
The KATRIN experiment will probe the neutrino mass by measuring the
betaelectron energy spectrum near the endpoint of tritium betadecay. An
integral energy analysis will be performed by an electrostatic spectrometer
(Main Spectrometer), an ultrahigh vacuum vessel with a length of 23.2 m, a
volume of 1240 m^3, and a complex inner electrode system with about 120000
individual parts. The strong magnetic field that guides the betaelectrons is
provided by superconducting solenoids at both ends of the spectrometer. Its
influence on turbomolecular pumps and vacuum gauges had to be considered. A
system consisting of 6 turbomolecular pumps and 3 km of nonevaporable getter
strips has been deployed and was tested during the commissioning of the
spectrometer. In this paper the configuration, the commissioning with bakeout
at 300{\deg}C, and the performance of this system are presented in detail. The
vacuum system has to maintain a pressure in the 10^{11} mbar range. It is
demonstrated that the performance of the system is already close to these
stringent functional requirements for the KATRIN experiment, which will start
at the end of 2016.

Fitting a data set with a parametrized model can be seen geometrically as
finding the global minimum of the chi^2 hypersurface, depending on a set of
parameters {P_i}. This is usually done using the LevenbergMarquardt algorithm.
The main drawback of this algorithm is that despite of its fast convergence, it
can get stuck if the parameters are not initialized close to the final
solution. We propose a modification of the Metropolis algorithm introducing a
parameter step tuning that optimizes the sampling of parameter space. The
ability of the parameter tuning algorithm together with simulated annealing to
find the global chi^2 hypersurface minimum, jumping across chi^2{P_i} barriers
when necessary, is demonstrated with synthetic functions and with real data.

We present a study of the dynamics and structural changes for
trans1,2dichloroethylene between high and low density liquids using neutron
scattering techniques (diffraction, small angle neutron scattering and time of
flight spectroscopy) and molecular dynamics simulations. We show that changes
in the short range ordering of molecules goes along with a change of the
molecular dynamics: both structure and dynamics of the high density liquid are
more cooperative than those of the low density liquid. The microscopic
mechanism underlying the cooperative motions in the high density liquid has
been found to be related to the backscattering of molecules due to a strong
correlation of molecular ordering.

Thin layers of water on biomolecular and other nanostructured surfaces can be
supercooled to temperatures not accessible with bulk water. Chen et al. [PNAS
103, 9012 (2006)] suggested that anomalies near 220 K observed by quasielastic
neutron scattering can be explained by a hidden critical point of bulk water.
Based on more sensitive measurements of water on perdeuterated phycocyanin,
using the new neutron backscattering spectrometer SPHERES, and an improved data
analysis, we present results that show no sign of such a fragiletostrong
transition. The inflection of the elastic intensity at 220 K has a dynamic
origin that is compatible with a calorimetric glass transition at 170 K. The
temperature dependence of the relaxation times is highly sensitive to data
evaluation; it can be brought into perfect agreement with the results of other
techniques, without any anomaly.

The extraction of any physical information from quasielastic neutron
scattering spectra is generally done by fitting a model to the data by means of
chisquare minimization procedure. However, as pointed out by the pioneering
work of D.S. Sivia et al., also another probabilistic approach based on Bayes
theorem can be employed. In a nutshell, the main difference between the
classical chisquare minimization and the Bayesian approach is the way of
expressing the final results: In the first case, the result is a set of values
of parameters with a symmetric error and a figure of merit such as chisquare,
whereas in the second case the results are presented as probability
distribution functions (PDF) of both, parameters and merit figure. In this
contribution, we demonstrate how final PDFs are obtained by exploring all
possible combinations of parameters that are compatible with the experimental
error. Three advantages of this method will be emphasized: First, correlations
between parameters are automatically taken into account, which implies, for
example, that parameter errors are correctly calculated, correlations show up
in a natural way and ill defined parameters are immediately recognized from
their PDF. Second, it is possible to calculate the likelihood of a determined
physical model, and therefore to select the one among many that fits the data
best with a minimal number of parameters, in a correctly defined probabilistic
way.