• ### Mode change of a gamma-ray pulsar, PSR J2021+4026(1706.00236)

June 11, 2017 astro-ph.HE
A glitch of a pulsar is known as a sudden increase in the spin frequency and spin-down rate (frequency time derivative), and it can be caused by a sudden rel\ ease of the stress built up in the solid crust of the star or pinned vortices in the superfluid interior. PSR J2021+4026 is the first pulsar that shows a significant change in the gamma-ray flux and pulse profile at the glitch that occurred around 2011 October 16. We report the results of timing and spectral analysis of PSR~J2021+4026 using $\sim$ 8~yr Fermi-LAT data. We find that the pulsar stayed at a high spin-down rate ($\sim 4\%$ higher than the pre-glitch value) and a low gamma-ray state ($\sim 18\%$ lower) for about 3~yr after the glitch. Around 2014 December, the spin-down rate and gamma-ray flux gradually returned to pre-glitch values within a time scale of a few months. The phase-resolved spectra and pulse profiles after the relaxation are also consistent with those before the glitch. The observed long-term evolution of the spin-down rate and the gamma-ray flux indicates that the glitch triggered a mode change in the global magnetosphere. We speculate that the glitch changed the local magnetic field structure around the polar cap and/or the inclination angle of the dipole axis, leading to a change in the electric current circulating in the magnetosphere.
• ### Machine Layout and Performance(1705.09447)

May 26, 2017 physics.acc-ph
Chapter 2 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme temperature and density. To sustain and extend its discovery potential, the LHC will need a major upgrade in the 2020s. This will increase its luminosity (rate of collisions) by a factor of five beyond the original design value and the integrated luminosity (total collisions created) by a factor ten. The LHC is already a highly complex and exquisitely optimised machine so this upgrade must be carefully conceived and will require about ten years to implement. The new configuration, known as High Luminosity LHC (HL-LHC), will rely on a number of key innovations that push accelerator technology beyond its present limits. Among these are cutting-edge 11-12 tesla superconducting magnets, compact superconducting cavities for beam rotation with ultra-precise phase control, new technology and physical processes for beam collimation and 300 metre-long high-power superconducting links with negligible energy dissipation. The present document describes the technologies and components that will be used to realise the project and is intended to serve as the basis for the detailed engineering design of HL-LHC.
• ### $\mu$SR study of noncentrosymmetric superconductor PbTaSe$_2$(1703.04932)

May 16, 2017 cond-mat.supr-con
We present muon spin rotation ($\mu$SR) measurements on the noncentrosymmetric superconductor PbTaSe$_2$. From measurements in an applied transverse field between $H_{c1}$ and $H_{c2}$, we extract the superfluid density as a function of temperature in the vortex state. This data can be fit with a fully gapped two-band model, consistent with previous evidence from ARPES, thermal conductivity, and resistivity. Furthermore, zero field measurements show no evidence for a time reversal symmetry breaking field greater than 0.05~G in the superconducting state. This makes exotic fully gapped spin-triplet states unlikely, and hence we contend that PbTaSe$_2$ is characterized by conventional BCS s-wave superconductivity in multiple bands.
• ### Design of beam optics for the Future Circular Collider e+e- -collider rings(1610.07170)

Oct. 23, 2016 hep-ex, physics.acc-ph
A beam optics scheme has been designed for the Future Circular Collider-e+e- (FCC-ee). The main characteristics of the design are: beam energy 45 to 175 GeV, 100 km circumference with two interaction points (IPs) per ring, horizontal crossing angle of 30 mrad at the IP and the crab-waist scheme [1] with local chromaticity correction. The crab-waist scheme is implemented within the local chromaticity correction system without additional sextupoles, by reducing the strength of one of the two sextupoles for vertical chromatic correction at each side of the IP. So-called "tapering" of the magnets is applied, which scales all fields of the magnets according to the local beam energy to compensate for the effect of synchrotron radiation (SR) loss along the ring. An asymmetric layout near the interaction region reduces the critical energy of SR photons on the incoming side of the IP to values below 100 keV, while matching the geometry to the beam line of the FCC proton collider (FCC-hh) [2] as closely as possible. Sufficient transverse/longitudinal dynamic aperture (DA) has been obtained, including major dynamical effects, to assure an adequate beam lifetime in the presence of beamstrahlung and top-up injection. In particular, a momentum acceptance larger than +/-2% has been obtained, which is better than the momentum acceptance of typical collider rings by about a factor of 2. The effects of the detector solenoids including their compensation elements are taken into account as well as synchrotron radiation in all magnets. The optics presented in this paper is a step toward a full conceptual design for the collider. A number of issues have been identified for further study.
• ### Relief of Frustration in the Heisenberg Pyrochlore Antiferromagnet Gd$_2$Pt$_2$O$_7$(1607.08657)

July 28, 2016 cond-mat.str-el
The gadolinium pyrochlores, Gd$_2B_2$O$_7$, are amongst the best realizations of antiferromagnetically coupled Heisenberg spins on a pyrochlore lattice. We present a magnetic characterization of Gd$_2$Pt$_2$O$_7$, a unique member of this family. Magnetic susceptibility, heat capacity, and muon spin relaxation measurements show that Gd$_2$Pt$_2$O$_7$ undergoes an antiferromagnetic ordering transition at $T_N = 1.6$ K. This transition is strongly first order, as indicated by the sharpness of the heat capacity anomaly, thermal hysteresis in the magnetic susceptibility, and a non-divergent relaxation rate in $\mu$SR. The form of the heat capacity below $T_N$ suggests that the ground state is an anisotropic collinear antiferromagnet with an excitation spectrum that is gapped by 0.245(1) meV. The ordering temperature in Gd$_2$Pt$_2$O$_7$, $T_N = 1.6$ K, is a substantial 160% increase from other gadolinium pyrochlores, which have been found to order at 1 K or lower. We attribute this enhancement in $T_N$ to the $B$-site cation, platinum, which, despite being non-magnetic, has a filled $5d$ $t_{2g}$ orbital and an empty $5d$ $e_g$ orbital that can facilitate superexchange. Thus, the magnetic frustration in Gd$_2$Pt$_2$O$_7$ is partially "relieved", thereby promoting magnetic order.
• ### Reconfigurable Optical Quantum Networks Using Multimode Quantum Frequency Combs and Pulse Shaping(1605.02303)

May 8, 2016 quant-ph
Multimode entanglement is quintessential for the design and fabrication of quantum networks, which play a central role in quantum information processing and quantum metrology. However, an experimental setup is generally constructed with a specific network configuration in mind and therefore exhibits reduced versatility and scalability. The present work demonstrates an on-demand, reconfigurable quantum network simulator, using an intrinsically multimode quantum resource and a homodyne detection apparatus. Without altering either the initial squeezing source or experimen- tal architecture, we realize the construction of thirteen cluster states of various size and connectivity as well as the implementation of a secret sharing protocol. In particular, this simulator enables the interrogation of quantum correlations and fluctuations for a Gaussian quantum network. This initi- ates a new avenue for implementing on-demand quantum information processing by only adapting the measurement process and not the experimental layout.
• ### Is "genuine multipartite entanglement" really genuine?(1603.05802)

March 18, 2016 quant-ph
The existence of non-local quantum correlations is certainly the most important specific property of the quantum world. However, it is a challenging task to distinguish correlations of classical origin from genuine quantum correlations, especially when the system involves more than two parties, for which different partitions must be simultaneously considered. In the case of mixed states, intermediate levels of correlations must be introduced, coined by the name inseparability. In this work, we revisit in more detail such a concept in the context of continuous-variable quantum optics. We consider a six-partite quantum state that we have effectively generated by the parametric downconversion of a femtosecond frequency comb, the full 12 x 12 covariance matrix of which has been experimentally determined. We show that, though this state does not exhibit "genuine entanglement", it is undoubtedly multipartite-entangled. The consideration of not only the entanglement of individual mode-decompositions but also of combinations of those solves the puzzle and exemplifies the importance of studying different categories of multipartite entanglement.
• This work is on the Physics of the B Factories. Part A of this book contains a brief description of the SLAC and KEK B Factories as well as their detectors, BaBar and Belle, and data taking related issues. Part B discusses tools and methods used by the experiments in order to obtain results. The results themselves can be found in Part C. Please note that version 3 on the archive is the auxiliary version of the Physics of the B Factories book. This uses the notation alpha, beta, gamma for the angles of the Unitarity Triangle. The nominal version uses the notation phi_1, phi_2 and phi_3. Please cite this work as Eur. Phys. J. C74 (2014) 3026.
• ### Adaptive Reduced-Rank Minimum Symbol-Error-Rate Receive Processing for Large-Scale Multiple-Antenna Systems(1510.07735)

Oct. 27, 2015 cs.IT, math.IT
In this work, we propose a novel adaptive reduced-rank receive processing strategy based on joint preprocessing, decimation and filtering (JPDF) for large-scale multiple-antenna systems. In this scheme, a reduced-rank framework is employed for linear receive processing and multiuser interference suppression based on the minimization of the symbol-error-rate (SER) cost function. We present a structure with multiple processing branches that performs a dimensionality reduction, where each branch contains a group of jointly optimized preprocessing and decimation units, followed by a linear receive filter. We then develop stochastic gradient (SG) algorithms to compute the parameters of the preprocessing and receive filters, along with a low-complexity decimation technique for both binary phase shift keying (BPSK) and $M$-ary quadrature amplitude modulation (QAM) symbols. In addition, an automatic parameter selection scheme is proposed to further improve the convergence performance of the proposed reduced-rank algorithms. Simulation results are presented for time-varying wireless environments and show that the proposed JPDF minimum-SER receive processing strategy and algorithms achieve a superior performance than existing methods with a reduced computational complexity.
• ### The First Data Release (DR1) of the LAMOST general survey(1505.01570)

May 7, 2015 astro-ph.GA, astro-ph.IM
The Large sky Area Multi-Object Spectroscopic Telescope (LAMOST) General Survey is a spectroscopic survey that will eventually cover approximately half of the celestial sphere and collect 10 million spectra of stars, galaxies and QSOs. Objects both in the pilot survey and the first year general survey are included in the LAMOST First Data Release (DR1). The pilot survey started in October 2011 and ended in June 2012, and the data have been released to the public as the LAMOST Pilot Data Release in August 2012. The general survey started in September 2012, and completed its first year of operation in June 2013. The LAMOST DR1 includes a total of 1202 plates containing 2,955,336 spectra, of which 1,790,879 spectra have observed signal-to-noise S/N >10. All data with S/N>2 are formally released as LAMOST DR1 under the LAMOST data policy. This data release contains a total of 2,204,696 spectra, of which 1,944,329 are stellar spectra, 12,082 are galaxy spectra and 5,017 are quasars. The DR1 includes not only spectra, but also three stellar catalogues with measured parameters: AFGK-type stars with high quality spectra (1,061,918 entries), A-type stars (100,073 entries), and M stars (121,522 entries). This paper introduces the survey design, the observational and instrumental limitations, data reduction and analysis, and some caveats. Description of the FITS structure of spectral files and parameter catalogues is also provided.
• ### MEIC Design Summary(1504.07961)

April 29, 2015 physics.acc-ph
This document summarizes the design of Jefferson Lab's electron-ion collider, MEIC, as of January 20, 2015, and describes the facility whose cost was estimated for the United States Department of Energy Nuclear Sciences Advisory Committee EIC cost review of January 26-28, 2015. In particular, each of the main technical systems within the collider is presented to the level of the best current information.
• ### Full multipartite entanglement of frequency comb Gaussian states(1409.5692)

Feb. 13, 2015 quant-ph
An analysis is conducted of the multipartite entanglement for Gaussian states generated by the parametric down-conversion of a femtosecond frequency comb. Using a recently introduced method for constructing optimal entanglement criteria, a family of tests is formulated for mode decompositions that extends beyond the traditional bipartition analyses. A numerical optimization over this family is performed to achieve maximal significance of entanglement verification. For experimentally prepared 4-, 6-, and 10-mode states, full entanglement is certified for all of the 14, 202, and 115974 possible nontrivial partitions, respectively.
• ### Robust MMSE Precoding for Multiuser MIMO Relay Systems using Switched Relaying and Side Information(1412.5231)

Dec. 17, 2014 cs.IT, math.IT
This study proposes a novel precoding scheme for multiuser multiple-input multiple-output (MIMO) relay systems in the presence of imperfect channel state information (CSI). The base station (BS) and the MIMO relay station (RS) are both equipped with the same codebook of unitary matrices. According to each element of the codebook, we create a latent precoding matrix pair, namely a BS precoding matrix and an RS precoding matrix. The RS precoding matrix is formed by multiplying the appropriate unitary matrix from the codebook by a power scaling factor. Based on the given CSI and a block of transmit symbols, the optimum precoding matrix pair, within the class of all possible latent precoding matrix pairs derived from the various unitary matrices, is selected by a suitable selection mechanism for transmission, which is designed to minimize the squared Euclidean distance between the pre-estimated received vector and the true transmit symbol vector. We develop a minimum mean square error (MMSE) design algorithm for the construction of the latent precoding matrix pairs. In the proposed scheme, rather than sending the complete processing matrix, only the index of the unitary matrix and its power scaling factor are sent by the BS to the RS. This significantly reduces the overhead. Simulation results show that compared to other recently reported precoding algorithms the proposed precoding scheme is capable of providing improved robustness against the effects of CSI estimation errors and multiuser interference.
• ### Robust Multi-Branch Tomlinson-Harashima Precoding in Cooperative MIMO Relay Systems(1409.5932)

Sept. 21, 2014 cs.IT, math.IT
This paper proposes the design of robust transceivers with Tomlinson-Harashima precoding (THP) for multiple-input multiple-output (MIMO) relay systems with amplify-and-forward (AF) protocols based on a multi-branch (MB) strategy. The MB strategy employs successive interference cancellation (SIC) on several parallel branches which are equipped with different ordering patterns so that each branch produces transmit signals by exploiting a certain ordering pattern. For each parallel branch, the proposed robust nonlinear transceiver design consists of THP at the source along with a linear precoder at the relay and a linear minimum-mean-squared-error (MMSE) receiver at the destination. By taking the channel uncertainties into account, the source and relay precoders are jointly optimised to minimise the mean-squared-error (MSE). We then employ a diagonalization method along with some attributes of matrix-monotone functions to convert the optimization problem with matrix variables into an optimization problem with scalar variables. We resort to an iterative method to obtain the solution for the relay and the source precoders via Karush-Kuhn-Tucker (KKT) conditions. An appropriate selection rule is developed to choose the nonlinear transceiver corresponding to the best branch for data transmission. Simulation results demonstrate that the proposed MB-THP scheme is capable of alleviating the effects of channel state information (CSI) errors and improving the robustness of the system.
• ### Low-Complexity Variable Forgetting Factor Constrained Constant Modulus RLS Algorithm for Adaptive Beamforming(1406.6998)

June 22, 2014 cs.OH
In this paper, a recursive least squares (RLS) based blind adaptive beamforming algorithm that features a new variable forgetting factor (VFF) mechanism is presented. The beamformer is designed according to the constrained constant modulus (CCM) criterion, and the proposed adaptive algorithm operates in the generalized sidelobe canceler (GSC) structure. A detailed study of its operating properties is carried out, including a convexity analysis and a mean squared error (MSE) analysis of its steady-state behavior. The results of numerical experiments demonstrate that the proposed VFF mechanism achieves a superior learning and tracking performance compared to other VFF mechanisms.
• ### Archimedean solid-like superconducting framework in phase-separated K0.8Fe1.6+xSe2 (0<=x<=0.15)(1401.1001)

Jan. 6, 2014 cond-mat.supr-con
The superconducting (SC) phase in the phase-separated (PS) K0.8Fe1.6+xSe2 (0<=x<=0.15) materials is found to crystallize on Archimedean solid-like frameworks, this structural feature originate from a spinodal phase separation (SPS) at around Ts~540K depending slightly on the Fe concentration. Two stable phases in K0.8Fe1.6+xSe2 are demonstrated to be the SC K0.5Fe2Se2 and antiferromagnetic (AFM) K0.8Fe1.6Se2. The spinodal waves go along the systematic [113] direction and result in notable lamellar structure as illustrated by using the strain-field theoretical simulation. The 3-dimentional SC framework is constructed by hollow truncated octahedra similar with what discussed for Archimedean solids. Based on this structural model, we can efficiently calculate the volume fraction of SC phase in this type of PS SC materials.
• ### Adaptive Reduced-Rank MBER Linear Receive Processing for Large Multiuser MIMO Systems(1303.3733)

March 15, 2013 cs.IT, math.IT
In this work, we propose a novel adaptive reduced-rank strategy based on joint interpolation, decimation and filtering (JIDF) for large multiuser multiple-input multiple-output (MIMO) systems. In this scheme, a reduced-rank framework is proposed for linear receive processing and multiuser interference suppression according to the minimization of the bit error rate (BER) cost function. We present a structure with multiple processing branches that performs dimensionality reduction, where each branch contains a group of jointly optimized interpolation and decimation units, followed by a linear receive filter. We then develop stochastic gradient (SG) algorithms to compute the parameters of the interpolation and receive filters along with a low-complexity decimation technique. Simulation results are presented for time-varying environments and show that the proposed MBER-JIDF receive processing strategy and algorithms achieve a superior performance to existing methods at a reduced complexity.
• ### Probing and modelling the localized self-mixing in a GaN/AlGaN field-effect terahertz detector(1203.1386)

In a GaN/AlGaN field-effect terahertz detector, the directional photocurrent is mapped in the two-dimensional space of the gate voltage and the drain/source bias. It is found that not only the magnitude, but also the polarity, of the photocurrent can be tuned. A quasistatic self-mixing model taking into account the localized terahertz field provides a quantitative description of the detector characteristics. Strongly localized self-mixing is confirmed. It is therefore important to engineer the spatial distribution of the terahertz field and its coupling to the field-effect channel on the sub-micron scale.
• ### Breathing oscillations of a trapped impurity in a Bose gas(1111.6154)

Nov. 26, 2011 cond-mat.quant-gas
Motivated by a recent experiment [J. Catani et al., arXiv:1106.0828v1 preprint, 2011], we study breathing oscillations in the width of a harmonically trapped impurity interacting with a separately trapped Bose gas. We provide an intuitive physical picture of such dynamics at zero temperature, using a time-dependent variational approach. In the Gross-Pitaevskii regime we obtain breathing oscillations whose amplitudes are suppressed by self trapping, due to interactions with the Bose gas. Introducing phonons in the Bose gas leads to the damping of breathing oscillations and non-Markovian dynamics of the width of the impurity, the degree of which can be engineered through controllable parameters. Our results reproduce the main features of the impurity dynamics observed by Catani et al. despite experimental thermal effects, and are supported by simulations of the system in the Gross-Pitaevskii regime. Moreover, we predict novel effects at lower temperatures due to self-trapping and the inhomogeneity of the trapped Bose gas.
• ### Combined phase space characterization at the PEP-II IP using single-beam and luminous-region measurements(physics/0607087)

July 10, 2006 physics.acc-ph
We present a novel method to characterize the e+/- phase space at the IP of the SLAC B-factory, that combines single-beam measurements with a detailed mapping of luminous-region observables. Transverse spot sizes are determined in the two rings with synchrotron-light monitors and extrapolated to the IP using measured lattice functions. The specific luminosity, which is proportional to the inverse product of the overlap IP beam sizes, is continuously monitored using radiative-Bhabha events. The spatial variation of the luminosity and of the transverse-boost distribution of the colliding e+/-, are measured using e+ e- --> mu+ mu- events reconstructed in the BaBar detector. The combination of these measurements provide constraints on the emittances, horizontal and vertical spot sizes, angular divergences and beta functions of both beams at the IP during physics data-taking. Preliminary results of this combined spot-size analysis are confronted with independent measurements of IP beta-functions and overlap IP beam sizes at low beam current.
• ### Parameters for a Super-Flavor-Factory(physics/0606034)

June 4, 2006 physics.acc-ph
A Super Flavor Factory, an asymmetric energy e+e- collider with a luminosity of order 10^36 cm-2s-1, can provide a sensitive probe of new physics in the flavor sector of the Standard Model. The success of the PEP-II and KEKB asymmetric colliders in producing unprecedented luminosity above 10^34 cm-2s-1 has taught us about the accelerator physics of asymmetric e+e- colliders in a new parameter regime. Furthermore, the success of the SLAC Linear Collider and the subsequent work on the International Linear Collider allow a new Super-Flavor collider to also incorporate linear collider techniques. This note describes the parameters of an asymmetric Flavor-Factory collider at a luminosity of order 10^36 cm-2s-1 at the Upsilon(4S) resonance and about 10^35 cm-2s-1 at the Tau production threshold. Such a collider would produce an integrated luminosity of about 10,000 fb-1 (10 ab-1) in a running year (10^7 sec) at the Upsilon(4S) resonance.
• ### SuperB: a linear high-luminosity B Factory(physics/0512235)

Dec. 23, 2005 physics.ins-det
This paper is based on the outcome of the activity that has taken place during the recent workshop on "SuperB in Italy" held in Frascati on November 11-12, 2005. The workshop was opened by a theoretical introduction of Marco Ciuchini and was structured in two working groups. One focused on the machine and the other on the detector and experimental issues. The present status on CP is mainly based on the results achieved by BaBar and Belle. Estabilishment of the indirect CP violation in B sector in 2001 and of the direct CP violation in 2004 thanks to the success of PEP-II and KEKB e+e- asymmetric B Factories operating at the center of mass energy corresponding to the mass of the Y(4s). With the two B Factories taking data, the Unitarity Triangle is now beginning to be overconstrained by improving the measurements of the sides and now also of the angles alpha, and gamma. We are also in presence of the very intriguing results about the measurements of sin(2 beta) in the time dependent analysis of decay channels via penguin loops, where b --> s sbar s and b --> s dbar d. Tau physics, in particular LFV search, as well as charm and ISR physics are important parts of the scientific program of a SuperB Factory. The physics case together with possible scenarios for the high luminosity SuperB Factory based on the concepts of the Linear Collider and the related experimental issues are discussed.
• ### Tracking Simulations Near Half-Integer Resonance at PEP-II(physics/0305086)

May 20, 2003 physics.acc-ph
Beam-beam simulations predict that PEP-II luminosity can be increased by operating the horizontal betatron tune near and above a half-integer resonance. However, effects of the resonance and its synchrotron sidebands significantly enhance betatron and chromatic perturbations which tend to reduce dynamic aperture. In the study, chromatic variation of horizontal tune near the resonance was minimized by optimizing local sextupoles in the Interaction Region. Dynamic aperture was calculated using tracking simulations in LEGO code. Dependence of dynamic aperture on the residual orbit, dispersion and distortion of beta function after correction was investigated.
• ### Lattice with Smaller Momentum Compaction Factor for PEP-II High Energy Ring(physics/0305088)

May 20, 2003 physics.acc-ph
At present, the PEP-II bunch length and vertical beta function at the Interaction Point (IP) are about of the same size. To increase luminosity, it is planned to gradually reduce the IP beta function. For the maximum effect, bunch length has to be also reduced to minimize luminosity loss caused by the hourglass effect at IP. One of the methods to achieve a smaller bunch length is to reduce momentum compaction factor. This paper discusses a lattice option for the High Energy Ring, where the nominal 60 degree cells in four arcs are replaced by 90 degree cells to reduce momentum compaction factor by 30% and bunch length by 16%. The increased focusing in 90 degree cells results in 40% stronger arc quadrupoles and 150% stronger arc sextupoles due to reduced dispersion and larger chromaticity. Tracking simulations predict that dynamic aperture for this lattice will be more than 10 times the rms size of a fully coupled beam for a horizontal emittance of 30 nm and IP beta function of 1cm. The lattice modification and results of simulations are presented.
• ### Lattice and Compensation Schemes for the PEP-II Interaction Region(physics/0106068)

June 20, 2001 physics.acc-ph
The PEP-II interaction region is designed to accommodate asymmetric beam energies, head-on collisions, small bunch spacing and provide low beta* for high luminosity. Local correction schemes are implemented to compensate non-linear chromaticity from the IP doublets as well as coupling, orbit and focusing effects from the 6 Tm asymmetric detector solenoid. The main IR optics features and local correction schemes are presented. MAD code is used for the optics calculations.