
Various aspects of selfmotility of chemically active colloids in Newtonian
fluids can be captured by simple models for their chemical activity plus a
phoretic slip hydrodynamic boundary condition on their surface. For particles
of simple shapes (e.g., spheres)  as employed in many experimental studies 
which move at very low Reynolds numbers in an unbounded fluid, such models of
chemically active particles effectively map onto the well studied socalled
hydrodynamic squirmers [S. Michelin and E. Lauga, J. Fluid Mech. \textbf{747},
572 (2014)]. Accordingly, intuitively appealing analogies of
"pusher/puller/neutral" squirmers arise naturally. Within the framework of
selfdiffusiophoresis we illustrate the above mentioned mapping and the
corresponding flows in an unbounded fluid for a number of choices of the
activity function (i.e., the spatial distribution and the type of chemical
reactions across the surface of the particle). We use the central collision of
two active particles as a simple, paradigmatic case for demonstrating that in
the presence of other particles or boundaries the behavior of chemically active
colloids may be \textit{qualitatively} different, even in the far field, from
the one exhibited by the corresponding "effective squirmer", obtained from the
mapping in an unbounded fluid. This emphasizes that understanding the
collective behavior and the dynamics under geometrical confinement of
chemically active particles necessarily requires to explicitly account for the
dependence of the hydrodynamic interactions on the distribution of chemical
species resulting from the activity of the particles.

eASTROGAM (enhanced ASTROGAM) is a breakthrough Observatory space mission,
with a detector composed by a Silicon tracker, a calorimeter, and an
anticoincidence system, dedicated to the study of the nonthermal Universe in
the photon energy range from 0.3 MeV to 3 GeV  the lower energy limit can be
pushed to energies as low as 150 keV for the tracker, and to 30 keV for
calorimetric detection. The mission is based on an advanced spaceproven
detector technology, with unprecedented sensitivity, angular and energy
resolution, combined with polarimetric capability. Thanks to its performance in
the MeVGeV domain, substantially improving its predecessors, eASTROGAM will
open a new window on the nonthermal Universe, making pioneering observations
of the most powerful Galactic and extragalactic sources, elucidating the nature
of their relativistic outflows and their effects on the surroundings. With a
line sensitivity in the MeV energy range one to two orders of magnitude better
than previous generation instruments, eASTROGAM will determine the origin of
key isotopes fundamental for the understanding of supernova explosion and the
chemical evolution of our Galaxy. The mission will provide unique data of
significant interest to a broad astronomical community, complementary to
powerful observatories such as LIGOVirgoGEO600KAGRA, SKA, ALMA, EELT, TMT,
LSST, JWST, Athena, CTA, IceCube, KM3NeT, and LISA.

The influence of a chemically or electrically heterogeneous distribution of
interaction sites at a planar substrate on the number density of an adjacent
fluid is studied by means of classical density functional theory (DFT). In the
case of electrolyte solutions the effect of this heterogeneity is particularly
long ranged, because the corresponding relevant length scale is set by the
Debye length which is large compared to molecular sizes. The DFT used here
takes the solvent particles explicitly into account and thus captures
phenomena, inter alia, due to ionsolvent coupling. The present approach
provides closed analytic expressions describing the influence of chemically and
electrically nonuniform walls. The analysis of isolated \deltalike
interactions, isolated interaction patches, and hexagonal periodic
distributions of interaction sites reveals a sensitive dependence of the fluid
density profiles on the type of the interaction, as well as on the size and the
lateral distribution of the interaction sites.

The influence of a fluidfluid interface on selfphoresis of chemically
active, axially symmetric, spherical colloids is analyzed. Distinct from the
studies of selfphoresis for colloids trapped at fluid interfaces or in the
vicinity of hard walls, here we focus on the issue of selfphoresis close to a
fluidfluid interface. In order to provide physically intuitive results
highlighting the role played by the interface, the analysis is carried out for
the case that the symmetry axis of the colloid is normal to the interface;
moreover, thermal fluctuations are not taken into account. Similarly to what
has been observed near hard walls, we find that such colloids can be set into
motion even if their whole surface is homogeneously active. This is due to the
anisotropy along the direction normal to the interface owing to the
partitioning by diffusion, among the coexisting fluid phases, of the product of
the chemical reaction taking place at the colloid surface. Different from
results corresponding to hard walls, in the case of a fluid interface the
direction of motion, i.e., towards the interface or away from it, can be
controlled by tuning the physical properties of one of the two fluid phases.
This effect is analyzed qualitatively and quantitatively, both by resorting to
a farfield approximation and via an exact, analytical calculation which
provides the means for a critical assessment of the approximate analysis.

Using mesoscopic numerical simulations and analytical theory we investigate
the coarsening of the solvent structure around a colloidal particle emerging
after a temperature quench of the colloid surface. Qualitative differences in
the coarsening mechanisms are found, depending on the composition of the binary
liquid mixture forming the solvent and on the adsorption preferences of the
colloid. For an adsorptionwise neutral colloid, as function of time the phase
being next to its surface alternates. This behavior sets in on the scale of the
relaxation time of the solvent and is absent for colloids with strong
adsorption preferences. A Janus colloid, with a small temperature difference
between its two hemispheres, reveals an asymmetric structure formation and
surface enrichment around it, even if the solvent is within its onephase
region and if the temperature of the colloid is above the critical demixing
temperature $T_c$ of the solvent. Our phenomenological model turns out to
capture recent experimental findings according to which, upon laser
illumination of a Janus colloid and due to the ensuing temperature gradient
between its two hemispheres, the surrounding binary liquid mixture develops a
concentration gradient.

Selfphoretic Janus particles move by inducing  via nonequilibrium
chemical reactions occurring on their surfaces  changes in the chemical
composition of the solution in which they are immersed. This process leads to
gradients in chemical composition along the surface of the particle, as well as
along any nearby boundaries, including solid walls. Chemical gradients along a
wall can give rise to chemiosmosis, i.e., the gradients drive surface flows
which, in turn, drive flow in the volume of the solution. This bulk flow
couples back to the particle, and thus contributes to its selfmotility. Since
chemiosmosis strongly depends on the molecular interactions between the
diffusing molecular species and the wall, the response flow induced and
experienced by a particle encodes information about any chemical patterning of
the wall. Here, we extend previous studies on selfphoresis of a sphere near a
chemically patterned wall to the case of particles with elongated shape. We
focus our analysis on the new phenomenology potentially emerging from the
coupling  which is inoperative for a spherical shape  of the elongated
particle to the strain rate tensor of the chemiosmotic flow. Via numerical
calculations, we show that the dynamics of a rodlike particle exhibits a novel
"edgefollowing" steady state: the particle translates along the edge of a
chemical step at a steady distance from the step and with a steady orientation.
Within a certain range of system parameters, the edgefollowing state coexists
with a "docking" state (the particle stops at the step, oriented perpendicular
to the step edge), i.e., a bistable dynamics occurs. These findings are
rationalized as a consequence of the competition between fluid vorticity and
the rate of strain by using analytical theory based on the pointparticle
approximation which captures quasiquantitatively the dynamics of the system.

The effect of imposing a constraint on a fluctuating scalar order parameter
field in a system of finite volume is studied within statistical field theory.
The canonical ensemble, corresponding to a fixed total integrated order
parameter, is obtained as a special case of the theory. A perturbative
expansion is developed which allows one to systematically determine the
constraintinduced finitevolume corrections to the free energy and to
correlation functions. In particular, we focus on the LandauGinzburg model in
a film geometry (i.e., a rectangular parallelepiped with a small aspect ratio)
with periodic, Dirichlet, or Neumann boundary conditions in the transverse
direction and periodic boundary conditions in the remaining, lateral
directions. Within the expansion in terms of $\epsilon=4d$, where $d$ is the
spatial dimension of the bulk, the finitesize contribution to the free energy
and the associated critical Casimir force are calculated to leading order in
$\epsilon$ and are compared to the corresponding expressions for an
unconstrained (grand canonical) system. The constraint restricts the
fluctuations within the system and it accordingly modifies the residual
finitesize free energy. The resulting Casimir force is shown to depend on
whether it is defined by assuming a fixed transverse area or a fixed total
volume. In the former case, the constraint is typically found to significantly
enhance the attractive character of the force as compared to the grand
canonical case. In contrast to the grand canonical Casimir force, which, for
supercritical temperatures, vanishes in the limit of thick films, the canonical
Casimir force defined for fixed transverse area attains for thick films a
negative value for all boundary conditions studied here. Typically, the
dependence of the Casimir force both on the temperature and on the fieldlike
scaling variables is different in the two ensembles.

Within mean field theory, we investigate the bridging transition between a
pair of parallel cylindrical colloids immersed in a binary liquid mixture as a
solvent which is close to its critical consolute point $T_c$. We determine the
universal scaling functions of the effective potential and of the force between
the colloids. For a solvent which is at the critical concentration and close to
$T_c$, we find that the critical Casimir force is the dominant interaction at
close separations. This agrees very well with the corresponding Derjaguin
approximation for the effective interaction between the two cylinders, while
capillary forces originating from the extension of the liquid bridge turn out
to be more important at large separations. In addition, we are able to infer
from the wetting characteristics of the individual colloids the firstorder
transition of the liquid bridge connecting two colloidal particles to the
ruptured state. While specific to cylindrical colloids, the results presented
here provide also an outline for identifying critical Casimir forces acting on
bridged colloidal particles as such, and for analyzing the bridging transition
between them.

Within the PoissonBoltzmann (PB) approach electrolytes in contact with
planar, spherical, and cylindrical electrodes are analyzed systematically. The
dependences of their capacitance $C$ on the surface charge density $\sigma$ and
the ionic strength $I$ are examined as function of the wall curvature. The
surface charge density has a strong effect on the capacitance for small
curvatures whereas for large curvatures the behavior becomes independent of
$\sigma$. An expansion for small curvatures gives rise to capacitance
coefficients which depend only on a single parameter, allowing for a convenient
analysis. The universal behavior at large curvatures can be captured by an
analytic expression.

Density functional theory is used to describe electrolyte solutions in
contact with electrodes of planar or spherical shape. For the electrolyte
solutions we consider the socalled civilized model, in which all species
present are treated on equal footing. This allows us to discuss the features of
the electric double layer in terms of the differential capacitance. The model
provides insight into the microscopic structure of the electric double layer,
which goes beyond the mesoscopic approach studied in the accompanying paper.
This enables us to judge the relevance of microscopic details, such as the
radii of the particles forming the electrolyte solutions or the dipolar
character of the solvent particles, and to compare the predictions of various
models. Similar to the preceding paper, a general behavior is observed for
small radii of the electrode in that in this limit the results become
independent of the surface charge density and of the particle radii. However,
for large electrode radii nontrivial behaviors are observed. Especially the
particle radii and the surface charge density strongly influence the
capacitance. From the comparison with the PoissonBoltzmann approach it becomes
apparent that the shape of the electrode determines whether the microscopic
details of the full civilized model have to be taken into account or whether
already simpler models yield acceptable predictions.

We investigate the effect of quenched surface disorder on effective
interactions between two planar surfaces immersed in fluids which are near
criticality and belong to the Ising bulk universality class. We consider the
case that, in the absence of random surface fields, the surfaces of the film
belong to the surface universality class of the socalled ordinary transition.
We find analytically that in the linear weakcoupling regime, i.e., upon
including the meanfield contribution and Gaussian fluctuations, the presence
of random surface fields with zero mean leads to an attractive,
disorderinduced contribution to the critical Casimir interactions between the
two confining surfaces. Our analytical, fieldtheoretic results are compared
with corresponding Monte Carlo simulation data.

We study a mesoscopic model of a chemically active colloidal particle which
on certain parts of its surface promotes chemical reactions in the surrounding
solution. For reasons of simplicity and conceptual clarity, we focus on the
case in which only electrically neutral species are present in the solution and
on chemical reactions which are described by first order kinetics. Within a
selfconsistent approach we explicitly determine the steady state product and
reactant number density fields around the colloid as functionals of the
interaction potentials of the various molecular species in solution with the
colloid. By using Teubner's reciprocal theorem, this allows us to compute and
to interpret  in a transparent way in terms of the classical Smoluchowski
theory of chemical kinetics  the external force needed to keep such a
catalytically active colloid at rest (\textit{stall} force) or, equivalently,
the corresponding velocity of the colloid \textit{if} it is free to move. We
use the particular case of triangularwell interaction potentials as a
benchmark example for applying the general theoretical framework developed
here. For this latter case, we derive explicit expressions for the dependences
of the quantities of interest on the diffusion coefficients of the chemical
species, the reaction rate constant, the coverage by catalyst, the size of the
colloid, as well as on the parameters of the interaction potentials. These
expressions provide a detailed picture of the phenomenology associated with
catalyticallyactive colloids and selfdiffusiophoresis.

Catalytically active Janus particles suspended in solution create gradients
in the chemical composition of the solution along their surfaces, as well as
along any nearby container walls. The former leads to selfphoresis, while the
latter gives rise to chemiosmosis, providing an additional contribution to
selfmotility. Chemiosmosis strongly depends on the molecular interactions
between the diffusing chemical species and the wall. We show analytically,
using an approximate "pointparticle" approach, that by chemically patterning a
planar substrate one can direct the motion of Janus particles: the induced
chemiosmotic flows can cause particles to either "dock" at the chemical step
between the two materials, or to follow a chemical stripe. These theoretical
predictions are confirmed by full numerical calculations. Generically, docking
occurs for particles which tend to move away from their catalytic caps, while
stripefollowing occurs in the opposite case. Our analysis reveals the physical
mechanisms governing this behavior.

Chemically active colloids move by creating gradients in the composition of
the surrounding solution and by exploiting the differences in their
interactions with the various molecular species in solution. If such particles
move near boundaries, e.g., the walls of the container confining the
suspension, gradients in the composition of the solution are also created along
the wall. This give rise to chemiosmosis (via the interactions of the wall
with the molecular species forming the solution), which drives flows coupling
back to the colloid and thus influences its motility. Employing an approximate
"pointparticle" analysis, we show analytically that  owing to this kind of
induced active response (chemiosmosis) of the wall  such chemically active
colloids can align with, and follow, gradients in the surface chemistry of the
wall. In this sense, these artificial "swimmers" exhibit a primitive form of
thigmotaxis with the meaning of sensing the proximity of a (not necessarily
discontinuous) physical change in the environment. We show that the alignment
with the surfacechemistry gradient is generic for chemically active colloids
as long as they exhibit motility in an unbounded fluid, i.e., this phenomenon
does not depend on the exact details of the propulsion mechanism. The results
are discussed in the context of simple models of chemical activity,
corresponding to Janus particles with "source" chemical reactions on one half
of the surface and either "inert" or "sink" reactions over the other half.

The effective electrostatic interaction between a pair of colloids, both of
them located close to each other at an electrolyte interface, is studied by
employing the full, nonlinear PoissonBoltzmann (PB) theory within classical
density functional theory. Using a simplified yet appropriate model, all
contributions to the effective interaction are obtained exactly, albeit
numerically. The comparison between our results and those obtained within
linearized PB theory reveals that the latter overestimates these contributions
significantly at short interparticle separations. Whereas the surface
contributions to the linear and the nonlinear PB results differ only
quantitatively, the line contributions show qualitative differences at short
separations. Moreover, a dependence of the line contribution on the solvation
properties of the two adjacent fluids is found, which is absent within the
linear theory. Our results are expected to enrich the understanding of
effective interfacial interactions between colloids.

Critical properties of a liquid film between two planar walls are
investigated in the canonical ensemble, within which the total number of
particles, rather than their chemical potential, is kept constant. The effect
of this constraint is analyzed within mean field theory (MFT) based on a
GinzburgLandau free energy functional as well as via Monte Carlo simulations
of the 3D Ising model with fixed total magnetization. Within MFT and for finite
adsorption strengths at the walls, the thermodynamic properties of the film in
the canonical ensemble can be mapped exactly onto a grand canonical ensemble in
which the corresponding chemical potential plays the role of the Lagrange
multiplier associated with the constraint. However, due to a nonintegrable
divergence of the mean field order parameter profile near a wall, the limit of
infinitely strong adsorption turns out to be not welldefined within MFT,
because it would necessarily violate the constraint. The critical Casimir force
(CCF) acting on the two planar walls of the film is generally found to behave
differently in the canonical and grand canonical ensembles. For instance, the
canonical CCF in the presence of equal preferential adsorption at the two walls
is found to have the opposite sign and a slower decay behavior as a function of
the film thickness compared to its grand canonical counterpart. We derive the
stress tensor in the canonical ensemble and find that it has the same
expression as in the grand canonical case, but with the chemical potential
playing the role of the Lagrange multiplier associated with the constraint. The
different behavior of the CCF in the two ensembles is rationalized within MFT
by showing that, for a prescribed value of the thermodynamic control parameter
of the film, i.e., density or chemical potential, the film pressures are
identical in the two ensembles, while the corresponding bulk pressures are not.

Chemically active colloids generate changes in the chemical composition of
their surrounding solution and thereby induce flows in the ambient fluid which
affect their dynamical evolution. Here we study the manybody dynamics of a
monolayer of active particles trapped at a fluidfluid interface. To this end
we consider a meanfield model which incorporates the direct pair interaction
(including also the capillary interaction which is caused specifically by the
interfacial trapping) as well as the effect of hydrodynamic interactions
(including the Marangoni flow induced by the response of the interface to the
chemical activity). The values of the relevant physical parameters for typical
experimental realizations of such systems are estimated and various scenarios,
which are predicted by our approach for the dynamics of the monolayer, are
discussed. In particular, we show that the chemicallyinduced Marangoni flow
can prevent the clustering instability driven by the capillary attraction.

The dynamic and static critical behavior of five binary LennardJones liquid
mixtures, close to their continuous demixing points (belonging to the socalled
model H' dynamic universality class), are studied computationally by combining
semigrand canonical Monte Carlo simulations and largescale molecular dynamics
(MD) simulations, accelerated by graphic processing units (GPU). The symmetric
binary liquid mixtures considered cover a variety of densities, a wide range of
compressibilities, and various interactions between the unlike particles. The
static quantities studied here encompass the bulk phase diagram (including both
the binodal and the $\lambda$line), the correlation length, the concentration
susceptibility, the compressibility of the finitesized systems at the bulk
critical temperature $T_c$, and the pressure. Concerning the collective
transport properties, we focus on the Onsager coefficient and the shear
viscosity. The critical powerlaw singularities of these quantities are
analyzed in the mixed phase (above $T_c$) and nonuniversal critical amplitudes
are extracted. Two universal amplitude ratios are calculated. The first one
involves static amplitudes only and agrees well with the expectations for the
threedimensional Ising universality class. The second ratio includes also
dynamic critical amplitudes and is related to the EinsteinKawasaki relation
for the interdiffusion constant. Precise estimates of this amplitude ratio are
difficult to obtain from MD simulations, but within the error bars our results
are compatible with theoretical predictions and experimental values for model
H'. Evidence is reported for an inverse proportionality of the pressure and the
isothermal compressibility at the demixing transition, upon varying either the
number density or the repulsion strength between unlike particles.

Recent experimental realizations of the critical Casimir effect have been
implemented by monitoring colloidal particles immersed in a binary liquid
mixture near demixing and exposed to a chemically structured substrate. In
particular, critical Casimir forces have been measured for surfaces consisting
of stripes with periodically alternating adsorption preferences, forming
chemical steps between them. Motivated by these experiments, we analyze the
contribution of such chemical steps to the critical Casimir force for the film
geometry and within the Ising universality class. By means of Monte Carlo
simulations, meanfield theory, and finitesize scaling analysis we determine
the universal scaling function associated with the contribution to the critical
Casimir force due to individual, isolated chemical steps facing a surface with
homogeneous adsorption preference or with Dirichlet boundary condition. In line
with previous findings, these results allow one to compute the critical Casimir
force for the film geometry and in the presence of arbitrarily shaped, but wide
stripes. In this latter limit the force decomposes into a sum of the
contributions due to the two homogeneous parts of the surface and due to the
chemical steps between the stripes. We assess this decomposition by comparing
the resulting sum with actual simulation data for the critical Casimir force in
the presence of a chemically striped substrate.

At the end of March 2015 the onboard software configuration of the AGILE
satellite was modified in order to disable the veto signal of the
anticoincidence shield for the minicalorimeter instrument. The motivation for
such a change was the understanding that the dead time induced by the
anticoincidence prevented the detection of a large fraction of Terrestrial
GammaRay Flashes (TGFs). The configuration change was highly successful
resulting in an increase of one order of magnitude in TGF detection rate. As
expected, the largest fraction of the new events has short duration ($< 100
\mathrm {\mu s}$), and part of them has simultaneous association with lightning
sferics detected by the World Wide Lightning Location Network (WWLLN). The new
configuration provides the largest TGF detection rate surface density
(TGFs/$\mathrm{km^2}$/year) to date, opening prospects for improved correlation
studies with lightning and atmospheric parameters on short spatial and temporal
scales along the equatorial region.

Recently there is strong experimental and theoretical interest in studying
the selfassembly and the phase behavior of patchy and of Janus particles,
which form colloidal suspensions. Although in this quest a variety of effective
interactions have been proposed and used in order to achieve directed assembly,
the critical Casimir effect stands out as being particularly suitable in this
respect because it provides both attractive and repulsive interactions as well
as the potential of a sensitive temperature control of their strength.
Specifically, we have calculated the critical Casimir force between a single
Janus particle and a laterally homogeneous substrate as well as a substrate
with a chemical step. We have used the Derjaguin approximation and compared it
with results from full mean field theory. A modification of the Derjaguin
approximation turns out to be generally reliable. Based on this approach we
have derived the effective force and the effective potential between two Janus
cylinders as well as between two Janus spheres.

For active particles the interplay between the selfgenerated hydrodynamic
flow and an external shear flow, especially near bounding surfaces, can result
in a rich behavior of the particles not easily foreseen from the consideration
of the active and external driving mechanisms in isolation. For instance, under
certain conditions, the particles exhibit "rheotaxis," i.e., they align their
direction of motion with the plane of shear spanned by the direction of the
flow and the normal of the bounding surface and move with or against the flow.
To date, studies of rheotaxis have focused on elongated particles (e.g.,
spermatozoa), for which rheotaxis can be understood intuitively in terms of a
"weather vane" mechanism. Here we investigate the possibility that spherical
active particles, for which the "weather vane" mechanism is excluded due to the
symmetry of the shape, may nevertheless exhibit rheotaxis. Combining analytical
and numerical calculations, we show that, for a broad class of spherical active
particles, rheotactic behavior may emerge via a mechanism which involves
"selftrapping" near a hard wall owing to the active propulsion of the
particles, combined with their rotation, alignment, and "locking" of the
direction of motion into the shear plane. In this state, the particles move
solely up or downstream at a steady height and orientation.

Micronsized particles moving through solution in response to selfgenerated
chemical gradients serve as model systems for studying active matter. Their
farreaching potential applications will require the particles to sense and
respond to their local environment in a robust manner. The selfgenerated
hydrodynamic and chemical fields, which induce particle motion, probe and are
modified by that very environment, including confining boundaries. Focusing on
a catalytically active Janus particle as a paradigmatic example, we predict
that near a hard planar wall such a particle exhibits several scenarios of
motion: reflection from the wall, motion at a steadystate orientation and
height above the wall, or motionless, steady "hovering." Concerning the steady
states, the height and the orientation are determined both by the proportion of
catalyst coverage and the interactions of the solutes with the different
"faces" of the particle. Accordingly, we propose that a desired behavior can be
selected by tuning these parameters via a judicious design of the particle
surface chemistry.

If an active Janus particle is trapped at the interface between a liquid and
a fluid, its selfpropelled motion along the interface is affected by a net
torque on the particle due to the viscosity contrast between the two adjacent
fluid phases. For a simple model of an active, spherical Janus colloid we
analyze the conditions under which translation occurs along the interface and
we provide estimates of the corresponding persistence length. We show that
under certain conditions the persistence length of such a particle is
significantly larger than the corresponding one in the bulk liquid, which is in
line with the trends observed in recent experimental studies.

The threephase contact line formed by the intersection of a liquidvapor
interface of an electrolyte solution with a charged planar substrate is studied
in terms of classical density functional theory applied to a lattice model. The
influence of the substrate charge density and of the ionic strength of the
solution on the intrinsic structure of the threephase contact line and on the
corresponding line tension is analyzed. We find a negative line tension for all
values of the surface charge density and of the ionic strength considered. The
strength of the line tension decreases upon decreasing the contact angle via
varying either the temperature or the substrate charge density.