During the shutdown of the CERN Large Hadron Collider in 2013-2014, an additional pixel layer was installed between the existing Pixel detector of the ATLAS experiment and a new, smaller radius beam pipe. The motivation for this new pixel layer, the Insertable B-Layer (IBL), was to maintain or improve the robustness and performance of the ATLAS tracking system, given the higher instantaneous and integrated luminosities realised following the shutdown. Because of the extreme radiation and collision rate environment, several new radiation-tolerant sensor and electronic technologies were utilised for this layer. This paper reports on the IBL construction and integration prior to its operation in the ATLAS detector.

We have constructed an apparatus to study DC electrical breakdown in liquid helium at temperatures as low as 0.4 K and at pressures between the saturated vapor pressure and $\sim$600 torr. The apparatus can house a set of electrodes that are 12 cm in diameter with a gap of $1-2$ cm between them, and a potential up to $\pm 50$ kV can be applied to each electrode. Initial results demonstrated that it is possible to apply fields exceeding 100 kV/cm in a 1 cm gap between two electropolished stainless steel electrodes 12 cm in diameter for a wide range of pressures at 0.4 K. We also measured the current between two electrodes. Our initial results, $I<1$ pA at 45 kV, correspond to a lower bound on the effective volume resistivity of LHe of $\rho_V > 5\times10^{18}$ $\Omega\cdot$cm. This lower bound is 5 times larger than the bound previously measured. We report the design, construction, and operational experience of the apparatus, as well as initial results.

A new experiment to search for the permanent electric dipole moment of the neutron is being developed for installation at the Spallation Neutron Source at Oak Ridge National Laboratory. This experiment will be performed in liquid helium at ? 0:4 K and requires a large electric field (E ~ 75 kV/cm) to be applied in liquid helium. We have constructed a new HV test apparatus to study electric breakdown in liquid helium. Initial results demonstrated that it is possible to apply fields exceeding 100 kV/cm in a 1 cm gap between two electropolished stainless steel electrodes12 cm in diameter for a wide range of pressures.

This report summarizes the work of the Energy Frontier Higgs Boson working group of the 2013 Community Summer Study (Snowmass). We identify the key elements of a precision Higgs physics program and document the physics potential of future experimental facilities as elucidated during the Snowmass study. We study Higgs couplings to gauge boson and fermion pairs, double Higgs production for the Higgs self-coupling, its quantum numbers and $CP$-mixing in Higgs couplings, the Higgs mass and total width, and prospects for direct searches for additional Higgs bosons in extensions of the Standard Model. Our report includes projections of measurement capabilities from detailed studies of the Compact Linear Collider (CLIC), a Gamma-Gamma Collider, the International Linear Collider (ILC), the Large Hadron Collider High-Luminosity Upgrade (HL-LHC), Very Large Hadron Colliders up to 100 TeV (VLHC), a Muon Collider, and a Triple-Large Electron Positron Collider (TLEP).

We present a method for improving the $b$-jet energy resolution in order to improve the signal sensitivity in searches for particles decaying to a $b$ quark and anti-$b$ quark. A correction function is computed for individual jets, which combines information from the secondary vertex tagger, the offline tracking and standard calorimeter-based jet-energy reconstruction algorithm in order to provide a more accurate measurement of the true $b$-quark energy. We apply the correction to Monte-Carlo-simulated jets in the process $WH \rightarrow \ell \nu b\bar b$ and find an improvement in both the mean and the resolution of the $b$-jet energy with respect to the $b$-quark energy. The correction improves the measured Higgs dijet invariant mass resolution from $\sim$ 15%(standard jet corrections) to $\sim$ 11%(improved jet corrections) in the Higgs mass range from 100 GeV/$c^2$ - 150 GeV/$c^2$. Using the corrected $b$-jet energies instead of the standard calorimeter-based $b$-jet energies results in a $\sim$ 9% improvement in the expected sensitivity for Higgs boson production cross section in the most sensitive search region of the $WH \rightarrow \ell \nu b\bar b$ analysis, which is two tagged jets and one charged central lepton.

Results are presented for a simulation carried out to test the precision with which a detector design (HERON) based on a superfluid helium target material should be able to measure the solar pp and Be7 fluxes. It is found that precisions of +/- 1.68% and +/- 2.97% for pp and Be7 fluxes, respectively, should be achievable in a 5-year data sample. The physics motivation to aim for these precisions is outlined as are the detector design, the methods used in the simulation and sensitivity to solar orbit eccentricity.

The Rayleigh scattering length has been calculated for rare-gas liquids in the ultraviolet for the frequencies at which they luminesce. The calculations are based on the measured dielectric constants in the gas phase, except in the case of xenon for which measurements are available in the liquid. The scattering length mayplace constraints on the design of some large-scale detectors, using uv luminescence, being proposed to observe solar neutrinos and dark matter. Rayleigh scattering in mixtures of rare-gas mixtures is also discussed.

If supersymmetry exists at the electroweak scale, then it should be discovered at the LHC. Determining masses, of supersymmetric particles however, is more difficult. In this paper, methods are discussed to determine combinations of masses and of branching ratios precisely from experimentally observable distributions. In many cases such measurements alone can greatly constrain the particular supersymmetric model and determine its parameters with an accuracy of a few percent. Most of the results shown correspond to one year of running at LHC at ``low luminosity'.