• ### Double Collins effect in $e^+ e^-\to\Lambda \bar\Lambda X$ process in a diquark spectator model(1802.01843)

Feb. 6, 2018 hep-ph, hep-ex
We study the Collins function $H^\perp_{1}$ of the $\Lambda$ hyperon, which describes the fragmentation of a transversely polarized quark into an unpolarized $\Lambda$ hyperon. We calculate $H^\perp_{1}$ for light quarks of the $\Lambda$ hyperon, in the diquark spectator model with a Gaussian form factor for the hyperon-quark-diquark vertex. The model calculation includes contributions from both the scalar diquark and vector diquark spectators. Using the model result, we estimate the weighted $\cos2\phi_0$ asymmetry in the process $e^+e^- \to \Lambda\bar{\Lambda}X$ contributed by the coupling of two Collins functions. The QCD evolution effects for the first $k_T$-moment of the Collins function and the unpolarized fragmentation function $D_1(z)$ are also included. The results show that asymmetry is sizable and measurable at the kinematical configurations of Belle and BaBar experiments. We also find that the evolution effects play an important role in the phenomenological analysis.
• ### Transverse polarization of the $\Lambda$ hyperon from unpolarized quark fragmentation in the diquark model(1706.03355)

June 30, 2017 hep-ph, hep-ex
We investigate the spin-dependent (naive) T-odd fragmentation function $D^\perp_{1T}$, which can provide an explanation on the transverse polarization of the $\Lambda^0$ hyperon produced in an unpolarized process. We calculate $D^\perp_{1T}$ for light flavors in the spectator diquark model, with a Gaussian form factor at the hyperon-quark-diquark vertex. We include in the calculation both the scalar diquark and axial-vector diquark spectators. We determine the values of the model parameters by fitting the unpolarized fragmentation function $D^\Lambda_1$ to the DSV parametrization for $D^\Lambda_1$. In addition, we compute the longitudinal polarization fragmentation function $G^\Lambda_1$ and compare it with the known parametrization of $G^\Lambda_1$. We also estimate the transverse polarizations of $\Lambda$ production, in both semi-inclusive deep inelastic scattering and single inclusive $e^+e^-$ annihilation.
• ### Polarized Lambda hyperon production in Semi-inclusive deep inelastic scattering off an unpolarized nulceon target(1611.07755)

April 25, 2017 hep-ph, hep-ex
We study the production of polarized $\Lambda$ hyperon in semi-inclusive deep inelastic scattering off an unpolarized target. We include the cases in which the $\Lambda$ hyperon is longitudinally polarized or transversely polarized, and in which the lepton beam is unpolarized or longitudinally polarized. Within the framework of the transverse momentum dependent factorization, we take into account the complete decomposition of the parton correlator for fragmentation up to twist-3. We present the cross section of the process to order $1/Q$. The expressions of the polarized structure functions, which may give rise to various spin asymmetries, are also given.
• ### Twist-3 T-odd fragmentation functions $G^\perp$ and $\tilde{G}^\perp$ in a spectator model(1607.01638)

Oct. 6, 2016 hep-ph
We present a calculation of the twist-3 T-odd chiral-even fragmentation functions $G^{\perp}$ and $\tilde{G}^{\perp}$ using a spectator model. We consider the effect gluon exchange to calculate all necessary one-loop diagrams for the quark-quark and quark-gluon-quark correlation functions. We find that the gluon loops corrections generate non-zero contribution to these two fragmentation function. We numerically calculate their half-$k_T$ moments by integrating over the transverse momentum and also verify the equation of motion relation among $G^{\perp}$, $\tilde{G}^{\perp}$ and the Collins function.
• ### Direct Imaging of Dynamic Glassy Behavior in a Strained Manganite Film(1306.3065)

Complex many-body interaction in perovskite manganites gives rise to a strong competition between ferromagnetic metallic and charge ordered phases with nanoscale electronic inhomogeneity and glassy behaviors. Investigating this glassy state requires high resolution imaging techniques with sufficient sensitivity and stability. Here, we present the results of a near-field microwave microscope imaging on the strain driven glassy state in a manganite film. The high contrast between the two electrically distinct phases allows direct visualization of the phase separation. The low temperature microscopic configurations differ upon cooling with different thermal histories. At sufficiently high temperatures, we observe switching between the two phases in either direction. The dynamic switching, however, stops below the glass transition temperature. Compared with the magnetization data, the phase separation was microscopically frozen, while spin relaxation was found in a short period of time.
• ### Central frequency measurement of the HLS-II storage ring(1508.03418)

Aug. 14, 2015 physics.acc-ph
Central frequency is a key parameter of storage rings. This paper presents the measurement of central frequency of the HLS-II storage ring using the sextupole modulation method. Firstly, the basis of central frequency measurement of the electron storage ring is briefly introduced. Then, the error sources and the optimized measurement method for the HLS-II storage ring are discussed. The workflow of the self-compiled Matlab script used in central frequency measurement is also described. In the end, the results achieved by using two methods to cross-check each other are shown. The measured value of the central frequency demonstrates that the real circumference of the HLS-II storage ring agrees well with the designed value.
• ### Beam size and position measurement based on logarithm processing algorithm in HLS II(1507.08515)

Aug. 3, 2015 hep-ex, physics.acc-ph
A logarithm processing algorithm to measure beam transverse size and position is proposed and preliminary experimental results in Hefei Light Source II (HLS II) are given. The algorithm is based on only 4 successive channels of 16 anode channels of multianode photomultiplier tube (MAPMT) R5900U-00-L16 which has typical rise time of 0.6 ns and effective area of 0.8x16 mm for a single anode channel. In the paper, we firstly elaborate the simulation results of the algorithm with and without channel inconsistency. Then we calibrate the channel inconsistency and verify the algorithm using general current signal processor Libera Photon in low-speed scheme. Finally we get turn-by-turn beam size and position and calculate the vertical tune in high-speed scheme. The experimental results show that measured values fit well with simulation results after channel differences are calibrated and the fractional part of the tune in vertical direction is 0.3628 which is very close to the nominal value 0.3621.
• ### Concept for a Future Super Proton-Proton Collider(1507.03224)

July 19, 2015 hep-ex, physics.acc-ph
Following the discovery of the Higgs boson at LHC, new large colliders are being studied by the international high-energy community to explore Higgs physics in detail and new physics beyond the Standard Model. In China, a two-stage circular collider project CEPC-SPPC is proposed, with the first stage CEPC (Circular Electron Positron Collier, a so-called Higgs factory) focused on Higgs physics, and the second stage SPPC (Super Proton-Proton Collider) focused on new physics beyond the Standard Model. This paper discusses this second stage.
• ### Unexpected edge conduction in HgTe quantum wells under broken time reversal symmetry(1212.6441)

June 2, 2015 cond-mat.mes-hall
The realization of quantum spin Hall (QSH) effect in HgTe quantum wells (QWs) is considered a milestone in the discovery of topological insulators. The QSH edge states are predicted to allow current to flow at the edges of an insulating bulk, as demonstrated in various experiments. A key prediction of QSH theory that remains to be experimentally verified is the breakdown of the edge conduction under broken time reversal symmetry (TRS). Here we first establish a rigorous framework for understanding the magnetic field dependence of electrostatically gated QSH devices. We then report unexpected edge conduction under broken TRS, using a unique cryogenic microwave impedance microscopy (MIM), on a 7.5 nm HgTe QW device with an inverted band structure. At zero magnetic field and low carrier densities, clear edge conduction is observed in the local conductivity profile of this device but not in the 5.5 nm control device whose band structure is trivial. Surprisingly, the edge conduction in the 7.5 nm device persists up to 9 T with little effect from the magnetic field. This indicates physics beyond simple QSH models, possibly associated with material- specific properties, other symmetry protection and/or electron-electron interactions.
• ### A waveguide overloaded cavity kicker for the HLS II longitudinal feedback system(1305.5838)

May 20, 2013 physics.acc-ph
In the upgrade project of Hefei Light Source (HLS II), a new digital longitudinal bunch-by-bunch feedback system will be developed to suppress the coupled bunch instabilities in the storage ring effectively. We design a new waveguide overloaded cavity longitudinal feedback kicker as the feedback actuator. The beam pipe of the kicker is racetrack shape so as to avoid a transition part to the octagonal vacuum chamber. The central frequency and the bandwidth of the kicker have been simulated and optimized to achieve design goals by the HFSS code. The higher shunt impedance can be obtained by using a nose cone to reduce the feedback power requirement. Before the kicker cavity was installed in the storage ring, a variety of measurements were carried out to check its performance. All these results of simulation and measurement are presented.
• ### Batch-fabricated cantilever probes with electrical shielding for nanoscale dielectric and conductivity imaging(1301.2402)

This paper presents the design and fabrication of batch-processed cantilever probes with electrical shielding for scanning microwave impedance microscopy. The diameter of the tip apex, which defines the electrical resolution, is less than 50 nm. The width of the stripline and the thicknesses of the insulation dielectrics are optimized for a small series resistance (< 5 W) and a small background capacitance (~ 1 pF), both critical for high sensitivity imaging on various samples. The coaxial shielding ensures that only the probe tip interacts with the sample. The structure of the cantilever is designed to be symmetric to balance the stresses and thermal expansions of different layers so that the cantilever remains straight under variable temperatures. Such shielded cantilever probes produced in the wafer scale will facilitate enormous applications on nanoscale dielectric and conductivity imaging.
• ### Unexpected Surface Implanted Layer in Static Random Access Memory Devices Observed by Microwave Impedance Microscope(1212.1655)

Dec. 7, 2012 cond-mat.mes-hall
Real-space mapping of doping concentration in semiconductor devices is of great importance for the microelectronic industry. In this work, a scanning microwave impedance microscope (MIM) is employed to resolve the local conductivity distribution of a static random access memory (SRAM) sample. The MIM electronics can also be adjusted to the scanning capacitance microscopy (SCM) mode, allowing both measurements on the same region. Interestingly, while the conventional SCM images match the nominal device structure, the MIM results display certain unexpected features, which originate from a thin layer of the dopant ions penetrating through the protective layers during the heavy implantation steps.