-
A new pixel detector for the CMS experiment was built in order to cope with
the instantaneous luminosities anticipated for the Phase~I Upgrade of the LHC.
The new CMS pixel detector provides four-hit tracking with a reduced material
budget as well as new cooling and powering schemes. A new front-end readout
chip mitigates buffering and bandwidth limitations, and allows operation at low
comparator thresholds. In this paper, comprehensive test beam studies are
presented, which have been conducted to verify the design and to quantify the
performance of the new detector assemblies in terms of tracking efficiency and
spatial resolution. Under optimal conditions, the tracking efficiency is
$99.95\pm0.05\,\%$, while the intrinsic spatial resolutions are
$4.80\pm0.25\,\mu \mathrm{m}$ and $7.99\pm0.21\,\mu \mathrm{m}$ along the
$100\,\mu \mathrm{m}$ and $150\,\mu \mathrm{m}$ pixel pitch, respectively. The
findings are compared to a detailed Monte Carlo simulation of the pixel
detector and good agreement is found.
-
Substantial experimental and theoretical efforts worldwide are devoted to
explore the phase diagram of strongly interacting matter. At LHC and top RHIC
energies, QCD matter is studied at very high temperatures and nearly vanishing
net-baryon densities. There is evidence that a Quark-Gluon-Plasma (QGP) was
created at experiments at RHIC and LHC. The transition from the QGP back to the
hadron gas is found to be a smooth cross over. For larger net-baryon densities
and lower temperatures, it is expected that the QCD phase diagram exhibits a
rich structure, such as a first-order phase transition between hadronic and
partonic matter which terminates in a critical point, or exotic phases like
quarkyonic matter. The discovery of these landmarks would be a breakthrough in
our understanding of the strong interaction and is therefore in the focus of
various high-energy heavy-ion research programs. The Compressed Baryonic Matter
(CBM) experiment at FAIR will play a unique role in the exploration of the QCD
phase diagram in the region of high net-baryon densities, because it is
designed to run at unprecedented interaction rates. High-rate operation is the
key prerequisite for high-precision measurements of multi-differential
observables and of rare diagnostic probes which are sensitive to the dense
phase of the nuclear fireball. The goal of the CBM experiment at SIS100
(sqrt(s_NN) = 2.7 - 4.9 GeV) is to discover fundamental properties of QCD
matter: the phase structure at large baryon-chemical potentials (mu_B > 500
MeV), effects of chiral symmetry, and the equation-of-state at high density as
it is expected to occur in the core of neutron stars. In this article, we
review the motivation for and the physics programme of CBM, including
activities before the start of data taking in 2022, in the context of the
worldwide efforts to explore high-density QCD matter.
-
We present experimental results on inclusive spectra and mean multiplicities
of negatively charged pions produced in inelastic p+p interactions at incident
projectile momenta of 20, 31, 40, 80 and 158 GeV/c ($\sqrt{s} = $ 6.3, 7.7,
8.8, 12.3 and 17.3 GeV, respectively). The measurements were performed using
the large acceptance NA61/SHINE hadron spectrometer at the CERN Super Proton
Synchrotron.
Two-dimensional spectra are determined in terms of rapidity and transverse
momentum. Their properties such as the width of rapidity distributions and the
inverse slope parameter of transverse mass spectra are extracted and their
collision energy dependences are presented. The results on inelastic p+p
interactions are compared with the corresponding data on central Pb+Pb
collisions measured by the NA49 experiment at the CERN SPS.
The results presented in this paper are part of the NA61/SHINE ion program
devoted to the study of the properties of the onset of deconfinement and search
for the critical point of strongly interacting matter. They are required for
interpretation of results on nucleus-nucleus and proton-nucleus collisions.
-
Spectra of K0S mesons and Lambda hyperons were measured in p+C interactions
at 31 GeV/c with the large acceptance NA61/SHINE spectrometer at the CERN SPS.
The data were collected with an isotropic graphite target with a thickness of
4% of a nuclear interaction length. Interaction cross sections, charged pion
spectra, and charged kaon spectra were previously measured using the same data
set. Results on K0S and Lambda production in p+C interactions serve as
reference for the understanding of the enhancement of strangeness production in
nucleus-nucleus collisions. Moreover, they provide important input for the
improvement of neutrino flux predictions for the T2K long baseline neutrino
oscillation experiment in Japan. Inclusive production cross sections for K0S
and Lambda are presented as a function of laboratory momentum in intervals of
the laboratory polar angle covering the range from 0 up to 240 mrad. The
results are compared with predictions of several hadron production models. The
K0S mean multiplicity in production processes <n_K0S> and the inclusive cross
section for K0S production were measured and amount to 0.127 +- 0.005 (stat) +-
0.022 (sys) and 29.0 +- 1.6 (stat) +- 5.0 (sys) mb, respectively.
-
The T2K long-baseline neutrino oscillation experiment in Japan needs precise
predictions of the initial neutrino flux. The highest precision can be reached
based on detailed measurements of hadron emission from the same target as used
by T2K exposed to a proton beam of the same kinetic energy of 30 GeV. The
corresponding data were recorded in 2007-2010 by the NA61/SHINE experiment at
the CERN SPS using a replica of the T2K graphite target. In this paper details
of the experiment, data taking, data analysis method and results from the 2007
pilot run are presented. Furthermore, the application of the NA61/SHINE
measurements to the predictions of the T2K initial neutrino flux is described
and discussed.
-
The modular hadron calorimeter with micro-pixel avalanche photodiodes readout
for the NA61/SHINE experiment at the CERN SPS is presented. The calorimeter
consists of 44 independent modules with lead-scintillator sandwich structure.
The light from the scintillator tiles is captured by and transported with
WLS-fibers embedded in scintillator grooves. The construction provides a
longitudinal segmentation of the module in 10 sections with independent MAPD
readout. MAPDs with pixel density of $~10^{4}$/mm$^2$ ensure good linearity of
calorimeter response in a wide dynamical range. The performance of the
calorimeter prototype in a beam test is reported.