• Dr. Chengjie Wu and Dr. Chong Chen provided computation resource and helped in the code programming, however they believe they did not contribute to the scientific part therefore consider not to be listed as authors. Thus authors agree to replace the manuscript with updated author list.
  • Transient beam loading effect is one of the key issues in any superconducting accelerators, which needs to be carefully investigated. The core problem in the analysis is to obtain the time evolution of cavity voltage under the transient beam loading. To simplify the problem, the second order ordinary differential equation describing the behavior of the cavity voltage is intuitively simplified to a first order one, with the aid of the two critical approximations lacking the proof for their validity. In this paper, the validity is examined mathematically in some specific cases, resulting in a criterion for the simplification. It's popular to solve the approximated equation for the cavity voltage numerically, while this paper shows that it can also be solved analytically under the step function approximation for the driven term. With the analytical solution to the cavity voltage, the transient reflected power from the cavity and the energy gain of the central particle in the bunch can also be calculated analytically. The validity of the step function approximation for the driven term is examined by direct evaluations. After that, the analytical results are compared with the numerical ones.
  • An inhomogeneous random recursive lattice was constructed from the multi-branched Husimi square lattice. The number of repeating units connected on one vertex was randomly set to be 2 or 3 with a quenched ratio $P_2$ or $P_3$ with $P_2+P_3=1$. The model was designed to describe complex thermodynamic systems with variable coordinating neighbors, e.g. the cross-dimensional range around the surface of a bulk materials. Classical ferromagnetic spin-1 Ising model was solved on the lattice to achieve an annealed solution via the local exact calculation technique. The model exhibits distinct spontaneous magnetization similar to the deterministic system, with however rigorous thermal fluctuations and significant singularities on the entropy behavior around the critical temperature, indicating a complex superheating and supercooling frustration in the cross-dimensional range induced by the stochasticity. The critical temperature was found to be exponentially correlated to the structural ratio $P$ with the coefficient fitted as 0.53187, while the ground state energy presents linear relation to $P$, implying a well-defined average property according to the structural ratio.
  • The solvent casted Poly(ethylene glycol) (PEG) and Poly(lactic acid) (PLA) blend was recrystallized by the thermal treatment of a heating and cooling cycle. The high PEG content blend (30\%wt) showed a striking dispersion behavior, that the materials rapidly dispersed and dissolved in the aqueous environment in a few hours. This phenomenon has not been reported by others, and was not observed in low PEG content samples of 5\%, 10\%, and 20\%, or quenched(amorphous) samples. We hypothesized the mechanism that the chain rearrangement during the thermal treatment leads to the phase separation. And with the phase separation in the recrystallized samples, the PEG potions rapidly dissolved in the aqueous environment, left out the small PLA spherulites being separated and dispersed in the solution. The same underlying reason can also be inferred from the degradation behaviors of other samples. Characterizations of DSC, XRD, and SEM have been done to validate our hypothesis.
  • A superconducting half-wave resonator has been designed with the frequency of 325 MHz and beta of 0.51. Different geometry parameters and shapes of inner conductors (racetrack, ring-shape and elliptical-shape) were optimized to decrease the peak electromagnetic fields to obtain higher accelerating gradients and minimize the dissipated power on the cavity walls. To suppress the operation frequency shift caused by the helium pressure fluctuations and maximize the tuning ranges, the frequency shifts and mechanical properties were studied on the electric and magnetic areas separately. At the end, the helium vessel was also designed to keep the mechanical structure as robust as possible. The fabrication and test of the prototype will be completed in the beginning of 2016.
  • We investigate the one-dimensional $p$-wave superconducting model with periodically modulated hopping and show that under time-reversal symmetry, the number of the Majorana zero modes (MZMs) strongly depends on the modulation period. If the modulation period is odd, there can be at most one MZM. However if the period is even, the number of the MZMs can be zero, one and two. In addition, the MZMs will disappear as the chemical potential varies. We derive the condition for the existence of the MZMs and show that the topological properties in this model are dramatically different from the one with periodically modulated potential.
  • The ferromagnetic Ising spins are modeled on a recursive lattice constructed from random-angled rhombus units with stochastic configurations, to study the magnetic properties of the bulk Fe-based metallic glass. The integration of spins on the structural glass model well represents the magnetic moments in the glassy metal. The model is exactly solved by the recursive calculation technique. The magnetization of the amorphous Ising spins, i.e. the glassy metallic magnet is investigated by our modeling and calculation on a theoretical base. The results show that the glassy metallic magnets has a lower Curie temperature, weaker magnetization, and higher entropy comparing to the regular ferromagnet in crystal form. These findings can be understood with the randomness of the amorphous system, and agrees well with others' experimental observations.
  • A quasi 2-dimensional recursive lattice formed by planar elements have been designed to investigate the surface thermodynamics of Ising spin glass system with the aim to study the metastability of supercooled liquids and the ideal glass transition. The lattice is constructed as a hybrid of partial Husimi lattice representing the bulk and 1D single bonds representing the surface. The recursive properties of the lattices were adopted to achieve exact calculations. The model has an anti-ferromagnetic interaction to give rise to an ordered phase identified as crystal, and a metastable solution representing the amorphous/metastable phase. Interactions between particles farther away than the nearest neighbor distance are taken into consideration. Free energy and entropy of the ideal crystal and supercooled liquid state of the model on the surface are calculated by the partial partition function. By analyzing the free energies and entropies of the crystal and supercooled liquid state, we are able to identify the melting transition and the second order ideal glass transition on the surface. The results show that due to the coordination number change, the transition temperature on the surface decreases significantly compared to the bulk system. Our calculation agrees with experimental and simulation results on the thermodynamics of surfaces and thin films conducted by others.
  • Two kinds of recursive lattices with the same coordination number but different unit cells (2-D square and 3-D cube) are constructed and the antiferromagnetic Ising model is solved exactly on them to study the stable and metastable states. The Ising model with multi-particle interactions is designed to represent a monatomic system or an alloy. Two solutions of the model exhibit the crystallization of liquid, and the ideal glass transition of supercooled liquid respectively. Based on the solutions, the thermodynamics on both lattices was examined. In particular, the free energy, energy, and entropy of the ideal glass, supercooled liquid, crystal, and liquid state of the model on each lattice were calculated and compared with each other. Interactions between particles farther away than the nearest neighbor distance are taken into consideration. The two lattices show comparable properties on the transition temperatures and the thermodynamic behaviors, which proves that both of them are practical to describe the regular 3-D case, while the different effects of the unit types are still obvious.
  • The multi-branched Husimi recursive lattice has been extended to a virtual structure with fractional numbers of branches joined on one site. Although the lattice is undrawable in real space, the concept is consistent with regular Husimi lattice. The Ising spins of antiferromagnetic interaction on such a sets of lattices were calculated to check the critical temperatures ($T_{c}$) and ideal glass transition temperatures ($T_{k}$) variation with fractional branch numbers. Besides the similar results of two solutions representing the stable state (crystal) and metastable state (supercooled liquid) and indicating the phase transition temperatures, the phase transitions show a well-defined shift with branch number variation. Therefore the fractional branch number as a parameter can be used as an adjusting tool in constructing a recursive lattice model to describe real systems.
  • The porous PLA foams potential for tissue engineering usage are prepared by a modified solvent casting/particulate leaching method with different crystallinity. Since in typical method the porogens are solved in the solution and flow with the polymers during the casting and the crystallinity behavior of PLA chains in the limited space cannot be tracked, in this work the processing is modified by diffusing the PLA solution into a steady salt stack. With a thermal treatment before leaching while maintaining the stable structure of the porogens stack, the crystallinity of porous foams is made possible to control. The characterizations indicate the crystallization of porous foams is in a manner of lower crystallibility than the bulk materials. Pores and caves of around 250{\mu}m size are obtained in samples with different crystallinity. The macro-structures are not much impaired by the crystallization nevertheless the morphological effect of the heating process is still obvious.
  • By defining the dimension of natural numbers as the number of prime factors, all natural numbers smaller than 2^(n+1) (n is a natural number) can be classified by their dimensions, and the count of numbers of each dimension gives a dimensions distribution directly related to the distribution of prime numbers. A triangle similar to Pascals triangle from some aspects can be obtained by the ensemble of dimensions distributions. Some superficial explorations have been done to this interesting triangle.