• Distributed Estimation of State and Parameters in Multi-Agent Cooperative Load Manipulation(1602.01891)

Sept. 23, 2018 cs.MA, math.OC, cs.RO, cs.SY
We present two distributed methods for the estimation of the kinematic parameters, the dynamic parameters, and the kinematic state of an unknown planar body manipulated by a decentralized multi-agent system. The proposed approaches rely on the rigid body kinematics and dynamics, on nonlinear observation theory, and on consensus algorithms. The only three requirements are that each agent can exert a 2D wrench on the load, it can measure the velocity of its contact point, and that the communication graph is connected. Both theoretical nonlinear observability analysis and convergence proofs are provided. The first method assumes constant parameters while the second one can deal with time-varying parameters and can be applied in parallel to any task-oriented control law. For the cases in which a control law is not provided, we propose a distributed and safe control strategy satisfying the observability condition. The effectiveness and robustness of the estimation strategy is showcased by means of realistic MonteCarlo simulations.
• Epidemic spreading in modular time-varying networks(1710.01355)

Oct. 3, 2017 physics.soc-ph
We investigate the effects of modular and temporal connectivity patterns on epidemic spreading. To this end, we introduce and analytically characterise a model of time-varying networks with tunable modularity. Within this framework, we study the epidemic size of Susceptible-Infected-Recovered, SIR, models and the epidemic threshold of Susceptible-Infected-Susceptible, SIS, models. Interestingly, we find that while the presence of tightly connected clusters inhibit SIR processes, it speeds up SIS diseases. In this case, we observe that heterogeneous temporal connectivity patterns and modular structures induce a reduction of the threshold with respect to time-varying networks without communities. We confirm the theoretical results by means of extensive numerical simulations both on synthetic graphs as well as on a real modular and temporal network.
• The HPS electromagnetic calorimeter(1610.04319)

Feb. 2, 2017 hep-ex, nucl-ex, physics.ins-det
The Heavy Photon Search experiment (HPS) is searching for a new gauge boson, the so-called "heavy photon." Through its kinetic mixing with the Standard Model photon, this particle could decay into an electron-positron pair. It would then be detectable as a narrow peak in the invariant mass spectrum of such pairs, or, depending on its lifetime, by a decay downstream of the production target. The HPS experiment is installed in Hall-B of Jefferson Lab. This article presents the design and performance of one of the two detectors of the experiment, the electromagnetic calorimeter, during the runs performed in 2015-2016. The calorimeter's main purpose is to provide a fast trigger and reduce the copious background from electromagnetic processes through matching with a tracking detector. The detector is a homogeneous calorimeter, made of 442 lead-tungstate (PbWO4) scintillating crystals, each read out by an avalanche photodiode coupled to a custom trans-impedance amplifier.
• This report, based on the Dark Sectors workshop at SLAC in April 2016, summarizes the scientific importance of searches for dark sector dark matter and forces at masses beneath the weak-scale, the status of this broad international field, the important milestones motivating future exploration, and promising experimental opportunities to reach these milestones over the next 5-10 years.
• Design and realization of a facility for the characterization of Silicon Avalanche PhotoDiodes(1504.01589)

April 7, 2015 hep-ex, physics.ins-det
We present the design, construction, and performance of a facility for the characterization of Silicon Avalanche Photodiodes in the operating temperature range between -2 $^\circ$C and 25 $^\circ$C. The system can simultaneously measure up to 24 photo-detectors, in a completely automatic way, within one day of operations. The measured data for each sensor are: the internal gain as a function of the bias voltage and temperature, the gain variation with respect to the bias voltage, and the dark current as a function of the gain. The systematic uncertainties have been evaluated during the commissioning of the system to be of the order of 1%. This paper describes in detail the facility design and layout, and the procedure employed to characterize the sensors. The results obtained from the measurement of the 380 Avalanche Photodiodes of the CLAS12-Forward Tagger calorimeter detector are then reported, as the first example of the massive usage of the facility.
• Motility fractionation of bacteria by centrifugation(1310.2753)

Oct. 10, 2013 cond-mat.soft
Centrifugation is a widespread laboratory technique used to separate mixtures into fractions characterized by a specific size, weight or density. We demonstrate that centrifugation can be also used to separate swimming cells having different motility. To do this we study self-propelled bacteria under the influence of an external centrifugal field. Using dynamic image correlation spectroscopy we measure the spatially resolved motility of bacteria after centrifugation. A significant gradient in swimming-speeds is observed for increasing centrifugal speeds. Our results can be reproduced by a model that treats bacteria as "hot" colloidal particles having a diffusion coefficient that depends on the swimming speed.
• An Automatic Validation System for Interferometry Density Measurements in the ENEA-FTU Tokamak Based on Soft- Computing(physics/0111193)

In this paper, an automatic sensor validation strategy for the measurements of plasma line density in the ENEA-FTU tokamak is presented. Density measurements are performed by a 5-channel DCN interferometer. The approach proposed is based on the design of a neural model of the observed system., i.e. a model able to emulate the behavior of a fault-free sensor and of a two-stage fuzzy system able to detect the occurence of a fault by using a set of suitable indicators. The fault diagnosis and classification is also accomplished. The validation strategy has been implemented and embedded in an interactive software tool installed at FTU. Statistics concerning the rate of fault detection agree with the rate of uncertainty usually achieved in the post-pulse manual validation.