• ### First Data Release of the COSMOS Lyman-Alpha Mapping And Tomography Observations: 3D Lyman-$\alpha$ Forest Tomography at 2.05 < z < 2.55(1710.02894)

Aug. 3, 2018 astro-ph.CO, astro-ph.GA
Faint star-forming galaxies at $z\sim 2-3$ can be used as alternative background sources to probe the Lyman-$\alpha$ forest in addition to quasars, yielding high sightline densities that enable 3D tomographic reconstruction of the foreground absorption field. Here, we present the first data release from the COSMOS Lyman-Alpha Mapping And Mapping Observations (CLAMATO) Survey, which was conducted with the LRIS spectrograph on the Keck-I telescope. Over an observational footprint of 0.157$\mathrm{deg}^2$ within the COSMOS field, we used 240 galaxies and quasars at $2.17<z<3.00$, with a mean comoving transverse separation of $2.37\,h^{-1}\,\mathrm{Mpc^3}$, as background sources probing the foreground Lyman-$\alpha$ forest absorption at $2.05<z<2.55$. The Lyman-$\alpha$ forest data was then used to create a Wiener-filtered tomographic reconstruction over a comoving volume of $3.15\,\times 10^5\,h^{-3}\,\mathrm{Mpc^3}$ with an effective smoothing scale of $2.5\,h^{-1}\,\mathrm{Mpc}$. In addition to traditional figures, this map is also presented as a virtual-reality YouTube360 video visualization and manipulable interactive figure. We see large overdensities and underdensities that visually agree with the distribution of coeval galaxies from spectroscopic redshift surveys in the same field, including overdensities associated with several recently-discovered galaxy protoclusters in the volume. This data release includes the redshift catalog, reduced spectra, extracted Lyman-$\alpha$ forest pixel data, and tomographic map of the absorption.
• ### Asteroid Ryugu Before the Hayabusa2 Encounter(1804.03734)

April 10, 2018 astro-ph.EP
Asteroid (162173) Ryugu is the target object of Hayabusa2, an asteroid exploration and sample return mission led by Japan Aerospace Exploration Agency (JAXA). Ground-based observations indicate that Ryugu is a C-type near-Earth asteroid with a diameter of less than 1 km, but the knowledge of its detailed properties is still very limited. This paper summarizes our best understanding of the physical and dynamical properties of Ryugu based on remote sensing and theoretical modeling. This information is used to construct a design reference model of the asteroid that is used for formulation of mission operations plans in advance of asteroid arrival. Particular attention is given to the surface properties of Ryugu that are relevant to sample acquisition. This reference model helps readers to appropriately interpret the data that will be directly obtained by Hayabusa2 and promotes scientific studies not only for Ryugu itself and other small bodies but also for the Solar System evolution that small bodies shed light on.
• ### Exploring the Dust Content of Galactic Winds With Herschel. II. Nearby Dwarf Galaxies(1803.03269)

April 4, 2018 astro-ph.GA
We present the results from an analysis of deep Herschel Space Observatory observations of six nearby dwarf galaxies known to host galactic-scale winds. The superior far-infrared sensitivity and angular resolution of Herschel have allowed detection of cold circumgalactic dust features beyond the stellar components of the host galaxies traced by Spitzer 4.5 $\mu$m images. Comparisons of these cold dust features with ancillary data reveal an imperfect spatial correlation with the ionized gas and warm dust wind components. We find that typically $\sim$10-20\% of the total dust mass in these galaxies resides outside of their stellar disks, but this fraction reaches $\sim$60\% in the case of NGC 1569. This galaxy also has the largest metallicity (O/H) deficit in our sample for its stellar mass. Overall, the small number of objects in our sample precludes drawing strong conclusions on the origin of the circumgalactic dust. We detect no statistically significant trends with star formation properties of the host galaxies, as might be expected if the dust were lifted above the disk by energy inputs from on-going star formation activity. Although a case for dust entrained in a galactic wind is seen in NGC 1569, in all cases, we cannot rule out the possibility that some of the circumgalactic dust might be associated instead with gas accreted or removed from the disk by recent galaxy interaction events, or that it is part of the outer gas-rich portion of the disk that lies below the sensitivity limit of the Spitzer 4.5 $\mu$m data.
• ### Herschel-PACS photometry of faint stars(1712.08422)

Dec. 22, 2017 astro-ph.SR, astro-ph.IM
Our aims are to determine flux densities and their photometric accuracy for a set of seventeen stars that range in flux from intermediately bright (<2.5 Jy) to faint (>5 mJy) in the far-infrared (FIR). We also aim to derive signal-to-noise dependence with flux and time, and compare the results with predictions from the Herschel exposure-time calculation tool. The PACS faint star sample has allowed a comprehensive sensitivity assessment of the PACS photometer. Accurate photometry allows us to establish a set of five FIR primary standard candidates, namely alpha Ari, epsilon Lep, omega,Cap, HD41047 and 42Dra, which are 2 -- 20 times fainter than the faintest PACS fiducial standard (gamma Dra) with absolute accuracy of <6%. For three of these primary standard candidates, essential stellar parameters are known, meaning that a dedicated flux model code may be run.
• ### Deep Scattering: Rendering Atmospheric Clouds with Radiance-Predicting Neural Networks(1709.05418)

Sept. 15, 2017 cs.LG, stat.ML, cs.GR
We present a technique for efficiently synthesizing images of atmospheric clouds using a combination of Monte Carlo integration and neural networks. The intricacies of Lorenz-Mie scattering and the high albedo of cloud-forming aerosols make rendering of clouds---e.g. the characteristic silverlining and the "whiteness" of the inner body---challenging for methods based solely on Monte Carlo integration or diffusion theory. We approach the problem differently. Instead of simulating all light transport during rendering, we pre-learn the spatial and directional distribution of radiant flux from tens of cloud exemplars. To render a new scene, we sample visible points of the cloud and, for each, extract a hierarchical 3D descriptor of the cloud geometry with respect to the shading location and the light source. The descriptor is input to a deep neural network that predicts the radiance function for each shading configuration. We make the key observation that progressively feeding the hierarchical descriptor into the network enhances the network's ability to learn faster and predict with high accuracy while using few coefficients. We also employ a block design with residual connections to further improve performance. A GPU implementation of our method synthesizes images of clouds that are nearly indistinguishable from the reference solution within seconds interactively. Our method thus represents a viable solution for applications such as cloud design and, thanks to its temporal stability, also for high-quality production of animated content.
• ### Britannia Rule the Waves(1708.08332)

Aug. 28, 2017 physics.ed-ph
The students are introduced to navigation in general and the longitude problem in particular. A few videos provide insight into scientific and historical facts related to the issue. Then, the students learn in two steps how longitude can be derived from time measurements. They first build a Longitude Clock that visualises the math behind the concept. They use it to determine the longitudes corresponding to five time measurements. In the second step, they assume the position of James Cook's navigator and plot the location of seven destinations on Cook's second voyage between 1772 and 1775.
• ### Discovery of a satellite of the large trans-Neptunian object (225088) 2007OR10(1703.01407)

March 4, 2017 astro-ph.EP
2007OR10 is currently the third largest known dwarf planet in the transneptunian region, with an effective radiometric diameter of ~1535 km. It has a slow rotation period of ~45 h that was suspected to be caused by tidal interactions with a satellite undetected at that time. Here we report on the discovery of a likely moon of 2007OR10, identified on archival Hubble Space Telescope WFC3/UVIS system images. Although the satellite is detected at two epochs, this does not allow an unambiguous determination of the orbit and the orbital period. A feasible 1.5-5.8x10^21 kg estimate for the system mass leads to a likely 35 to 100 d orbital period. The moon is about 4.2m fainter than 2007OR10 in HST images that corresponds to a diameter of 237 km assuming equal albedos with the primary. Due to the relatively small size of the moon the previous size and albedo estimates for the primary remains unchanged. With this discovery all trans-Neptunian objects larger than 1000 km are now known to harbour satellites, an important constraint for moon formation theories in the young Solar system.
• ### Results from a triple chord stellar occultation and far-infrared photometry of the trans-Neptunian object (229762) 2007 UK126(1611.02798)

Nov. 9, 2016 astro-ph.EP
A stellar occultation by a trans-Neptunian object (TNO) provides an opportunity to probe its size and shape. Very few occultations by TNOs have been sampled simultaneously from multiple locations, while a robust estimation of shadow size has been possible for only two objects. We present the first observation of an occultation by the TNO 2007 UK126 on 15 November 2014, measured by three observers, one nearly on and two almost symmetrical to the shadow's centerline. This is the first multi-chord dataset obtained for a so-called detached object, a TNO subgroup with perihelion distances so large that the giant planets have likely not perturbed their orbits. We revisit Herschel/PACS far-infrared data, applying a new reduction method to improve the accuracy of the measured fluxes. Combining both datasets allows us to comprehensively characterize 2007 UK126. We use error-in-variable regression to solve the non-linear problem of propagating timing errors into uncertainties of the ellipse parameters. Based on the shadow's size and a previously reported rotation period, we expect a shape of a Maclaurin spheroid and derive a geometrically plausible size range. To refine our size estimate of 2007 UK126, we model its thermal emission using a thermophysical model code. We conduct a parametric study to predict far-infrared fluxes and compare them to the Herschel/PACS measurements. The favorable geometry of our occultation chords, combined with minimal dead-time imaging, and precise GPS time measurements, allow for an accurate estimation of the shadow size (best-fitting ellipse with axes 645.80 $\pm$ 5.68 km $\times$ 597.81 $\pm$ 12.74 km) and the visual geometric albedo (15.0 $\pm$ 1.6 %). By combining our analyses of the occultation and the far-infrared data, we can constrain the effective diameter of 2007 UK126 to 599 - 629 km. We conclude that subsolar surface temperatures are $\approx$ 50 - 55 K.
• ### Perturbational treatment of spin-orbit coupling for generally applicable high-level multi-reference methods(1611.02884)

Nov. 9, 2016 physics.chem-ph
An efficient perturbational treatment of spin-orbit coupling within the framework of high-level multi-reference techniques has been implemented in the most recent version of the COLUMBUS quantum chemistry package, extending the existing fully variational two-component (2c) multi-reference configuration interaction singles and doubles (MRCISD) method. The proposed scheme follows related implementations of quasi-degenerate perturbation theory (QDPT) model space techniques. Our model space is built either from uncontracted, large-scale scalar relativistic MRCISD wavefunctions or based on the scalar-relativistic solutions of the linear-response-theory-based multi-configurational averaged quadratic coupled cluster method (LRT-MRAQCC). The latter approach allows for a consistent, approximatively size-consistent and size-extensive treatment of spin-orbit coupling. The approach is described in detail and compared to a number of related techniques. The inherent accuracy of the QDPT approach is validated by comparing cuts of the potential energy surfaces of acrolein and its S, Se, and Te analoga with the corresponding data obtained from matching fully variational spin-orbit MRCISD calculations. The conceptual availability of approximate analytic gradients with respect to geometrical displacements is an attractive feature of the 2c-QDPT-MRCISD and 2c-QDPT-LRT-MRAQCC methods for structure optimization and ab inito molecular dynamics simulations.
• ### Influence of the liquid film thickness on the coefficient of restitution for wet particles(1601.07032)

March 29, 2016 cond-mat.soft
The normal coefficient of restitution (COR) for a spherical particle bouncing on a wet plane is investigated experimentally and compared with a model characterizing the energy loss at impact. For fixed ratios of liquid film thickness $\delta$ to particle diameter $D$, the wet COR is always found to decay linearly with St$^{-1}$, where St, the Stokes number, measures the particle inertia with respect to the viscous force of the liquid. Such a dependency suggests a convenient way of predicting the wet COR with two fit parameters: A critical COR at infinitely large St and a critical St at zero COR. We characterize the dependency of the two parameters on $\delta/D$ and compare it with a model considering the energy loss from the inertia and the viscosity of the wetting liquid. This investigation suggests an analytical prediction of the COR for wet particles.
• ### ARTUS - A Framework for Event-based Data Analysis in High Energy Physics(1511.00852)

Nov. 3, 2015 hep-ex, cs.SE
ARTUS is an event-based data-processing framework for high energy physics experiments. It is designed for large-scale data analysis in a collaborative environment. The architecture design choices take into account typical challenges and are based on experiences with similar applications. The structure of the framework and its advantages are described. An example use case and performance measurements are presented. The framework is well-tested and successfully used by several analysis groups.
• ### Particle-based simulations of steady-state mass transport at high P\'eclet numbers(1510.05126)

Conventional approaches for simulating steady-state distributions of particles under diffusive and advective transport at high P\'eclet numbers involve solving the diffusion and advection equations in at least two dimensions. Here, we present an alternative computational strategy by combining a particle-based rather than a field-based approach with the initialisation of particles in proportion to their flux. This method allows accurate prediction of the steady state and is applicable even at high P\'eclet numbers where traditional particle-based Monte-Carlo methods starting from randomly initialised particle distributions fail. We demonstrate that generating a flux of particles according to a predetermined density and velocity distribution at a single fixed time and initial location allows for accurate simulation of mass transport under flow. Specifically, upon initialisation in proportion to their flux, these particles are propagated individually and detected by summing up their Monte-Carlo trajectories in predefined detection regions. We demonstrate quantitative agreement of the predicted concentration profiles with the results of experiments performed with fluorescent particles in microfluidic channels under continuous flow. This approach is computationally advantageous and readily allows non-trivial initial distributions to be considered. In particular, this method is highly suitable for simulating advective and diffusive transport in microfluidic devices.
• ### Ordering in granular rod monolayers driven far from thermodynamic equilibrium(1503.03737)

May 22, 2015 cond-mat.soft
The orientational order in vertically agitated granular rod monolayers is investigated experimentally and compared quantitatively with equilibrium Monte Carlo simulations and density functional theory. At sufficiently high number density, short rods form a tetratic state and long rods form a uniaxial nematic state. The length-to-width ratio at which the order changes from tetratic to uniaxial is around $7.3$ in both experiments and simulations. This agreement illustrates the universal aspects of the ordering of rod-shaped particles across equilibrium and nonequilibrium systems. Moreover, the assembly of granular rods into ordered states is found to be independent of the agitation frequency and strength, suggesting that the detailed nature of energy injection into such a nonequilibrium system does not play a crucial role.
• ### Visual exploration of 2D autonomous dynamical systems(1503.07137)

March 23, 2015 physics.comp-ph, physics.ed-ph
In an introductory course on dynamical systems or Hamiltonian mechanics, vector field diagrams are a central tool to show a system's qualitative behaviour in a certain domain. Because of their low sampling rates and the involved issues of vector normalization, these plots give only a coarse insight and are unable to convey the vector field behaviour at locations with high variation, in particular in the neighborhood of critical points. Similarly, automatic generation of phase portraits based on traditional sampling cannot precisely capture separatrices or limit cylces. In this paper, we present ASysViewer, an application for the interactive visual exploration of two-dimensional autonomous dynamical systems using line integral convolution techniques for visualization, and grid-based techniques to extract critical points and separatrices. ASysViewer is addressed to undergraduate students during their first course in dynamical systems or Hamiltonian mechanics.
• ### A High Power-Density Mediator-Free Microfluidic Biophotovoltaic Device for Cyanobacterial Cells(1411.5948)

Nov. 21, 2014 physics.bio-ph, q-bio.OT
Biophotovoltaics has emerged as a promising technology for generating renewable energy since it relies on living organisms as inexpensive, self-repairing and readily available catalysts to produce electricity from an abundant resource - sunlight. The efficiency of biophotovoltaic cells, however, has remained significantly lower than that achievable through synthetic materials. Here, we devise a platform to harness the large power densities afforded by miniaturised geometries. To this effect, we have developed a soft-lithography approach for the fabrication of microfluidic biophotovoltaic devices that do not require membranes or mediators. Synechocystis sp. PCC 6803 cells were injected and allowed to settle on the anode, permitting the physical proximity between cells and electrode required for mediator-free operation. We demonstrate power densities of above 100 mW/m2 for a chlorophyll concentration of 100 {\mu}M under white light, a high value for biophotovoltaic devices without extrinsic supply of additional energy.
• ### Visual appearance of wireframe objects in special relativity(1410.4583)

The visual appearance of a moving object in special relativity can be constructed in a straightforward manner when representing the surface of the object, or at least a wire frame model of it, as a point cloud. The apparent position of each individual point is then found by intersecting its worldline with the observer's backward light cone. In this paper, we present a complete derivation of the apparent position of a point and some more complex geometric objects for general parameter settings (configurations). We implemented our results in python and asymptote and used these tools to generate scripts that create the figures in this paper. These scripts are directly applicable in an undergraduate course to special relativity and can also serve as the basis for student projects with the aim to study more complex sceneries.
• ### Operations and Performance of the PACS Instrument 3He Sorption Cooler on board of the Herschel Space Observatory(1405.5727)

May 22, 2014 astro-ph.IM
A 3He sorption cooler produced the operational temperature of 285mK for the bolometer arrays of the Photodetector Array Camera and Spectrometer (PACS) instrument of the Herschel Space Observatory. This cooler provided a stable hold time between 60 and 73h, depending on the operational conditions of the instrument. The respective hold time could be determined by a simple functional relation established early on in the mission and reliably applied by the scientific mission planning for the entire mission. After exhaustion of the liquid 3He due to the heat input by the detector arrays, the cooler was recycled for the next operational period following a well established automatic procedure. We give an overview of the cooler operations and performance over the entire mission and distinguishing in-between the start conditions for the cooler recycling and the two main modes of PACS photometer operations. As a spin-off, the cooler recycling temperature effects on the Herschel cryostat 4He bath were utilized as an alternative method to dedicated Direct Liquid Helium Content Measurements in determining the lifetime of the liquid Helium coolant.
• ### The Pointing System of the Herschel Space Observatory. Description, Calibration, Performance and Improvements(1405.3186)

May 13, 2014 astro-ph.IM
We present the activities carried out to calibrate and characterise the performance of the elements of attitude control and measurement on board the Herschel spacecraft. The main calibration parameters and the evolution of the indicators of the pointing performance are described, from the initial values derived from the observations carried out in the performance verification phase to those attained in the last year and half of mission, an absolute pointing error around or even below 1 arcsec, a spatial relative pointing error of some 1 arcsec and a pointing stability below 0.2 arsec. The actions carried out at the ground segment to improve the spacecraft pointing measurements are outlined. On-going and future developments towards a final refinement of the Herschel astrometry are also summarised. A brief description of the different components of the attitude control and measurement system (both in the space and in the ground segments) is also given for reference. We stress the importance of the cooperation between the different actors (scientists, flight dynamics and systems engineers, attitude control and measurement hardware designers, star-tracker manufacturers, etc.) to attain the final level of performance.
• ### Traces for functions of bounded variation on manifolds with applications to conservation laws on manifolds with boundary(1403.5192)

March 20, 2014 math.AP
In this paper we show existence of a trace for functions of bounded variation on Riemannian manifolds with boundary. The trace, which is bounded in $L^\infty$, is reached via $L^1$-convergence and allows an integration by parts formula. We apply these results in order to show well-posedness and total variation estimates for the initial boundary value problem for a scalar conservation law on compact Riemannian manifolds with boundary in the context of functions of bounded variation via the vanishing viscosity method. The flux function is assumed to be time-dependent and divergence-free.
• ### MPPhys - A many-particle simulation package for computational physics education(1403.1695)

In a first course to classical mechanics elementary physical processes like elastic two-body collisions, the mass-spring model, or the gravitational two-body problem are discussed in detail. The continuation to many-body systems, however, is defered to graduate courses although the underlying equations of motion are essentially the same and although there is a strong motivation for high- school students in particular because of the use of particle systems in computer games. The missing link between the simple and the more complex problem is a basic introduction to solve the equations of motion numerically which could be illustrated, however, by means of the Euler method. The many-particle physics simulation package MPPhys offers a platform to experiment with simple particle simulations. The aim is to give a principle idea how to implement many-particle simulations and how simulation and visualization can be combined for interactive visual explorations.
• ### Geometric Error of Finite Volume Schemes for Conservation Laws on Evolving Surfaces(1301.1287)

March 3, 2014 math.NA
This paper studies finite volume schemes for scalar hyperbolic conservation laws on evolving hypersurfaces of $\mathbb{R}^3$. We compare theoretical schemes assuming knowledge of all geometric quantities to (practical) schemes defined on moving polyhedra approximating the surface. For the former schemes error estimates have already been proven, but the implementation of such schemes is not feasible for complex geometries. The latter schemes, in contrast, only require (easily) computable geometric quantities and are thus more useful for actual computations. We prove that the difference between approximate solutions defined by the respective families of schemes is of the order of the mesh width. In particular, the practical scheme converges to the entropy solution with the same rate as the theoretical one. Numerical experiments show that the proven order of convergence is optimal.
• ### Nanoscale spatially resolved infrared spectra from single microdroplets(1401.8204)

Jan. 31, 2014 cond-mat.soft, physics.bio-ph
Droplet microfluidics has emerged as a powerful platform allowing a large number of individual reactions to be carried out in spatially distinct microcompartments. Due to their small size, however, the spectroscopic characterisation of species encapsulated in such systems remains challenging. In this paper, we demonstrate the acquisition of infrared spectra from single microdroplets containing aggregation-prone proteins. To this effect, droplets are generated in a microfluidic flow-focussing device and subsequently deposited in a square array onto a ZnSe prism using a micro stamp. After drying, the solutes present in the droplets are illuminated locally by an infrared laser through the prism, and their thermal expansion upon absorption of infrared radiation is measured with an atomic force microscopy tip, granting nanoscale resolution. Using this approach, we resolve structural differences in the amide bands of the spectra of monomeric and aggregated lysozyme from single microdroplets with picolitre volume.
• ### The Herschel-PACS photometer calibration: Point-source flux calibration for scan maps(1309.6099)

Sept. 24, 2013 astro-ph.IM
This paper provides an overview of the PACS photometer flux calibration concept, in particular for the principal observation mode, the scan map. The absolute flux calibration is tied to the photospheric models of five fiducial stellar standards (alpha Boo, alpha Cet, alpha Tau, beta And, gamma Dra). The data processing steps to arrive at a consistent and homogeneous calibration are outlined. In the current state the relative photometric accuracy is around 2% in all bands. Starting from the present calibration status, the characterization and correction for instrumental effects affecting the relative calibration accuracy is described and an outlook for the final achievable calibration numbers is given. After including all the correction for the instrumental effects, the relative photometric calibration accuracy (repeatability) will be as good as 0.5% in the blue and green band and 2% in the red band. This excellent calibration starts to reveal possible inconsistencies between the models of the K-type and the M-type stellar calibrators. The absolute calibration accuracy is therefore mainly limited by the 5% uncertainty of the celestial standard models in all three bands. The PACS bolometer response was extremely stable over the entire Herschel mission and a single, time-independent response calibration file is sufficient for the processing and calibration of the science observations. The dedicated measurements of the internal calibration sources were needed only to characterize secondary effects. No aging effects of the bolometer or the filters have been found. Also, we found no signs of filter leaks. The PACS photometric system is very well characterized with a constant energy spectrum nu*Fnu = lambda*Flambda = const as a reference. Colour corrections for a wide range of sources SEDs are determined and tabulated.
• ### The Herschel PACS photometer calibration - A time dependent flux calibration for the PACS chopped point-source photometry AOT mode(1308.4068)

Aug. 28, 2013 astro-ph.IM
We present a flux calibration scheme for the PACS chopped point-source photometry observing mode based on the photometry of five stellar standard sources. This mode was used for science observations only early in the mission. Later, it was only used for pointing and flux calibration measurements. Its calibration turns this type of observation into fully validated data products in the Herschel Science Archive. Systematic differences in calibration with regard to the principal photometer observation mode, the scan map, are derived and amount to 5-6%. An empirical method to calibrate out an apparent response drift during the first 300 Operational Days is presented. The relative photometric calibration accuracy (repeatability) is as good as 1% in the blue and green band and up to 5% in the red band. Like for the scan map mode, inconsistencies among the stellar calibration models become visible and amount to 2% for the five standard stars used. The absolute calibration accuracy is therefore mainly limited by the model uncertainty, which is 5% for all three bands.