• Cross-term spatiotemporal encoding (xSPEN) is a recently introduced imaging approach delivering single-scan 2D NMR images with unprecedented resilience to field inhomogeneities. The method relies on performing a pre-acquisition encoding and a subsequent image read out while using the disturbing frequency inhomogeneities as part of the image formation processes, rather than as artifacts to be overwhelmed by the application of external gradients. This study introduces the use of this new single-shot MRI technique as a diffusion-monitoring tool, for accessing regions that have hitherto been unapproachable by diffusion-weighted imaging (DWI) methods. In order to achieve this, xSPEN MRIs intrinsic diffusion weighting effects are formulated using a customized, spatially-localized b-matrix analysis; with this, we devise a novel diffusion-weighting scheme that both exploits and overcomes xSPENs strong intrinsic weighting effects. The ability to provide reliable and robust diffusion maps in challenging head and brain regions, including the eyes and the optic nerves, is thus demonstrated in humans at 3T; new avenues for imaging other body regions are also briefly discussed.
  • A software system has been developed for the DArk Matter Particle Explorer (DAMPE) mission, a satellite-based experiment. The DAMPE software is mainly written in C++ and steered using Python script. This article presents an overview of the DAMPE offline software, including the major architecture design and specific implementation for simulation, calibration and reconstruction. The whole system has been successfully applied to DAMPE data analysis, based on which some results from simulation and beam test experiments are obtained and presented.
  • Purpose: Cross-term spatiotemporal encoding-xSPEN-is a single-shot imaging approach with exceptional resilience to field heterogeneities: its images do not require a priori information nor use post-acquisition corrections, to deliver faithfully the spatial distribution. xSPEN, however, suffers from SNR penalties due to its non-Fourier nature and due to diffusion losses- specially when desiring high resolution. This study explores partial Fourier transform approaches that acting along either the readout or the spatiotemporally-encoded dimensions, reduce these penalties. Methods: xSPEN uses an orthogonal gradient to read, in direct space, the lowbandwidth dimension. This changes substantially the nature of partial Fourier acquisitions vis-a-vis conventional imaging counterparts. A suitable theoretical analysis, however, allows one to implement these procedures along either the low-bandwidth or readout axes. Results: Partial Fourier single-shot xSPEN methods are illustrated on preclinical and human scanners. Owing to their reduction in the experimental acquisition times, these methods provide substantial sensitivity gains vis-a-vis previous implementations for a given targeted in-plane resolution. The magnitude of these gains is as expected. Conclusion: Partial Fourier approaches, particularly when implemented along the xSPEN axis, can provide substantial sensitivity advantages at minimal costs in the operation of the single-shot experiments.
  • DAMPE is a space-based mission designed as a high energy particle detector measuring cosmic-rays and $\gamma-$rays which was successfully launched on Dec.17, 2015. The BGO electromagnetic calorimeter is one of the key sub-detectors of DAMPE for energy measurement of electromagnetic showers produced by $e^{\pm}/{\gamma}$. Due to energy loss in dead material and energy leakage outside the calorimeter, the deposited energy in BGO underestimates the primary energy of incident $e^{\pm}/{\gamma}$. In this paper, based on detailed MC simulations, a parameterized energy correction method using the lateral and longitudinal information of electromagnetic showers has been studied and verified with data of electron beam test at CERN. The measurements of energy linearity and resolution are significantly improved by applying this correction method for electromagnetic showers.
  • Recurrent neural networks (RNNs), particularly long short-term memory (LSTM), have gained much attention in automatic speech recognition (ASR). Although some successful stories have been reported, training RNNs remains highly challenging, especially with limited training data. Recent research found that a well-trained model can be used as a teacher to train other child models, by using the predictions generated by the teacher model as supervision. This knowledge transfer learning has been employed to train simple neural nets with a complex one, so that the final performance can reach a level that is infeasible to obtain by regular training. In this paper, we employ the knowledge transfer learning approach to train RNNs (precisely LSTM) using a deep neural network (DNN) model as the teacher. This is different from most of the existing research on knowledge transfer learning, since the teacher (DNN) is assumed to be weaker than the child (RNN); however, our experiments on an ASR task showed that it works fairly well: without applying any tricks on the learning scheme, this approach can train RNNs successfully even with limited training data.
  • A BGO electromagnetic calorimeter (ECAL) is built for the DArk Matter Particle Explorer (DAMPE) mission. The effect of temperature on the BGO ECAL was investigated with a thermal vacuum experiment. The light output of a BGO crystal depends on temperature significantly. The temperature coefficient of each BGO crystal bar has been calibrated, and a correction method is also presented in this paper.
  • The DArk Matter Particle Explorer (DAMPE) is a space experiment designed to search for dark matter indirectly by measuring the spectra of photons, electrons, and positrons up to 10 TeV. The BGO electromagnetic calorimeter (ECAL) is its main sub-detector for energy measurement. In this paper, the instrumentation and development of the BGO ECAL is briefly described. The calibration on the ground, including the pedestal, minimum ionizing particle (MIP) peak, dynode ratio, and attenuation length with the cosmic rays and beam particles is discussed in detail. Also, the energy reconstruction results of the electrons from the beam test are presented.
  • Strain is known to greatly influence low temperature oxygen electrocatalysis on noble metal films, leading to significant enhancements in bifunctional activity essential for fuel cells and metal-air batteries. However, its catalytic impact on transition metal oxide thin films, such as perovskites, is not widely understood. Here, we epitaxially strain the conducting perovskite LaNiO3 to systematically determine its influence on both the oxygen reduction and oxygen evolution reaction. Uniquely, we found that compressive strain could significantly enhance both reactions, yielding a bifunctional catalyst that surpasses the performance of noble metals such as Pt. We attribute the improved bifunctionality to strain-induced splitting of the eg orbitals, which can customize orbital asymmetry at the surface. Analogous to strain-induced shifts in the d-band center of noble metals relative to Fermi level, such splitting can dramatically affect catalytic activity in this perovskite and other potentially more active oxides.
  • The DArk Matter Particle Explorer (DAMPE) is an orbital experiment aiming at searching for dark matter indirectly by measuring the spectra of photons, electrons and positrons originating from deep space. The BGO electromagnetic calorimeter is one of the key sub-detectors of the DAMPE, which is designed for high energy measurement with a large dynamic range from 5 GeV to 10 TeV. In this paper, some methods for energy correction are discussed and tried, in order to reconstruct the primary energy of the incident electrons. Different methods are chosen for the appropriate energy ranges. The results of Geant4 simulation and beam test data (at CERN) are presented.
  • In this work, we correlated the angular dependence of the Raman response of black phosphorus to its crystallographic orientation by using transmission electron microscopy and Raman spectroscopy. It was found that the intensity of the A2g mode reached a maximum when the polarization direction of the incident light was parallel to the zigzag crystallographic orientation. Notably, it was further confirmed that the zigzag crystallographic direction exhibited superior conductance and carrier mobility. Because of the lattice extension along the armchair direction, an intensification of the anisotropic Raman response was observed. This work provides direct evidence of the correlation between anisotropic properties and crystallographic direction and represents a turning point in the discussion of the angular-dependent electronic properties of black phosphorus.
  • A deep learning approach has been proposed recently to derive speaker identifies (d-vector) by a deep neural network (DNN). This approach has been applied to text-dependent speaker recognition tasks and shows reasonable performance gains when combined with the conventional i-vector approach. Although promising, the existing d-vector implementation still can not compete with the i-vector baseline. This paper presents two improvements for the deep learning approach: a phonedependent DNN structure to normalize phone variation, and a new scoring approach based on dynamic time warping (DTW). Experiments on a text-dependent speaker recognition task demonstrated that the proposed methods can provide considerable performance improvement over the existing d-vector implementation.
  • Low-frequency words place a major challenge for automatic speech recognition (ASR). The probabilities of these words, which are often important name entities, are generally under-estimated by the language model (LM) due to their limited occurrences in the training data. Recently, we proposed a word-pair approach to deal with the problem, which borrows information of frequent words to enhance the probabilities of low-frequency words. This paper presents an extension to the word-pair method by involving multiple `predicting words' to produce better estimation for low-frequency words. We also employ this approach to deal with out-of-language words in the task of multi-lingual speech recognition.
  • Pre-training is crucial for learning deep neural networks. Most of existing pre-training methods train simple models (e.g., restricted Boltzmann machines) and then stack them layer by layer to form the deep structure. This layer-wise pre-training has found strong theoretical foundation and broad empirical support. However, it is not easy to employ such method to pre-train models without a clear multi-layer structure,e.g., recurrent neural networks (RNNs). This paper presents a new pre-training approach based on knowledge transfer learning. In contrast to the layer-wise approach which trains model components incrementally, the new approach trains the entire model as a whole but with an easier objective function. This is achieved by utilizing soft targets produced by a prior trained model (teacher model). Compared to the conventional layer-wise methods, this new method does not care about the model structure, so can be used to pre-train very complex models. Experiments on a speech recognition task demonstrated that with this approach, complex RNNs can be well trained with a weaker deep neural network (DNN) model. Furthermore, the new method can be combined with conventional layer-wise pre-training to deliver additional gains.
  • Recent research shows that deep neural networks (DNNs) can be used to extract deep speaker vectors (d-vectors) that preserve speaker characteristics and can be used in speaker verification. This new method has been tested on text-dependent speaker verification tasks, and improvement was reported when combined with the conventional i-vector method. This paper extends the d-vector approach to semi text-independent speaker verification tasks, i.e., the text of the speech is in a limited set of short phrases. We explore various settings of the DNN structure used for d-vector extraction, and present a phone-dependent training which employs the posterior features obtained from an ASR system. The experimental results show that it is possible to apply d-vectors on semi text-independent speaker recognition, and the phone-dependent training improves system performance.
  • To answer the call of introducing more Bayesian techniques to organizational research (e.g., Kruschke, Aguinis, & Joo, 2012; Zyphur & Oswald, 2013), we propose a Bayesian approach for meta-analysis with power prior in this article. The primary purpose of this method is to allow meta-analytic researchers to control the contribution of each individual study to an estimated overall effect size though power prior. This is due to the consideration that not all studies included in a meta-analysis should be viewed as equally reliable, and that by assigning more weights to reliable studies with power prior, researchers may obtain an overall effect size that reflects the population effect size more accurately. We use the relationship between high-performance work systems and financial performance as an example to illustrate how to apply this method to organizational research. We also provide free online software that can be used to conduct Bayesian meta-analysis proposed in this study. Research implications and future directions are discussed.
  • We report on the production and characterization of liquid scintillators for the detection of electron antineutrinos by the Daya Bay Reactor Neutrino Experiment. One hundred eighty-five tons of gadolinium-loaded (0.1% by mass) liquid scintillator (Gd-LS) and two hundred tons of unloaded liquid scintillator (LS) were successfully produced from a linear-alkylbenzene (LAB) solvent in six months. The scintillator properties, the production and purification systems, and the quality assurance and control (QA/QC) procedures are described.
  • A method using multiple imputation and bootstrap for dealing with missing data in mediation analysis is introduced and implemented in SAS. Through simulation studies, it is shown that the method performs well for both MCAR and MAR data without and with auxiliary variables. It is also shown that the method works equally well for MNAR data if auxiliary variables related to missingness are included. The application of the method is demonstrated through the analysis of a subset of data from the National Longitudinal Survey of Youth.
  • Micromegas is a type of micro-pattern gaseous detector currently under R&D for applications in rare event search experiments. Here we report the performance of a Micromegas structure constructed with a micromesh thermo-bonded to a readout plane, motivated by its potential application in two-phase xenon detectors for dark matter and neutrinoless double beta decay experiments. The study is carried out in pure xenon at room temperature. Measurements with alpha particles from the Americium-241 source showed that gas gains larger than 200 can be obtained at xenon pressure up to 3 atm. Gamma rays down to 8 keV were observed with such a device.
  • Towards the development of a useful mechanism for hydrogen storage, we have studied the hydrogenation of single-walled carbon nanotubes with atomic hydrogen using core-level photoelectron spectroscopy and x-ray absorption spectroscopy. We find that atomic hydrogen creates C-H bonds with the carbon atoms in the nanotube walls and such C-H bonds can be com-pletely broken by heating to 600 oC. We demonstrate approximately 65+/-15 at % hydrogenation of carbon atoms in the single-walled carbon nanotubes which is equivalent to 5.1+/-1.2 weight % hydrogen capacity. We also show that the hydrogenation is a reversible process.