• ### Optimization of light yield by injection of the optical filler into the co extruded hole of plastic scintillation bar with WLS fiber in it(1604.02260)

April 8, 2016 hep-ex, physics.ins-det
Results of the measurements with cosmic muons for the light yield of 2-meter long extruded scintillation bar (strip) as a function of distance for different options for light collection technique are presented. Scintillation strip cross section geometry was a triangle made on polystyrene plastic scintillator with dopants of 2% PTP and 0.03% POPOP, extruded with 2.6 mm diameter hole and produced at ISMA (Kharkov, Ukraine). It was shown that the insertion of the optical transparent resin (BC 600 or CKTN MED(E)) by special technique into the co-extruded hole with 1.0 mm or 1.2 mm wave-length shifter (WLS) fiber Kuraray Y11 (200) MC in it significantly improves light collection by factor of 1.6...1.9 against of the 'dry' case.
• ### NA61/SHINE facility at the CERN SPS: beams and detector system(1401.4699)

Jan. 19, 2014 nucl-ex, physics.ins-det
NA61/SHINE (SPS Heavy Ion and Neutrino Experiment) is a multi-purpose experimental facility to study hadron production in hadron-proton, hadron-nucleus and nucleus-nucleus collisions at the CERN Super Proton Synchrotron. It recorded the first physics data with hadron beams in 2009 and with ion beams (secondary 7Be beams) in 2011. NA61/SHINE has greatly profited from the long development of the CERN proton and ion sources and the accelerator chain as well as the H2 beamline of the CERN North Area. The latter has recently been modified to also serve as a fragment separator as needed to produce the Be beams for NA61/SHINE. Numerous components of the NA61/SHINE set-up were inherited from its predecessors, in particular, the last one, the NA49 experiment. Important new detectors and upgrades of the legacy equipment were introduced by the NA61/SHINE Collaboration. This paper describes the state of the NA61/SHINE facility - the beams and the detector system - before the CERN Long Shutdown I, which started in March 2013.
• ### Production of $^{6}_{\Lambda}$H and $^{7}_{\Lambda}$H with the (K$^{-}_{stop}$,$\pi^+$) reaction(nucl-ex/0607019)

July 17, 2006 nucl-ex
The production of neutron rich $\Lambda$-hypernuclei via the ($K^-_stop$,$\pi^+$) reaction has been studied using data collected with the FINUDA spectrometer at the DA$\Phi$NE $\phi$-factory (LNF). The analysis of the inclusive $\pi^+$ momentum spectra is presented and an upper limit for the production of $^6_\Lambda$H and $^7_\Lambda$H from $^6$Li and $^7$Li, is assessed for the first time.
• ### A study of the proton spectra following the capture of $K^-$ in $^6$Li and $^{12}$C with FINUDA(nucl-ex/0606021)

June 14, 2006 nucl-ex
Momenta spectra of protons emitted following the capture of $K^-$ in $^6$Li and $^{12}$C have been measured with 1% resolution. The $^{12}$C spectrum is smooth whereas for $^6$Li a well defined peak appears at about 500 MeV/$c$. The first observation of a structure in this region was identified as a strange tribaryon or, possibly, a $\bar K$-nuclear state. The peak is correlated with a $\pi^-$ coming from $\Sigma^-$ decay in flight, selected by setting momenta larger than 275 MeV/$c$. The $\Sigma^-$ could be produced, together with a 500 MeV/$c$ proton, by the capture of a $K^-$ in a deuteron-cluster substructure of the $^6$Li nucleus. The capture rate for such a reaction is $(1.62\pm 0.23_{stat} ^{+0.71}_{-0.44}(sys))%/K^-_{stop}$, in agreement with the existing observations on $^4$He targets and with the hypothesis that the $^6$Li nucleus can be interpreted as a $(d+\alpha)$ cluster.