• The present work investigates sidewall effects on the characteristics of three-dimensional (3D) compressible flows over a rectangular cavity with aspect ratios of $L/D=6$ and $W/D=2$ at $Re_D=10^4$ using large eddy simulations (LES). For the spanwise-periodic cavity flow, large pressure fluctuations are present in the shear layer and on the cavity aft wall due to spanwise vortex roll-ups and flow impingement. For the finite-span cavity with sidewalls, pressure fluctuations are reduced due to interference to the vortex roll-ups from the sidewalls. Flow oscillations are also reduced by increasing the Mach number from 0.6 to 1.4. Furthermore, secondary flow inside the cavity enhances kinetic energy transport in the spanwise direction. Moreover, 3D slotted jets are placed along the cavity leading edge with the objective of reducing flow oscillations. Steady blowing into the boundary layer is considered with momentum coefficient $C_\mu=0.0584$ and $0.0194$ for $M_\infty=0.6$ and $1.4$ cases, respectively. The three-dimensionality introduced to the flow by the jets inhibits large coherent roll-ups of the spanwise vortices in the shear layer, yielding $9-40\%$ reductions in rms pressure and rms velocity for both spanwise-periodic and finite-span cavities.
  • The stability properties of two- (2D) and three-dimensional (3D) compressible flows over a rectangular cavity with length-to-depth ratio of $L/D=6$ is analyzed at a free stream Mach number of $M_\infty=0.6$ and depth-based Reynolds number of $Re_D=502$. In this study, we closely examine the influence of three-dimensionality on the wake-mode that has been reported to exhibit high-amplitude fluctuations from the formation and ejection of large-scale spanwise vortices. Direct numerical simulation (DNS) and bi-global stability analysis are utilized to study the instability characteristics of the wake-mode. Using the bi-global stability analysis with the time-average flow as the base state, we capture the global stability properties of the wake-mode at a spanwise wavenumber of $\beta=0$. To uncover spanwise effects on the 2D wake-mode, 3D DNS are performed with cavity width-to-depth ratio of $W/D=1$ and $2$. We find that the 2D wake-mode is not present in the 3D cavity flow for a wider spanwise setting with $W/D=2$, in which spanwise structures are observed near the rear region of the cavity. These 3D instabilities are further investigated via bi-global stability analysis for spanwise wavelengths of $\lambda/D=0.5-2.0$ to reveal the eigenspectra of the 3D eigenmodes. Based on the findings of 2D and 3D global stability analysis, we conclude that the absence of the wake-mode in 3D rectangular cavity flows is due to the release of kinetic energy from the spanwise vortices to the streamwise vortical structures that develops from the spanwise instabilities.
  • We discuss the use of 3D printing to physically visualize (materialize) fluid flow structures. Such 3D models can serve as a refreshing hands-on means to gain deeper physical insights into the formation of complex coherent structures in fluid flows. In this short paper, we present a general procedure for taking 3D flow field data and producing a file format that can be supplied to a 3D printer, with two examples of 3D printed flow structures. A sample code to perform this process is also provided. 3D printed flow structures can not only deepen our understanding of fluid flows but also allow us to showcase our research findings to be held up-close in educational and outreach settings.