• ### Performance of the PADME calorimeter prototype at the DA$\Phi$NE BTF(1611.05649)

Nov. 17, 2016 hep-ex, physics.ins-det
The PADME experiment at the DA$\Phi$NE Beam-Test Facility (BTF) aims at searching for invisible decays of the dark photon by measuring the final state missing mass in the process $e^+e^- \to \gamma+ A'$, with $A'$ undetected. The measurement requires the determination of the 4-momentum of the recoil photon, performed using a homogeneous, highly segmented BGO crystals calorimeter. We report the results of the test of a 5$\times$5 crystals prototype performed with an electron beam at the BTF in July 2016.
• ### The Importance of Worker Reputation Information in Microtask-Based Crowd Work Systems(1605.08261)

May 26, 2016 cs.HC
This paper presents the first systematic investigation of the potential performance gains for crowd work systems, deriving from available information at the requester about individual worker reputation. In particular, we first formalize the optimal task assignment problem when workers' reputation estimates are available, as the maximization of a monotone (submodular) function subject to Matroid constraints. Then, being the optimal problem NP-hard, we propose a simple but efficient greedy heuristic task allocation algorithm. We also propose a simple "maximum a-posteriori" decision rule and a decision algorithm based on message passing. Finally, we test and compare different solutions, showing that system performance can greatly benefit from information about workers' reputation. Our main findings are that: i) even largely inaccurate estimates of workers' reputation can be effectively exploited in the task assignment to greatly improve system performance; ii) the performance of the maximum a-posteriori decision rule quickly degrades as worker reputation estimates become inaccurate; iii) when workers' reputation estimates are significantly inaccurate, the best performance can be obtained by combining our proposed task assignment algorithm with the message-passing decision algorithm.
• The NA48/2 Collaboration at CERN has accumulated unprecedented statistics of rare kaon decays in the Ke4 modes: Ke4(+-) ($K^\pm \to \pi^+ \pi^- e^\pm \nu$) and Ke4(00) ($K^\pm \to \pi^0 \pi^0 e^\pm \nu$) with nearly one percent background contamination. The detailed study of form factors and branching rates, based on these data, has been completed recently. The results brings new inputs to low energy strong interactions description and tests of Chiral Perturbation Theory (ChPT) and lattice QCD calculations. In particular, new data support the ChPT prediction for a cusp in the $\pi^0\pi^0$ invariant mass spectrum at the two charged pions threshold for Ke4(00) decay. New final results from an analysis of about 400 $K^\pm \to \pi^\pm \gamma \gamma$ rare decay candidates collected by the NA48/2 and NA62 experiments at CERN during low intensity runs with minimum bias trigger configurations are presented. The results include a model-independent decay rate measurement and fits to ChPT description.
• This work is on the Physics of the B Factories. Part A of this book contains a brief description of the SLAC and KEK B Factories as well as their detectors, BaBar and Belle, and data taking related issues. Part B discusses tools and methods used by the experiments in order to obtain results. The results themselves can be found in Part C. Please note that version 3 on the archive is the auxiliary version of the Physics of the B Factories book. This uses the notation alpha, beta, gamma for the angles of the Unitarity Triangle. The nominal version uses the notation phi_1, phi_2 and phi_3. Please cite this work as Eur. Phys. J. C74 (2014) 3026.
• ### Impact of Clustering on the Performance of Network De-anonymization(1508.02017)

Aug. 9, 2015 cs.SI
Recently, graph matching algorithms have been successfully applied to the problem of network de-anonymization, in which nodes (users) participating to more than one social network are identified only by means of the structure of their links to other members. This procedure exploits an initial set of seed nodes large enough to trigger a percolation process which correctly matches almost all other nodes across the different social networks. Our main contribution is to show the crucial role played by clustering, which is a ubiquitous feature of realistic social network graphs (and many other systems). Clustering has both the effect of making matching algorithms more vulnerable to errors, and the potential to dramatically reduce the number of seeds needed to trigger percolation, thanks to a wave-like propagation effect. We demonstrate these facts by considering a fairly general class of random geometric graphs with variable clustering level, and showing how clever algorithms can achieve surprisingly good performance while containing matching errors.
• The NA62 experiment will begin taking data in 2015. Its primary purpose is a 10% measurement of the branching ratio of the ultrarare kaon decay $K^+ \to \pi^+ \nu \bar{ \nu }$, using the decay in flight of kaons in an unseparated beam with momentum 75 GeV/c.The detector and analysis technique are described here.
• The NA48/2 Collaboration at CERN has accumulated and analysed unprecedented statistics of rare kaon decays in the $K_{e4}$ modes: $K_{e4}(+-)$ ($K^\pm \to \pi^+ \pi^- e^\pm \nu$) and $K_{e4}(00)$ ($K^\pm \to \pi^0 \pi^0 e^\pm \nu$) with nearly one percent background contamination. It leads to the improved measurement of branching fractions and detailed form factor studies. New final results from the analysis of 381 $K^\pm \to \pi^\pm \gamma \gamma$ rare decay candidates collected by the NA48/2 and NA62 experiments at CERN are presented. The results include a decay rate measurement and fits to Chiral Perturbation Theory (ChPT) description.
• ### Stochastic Optimization of Service Provision with Selfish Users(1309.3984)

We develop a computationally efficient technique to solve a fairly general distributed service provision problem with selfish users and imperfect information. In particular, in a context in which the service capacity of the existing infrastructure can be partially adapted to the user load by activating just some of the service units, we aim at finding the configuration of active service units that achieves the best trade-off between maintenance (e.g.\ energetic) costs for the provider and user satisfaction. The core of our technique resides in the implementation of a belief-propagation (BP) algorithm to evaluate the cost configurations. Numerical results confirm the effectiveness of our approach.
• ### The large-angle photon veto system for the NA62 experiment at the CERN SPS(1207.6021)

July 25, 2012 hep-ex, physics.ins-det
The branching ratio (BR) for the decay K^+ \to \pi^+\nu\bar{\nu} is a sensitive probe for new physics. The NA62 experiment at the CERN SPS will measure this BR to within about 10%. To reject the background from dominant kaon decays with final state photons, the large-angle photon vetoes (LAVs) must detect photons of energy as low as 200 MeV with an inefficiency of less than 10^{-4}. The LAV detectors make use of lead glass blocks recycled from the OPAL electromagnetic calorimeter barrel. We describe the mechanical design and challenges faced during construction, the characterization of the lead glass blocks and solutions adopted for monitoring their performance, and the development of front-end electronics to allow simultaneous time and energy measurements over an extended dynamic range using the time over-threshold technique. Our results are based on test-beam data and are reproduced by a detailed Monte Carlo simulation that includes the readout chain.
• ### The NA62 LAV front-end electronics(1111.5768)

Nov. 24, 2011 hep-ex, physics.ins-det
The branching ratio for the decay $K^+ \to \pi^+\nu\bar{\nu}$ is sensitive to new physics; the NA62 experiment will measure it to within about 10%. To reject the dominant background from channels with final state photons, the large-angle vetoes (LAVs) must detect particles with better than 1 ns time resolution and 10% energy resolution over a very large energy range. Our custom readout board uses a time-over-threshold discriminator coupled to a TDC as a straightforward solution to satisfy these requirements. A prototype of the readout system was extensively tested together with the ANTI-A2 large angle veto module at CERN in summer 2010.
• ### The Large-Angle Photon Veto System for the NA62 Experiment at CERN(1111.4075)

Nov. 17, 2011 physics.ins-det
The branching ratio (BR) for the decay K^+ \rightarrow \pi^+ \nu \bar{\nu} is a sensitive probe for new physics. The NA62 experiment at the CERN SPS will measure this BR to within about 10%. To reject the dominant background from channels with final state photons, the large-angle vetoes (LAVs) must detect photons of energy as low as 200 MeV with an inefficiency of less than 10^-4, as well as provide energy and time measurements with resolutions of 10% and 1 ns for 1 GeV photons. The LAV detectors make creative reuse of lead glass blocks recycled from the OPAL electromagnetic calorimeter barrel. We describe the mechanical design and challenges faced during construction, the characterization of the lead glass blocks and solutions adopted for monitoring their performance, and the development of front-end electronics to allow simultaneous time and energy measurements over an extended dynamic range using the time-over-threshold technique. Our results are based on test-beam data and are reproduced by a detailed Monte Carlo simulation that includes the readout chain.
• ### A prototype large-angle photon veto detector for the P326 experiment at CERN(0711.3398)

Nov. 21, 2007 physics.ins-det
The P326 experiment at the CERN SPS has been proposed with the purpose of measuring the branching ratio for the decay K^+ \to \pi^+ \nu \bar{\nu} to within 10%. The photon veto system must provide a rejection factor of 10^8 for \pi^0 decays. We have explored two designs for the large-angle veto detectors, one based on scintillating tiles and the other using scintillating fibers. We have constructed a prototype module based on the fiber solution and evaluated its performance using low-energy electron beams from the Frascati Beam-Test Facility. For comparison, we have also tested a tile prototype constructed for the CKM experiment, as well as lead-glass modules from the OPAL electromagnetic barrel calorimeter. We present results on the linearity, energy resolution, and time resolution obtained with the fiber prototype, and compare the detection efficiency for electrons obtained with all three instruments.
• ### Running CMS software on GRID Testbeds(physics/0306038)

June 4, 2003 physics.comp-ph
Starting in the middle of November 2002, the CMS experiment undertook an evaluation of the European DataGrid Project (EDG) middleware using its event simulation programs. A joint CMS-EDG task force performed a "stress test" by submitting a large number of jobs to many distributed sites. The EDG testbed was complemented with additional CMS-dedicated resources. A total of ~ 10000 jobs consisting of two different computational types were submitted from four different locations in Europe over a period of about one month. Nine sites were active, providing integrated resources of more than 500 CPUs and about 5 TB of disk space (with the additional use of two Mass Storage Systems). Descriptions of the adopted procedures, the problems encountered and the corresponding solutions are reported. Results and evaluations of the test, both from the CMS and the EDG perspectives, are described.
• ### EU DataGRID testbed management and support at CERN(cs/0305059)

May 30, 2003 cs.DC
In this paper we report on the first two years of running the CERN testbed site for the EU DataGRID project. The site consists of about 120 dual-processor PCs distributed over several testbeds used for different purposes: software development, system integration, and application tests. Activities at the site included test productions of MonteCarlo data for LHC experiments, tutorials and demonstrations of GRID technologies, and support for individual users analysis. This paper focuses on node installation and configuration techniques, service management, user support in a gridified environment, and includes considerations on scalability and security issues and comparisons with "traditional" production systems, as seen from the administrator point of view.
• ### KANGA(ROO): Handling the micro-DST of the BaBar Experiment with ROOT(physics/0206067)

June 18, 2002 physics.comp-ph
A system based on ROOT for handling the micro-DST of the BaBar experiment is described. The purpose of the Kanga system is to have micro-DST data available in a format well suited for data distribution within a world-wide collaboration with many small sites. The design requirements, implementation and experience in practice after three years of data taking by the BaBar experiment are presented.