• We present numerical tests and predictions of the KrkNLO method for matching of NLO QCD corrections to hard processes with LO parton shower Monte Carlo generators (NLO+PS). This method was described in detail in our previous publications, where it was also compared with other NLO+PS matching approaches (MC@NLO and POWHEG) as well as fixed-order NLO and NNLO calculations. Here we concentrate on presenting some numerical results (cross sections and distributions) for $Z/\gamma^*$ (Drell-Yan) and Higgs-boson production processes at the LHC. The Drell--Yan process is used mainly to validate the KrkNLO implementation in the Herwig 7 program with respect to the previous implementation in Sherpa. We also show predictions for this process with the new, complete, MC-scheme parton distribution functions and compare them with our previously published results. Then, we present the first results of the KrkNLO method for Higgs production in gluon-gluon fusion at the LHC and compare them with MC@NLO and POWHEG predictions from Herwig 7 fixed-order results from HNNLO and a resummed calculation from HqT, as well as with experimental data from the ATLAS collaboration.
  • This document collects the proceedings of the "Parton Radiation and Fragmentation from LHC to FCC-ee" workshop (http://indico.cern.ch/e/ee\_jets16) held at CERN in Nov. 2016. The writeup reviews the latest theoretical and experimental developments on parton radiation and parton-hadron fragmentation studies --including analyses of LEP, B-factories, and LHC data-- with a focus on the future perspectives reacheable in $e^+e^-$ measurements at the Future Circular Collider (FCC-ee), with multi-ab$^{-1}$ integrated luminosities yielding 10$^{12}$ and 10$^{8}$ jets from Z and W bosons decays as well as 10$^5$ gluon jets from Higgs boson decays. The main topics discussed are: (i) parton radiation and parton-to-hadron fragmentation functions (splitting functions at NNLO, small-$z$ NNLL resummations, global FF fits including Monte Carlo (MC) and neural-network analyses of the latest Belle/BaBar high-precision data, parton shower MC generators), (ii) jet properties (quark-gluon discrimination, $e^+e^-$ event shapes and multi-jet rates at NNLO+N$^{n}$LL, jet broadening and angularities, jet substructure at small-radius, jet charge determination, $e^+e^-$ jet reconstruction algorithms), (iii) heavy-quark jets (dead cone effect, charm-bottom separation, gluon-to-$b\bar{b}$ splitting), and (iv) non-perturbative QCD phenomena (colour reconnection, baryon and strangeness production, Bose-Einstein and Fermi-Dirac final-state correlations, colour string dynamics: spin effects, helix hadronization).
  • Next steps in development of the KrkNLO method of implementing NLO QCD corrections to hard processes in parton shower Monte Carlo programs are presented. This new method is a simpler alternative to other well-known approaches, such as MC@NLO and POWHEG. The KrkNLO method owns its simplicity to the use of parton distribution functions (PDFs) in a new, so-called Monte Carlo (MC), factorization scheme which was recently fully defined for the first time. Preliminary numerical results for the Higgs-boson production process are also presented.
  • A next step in development of the KrkNLO method of including complete NLO QCD corrections to hard processes in a LO parton-shower Monte Carlo (PSMC) is presented. It consists of generalisation of the method, previously used for the Drell-Yan process, to Higgs-boson production. This extension is accompanied with the complete description of parton distribution functions (PDFs) in a dedicated, Monte Carlo (MC) factorisation scheme, applicable to any process of production of one or more colour-neutral particles in hadron-hadron collisions.
  • This report was prepared in the context of the LPCC "Electroweak Precision Measurements at the LHC WG" and summarizes the activity of a subgroup dedicated to the systematic comparison of public Monte Carlo codes, which describe the Drell-Yan processes at hadron colliders, in particular at the CERN Large Hadron Collider (LHC). This work represents an important step towards the definition of an accurate simulation framework necessary for very high-precision measurements of electroweak (EW) observables such as the $W$ boson mass and the weak mixing angle. All the codes considered in this report share at least next-to-leading-order (NLO) accuracy in the prediction of the total cross sections in an expansion either in the strong or in the EW coupling constant. The NLO fixed-order predictions have been scrutinized at the technical level, using exactly the same inputs, setup and perturbative accuracy, in order to quantify the level of agreement of different implementations of the same calculation. A dedicated comparison, again at the technical level, of three codes that reach next-to-next-to-leading-order (NNLO) accuracy in quantum chromodynamics (QCD) for the total cross section has also been performed. These fixed-order results are a well-defined reference that allows a classification of the impact of higher-order sets of radiative corrections. Several examples of higher-order effects due to the strong or the EW interaction are discussed in this common framework. Also the combination of QCD and EW corrections is discussed, together with the ambiguities that affect the final result, due to the choice of a specific combination recipe.
  • We show that already at the NLO level the DGLAP evolution kernel Pqq starts to depend on the choice of the evolution variable. We give an explicit example of such a variable, namely the maximum of transverse momenta of emitted partons and we identify a class of evolution variables that leave the NLO Pqq kernel unchanged with respect to the known standard MS-bar results. The kernels are calculated using a modified Curci-Furmanski-Petronzio method which is based on a direct Feynman-graphs calculation.
  • A new method of including the complete NLO QCD corrections to hard processes in the LO parton-shower Monte Carlo (PSMC) is presented. This method, called KrkNLO, requires the use of parton distribution functions in a dedicated Monte Carlo factorization scheme, which is also discussed in this paper. In the future, it may simplify introduction of the NNLO corrections to hard processes and the NLO corrections to PSMC. Details of the method and numerical examples of its practical implementation, as well as comparisons with other calculations, such as MCFM, MC@NLO, POWHEG, for single $Z/\gamma^*$-boson production at the LHC, are presented.
  • The decade-old technique of combining NLO-corrected hard process with LO-level parton shower Monte Carlo is now mature and used in practice of the QCD calculations in the LHC data analysis. The next step, its extension to an NNLO-corrected hard process combined with the NLO-level parton shower Monte Carlo, will require development of the latter component. It does not exist yet in a complete form. In this note we describe recent progress in developing the NLO parton shower for the initial-state hadron beams. The technique of adding NLO corrections in the fully exclusive form (defined in recent years) is now simplified and tested numerically, albeit for a limited set of NLO diagrams in the evolution kernels.
  • We present the Monte Carlo event generator WINHAC for Drell-Yan processes in proton-proton, proton-antiproton, proton-ion and ion-ion collisions. It features multiphoton radiation within the Yennie-Frautschi-Suura exclusive exponentiation scheme with O(alpha) electroweak corrections for the charged-current (W+/W-) processes and multiphoton radiation generated by PHOTOS for neutral-current (Z+gamma) ones. For the initial-state QCD/QED parton shower and hadronisation it is interfaced with PYTHIA. It includes several options, e.g. for the polarized W-boson production, generation of weighted/unweighted events, etc. WINHAC was cross-checked numerically at the per-mille level with independent Monte Carlo programs, such as HORACE and SANC. It has been used as a basic tool for developing and testing some new methods of precise measurements of the Standard Model parameters at the LHC, in particular the W-boson mass. Recently, it has been applied to simulations of double Drell-Yan processes resulting from double-parton scattering, in order to assess their influence on the Higgs-boson detection at the LHC in its ZZ and W+W- decay channels.
  • The concept of new methodology of adding QCD NLO corrections in the initial state Monte Carlo parton shower (hard process part) is tested numerically using, as an example, the process of the heavy boson production at hadron--hadron colliders such as LHC. In spite of the use of a simplified model of the process, all presented numerical results prove convincingly that the basic concept of the new methodology works correctly in practice, that is in the numerical environment of the Monte Carlo parton shower event generator. The differences with the other well established methods, like MC@NLO and POWHEG, are briefly discussed and future refinements of the implementation of the new method are also outlined.
  • Charged lepton transverse momenta in the Drell-Yan processes play an important role at the LHC in precision measurements of the Standard Model parameters, such as the W-boson mass and width, their charge asymmetries and sin^2(theta_W). Therefore, their distributions should be described as accurate as possible by the Monte Carlo event generators. In this paper we discuss the problem of matching the hard-process kinematics of the Monte Carlo generator WINHAC with the parton-shower kinematics of the PYTHIA 6.4 generator while interfacing these two programs. We show that improper assignment of the quark and antiquark effective momenta in the LO matrix element computations may affect considerably the predicted lepton transverse momenta and even completely reverse their charge asymmetries at the LHC. We propose two matching schemes in which the NLO QCD distributions of the leptonic kinematical variables can be well reproduced by the LO WINHAC generator.
  • The project of constructing a complete NLO-level Parton Shower Monte Carlo for the QCD processes developed in IFJ PAN in Krakow is reviewed. Four issues are discussed: (1) the extension of the standard inclusive collinear factorization into a new, fully exclusive scheme; (2) reconstruction of the LO Parton Shower in the new scheme; (3) inclusion of the exclusive NLO corrections into the hard process and (4) inclusion of the exclusive NLO corrections into the evolution (ladder) part.
  • At the LHC, the measurement of the W mass with a precision of \cal{O}(10) MeV/c^2 is both mandatory and difficult. In the analysis strategies proposed so far, shortcuts have been made that are justified for proton-antiproton collisions at the Tevatron, but not for proton-proton collisions at the LHC. The root of the problem lies in the inadequate knowledge of parton density functions of the proton. It is argued that in order to reach a 10 MeV/c^2 precision for the W mass, more precise parton density functions of the proton are needed, and an LHC-specific analysis strategy ought to be pursued. Proposals are made on both issues.
  • This paper is the second of the series of papers proposing dedicated strategies for precision measurements of the Standard Model parameters at the LHC. The common feature of these strategies is their robustness with respect to the systematic measurement and modeling error sources. Their impact on the precision of the measured parameters is reduced using dedicated observables and dedicated measurement procedures which exploit flexibilities of the collider and detector running modes. In the present paper we focus our attention on the measurement of the charge asymmetry of the W-boson mass. This measurement is of primordial importance for the LHC experimental program, both as a direct test of the charge-sign-independent coupling of the W-bosons to the matter particles and as a necessary first step towards the precision measurement of the charge-averaged W-boson mass. We propose and evaluate the LHC-specific strategy to measure the mass difference between the positively and negatively charged W-bosons, MW+ - MW-. We show that its present precision can be improved at the LHC by a factor of 20. We argue that such a precision is beyond the reach of the standard measurement and calibration methods imported to the LHC from the Tevatron program.
  • This work covers methodology of solving QCD evolution equation of the parton distribution using Markovian Monte Carlo (MMC) algorithms in a class of models ranging from DGLAP to CCFM. One of the purposes of the above MMCs is to test the other more sophisticated Monte Carlo programs, the so-called Constrained Monte Carlo (CMC) programs, which will be used as a building block in the parton shower MC. This is why the mapping of the evolution variables (eikonal variable and evolution time) into four-momenta is also defined and tested. The evolution time is identified with the rapidity variable of the emitted parton. The presented MMCs are tested independently, with ~0.1% precision, against the non-MC program APCheb especially devised for this purpose.
  • In this paper we describe a check of the implementation of SANC system generated modules into the framework of the WINHAC Monte Carlo event generator. At this stage of work we limit ourselves to inclusion of complete one-loop electroweak corrections to the charged-current Drell--Yan process. We perform tuned comparisons of the results derived with the aid of two codes: 1) the standard SANC integrator with YFS-inspired treatment of the ISR QED corrections and 2) the WINHAC generator, upgraded with the SANC electroweak modules and downgraded to the O(\alpha) QED corrections. The aim of these comparisons is to prove the correctness of implementation of the SANC electroweak modules into the WINHAC generator. This is achieved through the presented tuned comparisons.
  • With the imminent start of LHC experiments, development of phenomenological tools, and in particular the Monte Carlo programs and algorithms, becomes urgent. A new algorithm for the generation of a parton shower initiated by the single initial hadron beam is presented. The new algorithm is of the class of the so called ``constrained MC'' type algorithm (an alternative to the backward evolution MC algorithm), in which the energy and the type of the parton at the end of the parton shower are constrained (predefined). The complete kinematics configurations with explicitly constructed four momenta are generated and tested. Evolution time is identical with rapidity and minimum transverse momentum is used as an infrared cut-off. All terms of the leading-logarithmic approximation in the DGLAP evolution are properly accounted for. In addition, the essential improvements towards the so-called CCFM/BFKL models are also properly implemented. The resulting parton distributions are cross-checked up to the 0.1% precision level with the help of a multitude of comparisons with other MC and non-MC programs. We regard these tests as an important asset to be exploited at the time when the presented MC will enter as a building block in a larger MC program for W/Z production process at LHC.
  • We discuss precision Monte Carlo (MC) calculations for solving the QCD evolution equations up to the next-to-leading-order (NLO) level. They employ forward Markovian Monte Carlo algorithms, which provide rigorous solutions of the above equations. These algorithms are implemented in the form of the Monte Carlo program EvolFMC. This program has been cross-checked with independent, non-MC, programs (QCDNum16 and APCheb33) and the numerical agreement at the level of 0.1% has been found.
  • A systematic extension of the Monte Carlo (MC) algorithm, that solves the DGLAP equation, into the so-called the one-loop CCFM evolution is presented. Modifications are related to a z-dependent coupling constant; transverse momentum dependence is added to the x-dependence of the parton distributions. The presented Markovian algorithm for one-loop CCFM evolution is the first step in extending it to other more sophisticated schemes beyond DGLAP. In particular, implementing the complete CCFM will be the next step. The presently implemented one-loop CCFM option will be a useful tool in testing the forthcoming MC solutions. Numerical results of the new MC are confronted with other non-MC numerical solutions. The agreement within the MC statistical error of ~0.1% is found. Also, numerical results for kT-dependent structure functions are presented.
  • In this paper we propose a strategy for measuring the inclusive W-boson production processes at LHC. This strategy exploits simultaneously the unique flexibility of the LHC collider in running variable beam particle species at variable beam energies, and the configuration flexibility of the LHC detectors. We propose their concrete settings for a precision measurement of the Standard Model parameters. These dedicated settings optimise the use of the Z boson and Drell-Yan pair production processes as ``the standard reference candles''. The presented strategy allows to factorise and to directly measure those of the QCD effects which affect differently the W and Z production processes. It reduces to a level of 10^{-4} the impact of uncertainties in the partonic distribution functions (PDFs) and in the transverse momentum of the quarks on the measurement precision. Last but not the least, it reduces by a factor of 10 an impact of systematic measurement errors, such as the energy scale and the measurement resolution, on the W-boson production observables.
  • We present precision Monte Carlo calculations solving the QCD evolution equations up to the next-to-leading-order (NLO) level. They employ forward Markovian Monte Carlo (FMC) algorithms, which provide the rigorous solutions of the QCD evolution equations. Appropriate Monte Carlo algorithms are described in detail. They are implemented in the form of the Monte Carlo program EvolFMC, which features the NLO kernels for the QCD evolution. The presented numerical results agree with those from independent, non-MC, programs (QCDNum16, APCheb33) at the level of 0.1%. In this way we have demonstrated the feasibility of the precision MC calculations for the QCD evolution and provided very useful numerical tests (benchmarks) for other, non-Markovian, MC algorithms developed recently.
  • The LHC has been designed as a collider of proton and ion beams. However, in its experimental program, which is focused mainly on studies of high energy transfer collisions of Standard Model point-like particles, protons and ions will play a backstage role. For the majority of the LHC experimentalists, their role will be confined to providing standardized, acceleration-process-stable envelopes for tunable-density and tunable-isospin bunches of Standard Model constituents: quarks and gluons. The inter-bunch environment of collisions of these Standard Model particles specific to hadronic colliders and absent in the leptonic ones, has always been considered as a burden - an annoying but unavoidable price to pay for increasing the collision-energy of point-like particles in the storage rings. In this paper we shall argue that such a burden can be converted into an important merit of the high-energy hadronic colliders - a corner-stone for a fermi-length-scale ``collision-experiment'' employing the bunches of spectator quarks and gluons as tunable ``femtoscopic'' targets for the beams of short-living electroweak bosons.
  • We present the comparisons of two independent Monte Carlo event generators, HORACE and WINHAC, for single-W-boson production in hadronic collisions with multiphoton effects in leptonic W decays. These comparisons were performed first at the parton level with fixed quark-beams energy, and then at the hadron level for proton-proton collisions at the LHC. In general, a good agreement between the two programs has been found. Possible sources of differences in some of the presented results are discussed. We also present and discuss the effects of including non-zero quark masses for the main single-W-boson observables at the LHC.
  • We present the calculation of multiphoton radiation effects in leptonic W-boson decays in the framework of the Yennie-Frautschi-Suura exclusive exponentiation. This calculation is implemented in the Monte Carlo event generator WINHAC for single W-boson production in hadronic collisions at the parton level. Some numerical results obtained with the help of this program are also presented.
  • We present the recent developments in the precision studies of W-pair and single-W processes in e+e- collisions achieved with the help of the KoralW and YFSWW3 Monte Carlo generators. We focus on the theoretical precision of the measurements of M_W and anomalous couplings on the example of lambda coupling. We present the mechanism of running these two independent codes in the form of one Concurrent Monte Carlo code. We describe also the extensions of KoralW necessary to emulate the kinematical region of single-W process.