• ### Particle identification studies with a full-size 4-GEM prototype for the ALICE TPC upgrade(1805.03234)

May 8, 2018 physics.ins-det
A large Time Projection Chamber is the main device for tracking and charged-particle identification in the ALICE experiment at the CERN LHC. After the second long shutdown in 2019/20, the LHC will deliver Pb beams colliding at an interaction rate of about 50 kHz, which is about a factor of 50 above the present readout rate of the TPC. This will result in a significant improvement on the sensitivity to rare probes that are considered key observables to characterize the QCD matter created in such collisions. In order to make full use of this luminosity, the currently used gated Multi-Wire Proportional Chambers will be replaced by continuously operated readout detectors employing Gas Electron Multiplier technology, while retaining the performance in terms of particle identification via the measurement of the specific energy loss by ionization d$E$/d$x$. A full-size readout chamber prototype was assembled in 2014 featuring a stack of four GEM foils as an amplification stage. The d$E$/d$x$ resolution of the prototype, evaluated in a test beam campaign at the CERN PS, complies with both the performance of the currently operated MWPC-based readout chambers and the challenging requirements of the ALICE TPC upgrade program. Detailed simulations of the readout system are able to reproduce the data.
• ### Was the cosmic ray burst detected by the GRAPES-3 on 22 June 2015 caused by transient weakening of geomagnetic field or by an interplanetary anisotropy?(1803.10499)

March 28, 2018 astro-ph.HE
The GRAPES-3 muon telescope in Ooty, India had claimed detection of a 2 hour (h) high-energy ($\sim$20 GeV) burst of galactic cosmic-rays (GCRs) through a $>$50$\sigma$ surge in GeV muons, was caused by reconnection of the interplanetary magnetic field (IMF) in the magnetosphere that led to transient weakening of Earth's magnetic shield. This burst had occurred during a G4-class geomagnetic storm (storm) with a delay of $\frac{1}{2}$h relative to the coronal mass ejection (CME) of 22 June 2015 (Mohanty et al., 2016). However, recently a group interpreted the occurrence of the same burst in a subset of 31 neutron monitors (NMs) to have been the result of an anisotropy in interplanetary space (Evenson et al., 2017) in contrast to the claim in (Mohanty et al., 2016). A new analysis of the GRAPES-3 data with a fine 10.6$^{\circ}$ angular segmentation shows the speculation of interplanetary anisotropy to be incorrect, and offers a possible explanation of the NM observations. The observed 28 minutes (min) delay of the burst relative to the CME can be explained by the movement of the reconnection front from the bow shock to the surface of Earth at an average speed of 35 km/s, much lower than the CME speed of 700 km/s. This measurement may provide a more accurate estimate of the start of the storm.
• ### Studies of the effect of rate on gain for straw tube detector(1709.08030)

Sept. 23, 2017 hep-ex, physics.ins-det
Basic R & D have been carried out with one small straw tube detector prototype with premixed gas of Ar+CO2 in 70:30 and 90:10 ratio. The gain and the energy resolution are measured with Fe55 X-ray source. Effect of temperature and pressure on these parameters are measured. The variation of gain and energy resolution with rate per unit length are also measured. The details of the test set-up, the method of measurement and the test results are presented in this paper.
• Substantial experimental and theoretical efforts worldwide are devoted to explore the phase diagram of strongly interacting matter. At LHC and top RHIC energies, QCD matter is studied at very high temperatures and nearly vanishing net-baryon densities. There is evidence that a Quark-Gluon-Plasma (QGP) was created at experiments at RHIC and LHC. The transition from the QGP back to the hadron gas is found to be a smooth cross over. For larger net-baryon densities and lower temperatures, it is expected that the QCD phase diagram exhibits a rich structure, such as a first-order phase transition between hadronic and partonic matter which terminates in a critical point, or exotic phases like quarkyonic matter. The discovery of these landmarks would be a breakthrough in our understanding of the strong interaction and is therefore in the focus of various high-energy heavy-ion research programs. The Compressed Baryonic Matter (CBM) experiment at FAIR will play a unique role in the exploration of the QCD phase diagram in the region of high net-baryon densities, because it is designed to run at unprecedented interaction rates. High-rate operation is the key prerequisite for high-precision measurements of multi-differential observables and of rare diagnostic probes which are sensitive to the dense phase of the nuclear fireball. The goal of the CBM experiment at SIS100 (sqrt(s_NN) = 2.7 - 4.9 GeV) is to discover fundamental properties of QCD matter: the phase structure at large baryon-chemical potentials (mu_B > 500 MeV), effects of chiral symmetry, and the equation-of-state at high density as it is expected to occur in the core of neutron stars. In this article, we review the motivation for and the physics programme of CBM, including activities before the start of data taking in 2022, in the context of the worldwide efforts to explore high-density QCD matter.
• ### Long-term stability test of a triple GEM detector(1608.00562)

July 30, 2016 hep-ex, physics.ins-det
The main aim of the study is to perform the long-term stability test of gain of the single mask triple GEM detector. A simple method is used for this long- term stability test using a radioactive X-ray source with high activity. The test is continued till accumulation of charge per unit area > 12.0 mC/mm2. The details of the chamber fabrication, the test set-up, the method of measurement and the test results are presented in this paper.
• ### Performance of a large size triple GEM detector at high particle rate for CBM Experiment at FAIR(1604.02899)

June 2, 2016 physics.ins-det
In CBM Experiment at FAIR, dimuons will be detected by a Muon Chamber (MUCH) consisting of segmented absorbers of varying widths and tracking chambers sandwiched between the absorber-pairs. In this fixed target heavy-ion collision experiment, operating at highest interaction rate of $10~MHz$ for $Au+Au$ collision, after the first MUCH detector station in its inner radial ring will face a particle rate of $1~MHz/cm^2$. To operate at such a high particle density, GEM technology based detectors have been selected for the first two stations of MUCH. We have reported earlier the performance of several small-size GEM detector prototypes built at VECC for use in MUCH. In this work, we report on a large GEM chamber prototype tested with proton beam of momentum $2.36~GeV/c$ at COSY-J\"{u}elich Germany. The detector was read out using nXYTER ASIC operated in self-triggering mode. An efficiency higher than $96\%$ at $\Delta V_{GEM}~=~375.2~V$ was achieved. The variation of efficiency with the rate of incoming protons has been found to vary within $2\%$ when tested up to a maximum rate of $2.8~MHz/cm^2$. The gain was found to be stable at high particle rate with a maximum variation of $\sim~9\%$.
• ### Undersaturation of quarks at early stages of relativistic nuclear collisions: the hot glue initial scenario and its observable signatures(1509.07682)

Nov. 17, 2015 hep-ph, hep-ex, nucl-ex, nucl-th, hep-lat
The early stage of high multiplicity nuclear collisions is represented by a nearly quarkless, hot, deconfined pure gluon plasma. This new scenario should be characterized by a suppression of high $p_T$ photons and dileptons as well as by reduced baryon to meson ratios. We present the numerical results for central Pb+Pb collisions at the LHC energies by using the ideal Bjorken hydrodynamics with time-dependent quark fugacity. It is shown that about 25\% of final total entropy is generated during the hydrodynamic evolution of chemically undersaturated quark-gluon plasma.
• ### Multi-pronged events from Coulomb fission of nuclei at very low energies(0812.0054)

Nov. 29, 2008 nucl-ex
Multi-pronged tracks have been recorded in the polyethylene terephthalate (C$_{10}$H$_8$O$_4$)$_n$ solid state nuclear track detector by exposure to a $^{252}$Cf fission source. After chemical etching, two-prong to six-pronged tracks along with single tracks have been observed under the optical microscope. We carried out a systematic study to understand the origin of the prongs. The track detectors were coated with metals (Cu, Ag and Pb) and were exposed to $^{252}$Cf source. After chemical etching two-prong to four pronged tracks were observed in each plate. We believe that at this very low energy of the order of 1 MeV/A, Coulomb fission is the only plausible explanation for the origin of such multi-pronged tracks.