The QCD phase diagram lies at the heart of what the RHIC Physics Program is
all about. While RHIC has been operating very successfully at or close to its
maximum energy for almost a decade, it has become clear that this collider can
also be operated at lower energies down to 5 GeV without extensive upgrades. An
exploration of the full region of beam energies available at the RHIC facility
is imperative. The STAR detector, due to its large uniform acceptance and
excellent particle identification capabilities, is uniquely positioned to carry
out this program in depth and detail. The first exploratory beam energy scan
(BES) run at RHIC took place in 2010 (Run 10), since several STAR upgrades,
most importantly a full barrel Time of Flight detector, are now completed which
add new capabilities important for the interesting physics at BES energies. In
this document we discuss current proposed measurements, with estimations of the
accuracy of the measurements given an assumed event count at each beam energy.
A comparative study has been performed on Resistive Plate Chambers (RPC) made
of two different grades of bakelite paper laminates, produced and commercially
available in India. The chambers, operated in the streamer mode using argon,
tetrafluroethane and isobutane in 34:59:7 mixing ratio, are tested for the
efficiency and the stability with cosmic rays. A particular grade of bakelite
(P-120, NEMA LI-1989 Grade XXX), used for high voltage insulation in humid
conditions, was found to give satisfactory performance with stable efficiency
of > 96% continuously for more than 130 days. A thin coating of silicone fluid
on the inner surfaces of the bakelite RPC is found to be necessary for
operation of the detector.
In this paper we would like to present a few characteristics of the Resistive
Plate Chambers (RPC) made of a particular grade of bakelite paper laminates
(P-120, NEMA LI-1989 Grade XXX), produced and commercially available in India.
This particular grade is used for high voltage insulation in humid conditions.
The chambers are tested with cosmic rays in the streamer mode using argon,
tetrafluroethane and isobutane in 34:59:7 mixing ratio. In the first set of
detectors made with such grade, a thin coating of silicone fluid on the inner
surfaces of the bakelite was found to be necessary for operation of the
detector. Those silicone coated RPCs were found to give satisfactory
performance with stable efficiency of >90% continuously for a long period as
reported earlier. Results of the crosstalk measurement of these silicone coated
RPC will be presented in this paper. Very recently RPCs made with the same
grade of bakelite but having better surface finish, are found to give
equivalent performance even without any coating inside. Preliminary results of
this type of RPCs are also being presented.
Details concerning the design, fabrication and performance of STAR Photon
Multiplicity Detector (PMD) are presented. The PMD will cover the forward
region, within the pseudorapidity range 2.3--3.5, behind the forward time
projection chamber. It will measure the spatial distribution of photons in
order to study collective flow, fluctuation and chiral symmetry restoration.