• ### CO depletion: a microscopic perspective(1709.01285)

Sept. 5, 2017 astro-ph.GA, astro-ph.SR
In regions where stars form, variations in density and temperature can cause gas to freeze-out onto dust grains forming ice mantles, which influences the chemical composition of a cloud. The aim of this paper is to understand in detail the depletion (and desorption) of CO on (from) interstellar dust grains. Experimental simulations were performed under two different (astrophysically relevant) conditions. In parallel, Kinetic Monte Carlo simulations were used to mimic the experimental conditions. In our experiments, CO molecules accrete onto water ice at temperatures below 27 K, with a deposition rate that does not depend on the substrate temperature. During the warm-up phase, the desorption processes do exhibit subtle differences indicating the presence of weakly bound CO molecules, therefore highlighting a low diffusion efficiency. IR measurements following the ice thickness during the TPD confirm that diffusion occurs at temperatures close to the desorption. Applied to astrophysical conditions, in a pre-stellar core, the binding energies of CO molecules, ranging between 300 K and 850 K, depend on the conditions at which CO has been deposited. Because of this wide range of binding energies, the depletion of CO as a function of AV is much less important than initially thought. The weakly bound molecules, easily released into the gas phase through evaporation, change the balance between accretion and desorption, which result in a larger abundance of CO at high extinctions. In addition, weakly bound CO molecules are also be more mobile, and this could increase the reactivity within interstellar ices.
• ### Parameterizing the interstellar dust temperature(1704.02763)

April 16, 2017 astro-ph.CO, astro-ph.GA
The temperature of interstellar dust particles is of great importance to astronomers. It plays a crucial role in the thermodynamics of interstellar clouds, because of the gas-dust collisional coupling. It is also a key parameter in astrochemical studies that governs the rate at which molecules form on dust. In 3D (magneto)hydrodynamic simulations often a simple expression for the dust temperature is adopted, because of computational constraints, while astrochemical modelers tend to keep the dust temperature constant over a large range of parameter space. Our aim is to provide an easy-to-use parametric expression for the dust temperature as a function of visual extinction ($A_{\rm V}$) and to shed light on the critical dependencies of the dust temperature on the grain composition. We obtain an expression for the dust temperature by semi-analytically solving the dust thermal balance for different types of grains and compare to a collection of recent observational measurements. We also explore the effect of ices on the dust temperature. Our results show that a mixed carbonaceous-silicate type dust with a high carbon volume fraction matches the observations best. We find that ice formation allows the dust to be warmer by up to 15% at high optical depths ($A_{\rm V}> 20$ mag) in the interstellar medium. Our parametric expression for the dust temperature is presented as $T_{\rm d} = \left[ 11 + 5.7\times \tanh\bigl( 0.61 - \log_{10}(A_{\rm V})\bigr) \right] \, \chi_{\rm uv}^{1/5.9}$, where $\chi_{\rm uv}$ is in units of the Draine (1978) UV field
• ### Surface chemistry in photodissociation regions(1604.06797)

April 22, 2016 astro-ph.GA, astro-ph.SR
The presence of dust can strongly affect the chemical composition of the interstellar medium. We model the chemistry in photodissociation regions (PDRs) using both gas-phase and dust-phase chemical reactions. Our aim is to determine the chemical compositions of the interstellar medium (gas/dust/ice) in regions with distinct (molecular) gas densities that are exposed to radiation fields with different intensities. We have significantly improved the Meijerink PDR code by including 3050 new gas-phase chemical reactions and also by implementing surface chemistry. In particular, we have included 117 chemical reactions occurring on grain surfaces covering different processes, such as adsorption, thermal desorption, chemical desorption, two-body reactions, photo processes, and cosmic-ray processes on dust grains. We obtain abundances for different gas and solid species as a function of visual extinction, depending on the density and radiation field. We also analyse the rates of the formation of CO2 and H2O ices in different environments. In addition, we study how chemistry is affected by the presence/absence of ice mantles (bare dust or icy dust) and the impact of considering different desorption probabilities. The type of substrate (bare dust or icy dust) and the probability of desorption can significantly alter the chemistry occurring on grain surfaces, leading to differences of several orders of magnitude in the abundances of gas-phase species, such as CO, H2CO, and CH3OH. The type of substrate, together with the density and intensity of the radiation field, also determine the threshold extinction to form ices of CO2 and H2O. We also conclude that H2CO and CH3OH are mainly released into the gas phase of low, far-ultraviolet illuminated PDRs through chemical desorption upon two-body surface reactions, rather than through photodesorption.
• ### How chemistry influences cloud structure, star formation, and the IMF(1511.06696)

Dec. 17, 2015 astro-ph.GA, astro-ph.SR
In the earliest phases of star-forming clouds, stable molecular species, such as CO, are important coolants in the gas phase. Depletion of these molecules on dust surfaces affects the thermal balance of molecular clouds and with that their whole evolution. For the first time, we study the effect of grain surface chemistry (GSC) on star formation and its impact on the initial mass function (IMF). We follow a contracting translucent cloud in which we treat the gas-grain chemical interplay in detail, including the process of freeze-out. We perform 3d hydrodynamical simulations under three different conditions, a pure gas-phase model, a freeze-out model, and a complete chemistry model. The models display different thermal evolution during cloud collapse. The equation of state (EOS) of the gas becomes softer with CO freeze-out and the results show that at the onset of star formation, the cloud retains its evolution history such that the number of formed stars differ (by 7%) between the three models. While the stellar mass distribution results in a different IMF when we consider pure freeze-out, with the complete treatment of the GSC, the divergence from a pure gas-phase model is minimal. We find that the impact of freeze-out is balanced by the non-thermal processes; chemical and photodesorption. We also find an average filament width of 0.12 pc ($\pm$0.03 pc), and speculate that this may be a result from the changes in the EOS caused by the gas-dust thermal coupling. We conclude that GSC plays a big role in the chemical composition of molecular clouds and that surface processes are needed to accurately interpret observations, however, that GSC does not have a significant impact as far as star formation and the IMF is concerned.
• ### Dust as interstellar catalyst - II. How chemical desorption impacts the gas(1511.02461)

Nov. 8, 2015 astro-ph.GA, astro-ph.SR
Context. Interstellar dust particles, which represent 1% of the total mass, are recognized to be very powerful interstellar catalysts in star-forming regions. The presence of dust can have a strong impact on the chemical composition of molecular clouds. While observations show that many species that formed onto dust grains populate the gas phase, the process that transforms solid state into gas phase remains unclear. Aims. The aim of this paper is to consider the chemical desorption process, i.e. the process that releases solid species into the gas phase, in astrochemical models. These models allow determining the chemical composition of star-forming environments with an accurate treatment of the solid-phase chemistry. Methods. In paper I we derived a formula based on experimental studies with which we quantified the efficiencies of the chemical desorption process. Here we extend these results to astrophysical conditions. Results. The simulations of astrophysical environments show that the abundances of gas-phase methanol and H2O2 increase by four orders of magnitude, whereas gas-phase H2CO and HO2 increase by one order of magnitude when the chemical desorption process is taken into account. The composition of the ices strongly varies when the chemical desorption is considered or neglected. Conclusions. We show that the chemical desorption process, which directly transforms solid species into gas-phase species, is very efficient for many reactions. Applied to astrophysical environments such as Rho Oph A, we show that the chemical desorption efficiencies derived in this study reproduce the abundances of observed gas-phase methanol, HO2, and H2O2, and that the presence of these molecules in the gas shows the last signs of the evolution of a cloud before the frost.
• ### Dust as interstellar catalyst I. Quantifying the chemical desorption process(1510.03218)

Oct. 12, 2015 astro-ph.GA, astro-ph.SR
Context. The presence of dust in the interstellar medium has profound consequences on the chemical composition of regions where stars are forming. Recent observations show that many species formed onto dust are populating the gas phase, especially in cold environments where UV and CR induced photons do not account for such processes. Aims. The aim of this paper is to understand and quantify the process that releases solid species into the gas phase, the so-called chemical desorption process, so that an explicit formula can be derived that can be included into astrochemical models. Methods. We present a collection of experimental results of more than 10 reactive systems. For each reaction, different substrates such as oxidized graphite and compact amorphous water ice are used. We derive a formula to reproduce the efficiencies of the chemical desorption process, which considers the equipartition of the energy of newly formed products, followed by classical bounce on the surface. In part II we extend these results to astrophysical conditions. Results. The equipartition of energy describes correctly the chemical desorption process on bare surfaces. On icy surfaces, the chemical desorption process is much less efficient and a better description of the interaction with the surface is still needed. Conclusions. We show that the mechanism that directly transforms solid species to gas phase species is efficient for many reactions.
• List of contributions from the CTA Consortium presented at the 34th International Cosmic Ray Conference, 30 July - 6 August 2015, The Hague, The Netherlands.
• ### Interplay of gas and ice during cloud evolution(1408.5029)

Jan. 20, 2015 astro-ph.SR
During the evolution of diffuse clouds to molecular clouds, gas-phase molecules freeze out on surfaces of small dust particles to form ices. On dust surfaces, water is the main constituent of the icy mantle in which a complex chemistry is taking place. We aim to study the formation pathways and the composition of the ices throughout the evolution of diffuse clouds. For this purpose, we use time-dependent rate equations to calculate the molecular abundances in both gas phase and on solid surfaces (onto dust grains). We fully consider the gas-dust interplay by including the details of freeze-out, chemical and thermal desorption, as well as the most important photo-processes on grain surfaces. The difference in binding energies of chemical species on bare and icy surfaces is also incorporated into our equations. Using the numerical code FLASH, we perform a hydrodynamical simulation of a gravitationally bound diffuse cloud and follow its contraction. We find that while the dust grains are still bare, water formation is enhanced by grain surface chemistry which is subsequently released into the gas phase, enriching the molecular medium. The CO molecules, on the other hand, tend to freeze out gradually on bare grains. This causes CO to be well mixed and strongly present within the first ice layer. Once one monolayer of water ice has formed, the binding energy of the grain surface changes significantly and an immediate and strong depletion of gas-phase water and CO molecules occur. While hydrogenation converts solid CO into formaldehyde (H$_2$CO) and methanol (CH$_3$OH), water ice becomes the main constituent of the icy grains. Inside molecular clumps formaldehyde is more abundant than water and methanol in the gas phase owing its presence in part to chemical desorption.
• ### Pore evolution in interstellar ice analogues: simulating the effects of temperature increase(1410.6343)

Oct. 23, 2014 astro-ph.SR, astro-ph.EP
Context. The level of porosity of interstellar ices - largely comprised of amorphous solid water (ASW) - contains clues on the trapping capacity of other volatile species and determines the surface accessibility that is needed for solid state reactions to take place. Aims. Our goal is to simulate the growth of amorphous water ice at low temperature (10 K) and to characterize the evolution of the porosity (and the specific surface area) as a function of temperature (from 10 to 120 K). Methods. Kinetic Monte Carlo simulations are used to mimic the formation and the thermal evolution of pores in amorphous water ice. We follow the accretion of gas-phase water molecules as well as their migration on surfaces with different grid sizes, both at the top growing layer and within the bulk. Results. We show that the porosity characteristics change substantially in water ice as the temperature increases. The total surface of the pores decreases strongly while the total volume decreases only slightly for higher temperatures. This will decrease the overall reaction efficiency, but in parallel, small pores connect and merge, allowing trapped molecules to meet and react within the pores network, providing a pathway to increase the reaction efficiency. We introduce pore coalescence as a new solid state process that may boost the solid state formation of new molecules in space and has not been considered so far.
• ### Efficient diffusive mechanisms of O atoms at very low temperatures on surfaces of astrophysical interest(1402.5855)

June 5, 2014 astro-ph.GA, astro-ph.SR
At the low temperatures of interstellar dust grains, it is well established that surface chemistry proceeds via diffusive mechanisms of H atoms weakly bound (physisorbed) to the surface. Until recently, however, it was unknown whether atoms heavier than hydrogen could diffuse rapidly enough on interstellar grains to react with other accreted species. In addition, models still require simple reduction as well as oxidation reactions to occur on grains to explain the abundances of various molecules. In this paper we investigate O-atom diffusion and reactivity on a variety of astrophysically relevant surfaces (water ice of three different morphologies, silicate, and graphite) in the 6.5 - 25 K temperature range. Experimental values were used to derive a diffusion law that emphasizes that O atoms diffuse by quantum mechanical tunnelling at temperatures as low as 6.5 K. The rate of diffusion on each surface, based on modelling results, were calculated and an empirical law is given as a function of the surface temperature. Relative diffusion rates are k_H2Oice > k_sil > k_graph >> k_expected. The implications of an efficient O-atom diffusion over astrophysically relevant time-scales are discussed. Our findings show that O atoms can scan any available reaction partners (e.g., either another H atom, if available, or a surface radical like O or OH) at a faster rate than that of accretion. Also, as dense clouds mature H2 becomes far more abundant than H and the O/H ratio grows, the reactivity of O atoms on grains is such that O becomes one of the dominant reactive partners together with H.
• ### Quantum tunneling of oxygen atoms on very cold surfaces(1402.3207)

Any evolving system can change of state via thermal mechanisms (hopping a barrier) or via quantum tunneling. Most of the time, efficient classical mechanisms dominate at high temperatures. This is why an increase of the temperature can initiate the chemistry. We present here an experimental investigation of O-atom diffusion and reactivity on water ice. We explore the 6-25 K temperature range at sub-monolayer surface coverages. We derive the diffusion temperature law and observe the transition from quantum to classical diffusion. Despite of the high mass of O, quantum tunneling is efficient even at 6 K. As a consequence, the solid-state astrochemistry of cold regions should be reconsidered and should include the possibility of forming larger organic molecules than previously expected.
• ### Porosity measurements of interstellar ice mixtures using optical laser interference and extended effective medium approximations(1312.2414)

Aims. This article aims to provide an alternative method of measuring the porosity of multi-phase composite ices from their refractive indices and of characterising how the abundance of a premixed contaminant (e.g., CO2) affects the porosity of water-rich ice mixtures during omni-directional deposition. Methods. We combine optical laser interference and extended effective medium approximations (EMAs) to measure the porosity of three astrophysically relevant ice mixtures: H2O:CO2=10:1, 4:1, and 2:1. Infrared spectroscopy is used as a benchmarking test of this new laboratory-based method. Results. By independently monitoring the O-H dangling modes of the different water-rich ice mixtures, we confirm the porosities predicted by the extended EMAs. We also demonstrate that CO2 premixed with water in the gas phase does not significantly affect the ice morphology during omni-directional deposition, as long as the physical conditions favourable to segregation are not reached. We propose a mechanism in which CO2 molecules diffuse on the surface of the growing ice sample prior to being incorporated into the bulk and then fill the pores partly or completely, depending on the relative abundance and the growth temperature.
• ### The impact of freeze-out on collapsing molecular clouds(1310.8466)

Nov. 4, 2013 astro-ph.GA, astro-ph.SR
Atoms and molecules, and in particular CO, are important coolants during the evolution of interstellar star-forming gas clouds. The presence of dust grains, which allow many chemical reactions to occur on their surfaces, strongly impacts the chemical composition of a cloud. At low temperatures, dust grains can lock-up species from the gas phase which freeze out and form ices. In this sense, dust can deplete important coolants. Our aim is to understand the effects of freeze-out on the thermal balance and the evolution of a gravitationally bound molecular cloud. For this purpose, we perform 3D hydrodynamical simulations with the adaptive mesh code FLASH. We simulate a gravitationally unstable cloud under two different conditions, with and without grain surface chemistry. We let the cloud evolve until one free-fall time is reached and track the thermal evolution and the abundances of species during this time. We see that at a number density of 10$^4$ cm$^{-3}$ most of the CO molecules are frozen on dust grains in the run with grain surface chemistry, thereby depriving the most important coolant. As a consequence, we find that the temperature of the gas rises up to $\sim$25 K. The temperature drops once again due to gas-grain collisional cooling when the density reaches a few$\times$10$^4$ cm$^{-3}$. We conclude that grain surface chemistry not only affects the chemical abundances in the gas phase, but also leaves a distinct imprint in the thermal evolution that impacts the fragmentation of a star-forming cloud. As a final step, we present the equation of state of a collapsing molecular cloud that has grain surface chemistry included.
• Compilation of CTA contributions to the proceedings of the 33rd International Cosmic Ray Conference (ICRC2013), which took place in 2-9 July, 2013, in Rio de Janeiro, Brazil
• ### Heavy water stratification in a low-mass protostar(1304.2890)

April 10, 2013 astro-ph.GA
Context: Despite the low elemental deuterium abundance in the Galaxy, enhanced molecular D/H ratios have been found in the environments of low-mass star-forming regions and, in particular, the Class 0 protostar IRAS 16293-2422. Aims: The key program Chemical HErschel Surveys of Star forming regions (CHESS) aims at studying the molecular complexity of the interstellar medium. The high sensitivity and spectral resolution of the Herschel/HIFI instrument provide a unique opportunity to observe the fundamental 1_{1,1}-0_{0,0} transition of ortho-D2O at 607 GHz and the higher energy 2_{1,2}-1_{0,1} transition of para-D2O at 898 GHz, both of which are inaccessible from the ground. Methods: The ortho-D2O transition at 607 GHz was previously detected. We present in this paper the first tentative detection for the para-D2O transition at 898 GHz. The spherical Monte Carlo radiative transfer code RATRAN was used to reproduce the observed line profiles of D2O with the same method that was used to reproduce the HDO and H2-18O line profiles in IRAS 16293-2422. Results: As for HDO, the absorption component seen on the D2O lines can only be reproduced by adding an external absorbing layer, possibly created by the photodesorption of the ices at the edges of the molecular cloud. The D2O column density is found to be about 2.5e12 cm^{-2} in this added layer, leading to a D2O/H2O ratio of about 0.5%. At a 3 sigma uncertainty, upper limits of 0.03% and 0.2% are obtained for this ratio in the hot corino and the colder envelope of IRAS 16293-2422, respectively. Conclusions: The deuterium fractionation derived in our study suggests that the ices present in IRAS 16293-2422 formed on warm dust grains (~15-20 K) in dense (~1e4-5e4 cm^{-3}) translucent clouds. These results allow us to address the earliest phases of star formation and the conditions in which ices form.
• ### Hydrogenation of PAH cations: a first step towards H2 formation(1211.4984)

Nov. 21, 2012 physics.chem-ph, astro-ph.GA
Molecular hydrogen is the most abundant molecule in the universe. A large fraction of H2 forms by association of hydrogen atoms adsorbed on polycyclic aromatic hydrocarbons (PAHs), where formation rates depend crucially on the H sticking probability. We have experimentally studied PAH hydrogenation by exposing coronene cations, confined in a radiofrequency ion trap, to gas phase atomic hydrogen. A systematic increase of the number of H atoms adsorbed on the coronene with the time of exposure is observed. Odd coronene hydrogenation states dominate the mass spectrum up to 11 H atoms attached. This indicates the presence of a barrier preventing H attachment to these molecular systems. For the second and fourth hydrogenation, barrier heights of 72 +- 6 meV and 40 +- 10 meV, respectively are found which is in good agreement with theoretical predictions for the hydrogenation of neutral PAHs. Our experiments however prove that the barrier does not vanish for higher hydrogenation states. These results imply that PAH cations, as their neutral counterparts, exist in highly hydrogenated forms in the interstellar medium. Due to this catalytic activity, PAH cations and neutrals seem to contribute similarly to the formation of H2.
• ### The impact of magnetic fields on the IMF in star-forming clouds near a supermassive black hole(1207.5657)

Aug. 2, 2012 astro-ph.GA
Star formation in the centers of galaxies is thought to yield massive stars with a possibly top-heavy stellar mass distribution. It is likely that magnetic fields play a crucial role in the distribution of stellar masses inside star-forming molecular clouds. In this context, we explore the effects of magnetic fields, with a typical field strength of 38 microG, such as in RCW 38, and a field strength of 135 microG, similar to NGC 2024 and the infrared dark cloud G28.34+0.06, on the initial mass function (IMF) near (< 10 pc) a 10^7 solar mass black hole. Using these conditions, we perform a series of numerical simulations with the hydrodynamical code FLASH to elucidate the impact of magnetic fields on the IMF and the star-formation efficiency (SFE) emerging from an 800 solar mass cloud. We find that the collapse of a gravitationally unstable molecular cloud is slowed down with increasing magnetic field strength and that stars form along the field lines. The total number of stars formed during the simulations increases by a factor of 1.5-2 with magnetic fields. The main component of the IMF has a lognormal shape, with its peak shifted to sub-solar (< 0.3 M_sun) masses in the presence of magnetic fields, due to a decrease in the accretion rates from the gas reservoir. In addition, we see a top-heavy, nearly flat IMF above ~2 solar masses, from regions that were supported by magnetic pressure until high masses are reached. We also consider the effects of X-ray irradiation if the central black hole is active. X-ray feedback inhibits the formation of sub-solar masses and decreases the SFEs even further. Thus, the second contribution is no longer visible. We conclude that magnetic fields potentially change the SFE and the IMF both in active and inactive galaxies, and need to be taken into account in such calculations.
• ### Enhanced H2O formation through dust grain chemistry in X-ray exposed environments(1111.2198)

Nov. 9, 2011 astro-ph.GA
The ULIRG Mrk 231 exhibits very strong water rotational lines between \lambda = 200-670\mu m, comparable to the strength of the CO rotational lines. High redshift quasars also show similar CO and H2O line properties, while starburst galaxies, such as M82, lack these very strong H2O lines in the same wavelength range, but do show strong CO lines. We explore the possibility of enhancing the gas phase H2O abundance in X-ray exposed environments, using bare interstellar carbonaceous dust grains as a catalyst. Cloud-cloud collisions cause C and J shocks, and strip the grains of their ice layers. The internal UV field created by X-rays from the accreting black hole does not allow to reform the ice. We determine formation rates of both OH and H2O on dust grains, having temperature T_dust=10-60 K, using both Monte Carlo as well as rate equation method simulations. The acquired formation rates are added to our X-ray chemistry code, that allows us to calculate the thermal and chemical structure of the interstellar medium near an active galactic nucleus. We derive analytic expressions for the formation of OH and H2O on bare dust grains as a catalyst. Oxygen atoms arriving on the dust are released into the gas phase under the form of OH and H2O. The efficiencies of this conversion due to the chemistry occurring on dust are of order 30 percent for oxygen converted into OH and 60 percent for oxygen converted into H_2O between T_dust=15-40 K. At higher temperatures, the efficiencies rapidly decline. When the gas is mostly atomic, molecule formation on dust is dominant over the gas-phase route, which is then quenched by the low H2 abundance. Here, it is possible to enhance the warm (T> 200 K) water abundance by an order of magnitude in X-ray exposed environments. This helps to explain the observed bright water lines in nearby and high-redshift ULIRGs and Quasars.
• ### Interstellar ices as witnesses of star formation: selective deuteration of water and organic molecules unveiled(1107.1984)

Oct. 4, 2011 astro-ph.SR
Observations of star forming environments revealed that the abundances of some deuterated interstellar molecules are markedly larger than the cosmic D/H ratio of 10-5. Possible reasons for this pointed to grain surface chemistry. How- ever, organic molecules and water, which are both ice constituents, do not enjoy the same deuteration. For example, deuterated formaldehyde is very abundant in comets and star forming regions, while deuterated water rarely is. In this article, we explain this selective deuteration by following the formation of ices (using the rate equation method) in translucent clouds, as well as their evolu- tion as the cloud collapses to form a star. Ices start with the deposition of gas phase CO and O onto dust grains. While reaction of oxygen with atoms (H or D) or molecules (H2) yields H2O (HDO), CO only reacts with atoms (H and D) to form H2CO (HDCO, D2CO). As a result, the deuteration of formaldehyde is sensitive to the gas D/H ratio as the cloud undergoes gravitational collapse, while the deuteration of water strongly depends on the dust temperature at the time of ice formation. These results reproduce well the deuterium fractionation of formaldehyde observed in comets and star forming regions and can explain the wide spread of deuterium fractionation of water observed in these environments.
• ### When sticking influences H2 formation(1107.5193)

July 26, 2011 astro-ph.SR
Aims. Interstellar dust grains, because of their catalytic properties, are crucial to the formation of H2, the most abundant molecule in the Universe. The formation of molecular hydrogen strongly depends on the ability of H atoms to stick on dust grains. In this study we determine the sticking coefficient of H atoms chemisorbed on graphitic surfaces, and estimate its impact on the forma- tion of H2. Methods. The sticking probability of H atoms chemisorbed onto graphitic surfaces is obtained using a mixed classical-quantum dynamics method. In this, the H atom is treated quantum- mechanically and the vibrational modes of the surface are treated classically. The implications of sticking for the formation of H2 are addressed by using Kinetic Monte Carlo simulations that follow how atoms stick, move and associate with each other on dust surfaces of different temper- ature. Results. In our model, molecular hydrogen forms very efficiently for dust temperatures lower than 15 K through the involvement of physisorbed H atoms. At dust temperatures higher than 15 K and gas temperatures lower than 2000 K, H2 formation differs strongly if the H atoms com- ing from the gas phase have to cross a square barrier (usually considered in previous studies) or a barrier obtained by DFT calculations to become chemisorbed. The product of sticking times efficiency can be increased by many orders of magnitude when realistic barriers are considered. If graphite phonons are taken into account in the dynamics calculations, then H atoms stick better on the surface at high energies, but the overall H2 formation efficiency is only slightly affected. Our results suggest that H2 formation can proceed efficiently in photon dominated regions, X-ray dominated regions, hot cores and in the early Universe when the first dust is available.
• ### The Snow Border(1104.0535)

April 4, 2011 astro-ph.EP
Context. The study of the snow line is an important topic in several domains of astrophysics, and particularly for the evolution of proto-stellar environments and the formation of planets. Aims. The formation of the first layer of ice on carbon grains requires low temperatures compared to the temperature of evaporation (T > 100 K). This asymmetry generates a zone in which bare and icy dust grains coexist. Methods. We use Monte-Carlo simulations to describe the formation time scales of ice mantles on bare grains in protostellar disks and massive protostars environments. Then we analytically describe these two systems in terms of grain populations subject to infall and turbulence, and assume steady-state. Results. Our results show that there is an extended region beyond the snow line where icy and bare grains can coexist, in both proto-planetary disks and massive protostars. This zone is not negligible compared to the total size of the objects: on the order of 0.4 AU for proto-planetary disks and 5400 AU for high-mass protostars. Times to reach the steady-state are respectively es- timated from 10^2 to 10^5 yr. Conclusions. The presence of a zone, a so-called snow border, in which bare and icy grains co- exist can have a major impact on our knowledge of protostellar environments. From a theoretical point of view, the progression of icy grains to bare grains as the temperature increases, could be a realistic way to model hot cores and hot corinos. Also, in this zone, the formation of planetesimals will require the coagulation of bare and icy grains. Observationally, this zone allows high abundances of gas phase species at large scales, for massive protostars particularly, even at low temperatures (down to 50 K).
• ### Water formation on bare grains: When the chemistry on dust impacts interstellar gas(1007.1061)

July 7, 2010 astro-ph.SR
Context. Water together with O2 are important gas phase ingredients to cool dense gas in order to form stars. On dust grains, H2 O is an important constituent of the icy mantle in which a complex chemistry is taking place, as revealed by hot core observations. The formation of water can occur on dust grain surfaces, and can impact gas phase composition. Aims. The formation of molecules such as OH, H2 O, HO2, H2 O2, as well as their deuterated forms and O2 and O3 is studied in order to assess how the chemistry varies in different astrophysical environments, and how the gas phase is affected by grain surface chemistry. Methods. We use Monte Carlo simulations to follow the formation of molecules on bare grains as well as the fraction of molecules released into the gas phase. We consider a surface reaction network, based on gas phase reactions, as well as UV photo-dissociation of the chemical species. Results. We show that grain surface chemistry has a strong impact on gas phase chemistry, and that this chemistry is very different for different dust grain temperatures. Low temperatures favor hydrogenation, while higher temperatures favor oxygenation. Also, UV photons dissociate the molecules on the surface, that can reform subsequently. The formation-destruction cycle increases the amount of species released into the gas phase. We also determine the time scales to form ices in diffuse and dense clouds, and show that ices are formed only in shielded environments, as supported by observations.
• ### HD and H2 formation in low-metallicity dusty gas clouds at high redshift(0901.0514)

Jan. 6, 2009 astro-ph.CO
Context: The HD and H2 molecules play important roles in the cooling of primordial and very metal-poor gas at high redshift. Aims: Grain surface and gas phase formation of HD and H2 is investigated to assess the importance of trace amounts of dust, 10^{-5}-10^{-3} Zo, in the production of HD and H2. Methods: We consider carbonaceous and silicate grains and include both physisorption and chemisorption, tunneling, and realistic grain surface barriers. We find, for a collapsing gas cloud environment with coupled chemical and thermal balance, that dust abundances as small as 10^{-5} solar lead to a strong boost in the H2 formation rate due to surface reactions. As a result of this enhancement in H2, HD is formed more efficiently in the gas phase through the D+ + H2 reaction. Direct formation of HD on dust grains cannot compete well with this gas phase process for dust temperatures below 150 K. We also derive up-to-date analytic fitting formulae for the grain surface formation of H2 and HD, including the different binding energies of H and D. Results: Grain surface reactions are crucial to the availability of H2 and HD in very metal-poor environments. Above metallicities of 10^{-5} solar, the grain surface route dominates the formation of H2, which in turn, drives the formation of HD in the gas phase. At dust temperatures above 150 K, laboratory experiments and theoretical modelling suggest that H2 formation on grains is suppressed while HD formation on grains is not.
• ### The role of carbon grains in the deuteration of H2(0802.3319)

Feb. 22, 2008 astro-ph
Aims: The production of molecular hydrogen and its deuterated forms onto carbonaceous dust grains is investigated in detail. The goal of this study is to estimate the importance of the chemistry occuring on grain surfaces for the deuteration of H2. Furthermore, we aim to find a robust and general surface chemical model which can be used in different astrophysical environments. Methods: Surface processes are described for the cases of graphitic and amorphous--carbon grains, where laboratory work is available. Langmuir--Hinshelwood as well as Eley--Rideal surface chemistries are included in the model and their relative contributions are highlighted. Analytic expressions are derived for H2, HD, and D2 formation efficiencies for both type of grains. Rate equations are tested against stochastic methods. Results: As expected, rate equations and stochastic methods diverge for grain sizes lower than a critical value acrit. For grain sizes below this critical value, D2 formation decreases to favour HD formation. The formation efficiencies of H2 and D2 can be calculated by adding a correction factor to the rate equations methods. We found that because of the presence of chemisorbed sites, which can store atoms to form molecules up to high grain temperatures, the formation efficiency of HD and D2 is very high compared to models where only physisorption sites are taken into account. When considering a realistic distribution of dust grains, we found that the formation rate of H2 and HD is enhanced by an order of magnitude if small grains are taken into account. The processes described in this paper, that allow a strong enhancement of the deuterated forms of molecular hydrogen, could explain the high degree of deuterium fractionation observed in protostellar environments.
• ### A low background Micromegas detector for the CAST experiment(physics/0510258)

Oct. 28, 2005 physics.ins-det
A low background Micromegas detector has been operating on the CAST experiment at CERN for the search of solar axions during the first phase of the experiment (2002-2004). The detector operated efficiently and achieved a very low level of background rejection ($5\times 10^{-5}$ counts keV$^{-1}$cm$^{-2}$s$^{-1}$) thanks to its good spatial and energy resolution as well as the low radioactivity materials used in the construction of the detector. For the second phase of the experiment (2005-2007), the detector will be upgraded by adding a shielding and including focusing optics. These improvements should allow for a background rejection better than two orders of magnitude.