-
To better understand the energy response of the Antineutrino Detector (AD),
the Daya Bay Reactor Neutrino Experiment installed a full Flash ADC readout
system on one AD that allowed for simultaneous data taking with the current
readout system. This paper presents the design, data acquisition, and
simulation of the Flash ADC system, and focuses on the PMT waveform
reconstruction algorithms. For liquid scintillator calorimetry, the most
critical requirement to waveform reconstruction is linearity. Several common
reconstruction methods were tested but the linearity performance was not
satisfactory. A new method based on the deconvolution technique was developed
with 1% residual non-linearity, which fulfills the requirement. The performance
was validated with both data and Monte Carlo (MC) simulations, and 1%
consistency between them has been achieved.
-
A system employing a desktop FADC has been developed to investigate the
features of 8 inches Hamamatsu PMT. The system stands out for its high-speed
and informative results as a consequence of adopting fast waveform sampling
technology. Recording full waveforms allows us to perform digital signal
processing, pulse shape analysis, and precision timing extraction. High
precision after pulse time and charge distribution characteristics are
presented in this manuscript. Other photomultipliers characteristics, such as
dark rate and transit time spread, can also be obtained by exploiting waveform
analysis using this system.
-
The Daya Bay Reactor Neutrino Experiment has measured a non-zero value of the
neutrino mixing angle $\theta_{13}$ with a significance of 7.7 standard
deviations by a rate-only a nalysis. The distortion of neutrino energy spectrum
carries additional oscillation information and can improve the sensitivity of
$\theta_{13}$ as well as measure neutrino mass splitting $\Delta m^{2}$ . A
rate plus shape analysis is performed and the results have been released in
August at NuFact 2013.
Detector energy non-linearity response study is crucial for the rate plus
shape analysis. In this contribution, We present A brief description of energy
non-linearity study at Daya Bay.
To better understand the energy response of the Antineutrino Detector (AD), the Daya Bay Reactor Neutrino Experiment installed a full Flash ADC readout system on one AD that allowed for simultaneous data taking with the current readout system. This paper presents the design, data acquisition, and simulation of the Flash ADC system, and focuses on the PMT waveform reconstruction algorithms. For liquid scintillator calorimetry, the most critical requirement to waveform reconstruction is linearity. Several common reconstruction methods were tested but the linearity performance was not satisfactory. A new method based on the deconvolution technique was developed with 1% residual non-linearity, which fulfills the requirement. The performance was validated with both data and Monte Carlo (MC) simulations, and 1% consistency between them has been achieved.
A system employing a desktop FADC has been developed to investigate the features of 8 inches Hamamatsu PMT. The system stands out for its high-speed and informative results as a consequence of adopting fast waveform sampling technology. Recording full waveforms allows us to perform digital signal processing, pulse shape analysis, and precision timing extraction. High precision after pulse time and charge distribution characteristics are presented in this manuscript. Other photomultipliers characteristics, such as dark rate and transit time spread, can also be obtained by exploiting waveform analysis using this system.
The Daya Bay Reactor Neutrino Experiment has measured a non-zero value of the neutrino mixing angle $\theta_{13}$ with a significance of 7.7 standard deviations by a rate-only a nalysis. The distortion of neutrino energy spectrum carries additional oscillation information and can improve the sensitivity of $\theta_{13}$ as well as measure neutrino mass splitting $\Delta m^{2}$ . A rate plus shape analysis is performed and the results have been released in August at NuFact 2013. Detector energy non-linearity response study is crucial for the rate plus shape analysis. In this contribution, We present A brief description of energy non-linearity study at Daya Bay.