• This collection of studies on new physics at the LHC constitutes the report of the supersymmetry working group at the Workshop `Physics at TeV Colliders', Les Houches, France, 2007. They cover the wide spectrum of phenomenology in the LHC era, from alternative models and signatures to the extraction of relevant observables, the study of the MSSM parameter space and finally to the interplay of LHC observations with additional data expected on a similar time scale. The special feature of this collection is that while not each of the studies is explicitely performed together by theoretical and experimental LHC physicists, all of them were inspired by and discussed in this particular environment.
  • Precision measurement of the stop mass at the ILC is done in a method based on cross-sections measurements at two different center-of-mass energies. This allows to minimize both the statistical and systematic errors. In the framework of the MSSM, a light stop, compatible with electro-weak baryogenesis, is studied in its decay into a charm jet and neutralino, the Lightest Supersymmetric Particle(LSP), as a candidate of dark matter. This takes place for a small stop-neutralino mass difference.
  • Scalar top studies at the ILC are reviewed from initial sensitivity studies to a new precision mass determination method.
  • Most supersymmetric models predict new particles within the reach of the next generation of colliders. For an understanding of the model structure and the mechanism(s) of electroweak symmetry breaking, it is important to know the masses of the new particles precisely. The measurement of the mass of the scalar partner of the top quark (stop) at an e+e- collider is studied. A relatively light stop is motivated by attempts to explain electroweak baryogenesis and can play an important role in dark matter annihilation. A method is presented which makes use of cross-section measurements near the pair-production threshold as well as at higher center-of-mass energies. It is shown that this method does not only increase the statistical precision, but also reduces the influence of systematic uncertainties, which can be important. Numerical results are presented, based on a realistic event simulation, for two signal selection strategies: using conventional selection cuts, and using an Iterative Discriminant Analysis (IDA). While the analysis of stops is particularly challenging due to the possibility of stop hadronization and fragmentation, the general procedure could be applied to many precision mass measurements.
  • Light scalar top quarks with a small mass difference with respect to the neutralino mass are of particular cosmological interest. This study uses an Iterative Discriminant Analysis method to optimize the expected selection efficiency at a International Linear Collider (ILC). A previous study at sqrt(s)=260 GeV with 50 fb-1 has been extended to sqrt(s)=500 GeV with 500 fb-1, and results from both studies are compared.
  • Light scalar top quarks with a small mass difference with respect to the neutralino mass are of particular cosmological interest. This study uses an Iterative Discriminant Analysis method to optimize the expected selection efficiency at a International Linear Collider (ILC).
  • A vertex detector concept of the Linear Collider Flavour Identification (LCFI) collaboration, which studies pixel detectors for heavy quark flavour identification, has been implemented in simulations for c-quark tagging in scalar top studies. The production and decay of scalar top quarks (stops) is particularly interesting for the development of the vertex detector as only two c-quarks and missing energy (from undetected neutralinos) are produced for light stops. Previous studies investigated the vertex detector design in scenarios with large mass differences between stop and neutralino, corresponding to large visible energy in the detector. In this study we investigate the tagging performance dependence on the vertex detector design in a scenario with small visible energy for the International Linear Collider (ILC).
  • Muon ID at the ILC (physics/0609018)

    Sept. 2, 2006 physics.ins-det
    This paper describes a new way to reconstruct and identify muons with high efficiency and high pion rejection. Since muons at the ILC are often produced with or in jets, for many of the physics channels of interest[1], an efficient algorithm to deal with the identification and separation of particles within jets is important. The algorithm at the core of the method accounts for the effects of the magnetic field and for the loss of energy by charged particles due to ionization in the detector. We have chosen to develop the analysis within the setup of one of the Linear Collider Concept Detectors adopted by the US. Within b-pair production jets, particles cover a wide range in momenta; however ~ 80% of the particles have a momentum below 30 GeV[2]. Our study, focused on bbar-b jets, is preceded by a careful analysis of single energy particles between 2 and 50 GeV. As medium energy particles are a substantial component of the jets, many of the particles lose part of their energy in the calorimeters and the solenoid coil before reaching the muon detector where they may have energy below 2 GeV. To deal with this problem we have implemented a Runge-Kutta correction of the calculated trajectory to better handle these lower energy particles. The multiple scattering and other stochastic processes, more important at lower energy, is addressed by a Kalman-filter integrated into the reconstruction algorithm. The algorithm provides a unique and powerful separation of muons from pions. The 5 Tesla magnetic field from a solenoid surrounds the hadron calorimeter and allows the reconstruction and precision momentum measurement down to a few GeV.
  • The precision determination of scalar top quark properties will play an important role at a future International Linear Collider (ILC). Recent and ongoing studies are discussed for different experimental topologies in the detector. First results are presented for small mass differences between the scalar top and neutralino masses. This corresponds to a small expected visible energy in the detector. An ILC will be a unique accelerator to explore this scenario. In addition to finding the existence of light stop quarks, the precise measurement of their properties is crucial for testing their impact on the dark matter relic abundance and the mechanism of electroweak baryogenesis. Significant sensitivity for mass differences down to 5 GeV are obtained. The simulation is based on a fast and realistic detector simulation. A vertex detector concept of the Linear Collider Flavor Identification (LCFI)collaboration, which studies pixel detectors for heavy quark flavour identification, is implemented in the simulations for c-quark tagging. The study extends simulations for large mass differences (large visible energy) for which aspects of different detector simulations, the vertex detector design, and different methods for the determination of the scalar top mass are discussed. Based on the detailed simulations we study the uncertainties for the dark matter density predictions and their estimated uncertainties from various sources. In the region of parameters where stop-neutralino co-annihilation leads to a value of the relic density consistent with experimental results, as precisely determined by the Wilkinson Microwave Anisotropy Probe (WMAP), the stop-neutralino mass difference is small and the ILC will be able to explore this region efficiently.
  • In the Muon package under study, the tracks are extrapolated using an algorithm which accounts for the magnetic field and the ionization (dE/dx). We improved the calculation of the field dependent term to increase the muon detection efficiency at lower momenta using a Runge-Kutta method. The muon identification and hadron separation in b-bbar jets is reported with the improved software. In the same framework, the utilization of the Kalman filter is introduced. The principle of the Kalman filter is described in some detail with the propagation matrix, with the Runge-Kutta term included, and the effect on low momenta single muons particles is described.
  • Evolution of the Muon-ID package originally written by R. Markeloff at NIU. The original method used a helical swimmer to extrapolate the tracks from the Interaction Point and to collect hits in all sub-detectors: the electromagnetic and hadronic calorimeters and the muon detector. The package was modified to replace the swimmer by a stepper which does account both for the effects of the magnetic field and for the losses by ionization in the material encountered by the particle. The Modified package shows a substantial improvement in the efficiency of muon identification. It was applied on bbar-b jets and the muon detection efficiency and purity was studied. Further improvement should be reached by accounting for stochastic processes via the utilization of the Kalman filter.
  • The muons reconstruction package for the SID/ILC detector has been extended to include the Electro-Magnetic Calorimeter. The procedure previously used to reconstruct the charged tracks, an helical fit approximation, has been replaced by a step by step analytical method accounting for the magnetic field and the energy loss by ionization. The trajectory of the muons and the impact of the method on the muon identification efficiency is analyzed. One compares the behavior of muons of different energies in the (x,y)plane and the (px,py) plane of the sub-detectors.
  • Feb. 21, 2006 hep-ph
    The work contained herein constitutes a report of the "Beyond the Standard Model'' working group for the Workshop "Physics at TeV Colliders", Les Houches, France, 2-20 May, 2005. We present reviews of current topics as well as original research carried out for the workshop. Supersymmetric and non-supersymmetric models are studied, as well as computational tools designed in order to facilitate their phenomenology.
  • The Minimal Supersymmetric Standard Model opens the possibility of electroweak baryogenesis provided that the light scalar top quark (stop) is lighter than the top quark. In addition, the lightest neutralino is an ideal candidate to explain the existence of dark matter. For a light stop with mass close to the lightest neutralino, the stop-neutralino co-annihilation mechanism becomes efficient, thus rendering the predicted dark matter density compatible with observations. Such a stop may however remain elusive at hadron colliders. Here it is shown that a future linear collider provides a unique opportunity to detect and study the light stop. The production of stops with small stop-neutralino mass differences is studied in a detailed experimental analysis with a realistic detector simulation including a CCD vertex detector for flavor tagging. Furthermore, the linear collider, by precision measurements of superpartner masses and mixing angles, also allows to determine the dark matter relic density with an accuracy comparable to recent astrophysical observations.
  • A compelling framework to explain dark matter and electroweak baryogenesis is supersymmetry with light scalar top quarks (stops) and a small mass difference between the stop and the lightest neutralino. In this work, the stop detection capability at the ILC for small mass differences between the stop and the neutralino is studied. The analysis is based on a fast and realistic detector simulation. Significant sensitivity for mass differences down to 5 GeV is obtained. It is discussed how the relevant parameters of the scalar tops can be extracted and used to compute the dark matter density in the universe.
  • The CKM collaboration is proposing to measure the branching ratio of the rare K decay (K+ --> pi+ nu nubar) at the Main Injector at Fermilab. Our goal is to be able to observe about 100 events, for a Standard Model branching ratio of about 1.0E-10. This implies that we must be able to reduce the background to a few events.
  • High statistics data for the K+ -> mu+ nu gamma decay can allow the precision determination of the kaon structure dependent form factors and the kaon polarizability. This study is possible at the proposed FNAL CKM experiment. CKM (Charged Kaons at the Main injector) is a decay-in-flight spectrometer with two RICH, and designed to run at the main injector with a high kaon flux. The radiative decay data will be taken complementary to the primary CKM effort to study the rare kaon decay (K to pi nu nubar) for which CKM was primarily designed. We summarize here the underlying physics of K ->mu nu gamma, the experimental status, and how the CKM spectrometer will be adapted for this study.