performance of superconducting
devices in a wide range of applications. They limit the sensitivity of photon
detectors in astronomy, the accuracy of current sources in metrology, the
cooling power of microrefrigerators, and could break the topological
protection of Majorana qubits. In superconducting circuits for quantum
information processing, tunneling of quasiparticles across Josephson junctions
constitutes a decoherence mechanism. As relaxation and pure dephasing times of
transmontype charge qubits now reach 100 microseconds, understanding whether
quasiparticle tunneling may already bottleneck coherence is of high interest.
We integrate recent advances in qubit readout and feedback control in circuit
quantum electrodynamics to perform the first realtime observation of
quasiparticle tunneling in a transmon qubit. We demonstrate
quasiparticletunneling contributions to qubit relaxation and pure dephasing in
the millisecond range. Thus, quasiparticle tunneling will not limit coherence
for at least one order of magnitude beyond the state of the art.

Controlled manipulation of quantum states is central to studying natural and
artificial quantum systems. If a quantum system consists of interacting
subunits, the nature of the coupling may lead to quantum levels with
degenerate energy differences. This degeneracy makes frequencyselective
quantum operations impossible. For the prominent group of transversely coupled
twolevel systems, i.e. qubits, we introduce a method to selectively suppress
one transition of a degenerate pair while coherently exciting the other,
effectively creating artificial selection rules. It requires driving two qubits
simultaneously with the same frequency and specified relative amplitude and
phase. We demonstrate our method on a pair of superconducting flux qubits. It
can directly be applied to the other superconducting qubits, and to any other
qubit type that allows for individual driving. Our results provide a
singlepulse controlledNOT gate for the class of transversely coupled qubits.

We present experimental results on the crosstalk between two ACoperated
dispersive bifurcation detectors, implemented in a circuit for highfidelity
readout of two strongly coupled flux qubits. Both phasedependent and
phaseindependent contributions to the crosstalk are analyzed. For proper
tuning of the phase the measured crosstalk is 0.1 % and the correlation between
the measurement outcomes is less than 0.05 %. These results show that
bifurcative readout provides a reliable and generic approach for multipartite
correlation experiments.

We fabricated and tested a squelch circuit consisting of a copper powder
filter with an embedded Josephson junction connected to ground. For small
signals (squelchON), the small junction inductance attenuates strongly from DC
to at least 1 GHz, while for higher frequencies dissipation in the copper
powder increases the attenuation exponentially with frequency. For large
signals (squelchOFF) the circuit behaves as a regular metal powder filter. The
measured ON/OFF ratio is larger than 50dB up to 50 MHz. This squelch can be
applied in low temperature measurement and control circuitry for quantum
nanostructures such as superconducting qubits and quantum dots.

We employ a cryogenic High Electron Mobility Transistor (HEMT) amplifier to
increase the bandwidth of a charge detection setup with a quantum point contact
(QPC) charge sensor. The HEMT is operating at 1K and the circuit has a
bandwidth of 1 MHz. The noise contribution of the HEMT at high frequencies is
only a few times higher than that of the QPC shot noise. We use this setup to
monitor singleelectron tunneling to and from an adjacent quantum dot and we
measure fluctuations in the dot occupation as short as 400 nanoseconds, 20
times faster than in previous work.

We have studied lowfrequency resistance fluctuations in shadowevaporated
Al/AlOx/Al tunnel junctions. Between 300 K and 5 K the spectral density follows
a 1/flaw. Below 5 K, individual defects distort the 1/fshape of the spectrum.
The spectral density decreases linearly with temperature between 150 K and 1 K
and saturates below 0.8 K. At 4.2 K, the spectral density is about two orders
of magnitude lower than expected from a recent survey [D. J. Van Harlingen et
al., Phys. Rev. B 70, 064510 (2004)]. Due to the saturation below 0.8 K the
estimated qubit dephasing times at 100 mK are only about two times longer than
calculated by Van Harlingen et al.

We present a new readout method for a superconducting flux qubit, based on
the measurement of the Josephson inductance of a superconducting quantum
interference device that is inductively coupled to the qubit. The intrinsic
flux detection efficiency and backaction are suitable for a fast and
nondestructive determination of the quantum state of the qubit, as needed for
readout of multiple qubits in a quantum computer. We performed spectroscopy of
a flux qubit and we measured relaxation times of the order of 80 $\mu s$.