-
Machine learning models in practical settings are typically confronted with
changes to the distribution of the incoming data. Such changes can severely
affect the model performance, leading for example to misclassifications of
data. This is particularly apparent in the domain of bionic hand prostheses,
where machine learning models promise faster and more intuitive user
interfaces, but are hindered by their lack of robustness to everyday
disturbances, such as electrode shifts. One way to address changes in the data
distribution is transfer learning, that is, to transfer the disturbed data to a
space where the original model is applicable again. In this contribution, we
propose a novel expectation maximization algorithm to learn linear
transformations that maximize the likelihood of disturbed data after the
transformation. We also show that this approach generalizes to discriminative
models, in particular learning vector quantization models. In our evaluation on
data from the bionic prostheses domain we demonstrate that our approach can
learn a transformation which improves classification accuracy significantly and
outperforms all tested baselines, if few data or few classes are available in
the target domain.
-
We give an exact analytical results for diffusion with a power-law position
dependent diffusion coefficient along the main channel (backbone) on a comb and
grid comb structures. For the mean square displacement along the backbone of
the comb we obtain behavior $\langle x^2(t)\rangle\sim t^{1/(2-\alpha)}$, where
$\alpha$ is the power-law exponent of the position dependent diffusion
coefficient $D(x)\sim |x|^{\alpha}$. Depending on the value of $\alpha$ we
observe different regimes, from anomalous subdiffusion, superdiffusion, and
hyperdiffusion. For the case of the fractal grid we observe the mean square
displacement, which depends on the fractal dimension of the structure of the
backbones, i.e., $\langle x^2(t)\rangle\sim t^{(1+\nu)/(2-\alpha)}$, where
$0<\nu<1$ is the fractal dimension of the backbones structure. The reduced
probability distribution functions for both cases are obtained by help of the
Fox $H$-functions.
-
We measure the energy emitted by extensive air showers in the form of radio
emission in the frequency range from 30 to 80 MHz. Exploiting the accurate
energy scale of the Pierre Auger Observatory, we obtain a radiation energy of
15.8 \pm 0.7 (stat) \pm 6.7 (sys) MeV for cosmic rays with an energy of 1 EeV
arriving perpendicularly to a geomagnetic field of 0.24 G, scaling
quadratically with the cosmic-ray energy. A comparison with predictions from
state-of-the-art first-principle calculations shows agreement with our
measurement. The radiation energy provides direct access to the calorimetric
energy in the electromagnetic cascade of extensive air showers. Comparison with
our result thus allows the direct calibration of any cosmic-ray radio detector
against the well-established energy scale of the Pierre Auger Observatory.
-
The Auger Engineering Radio Array (AERA) is part of the Pierre Auger
Observatory and is used to detect the radio emission of cosmic-ray air showers.
These observations are compared to the data of the surface detector stations of
the Observatory, which provide well-calibrated information on the cosmic-ray
energies and arrival directions. The response of the radio stations in the 30
to 80 MHz regime has been thoroughly calibrated to enable the reconstruction of
the incoming electric field. For the latter, the energy deposit per area is
determined from the radio pulses at each observer position and is interpolated
using a two-dimensional function that takes into account signal asymmetries due
to interference between the geomagnetic and charge-excess emission components.
The spatial integral over the signal distribution gives a direct measurement of
the energy transferred from the primary cosmic ray into radio emission in the
AERA frequency range. We measure 15.8 MeV of radiation energy for a 1 EeV air
shower arriving perpendicularly to the geomagnetic field. This radiation energy
-- corrected for geometrical effects -- is used as a cosmic-ray energy
estimator. Performing an absolute energy calibration against the
surface-detector information, we observe that this radio-energy estimator
scales quadratically with the cosmic-ray energy as expected for coherent
emission. We find an energy resolution of the radio reconstruction of 22% for
the data set and 17% for a high-quality subset containing only events with at
least five radio stations with signal.
-
Neutrinos in the cosmic ray flux with energies near 1 EeV and above are
detectable with the Surface Detector array of the Pierre Auger Observatory. We
report here on searches through Auger data from 1 January 2004 until 20 June
2013. No neutrino candidates were found, yielding a limit to the diffuse flux
of ultra-high energy neutrinos that challenges the Waxman-Bahcall bound
predictions. Neutrino identification is attempted using the broad
time-structure of the signals expected in the SD stations, and is efficiently
done for neutrinos of all flavors interacting in the atmosphere at large zenith
angles, as well as for "Earth-skimming" neutrino interactions in the case of
tau neutrinos. In this paper the searches for downward-going neutrinos in the
zenith angle bins $60^\circ-75^\circ$ and $75^\circ-90^\circ$ as well as for
upward-going neutrinos, are combined to give a single limit. The $90\%$ C.L.
single-flavor limit to the diffuse flux of ultra-high energy neutrinos with an
$E^{-2}$ spectrum in the energy range $1.0 \times 10^{17}$ eV - $2.5 \times
10^{19}$ eV is $E_\nu^2 dN_\nu/dE_\nu < 6.4 \times 10^{-9}~ {\rm GeV~ cm^{-2}~
s^{-1}~ sr^{-1}}$.
-
A measurement of the cosmic-ray spectrum for energies exceeding
$4{\times}10^{18}$ eV is presented, which is based on the analysis of showers
with zenith angles greater than $60^{\circ}$ detected with the Pierre Auger
Observatory between 1 January 2004 and 31 December 2013. The measured spectrum
confirms a flux suppression at the highest energies. Above $5.3{\times}10^{18}$
eV, the "ankle", the flux can be described by a power law $E^{-\gamma}$ with
index $\gamma=2.70 \pm 0.02 \,\text{(stat)} \pm 0.1\,\text{(sys)}$ followed by
a smooth suppression region. For the energy ($E_\text{s}$) at which the
spectral flux has fallen to one-half of its extrapolated value in the absence
of suppression, we find
$E_\text{s}=(5.12\pm0.25\,\text{(stat)}^{+1.0}_{-1.2}\,\text{(sys)}){\times}10^{19}$
eV.
-
In this letter we study the electronic structures and optical properties of
partially and fully fluorinated graphene by a combination of abinitio G0W0
calculations and large-scale multi-orbital tight-binding simulations. We find
that for partially fluorinated graphene, the appearance of paired fluorine
atoms is more favorable than unpaired atoms. We also show that different types
of structural disorder, such as carbon vacancies, fluorine vacancies, fluorine
vacancy-clusters and fluorine armchair- and zigzag-clusters, will introduce
different types of midgap states and extra excitations within the optical gap.
Furthermore we argue that the local formation of $sp^3$ bonds upon fluorination
can be distinguished from other disorder inducing mechanisms which do not
destroy the $sp^2$ hybrid orbitals by measuring the polarization rotation of
passing polarized light.
-
The phloem vascular system facilitates transport of energy-rich sugar and
signaling molecules in plants, thus permitting long range communication within
the organism and growth of non-photosynthesizing organs such as roots and
fruits. The flow is driven by osmotic pressure, generated by differences in
sugar concentration between distal parts of the plant. The phloem is an
intricate distribution system, and many questions about its regulation and
structural diversity remain unanswered. Here, we investigate the phloem
structure in the simplest possible geometry: a linear leaf, found, for example,
in the needles of conifer trees. We measure the phloem structure in four tree
species representing a diverse set of habitats and needle sizes, from 1 cm
(\textit{Picea omorika}) to 35 cm (\textit{Pinus palustris}). We show that the
phloem shares common traits across these four species and find that the size of
its conductive elements obeys a power law. We present a minimal model that
accounts for these common traits and takes into account the transport strategy
and natural constraints. This minimal model predicts a power law phloem
distribution consistent with transport energy minimization, suggesting that
energetics are more important than translocation speed at the leaf level.
-
Model checking is an important aim of the theoretical computer science. It
enables the verification of a model with a set of properties such as liveness,
deadlock or safety. One of the typical modelling techniques are Petri nets they
are well understood and can be used for a model checking. Reconfigurable Petri
nets are based on a Petri nets with a set of rules. These rules can be used
dynamically to change the net. Missing is the possibility to verify a
reconfigurable net and properties such as deadlocks or liveness. This paper
introduces a conversion from reconfigurable Petri net to Maude, that allows us
to fill the gap. It presents a net transformation approach which is based on
Maude's equation- and rewrite logic as well as the LTLR model checker.
-
Plants create sugar in the mesophyll cells of their leaves by photosynthesis.
This sugar, mostly sucrose, has to be loaded via the bundle sheath into the
phloem vascular system (the sieve elements), where it is distributed to growing
parts of the plant. We analyze the feasibility of a particular loading
mechanism, active symplasmic loading, also called the polymer trap mechanism,
where sucrose is transformed into heavier sugars, such as raffinose and
stachyose, in the intermediary-type companion cells bordering the sieve
elements in the minor veins of the phloem. Keeping the heavier sugars from
diffusing back requires that the plasmodesmata connecting the bundle sheath
with the intermediary cell act as extremely precise filters, which are able to
distinguish between molecules that differ by less than 20% in size. In our
modeling, we take into account the coupled water and sugar movement across the
relevant interfaces, without explicitly considering the chemical reactions
transforming the sucrose into the heavier sugars. Based on the available data
for plasmodesmata geometry, sugar concentrations and flux rates, we conclude
that this mechanism can in principle function. We find that the water flow
through the plasmodesmata, which has not been quantified before, contributes
only 10-20% to the sucrose flux into the intermediary cells, while the main
part is transported by diffusion. On the other hand, the subsequent sugar
translocation into the sieve elements would very likely be carried
predominantly by bulk water flow through the plasmodesmata. Thus, in contrast
to apoplasmic loaders, all the necessary water for phloem translocation would
be supplied in this way with no need for additional water uptake across the
plasma membranes of the phloem.
-
Contributions of the Pierre Auger Collaboration to the 33rd International
Cosmic Ray Conference, Rio de Janeiro, Brazil, July 2013