• ### An Augmented Nonlinear LMS for Digital Self-Interference Cancellation in Full-Duplex Direct-Conversion Transceivers(1710.04381)

July 17, 2018 cs.IT, math.IT
In future full-duplex communications, the cancellation of self-interference (SI) arising from hardware non-idealities will play an important role in the design of mobile-scale devices. To this end, we introduce an optimal digital SI cancellation solution for shared-antenna-based direct-conversion transceivers. To establish that the underlying widely linear signal model is not adequate for strong transmit signals, the impact of various circuit imperfections, including power amplifier (PA) distortion, frequency-dependent I/Q imbalance, quantization noise and thermal noise, on the performance of the conventional augmented least mean square (LMS) based SI canceller, is analyzed. In order to achieve a sufficient signal-to-interference-plus-noise ratio (SINR) when the nonlinear SI components are not negligible, we propose an augmented nonlinear LMS based SI canceller for a joint cancellation of both the linear and nonlinear SI components by virtue of a widely nonlinear model fit. A rigorous mean and mean square performance evaluation is conducted to justify the performance advantages of the proposed scheme over the conventional augmented LMS solution. Simulations on orthogonal frequency division multiplexing (OFDM)-based wireless local area network (WLAN) standard compliant waveforms support the analysis.
• ### Towards Budget-Driven Hardware Optimization for Deep Convolutional Neural Networks using Stochastic Computing(1805.04142)

May 10, 2018 cs.NE, cs.ET
Recently, Deep Convolutional Neural Network (DCNN) has achieved tremendous success in many machine learning applications. Nevertheless, the deep structure has brought significant increases in computation complexity. Largescale deep learning systems mainly operate in high-performance server clusters, thus restricting the application extensions to personal or mobile devices. Previous works on GPU and/or FPGA acceleration for DCNNs show increasing speedup, but ignore other constraints, such as area, power, and energy. Stochastic Computing (SC), as a unique data representation and processing technique, has the potential to enable the design of fully parallel and scalable hardware implementations of large-scale deep learning systems. This paper proposed an automatic design allocation algorithm driven by budget requirement considering overall accuracy performance. This systematic method enables the automatic design of a DCNN where all design parameters are jointly optimized. Experimental results demonstrate that proposed algorithm can achieve a joint optimization of all design parameters given the comprehensive budget of a DCNN.
• ### Thoracic Disease Identification and Localization with Limited Supervision(1711.06373)

April 24, 2018 cs.CV, stat.ML
Accurate identification and localization of abnormalities from radiology images play an integral part in clinical diagnosis and treatment planning. Building a highly accurate prediction model for these tasks usually requires a large number of images manually annotated with labels and finding sites of abnormalities. In reality, however, such annotated data are expensive to acquire, especially the ones with location annotations. We need methods that can work well with only a small amount of location annotations. To address this challenge, we present a unified approach that simultaneously performs disease identification and localization through the same underlying model for all images. We demonstrate that our approach can effectively leverage both class information as well as limited location annotation, and significantly outperforms the comparative reference baseline in both classification and localization tasks.
• ### Learning Topics using Semantic Locality(1804.04205)

April 11, 2018 cs.CL, cs.LG, cs.IR, stat.ML
The topic modeling discovers the latent topic probability of the given text documents. To generate the more meaningful topic that better represents the given document, we proposed a new feature extraction technique which can be used in the data preprocessing stage. The method consists of three steps. First, it generates the word/word-pair from every single document. Second, it applies a two-way TF-IDF algorithm to word/word-pair for semantic filtering. Third, it uses the K-means algorithm to merge the word pairs that have the similar semantic meaning. Experiments are carried out on the Open Movie Database (OMDb), Reuters Dataset and 20NewsGroup Dataset. The mean Average Precision score is used as the evaluation metric. Comparing our results with other state-of-the-art topic models, such as Latent Dirichlet allocation and traditional Restricted Boltzmann Machines. Our proposed data preprocessing can improve the generated topic accuracy by up to 12.99\%.
• ### Efficient Recurrent Neural Networks using Structured Matrices in FPGAs(1803.07661)

March 22, 2018 cs.NA, cs.LG, stat.ML
Recurrent Neural Networks (RNNs) are becoming increasingly important for time series-related applications which require efficient and real-time implementations. The recent pruning based work ESE suffers from degradation of performance/energy efficiency due to the irregular network structure after pruning. We propose block-circulant matrices for weight matrix representation in RNNs, thereby achieving simultaneous model compression and acceleration. We aim to implement RNNs in FPGA with highest performance and energy efficiency, with certain accuracy requirement (negligible accuracy degradation). Experimental results on actual FPGA deployments shows that the proposed framework achieves a maximum energy efficiency improvement of 35.7$\times$ compared with ESE.
• ### Image Dataset for Visual Objects Classification in 3D Printing(1803.00391)

March 22, 2018 cs.CV
The rapid development in additive manufacturing (AM), also known as 3D printing, has brought about potential risk and security issues along with significant benefits. In order to enhance the security level of the 3D printing process, the present research aims to detect and recognize illegal components using deep learning. In this work, we collected a dataset of 61,340 2D images (28x28 for each image) of 10 classes including guns and other non-gun objects, corresponding to the projection results of the original 3D models. To validate the dataset, we train a convolutional neural network (CNN) model for gun classification which can achieve 98.16% classification accuracy.
• ### C3PO: Database and Benchmark for Early-stage Malicious Activity Detection in 3D Printing(1803.07544)

March 20, 2018 cs.CV
Increasing malicious users have sought practices to leverage 3D printing technology to produce unlawful tools in criminal activities. Current regulations are inadequate to deal with the rapid growth of 3D printers. It is of vital importance to enable 3D printers to identify the objects to be printed, so that the manufacturing procedure of an illegal weapon can be terminated at the early stage. Deep learning yields significant rises in performance in the object recognition tasks. However, the lack of large-scale databases in 3D printing domain stalls the advancement of automatic illegal weapon recognition. This paper presents a new 3D printing image database, namely C3PO, which compromises two subsets for the different system working scenarios. We extract images from the numerical control programming code files of 22 3D models, and then categorize the images into 10 distinct labels. The first set consists of 62,200 images which represent the object projections on the three planes in a Cartesian coordinate system. And the second sets consists of sequences of total 671,677 images to simulate the cameras' captures of the printed objects. Importantly, we demonstrate that the weapons can be recognized in either scenario using deep learning based approaches using our proposed database. % We also use the trained deep models to build a prototype of object-aware 3D printer. The quantitative results are promising, and the future exploration of the database and the crime prevention in 3D printing are demanding tasks.
• ### C-LSTM: Enabling Efficient LSTM using Structured Compression Techniques on FPGAs(1803.06305)

March 14, 2018 cs.LG, cs.AR
Recently, significant accuracy improvement has been achieved for acoustic recognition systems by increasing the model size of Long Short-Term Memory (LSTM) networks. Unfortunately, the ever-increasing size of LSTM model leads to inefficient designs on FPGAs due to the limited on-chip resources. The previous work proposes to use a pruning based compression technique to reduce the model size and thus speedups the inference on FPGAs. However, the random nature of the pruning technique transforms the dense matrices of the model to highly unstructured sparse ones, which leads to unbalanced computation and irregular memory accesses and thus hurts the overall performance and energy efficiency. In contrast, we propose to use a structured compression technique which could not only reduce the LSTM model size but also eliminate the irregularities of computation and memory accesses. This approach employs block-circulant instead of sparse matrices to compress weight matrices and reduces the storage requirement from $\mathcal{O}(k^2)$ to $\mathcal{O}(k)$. Fast Fourier Transform algorithm is utilized to further accelerate the inference by reducing the computational complexity from $\mathcal{O}(k^2)$ to $\mathcal{O}(k\text{log}k)$. The datapath and activation functions are quantized as 16-bit to improve the resource utilization. More importantly, we propose a comprehensive framework called C-LSTM to automatically optimize and implement a wide range of LSTM variants on FPGAs. According to the experimental results, C-LSTM achieves up to 18.8X and 33.5X gains for performance and energy efficiency compared with the state-of-the-art LSTM implementation under the same experimental setup, and the accuracy degradation is very small.
• ### A Framework in CRM Customer Lifecycle: Identify Downward Trend and Potential Issues Detection(1802.08974)

Feb. 25, 2018 cs.AI, cs.CY
Customer retention is one of the primary goals in the area of customer relationship management. A mass of work exists in which machine learning models or business rules are established to predict churn. However, targeting users at an early stage when they start to show a downward trend is a better strategy. In downward trend prediction, the reasons why customers show a downward trend is of great interest in the industry as it helps the business to understand the pain points that customers suffer and to take early action to prevent them from churning. A commonly used method is to collect feedback from customers by either aggressively reaching out to them or by passively hearing from them. However, it is believed that there are a large number of customers who have unpleasant experiences and never speak out. In the literature, there is limited research work that provides a comprehensive and scientific approach to identify these "silent suffers". In this study, we propose a novel two-part framework: developing the downward prediction process and establishing the methodology to identify the reasons why customers are in the downward trend. In the first prediction part, we focus on predicting the downward trend, which is an earlier stage of the customer lifecycle compared to churn. In the second part, we propose an approach to figuring out the cause (of the downward trend) based on a causal inference method and semi-supervised learning. The proposed approach is capable of identifying potential silent sufferers. We take bad shopping experiences as inputs to develop the framework and validate it via a marketing A/B test in the real world. The test readout demonstrates the effectiveness of the framework by driving 88.5% incremental lift in purchase volume.
• ### Towards Ultra-High Performance and Energy Efficiency of Deep Learning Systems: An Algorithm-Hardware Co-Optimization Framework(1802.06402)

Feb. 18, 2018 cs.LG, stat.ML
Hardware accelerations of deep learning systems have been extensively investigated in industry and academia. The aim of this paper is to achieve ultra-high energy efficiency and performance for hardware implementations of deep neural networks (DNNs). An algorithm-hardware co-optimization framework is developed, which is applicable to different DNN types, sizes, and application scenarios. The algorithm part adopts the general block-circulant matrices to achieve a fine-grained tradeoff between accuracy and compression ratio. It applies to both fully-connected and convolutional layers and contains a mathematically rigorous proof of the effectiveness of the method. The proposed algorithm reduces computational complexity per layer from O($n^2$) to O($n\log n$) and storage complexity from O($n^2$) to O($n$), both for training and inference. The hardware part consists of highly efficient Field Programmable Gate Array (FPGA)-based implementations using effective reconfiguration, batch processing, deep pipelining, resource re-using, and hierarchical control. Experimental results demonstrate that the proposed framework achieves at least 152X speedup and 71X energy efficiency gain compared with IBM TrueNorth processor under the same test accuracy. It achieves at least 31X energy efficiency gain compared with the reference FPGA-based work.
• ### An Area and Energy Efficient Design of Domain-Wall Memory-Based Deep Convolutional Neural Networks using Stochastic Computing(1802.01016)

Feb. 3, 2018 cs.NE
With recent trend of wearable devices and Internet of Things (IoTs), it becomes attractive to develop hardware-based deep convolutional neural networks (DCNNs) for embedded applications, which require low power/energy consumptions and small hardware footprints. Recent works demonstrated that the Stochastic Computing (SC) technique can radically simplify the hardware implementation of arithmetic units and has the potential to satisfy the stringent power requirements in embedded devices. However, in these works, the memory design optimization is neglected for weight storage, which will inevitably result in large hardware cost. Moreover, if conventional volatile SRAM or DRAM cells are utilized for weight storage, the weights need to be re-initialized whenever the DCNN platform is re-started. In order to overcome these limitations, in this work we adopt an emerging non-volatile Domain-Wall Memory (DWM), which can achieve ultra-high density, to replace SRAM for weight storage in SC-based DCNNs. We propose DW-CNN, the first comprehensive design optimization framework of DWM-based weight storage method. We derive the optimal memory type, precision, and organization, as well as whether to store binary or stochastic numbers. We present effective resource sharing scheme for DWM-based weight storage in the convolutional and fully-connected layers of SC-based DCNNs to achieve a desirable balance among area, power (energy) consumption, and application-level accuracy.
• ### A Simple Nonlinearity-Tailored Probabilistic Shaping Distribution for Square QAM(1710.04134)

Oct. 12, 2017 cs.IT, math.IT
A new probabilistic shaping distribution that outperforms Maxwell-Boltzmann is studied for the nonlinear fiber channel. Additional gains of 0.1 bit/symbol MI or 0.2 dB SNR for both DP-256QAM and DP-1024QAM are reported after 200 km nonlinear fiber transmission.
• ### On the Closest Vector Problem for Lattices Constructed from Polynomials and Their Cryptographic Applications(1710.02265)

Oct. 6, 2017 cs.CR
In this paper, we propose new classes of trapdoor functions to solve the closest vector problem in lattices. Specifically, we construct lattices based on properties of polynomials for which the closest vector problem is hard to solve unless some trapdoor information is revealed. We thoroughly analyze the security of our proposed functions using state-of-the-art attacks and results on lattice reductions. Finally, we describe how our functions can be used to design quantum-safe encryption schemes with reasonable public key sizes. In particular, our scheme can offer around $106$ bits of security with a public key size of around $6.4$ $\texttt{KB}$. Our encryption schemes are efficient with respect to key generation, encryption and decryption.
• ### Entanglement concentration with different measurement in a 3-mode optomechanical system(1703.05629)

Sept. 30, 2017 quant-ph
In this work, we perform a series of phonon counting measurement with different methods in a 3-mode optomechanical system, and we compare the difference of the entanglement after measurement. In this article we focus on the two cases: imperfect measurement and on-off measurement. We find that whatever measurement you take, the entanglement will increase. The size of entanglement enhancement is the largest in perfect measurement, second in the imperfect measurement, and it is not obvious in the on-off measurement. We are sure that the more precise measurement information, the larger entanglement concentration.
• ### Theoretical Properties for Neural Networks with Weight Matrices of Low Displacement Rank(1703.00144)

Sept. 22, 2017 cs.CV, cs.LG, stat.ML
Recently low displacement rank (LDR) matrices, or so-called structured matrices, have been proposed to compress large-scale neural networks. Empirical results have shown that neural networks with weight matrices of LDR matrices, referred as LDR neural networks, can achieve significant reduction in space and computational complexity while retaining high accuracy. We formally study LDR matrices in deep learning. First, we prove the universal approximation property of LDR neural networks with a mild condition on the displacement operators. We then show that the error bounds of LDR neural networks are as efficient as general neural networks with both single-layer and multiple-layer structure. Finally, we propose back-propagation based training algorithm for general LDR neural networks.
• ### A Simple Analysis for Exp-concave Empirical Minimization with Arbitrary Convex Regularizer(1709.02909)

Sept. 9, 2017 math.OC, cs.LG, stat.ML
In this paper, we present a simple analysis of {\bf fast rates} with {\it high probability} of {\bf empirical minimization} for {\it stochastic composite optimization} over a finite-dimensional bounded convex set with exponential concave loss functions and an arbitrary convex regularization. To the best of our knowledge, this result is the first of its kind. As a byproduct, we can directly obtain the fast rate with {\it high probability} for exponential concave empirical risk minimization with and without any convex regularization, which not only extends existing results of empirical risk minimization but also provides a unified framework for analyzing exponential concave empirical risk minimization with and without {\it any} convex regularization. Our proof is very simple only exploiting the covering number of a finite-dimensional bounded set and a concentration inequality of random vectors.
• ### CirCNN: Accelerating and Compressing Deep Neural Networks Using Block-CirculantWeight Matrices(1708.08917)

Aug. 29, 2017 cs.AI, cs.CV, cs.LG, stat.ML
Large-scale deep neural networks (DNNs) are both compute and memory intensive. As the size of DNNs continues to grow, it is critical to improve the energy efficiency and performance while maintaining accuracy. For DNNs, the model size is an important factor affecting performance, scalability and energy efficiency. Weight pruning achieves good compression ratios but suffers from three drawbacks: 1) the irregular network structure after pruning; 2) the increased training complexity; and 3) the lack of rigorous guarantee of compression ratio and inference accuracy. To overcome these limitations, this paper proposes CirCNN, a principled approach to represent weights and process neural networks using block-circulant matrices. CirCNN utilizes the Fast Fourier Transform (FFT)-based fast multiplication, simultaneously reducing the computational complexity (both in inference and training) from O(n2) to O(nlogn) and the storage complexity from O(n2) to O(n), with negligible accuracy loss. Compared to other approaches, CirCNN is distinct due to its mathematical rigor: it can converge to the same effectiveness as DNNs without compression. The CirCNN architecture, a universal DNN inference engine that can be implemented on various hardware/software platforms with configurable network architecture. To demonstrate the performance and energy efficiency, we test CirCNN in FPGA, ASIC and embedded processors. Our results show that CirCNN architecture achieves very high energy efficiency and performance with a small hardware footprint. Based on the FPGA implementation and ASIC synthesis results, CirCNN achieves 6-102X energy efficiency improvements compared with the best state-of-the-art results.
• ### A Hierarchical Framework of Cloud Resource Allocation and Power Management Using Deep Reinforcement Learning(1703.04221)

Aug. 11, 2017 cs.AI, cs.DC
Automatic decision-making approaches, such as reinforcement learning (RL), have been applied to (partially) solve the resource allocation problem adaptively in the cloud computing system. However, a complete cloud resource allocation framework exhibits high dimensions in state and action spaces, which prohibit the usefulness of traditional RL techniques. In addition, high power consumption has become one of the critical concerns in design and control of cloud computing systems, which degrades system reliability and increases cooling cost. An effective dynamic power management (DPM) policy should minimize power consumption while maintaining performance degradation within an acceptable level. Thus, a joint virtual machine (VM) resource allocation and power management framework is critical to the overall cloud computing system. Moreover, novel solution framework is necessary to address the even higher dimensions in state and action spaces. In this paper, we propose a novel hierarchical framework for solving the overall resource allocation and power management problem in cloud computing systems. The proposed hierarchical framework comprises a global tier for VM resource allocation to the servers and a local tier for distributed power management of local servers. The emerging deep reinforcement learning (DRL) technique, which can deal with complicated control problems with large state space, is adopted to solve the global tier problem. Furthermore, an autoencoder and a novel weight sharing structure are adopted to handle the high-dimensional state space and accelerate the convergence speed. On the other hand, the local tier of distributed server power managements comprises an LSTM based workload predictor and a model-free RL based power manager, operating in a distributed manner.
• ### SEP-Nets: Small and Effective Pattern Networks(1706.03912)

June 13, 2017 cs.CV, cs.LG
While going deeper has been witnessed to improve the performance of convolutional neural networks (CNN), going smaller for CNN has received increasing attention recently due to its attractiveness for mobile/embedded applications. It remains an active and important topic how to design a small network while retaining the performance of large and deep CNNs (e.g., Inception Nets, ResNets). Albeit there are already intensive studies on compressing the size of CNNs, the considerable drop of performance is still a key concern in many designs. This paper addresses this concern with several new contributions. First, we propose a simple yet powerful method for compressing the size of deep CNNs based on parameter binarization. The striking difference from most previous work on parameter binarization/quantization lies at different treatments of $1\times 1$ convolutions and $k\times k$ convolutions ($k>1$), where we only binarize $k\times k$ convolutions into binary patterns. The resulting networks are referred to as pattern networks. By doing this, we show that previous deep CNNs such as GoogLeNet and Inception-type Nets can be compressed dramatically with marginal drop in performance. Second, in light of the different functionalities of $1\times 1$ (data projection/transformation) and $k\times k$ convolutions (pattern extraction), we propose a new block structure codenamed the pattern residual block that adds transformed feature maps generated by $1\times 1$ convolutions to the pattern feature maps generated by $k\times k$ convolutions, based on which we design a small network with $\sim 1$ million parameters. Combining with our parameter binarization, we achieve better performance on ImageNet than using similar sized networks including recently released Google MobileNets.
• ### Hardware-Driven Nonlinear Activation for Stochastic Computing Based Deep Convolutional Neural Networks(1703.04135)

March 12, 2017 cs.CV
Recently, Deep Convolutional Neural Networks (DCNNs) have made unprecedented progress, achieving the accuracy close to, or even better than human-level perception in various tasks. There is a timely need to map the latest software DCNNs to application-specific hardware, in order to achieve orders of magnitude improvement in performance, energy efficiency and compactness. Stochastic Computing (SC), as a low-cost alternative to the conventional binary computing paradigm, has the potential to enable massively parallel and highly scalable hardware implementation of DCNNs. One major challenge in SC based DCNNs is designing accurate nonlinear activation functions, which have a significant impact on the network-level accuracy but cannot be implemented accurately by existing SC computing blocks. In this paper, we design and optimize SC based neurons, and we propose highly accurate activation designs for the three most frequently used activation functions in software DCNNs, i.e, hyperbolic tangent, logistic, and rectified linear units. Experimental results on LeNet-5 using MNIST dataset demonstrate that compared with a binary ASIC hardware DCNN, the DCNN with the proposed SC neurons can achieve up to 61X, 151X, and 2X improvement in terms of area, power, and energy, respectively, at the cost of small precision degradation.In addition, the SC approach achieves up to 21X and 41X of the area, 41X and 72X of the power, and 198200X and 96443X of the energy, compared with CPU and GPU approaches, respectively, while the error is increased by less than 3.07%. ReLU activation is suggested for future SC based DCNNs considering its superior performance under a small bit stream length.
• ### SC-DCNN: Highly-Scalable Deep Convolutional Neural Network using Stochastic Computing(1611.05939)

Jan. 31, 2017 cs.CV
With recent advancing of Internet of Things (IoTs), it becomes very attractive to implement the deep convolutional neural networks (DCNNs) onto embedded/portable systems. Presently, executing the software-based DCNNs requires high-performance server clusters in practice, restricting their widespread deployment on the mobile devices. To overcome this issue, considerable research efforts have been conducted in the context of developing highly-parallel and specific DCNN hardware, utilizing GPGPUs, FPGAs, and ASICs. Stochastic Computing (SC), which uses bit-stream to represent a number within [-1, 1] by counting the number of ones in the bit-stream, has a high potential for implementing DCNNs with high scalability and ultra-low hardware footprint. Since multiplications and additions can be calculated using AND gates and multiplexers in SC, significant reductions in power/energy and hardware footprint can be achieved compared to the conventional binary arithmetic implementations. The tremendous savings in power (energy) and hardware resources bring about immense design space for enhancing scalability and robustness for hardware DCNNs. This paper presents the first comprehensive design and optimization framework of SC-based DCNNs (SC-DCNNs). We first present the optimal designs of function blocks that perform the basic operations, i.e., inner product, pooling, and activation function. Then we propose the optimal design of four types of combinations of basic function blocks, named feature extraction blocks, which are in charge of extracting features from input feature maps. Besides, weight storage methods are investigated to reduce the area and power/energy consumption for storing weights. Finally, the whole SC-DCNN implementation is optimized, with feature extraction blocks carefully selected, to minimize area and power/energy consumption while maintaining a high network accuracy level.
• ### Improved Dropout for Shallow and Deep Learning(1602.02220)

Dec. 4, 2016 cs.LG, stat.ML
Dropout has been witnessed with great success in training deep neural networks by independently zeroing out the outputs of neurons at random. It has also received a surge of interest for shallow learning, e.g., logistic regression. However, the independent sampling for dropout could be suboptimal for the sake of convergence. In this paper, we propose to use multinomial sampling for dropout, i.e., sampling features or neurons according to a multinomial distribution with different probabilities for different features/neurons. To exhibit the optimal dropout probabilities, we analyze the shallow learning with multinomial dropout and establish the risk bound for stochastic optimization. By minimizing a sampling dependent factor in the risk bound, we obtain a distribution-dependent dropout with sampling probabilities dependent on the second order statistics of the data distribution. To tackle the issue of evolving distribution of neurons in deep learning, we propose an efficient adaptive dropout (named \textbf{evolutional dropout}) that computes the sampling probabilities on-the-fly from a mini-batch of examples. Empirical studies on several benchmark datasets demonstrate that the proposed dropouts achieve not only much faster convergence and but also a smaller testing error than the standard dropout. For example, on the CIFAR-100 data, the evolutional dropout achieves relative improvements over 10\% on the prediction performance and over 50\% on the convergence speed compared to the standard dropout.
• ### Error Formulas for Ideal Interpolation(1506.05242)

June 18, 2016 math.NA
In this paper we study the algebraic structure of error formulas for ideal interpolation. We introduce the so-called "normal" error formulas and prove that the lexicographic order reduced Gr\"obner basis admits such a formula for all ideal interpolation. This formula is a generalization of the "good" error formula proposed by Carl de Boor. Finally, we discuss a Shekhtman's example and give an explicit form of "normal" error formula for this example.
• ### Unified Convergence Analysis of Stochastic Momentum Methods for Convex and Non-convex Optimization(1604.03257)

May 4, 2016 math.OC, stat.ML
Recently, {\it stochastic momentum} methods have been widely adopted in training deep neural networks. However, their convergence analysis is still underexplored at the moment, in particular for non-convex optimization. This paper fills the gap between practice and theory by developing a basic convergence analysis of two stochastic momentum methods, namely stochastic heavy-ball method and the stochastic variant of Nesterov's accelerated gradient method. We hope that the basic convergence results developed in this paper can serve the reference to the convergence of stochastic momentum methods and also serve the baselines for comparison in future development of stochastic momentum methods. The novelty of convergence analysis presented in this paper is a unified framework, revealing more insights about the similarities and differences between different stochastic momentum methods and stochastic gradient method. The unified framework exhibits a continuous change from the gradient method to Nesterov's accelerated gradient method and finally the heavy-ball method incurred by a free parameter, which can help explain a similar change observed in the testing error convergence behavior for deep learning. Furthermore, our empirical results for optimizing deep neural networks demonstrate that the stochastic variant of Nesterov's accelerated gradient method achieves a good tradeoff (between speed of convergence in training error and robustness of convergence in testing error) among the three stochastic methods.
• ### An indirect magnetic approach for determining entropy change in first-order magnetocaloric materials(1507.06133)

July 26, 2015 cond-mat.mtrl-sci
Taking into account the phase fraction during transition for the first-order magnetocaloric materials, an improved isothermal entropy change determination has been put forward based on the Clausius-Clapeyron (CC) equation. It was found that the isothermal entropy change value evaluated by our method is in excellent agreement with those determined from the Maxwell-relation (MR) for Ni-Mn-Sn Heusler alloys, which usually presents a weak field-induced phase transforming behavior. In comparison with MR, this method could give rise to a favorable result derived from few thermomagnetic measurements. More importantly, we can eliminate the isothermal entropy change overestimation derived from MR, which always exists in the cases of Ni-Co-Mn-In and MnAs systems with a prominent field-induced transition. These results confirmed that such a CC-equation-based method is quite practical and superior to the MR-based ones in eliminating the spurious spike and reducing measuring cost.