The Dark Energy Camera is a new imager with a 2.2-degree diameter field of
view mounted at the prime focus of the Victor M. Blanco 4-meter telescope on
Cerro Tololo near La Serena, Chile. The camera was designed and constructed by
the Dark Energy Survey Collaboration, and meets or exceeds the stringent
requirements designed for the wide-field and supernova surveys for which the
collaboration uses it. The camera consists of a five element optical corrector,
seven filters, a shutter with a 60 cm aperture, and a CCD focal plane of 250
micron thick fully-depleted CCDs cooled inside a vacuum Dewar. The 570 Mpixel
focal plane comprises 62 2kx4k CCDs for imaging and 12 2kx2k CCDs for guiding
and focus. The CCDs have 15 microns x15 microns pixels with a plate scale of
0.263 arc sec per pixel. A hexapod system provides state-of-the-art focus and
alignment capability. The camera is read out in 20 seconds with 6-9 electrons
readout noise. This paper provides a technical description of the camera's
engineering, construction, installation, and current status.
Bright single and binary stars were observed at the 4.1-m telescope with a
fast electron-multiplication camera in the regime of partial turbulence
correction by the visible-light adaptive optics system. We compare the angular
resolution achieved by simple averaging of AO-corrected images (long-exposure),
selection and re-centering (shift-and-add or "lucky" imaging) and speckle
interferometry. The effect of partial AO correction, vibrations, and image
post-processing on the attained resolution is shown. Potential usefulness of
these techniques is evaluated for reaching the diffraction limit in
ground-based optical imaging. Measurements of 75 binary stars obtained during
these tests are given and objects of special interest are discussed. We report
tentative resolution of the astrometric companion to Zeta Aqr B. A concept of
advanced high-resolution camera is outlined.
The PEP-II B Factory Low-Level RF System (LLRF) is a fully programmable VXI
based design running under an EPICS control environment. Several RF feedback
loops are used to control longitudinal coupled-bunch modes driven by the
accelerating mode of the RF cavities. This paper updates the performance of the
LLRF system as beam currents reach design levels. Modifications which enhance
the stability, diagnostics, and overall operational performance are described.
Recent data from high current operation is included.