We measure the energy emitted by extensive air showers in the form of radio
emission in the frequency range from 30 to 80 MHz. Exploiting the accurate
energy scale of the Pierre Auger Observatory, we obtain a radiation energy of
15.8 \pm 0.7 (stat) \pm 6.7 (sys) MeV for cosmic rays with an energy of 1 EeV
arriving perpendicularly to a geomagnetic field of 0.24 G, scaling
quadratically with the cosmic-ray energy. A comparison with predictions from
state-of-the-art first-principle calculations shows agreement with our
measurement. The radiation energy provides direct access to the calorimetric
energy in the electromagnetic cascade of extensive air showers. Comparison with
our result thus allows the direct calibration of any cosmic-ray radio detector
against the well-established energy scale of the Pierre Auger Observatory.
The Auger Engineering Radio Array (AERA) is part of the Pierre Auger
Observatory and is used to detect the radio emission of cosmic-ray air showers.
These observations are compared to the data of the surface detector stations of
the Observatory, which provide well-calibrated information on the cosmic-ray
energies and arrival directions. The response of the radio stations in the 30
to 80 MHz regime has been thoroughly calibrated to enable the reconstruction of
the incoming electric field. For the latter, the energy deposit per area is
determined from the radio pulses at each observer position and is interpolated
using a two-dimensional function that takes into account signal asymmetries due
to interference between the geomagnetic and charge-excess emission components.
The spatial integral over the signal distribution gives a direct measurement of
the energy transferred from the primary cosmic ray into radio emission in the
AERA frequency range. We measure 15.8 MeV of radiation energy for a 1 EeV air
shower arriving perpendicularly to the geomagnetic field. This radiation energy
-- corrected for geometrical effects -- is used as a cosmic-ray energy
estimator. Performing an absolute energy calibration against the
surface-detector information, we observe that this radio-energy estimator
scales quadratically with the cosmic-ray energy as expected for coherent
emission. We find an energy resolution of the radio reconstruction of 22% for
the data set and 17% for a high-quality subset containing only events with at
least five radio stations with signal.
The Cherenkov Telescope Array (CTA) is the the next generation facility of
imaging atmospheric Cherenkov telescopes; two sites will cover both
hemispheres. CTA will reach unprecedented sensitivity, energy and angular
resolution in very-high-energy gamma-ray astronomy. Each CTA array will include
four Large Size Telescopes (LSTs), designed to cover the low-energy range of
the CTA sensitivity ($\sim$20 GeV to 200 GeV). In the baseline LST design, the
focal-plane camera will be instrumented with 265 photodetector clusters; each
will include seven photomultiplier tubes (PMTs), with an entrance window of 1.5
inches in diameter. The PMT design is based on mature and reliable technology.
Recently, silicon photomultipliers (SiPMs) are emerging as a competitor.
Currently, SiPMs have advantages (e.g. lower operating voltage and tolerance to
high illumination levels) and disadvantages (e.g. higher capacitance and cross
talk rates), but this technology is still young and rapidly evolving. SiPM
technology has a strong potential to become superior to the PMT one in terms of
photon detection efficiency and price per square mm of detector area. While the
advantage of SiPMs has been proven for high-density, small size cameras, it is
yet to be demonstrated for large area cameras such as the one of the LST. We
are working to develop a SiPM-based module for the LST camera, in view of a
possible camera upgrade. We will describe the solutions we are exploring in
order to balance a competitive performance with a minimal impact on the overall
LST camera design.