• ### Roadmap for the international, accelerator-based neutrino programme(1704.08181)

April 26, 2017 hep-ph, hep-ex, physics.ins-det
In line with its terms of reference the ICFA Neutrino Panel has developed a roadmapfor the international, accelerator-based neutrino programme. A "roadmap discussion document" was presented in May 2016 taking into account the peer-group-consultation described in the Panel's initial report. The "roadmap discussion document" was used to solicit feedback from the neutrino community---and more broadly, the particle- and astroparticle-physics communities---and the various stakeholders in the programme. The roadmap, the conclusions and recommendations presented in this document take into account the comments received following the publication of the roadmap discussion document. With its roadmap the Panel documents the approved objectives and milestones of the experiments that are presently in operation or under construction. Approval, construction and exploitation milestones are presented for experiments that are being considered for approval. The timetable proposed by the proponents is presented for experiments that are not yet being considered formally for approval. Based on this information, the evolution of the precision with which the critical parameters governinger the neutrino are known has been evaluated. Branch or decision points have been identified based on the anticipated evolution in precision. The branch or decision points have in turn been used to identify desirable timelines for the neutrino-nucleus cross section and hadro-production measurements that are required to maximise the integrated scientific output of the programme. The branch points have also been used to identify the timeline for the R&D required to take the programme beyond the horizon of the next generation of experiments. The theory and phenomenology programme, including nuclear theory, required to ensure that maximum benefit is derived from the experimental programme is also discussed.
• ### On the complementarity of Hyper-K and LBNF(1501.03918)

Jan. 16, 2015 hep-ex, physics.acc-ph
The next generation of long-baseline experiments is being designed to make a substantial step in the precision of measurements of neutrino-oscillation probabilities. Two qualitatively different proposals, Hyper-K and LBNF, are being considered for approval. This document outlines the complimentarity between Hyper-K and LBNF.
• ### Initial report from the ICFA Neutrino Panel(1405.7052)

In July 2013 ICFA established the Neutrino Panel with the mandate "To promote international cooperation in the development of the accelerator-based neutrino-oscillation program and to promote international collaboration in the development a neutrino factory as a future intense source of neutrinos for particle physics experiments". This, the Panel's Initial Report, presents the conclusions drawn by the Panel from three regional "Town Meetings" that took place between November 2013 and February 2014. After a brief introduction and a short summary of the status of the knowledge of the oscillation parameters, the report summarises the approved programme and identifies opportunities for the development of the field. In its conclusions, the Panel recognises that to maximise the discovery potential of the accelerator-based neutrino-oscillation programme it will be essential to exploit the infrastructures that exist at CERN, FNAL and J-PARC and the expertise and resources that reside in laboratories and institutes around the world. Therefore, in its second year, the Panel will consult with the accelerator-based neutrino-oscillation community and its stakeholders to: develop a road-map for the future accelerator-based neutrino-oscillation programme that exploits the ambitions articulated at CERN, FNAL and J-PARC and includes the programme of measurement and test-beam exposure necessary to ensure the programme is able to realise its potential; develop a proposal for a coordinated "Neutrino RD" programme, the accelerator and detector R&D programme required to underpin the next generation of experiments; and to explore the opportunities for the international collaboration necessary to realise the Neutrino Factory.
• This document represents the response of the Intensity Frontier Neutrino Working Group to the Snowmass charge. We summarize the current status of neutrino physics and identify many exciting future opportunities for studying the properties of neutrinos and for addressing important physics and astrophysics questions with neutrinos.
• ### MICE: the Muon Ionization Cooling Experiment. Step I: First Measurement of Emittance with Particle Physics Detectors(1110.1813)

July 30, 2013 hep-ex, physics.acc-ph
The Muon Ionization Cooling Experiment (MICE) is a strategic R&D project intended to demonstrate the only practical solution to providing high brilliance beams necessary for a neutrino factory or muon collider. MICE is under development at the Rutherford Appleton Laboratory (RAL) in the United Kingdom. It comprises a dedicated beamline to generate a range of input muon emittances and momenta, with time-of-flight and Cherenkov detectors to ensure a pure muon beam. The emittance of the incoming beam will be measured in the upstream magnetic spectrometer with a scintillating fiber tracker. A cooling cell will then follow, alternating energy loss in Liquid Hydrogen (LH2) absorbers to RF cavity acceleration. A second spectrometer, identical to the first, and a second muon identification system will measure the outgoing emittance. In the 2010 run at RAL the muon beamline and most detectors were fully commissioned and a first measurement of the emittance of the muon beam with particle physics (time-of-flight) detectors was performed. The analysis of these data was recently completed and is discussed in this paper. Future steps for MICE, where beam emittance and emittance reduction (cooling) are to be measured with greater accuracy, are also presented.
• The Proceedings of the 2011 workshop on Fundamental Physics at the Intensity Frontier. Science opportunities at the intensity frontier are identified and described in the areas of heavy quarks, charged leptons, neutrinos, proton decay, new light weakly-coupled particles, and nucleons, nuclei, and atoms.
• ### Muon colliders and neutrino factories(1202.2140)

Feb. 9, 2012 physics.acc-ph
Over the last decade there has been significant progress in developing the concepts and technologies needed to produce, capture and accelerate O(1021) muons/year. This development prepares the way for a new type of neutrino source (Neutrino Factory) and a new type of very high energy lepton-antilepton collider (Muon Collider). This article reviews the motivation, design and R&D for Neutrino Factories and Muon Colliders.
• The International Design Study for the Neutrino Factory (the IDS-NF) was established by the community at the ninth "International Workshop on Neutrino Factories, super-beams, and beta- beams" which was held in Okayama in August 2007. The IDS-NF mandate is to deliver the Reference Design Report (RDR) for the facility on the timescale of 2012/13. In addition, the mandate for the study [3] requires an Interim Design Report to be delivered midway through the project as a step on the way to the RDR. This document, the IDR, has two functions: it marks the point in the IDS-NF at which the emphasis turns to the engineering studies required to deliver the RDR and it documents baseline concepts for the accelerator complex, the neutrino detectors, and the instrumentation systems. The IDS-NF is, in essence, a site-independent study. Example sites, CERN, FNAL, and RAL, have been identified to allow site-specific issues to be addressed in the cost analysis that will be presented in the RDR. The choice of example sites should not be interpreted as implying a preferred choice of site for the facility.
• ### From Neutrino Factory to Muon Collider(1006.0923)

June 4, 2010 physics.acc-ph
Both Muon Colliders and Neutrino Factories require a muon source capable of producing and capturing O(10^21) muons/year. This paper reviews the similarities and differences between Neutrino Factory and Muon Collider accelerator complexes, the ongoing R&D needed for a Muon Collider that goes beyond Neutrino Factory R&D, and some thoughts about how a Neutrino Factory on the CERN site might eventually be upgraded to a Muon Collider.
• ### Using the Fermilab Proton Source for a Muon to Electron Conversion Experiment(physics/0611124)

Nov. 13, 2006 physics.acc-ph
The Fermilab proton source is capable of providing 8 GeV protons for both the future long-baseline neutrino program (NuMI), and for a new program of low energy muon experiments. In particular, if the 8 GeV protons are rebunched and then slowly extracted into an external beamline, the resulting proton beam would be suitable for a muon-to-electron conversion experiment designed to improve on the existing sensitivity by three orders of magnitude. We describe a scheme for the required beam manipulations. The scheme uses the Accumulator for momentum stacking, and the Debuncher for bunching and slow extraction. This would permit simultaneous operation of the muon program with the future NuMI program, delivering 10^20 protons per year at 8 GeV for the muon program at the cost of a modest (~10%) reduction in the protons available to the neutrino program.
• ### Physics at a New Fermilab Proton Driver(hep-ph/0604024)

April 3, 2006 hep-ph
In 2004, motivated by the recent exciting developments in neutrino physics, the Fermilab Long Range Planning Committee identified a new high intensity Proton Driver as an attractive option for the future. At the end of 2004 the APS Study on the Physics of Neutrinos'' concluded that the future U.S. neutrino program should have, as one of its components, A proton driver in the megawatt class or above and neutrino superbeam with an appropriate very large detector capable of observing CP violation and measuring the neutrino mass-squared differences and mixing parameters with high precision''. The presently proposed Fermilab Proton Driver is designed to accomplish these goals, and is based on, and would help develop, Linear Collider technology. In this paper the Proton Driver parameters are summarized, and the potential physics program is described.
• ### Physics at an Upgraded Fermilab Proton Driver(hep-ph/0507223)

Aug. 11, 2005 hep-ph
In 2004 the Fermilab Long Range Planning Committee identified a new high intensity Proton Driver as an attractive option for the future, primarily motivated by the recent exciting developments in neutrino physics. Over the last few months a physics study has developed the physics case for the Fermilab Proton Driver. The potential physics opportunities are discussed.
• ### Neutral currents and tests of three-neutrino unitarity in long-baseline experiments(hep-ph/0407140)

July 12, 2004 hep-ph
We examine a strategy for using neutral current measurements in long-baseline neutrino oscillation experiments to put limits on the existence of more than three light, active neutrinos. We determine the relative contributions of statistics, cross section uncertainties, event misidentification and other systematic errors to the overall uncertainty of these measurements. As specific case studies, we make simulations of beams and detectors that are like the K2K, T2K, and MINOS experiments. We find that the neutral current cross section uncertainty and contamination of the neutral current signal by charge current events allow a sensitivity for determining the presence of sterile neutinos at the 0.10--0.15 level in probablility.
• ### Detector R&D for future Neutrino Experiments with the NuMI Beamline(hep-ex/0304017)

April 9, 2003 hep-ex
A report to the Fermilab Director from the Study Group on Future Neutrino Experiments at Fermilab
• ### Neutrino Factories: Physics Potential(hep-ph/0210113)

Oct. 7, 2002 hep-ph
The physics potential of low-performance and high-performance neutrino factories is briefly reviewed..
• ### Neutrino Factory Designs and R&D(hep-ex/0207036)

July 15, 2002 hep-ex
European, Japanese, and US Neutrino Factory designs are presented. The main R&D issues, and the associated R&D programs, are discussed.
• ### Comparison of LMA and LOW Solar Solution Predictions in an SO(10) GUT Model(hep-ph/0112171)

Feb. 15, 2002 hep-ph, hep-ex
Within the framework of an SO(10) GUT model that can accommodate both the LMA and LOW solar neutrino mixing solutions by appropriate choice of the right-handed Majorana matrix elements, we present explicit predictions for the neutrino oscillation parameters \Delta m^2_{21}, \sin^2 2\theta_{12}, \sin^2 2\theta_{23}, \sin^2 2\theta_{13}, and \delta_{CP}. Given the observed near maximality of the atmospheric mixing, the model favors the LMA solution and predicts that \delta_{CP} is small. The suitability of Neutrino Superbeams and Neutrino Factories for precision tests of the two model versions is discussed.
• ### Progress in Absorber R&D 2: Windows(physics/0108028)

Aug. 17, 2001 hep-ph, physics.acc-ph
A program is underway to develop liquid-hydrogen energy absorbers for ionization cooling of muon-beam transverse emittance. Minimization of multiple-scattering-induced beam heating requires thin windows. The first window prototype has been destructively tested, validating the finite-element-analysis model and the design approach.
• ### Exploring Neutrino Oscillations with Superbeams(hep-ph/0012017)

April 27, 2001 hep-ph
We consider the medium- and long-baseline oscillation physics capabilities of intense muon-neutrino and muon-antineutrino beams produced using future upgraded megawatt-scale high-energy proton beams. In particular we consider the potential of these conventional neutrino superbeams'' for observing \nu_\mu\to\nu_e oscillations, determining the hierarchy of neutrino mass eigenstates, and measuring CP-violation in the lepton sector. The physics capabilities of superbeams are explored as a function of the beam energy, baseline, and the detector parameters. The trade-offs between very large detectors with poor background rejection and smaller detectors with excellent background rejection are illustrated. We find that it may be possible to observe \nu_\mu\to\nu_e oscillations with a superbeam provided that the amplitude parameter \sin^2 2\theta_{13} is larger than a few \times 10^{-3}. If \sin^2 2\theta_{13} is of order 10^{-2} or larger, then the neutrino mass hierarchy can be determined in long-baseline experiments, and if in addition the large mixing angle MSW solution describes the solar neutrino deficit then there is a small region of parameter space within which maximal CP-violation in the lepton sector would be observable in a low-energy medium-baseline experiment. We explicitly consider massive water Cherenkov and liquid argon detectors at superbeams with neutrino energies ranging from 1 GeV to 15 GeV, and baselines from 295 km to 9300 km. Finally, we compare the oscillation physics prospects at superbeams with the corresponding prospects at neutrino factories. The sensitivity at a neutrino factory to CP violation and the neutrino mass hierarchy extends to values of the amplitude parameter \sin^2 2\theta_{13} that are one to two orders of magnitude lower than at a superbeam.
• ### Physics at a Neutrino Factory(hep-ex/0008064)

Aug. 31, 2000 hep-ph, hep-ex
In response to the growing interest in building a Neutrino Factory to produce high intensity beams of electron- and muon-neutrinos and antineutrinos, in October 1999 the Fermilab Directorate initiated two six-month studies. The first study, organized by N. Holtkamp and D. Finley, was to investigate the technical feasibility of an intense neutrino source based on a muon storage ring. This design study has produced a report in which the basic conclusion is that a Neutrino Factory is technically feasible, although it requires an aggressive R&D program. The second study, which is the subject of this report, was to explore the physics potential of a Neutrino Factory as a function of the muon beam energy and intensity, and for oscillation physics, the potential as a function of baseline.
• ### Short-Baseline Neutrino Oscillations at a Neutrino Factory(hep-ph/0007181)

July 17, 2000 hep-ph
Within the framework of three-neutrino and four-neutrino scenarios that can describe the results of the LSND experiment, we consider the capabilities of short baseline neutrino oscillation experiments at a neutrino factory. We find that, when short baseline ($L \alt 100$ km) neutrino factory measurements are used together with other accelerator-based oscillation results, the complete three-neutrino parameter space can best be determined by measuring the rate of $\nu_e \to \nu_\tau$ oscillations, and measuring CP violation with either $\nu_e \to \nu_\mu$ or $\nu_\mu \to \nu_\tau$ oscillations (including the corresponding antineutrino channels). With measurements of CP violation in both $\nu_e \to \nu_\mu$ and $\nu_\mu \to \nu_\tau$ it may be possible to distinguish between the three- and four-neutrino cases.
• ### Determination of the pattern of neutrino masses at a Neutrino Factory(hep-ph/0004208)

May 18, 2000 hep-ph, hep-ex
We study the precision to which the sign of \delta m_{32}^2 can be determined at a neutrino factory, as a function of stored energies and baselines. This is done by simultaneously fitting the channels \nu_\mu \to \nu_\mu\$, \bar\nu_e \to \bar\nu_\mu from \mu^- decays and the channels \bar\nu_\mu \to \bar\nu_\mu, \nu_e \to \nu_\mu from \mu^+ decays. We investigate the sensitivity reach in the parameter \sin^22\theta_{13} to which one can determine the sign of \delta m_{32}^2 to 3 standard deviations as a function of the baseline length and magnitude of \delta m_{32}^2 with a 20 GeV muon storage ring. We find that for baselines longer than 2000 km, the sign of \delta m^2_{32} can be determined for \sin^22\theta_{13} down to the 10^{-3} level with 10^{20} decays of 20 GeV muons.
• ### Long-Baseline Study of the Leading Neutrino Oscillation at a Neutrino Factory(hep-ph/9911524)

March 17, 2000 hep-ph, hep-ex
Within the framework of three-flavor neutrino oscillations, we consider the physics potential of \nu_e --> \nu_\mu appearance and \nu_\mu --> \nu_\mu survival measurements at a neutrino factory for a leading oscillation scale \delta m^2 ~ 3.5 \times 10^{-3} eV^2. Event rates are evaluated versus baseline and stored muon energy, and optimal values discussed. Over a sizeable region of oscillation parameter space, matter effects would enable the sign of \delta m^2 to be determined from a comparison of \nu_e --> \nu_\mu with \bar\nu_e --> \bar\nu_\mu event rates and energy distributions. It is important, therefore, that both positive and negative muons can be stored in the ring. Measurements of the \nu_\mu --> \nu_\mu survival spectrum could determine the magnitude of \delta m^2 and the leading oscillation amplitude with a precision of O(1%--2%).
• ### Search for antiproton decay at the Fermilab Antiproton Accumulator(hep-ex/9908036)

March 1, 2000 hep-ex
A search for antiproton decay has been made at the Fermilab Antiproton Accumulator. Limits are placed on thirteen antiproton decay modes. The results include the first explicit experimental limits on the muonic decay modes of the antiproton, and the first limits on the decay modes e- gamma gamma, and e- omega. The most stringent limit is for the decay mode pbar-> e- gamma. At 90% C.L. we find that tau/B(pbar-> e- gamma) > 7 x 10^5 yr. The most stringent limit for decay modes with a muon in the final state is for the decay pbar-> mu- gamma. At 90% C.L. we find that tau/B(pbar-> mu- gamma) > 5 x 10^4 yr.
• ### A New Limit on CPT Violation(hep-ex/9910013)

Oct. 6, 1999 hep-ex
A search for antiproton decay has been made at the Fermilab Antiproton Accumulator. Limits are placed on fifteen antiproton decay modes. The results are used to place limits on the characteristic mass scale Mx that could be associated with CPT-violation accompanied by baryon number violation.