• Transmit Precoding and Receive Power Splitting for Harvested Power Maximization in MIMO SWIPT Systems(1805.00716)

May 2, 2018 cs.IT, math.IT
We consider the problem of maximizing the harvested power in Multiple Input Multiple Output (MIMO) Simultaneous Wireless Information and Power Transfer (SWIPT) systems with power splitting reception. Different from recently proposed designs, with our optimization problem formulation we target for the jointly optimal transmit precoding and receive uniform power splitting (UPS) ratio maximizing the harvested power, while ensuring that the quality-of-service requirement of the MIMO link is satisfied. We assume practical Radio-Frequency (RF) energy harvesting (EH) receive operation that results in a non-convex optimization problem for the design parameters, which we first formulate in an equivalent generalized convex problem that we then solve optimally. We also derive the globally optimal transmit precoding design for ideal reception. Furthermore, we present analytical bounds for the key variables of both considered problems along with tight high signal-to-noise ratio approximations for their optimal solutions. Two algorithms for the efficient computation of the globally optimal designs are outlined. The first requires solving a small number of non-linear equations, while the second is based on a two-dimensional search having linear complexity. Computer simulation results are presented validating the proposed analysis, providing key insights on various system parameters, and investigating the achievable EH gains over benchmark schemes.
• MIMO Underlay Cognitive Radio: Optimized Power Allocation, Effective Number of Transmit Antennas and Harvest-Transmit Tradeoff(1801.07209)

Jan. 22, 2018 cs.IT, math.IT
In this paper, the performance of an underlay multiple-input multiple-output (MIMO) cognitive radio system is analytically studied. In particular, the secondary transmitter operates in a spatial multiplexing transmission mode, while a zero-forcing detector is employed at the secondary receiver. Additionally, the secondary system is interfered by single-antenna primary users (PUs). To enhance the performance of secondary transmission, optimal power allocation is performed at the secondary transmitter with a constraint on the maximum allowable outage threshold specified by the PUs. Further, the effective number of secondary transmit antennas is specified based on the optimal power allocation for an arbitrary MIMO scale. Also, a lower bound on the ergodic channel capacity of the secondary system is derived in a closed-form expression. Afterwards, the scenario of a massive MIMO secondary system is thoroughly analyzed and evaluated, where the harvesting-enabled secondary transmission is studied. The optimal power allocation, the effective number of secondary transmit antennas, the efficient tradeoff between transmit-and-harvest secondary antennas, and the average channel capacity of the secondary system are analytically presented. Finally, extensive numerical and simulation results corroborate the effectiveness of our analysis, while some useful engineering insights are provided.
• Jointly Optimal Spatial Channel Assignment and Power Allocation for MIMO SWIPT Systems(1710.06746)

Oct. 18, 2017 cs.IT, math.IT
The joint design of spatial channel assignment and power allocation in Multiple Input Multiple Output (MIMO) systems capable of Simultaneous Wireless Information and Power Transfer (SWIPT) is studied. Assuming availability of channel state information at both communications ends, we maximize the harvested energy at the multi-antenna receiver, while satisfying a minimum information rate requirement for the MIMO link. We first derive the globally optimal eigenchannel assignment and power allocation design, and then present a practically motivated tight closed-form approximation for the optimal design parameters. Selected numerical results verify the validity of the optimal solution and provide useful insights on the proposed designs as well as the pareto-optimal rate-energy tradeoff.
• Position Aided Beam Alignment for Millimeter Wave Backhaul Systems with Large Phased Arrays(1701.03291)

Oct. 12, 2017 cs.IT, math.IT
Wireless backhaul communication has been recently realized with large antennas operating in the millimeter wave (mmWave) frequency band and implementing highly directional beamforming. In this paper, we focus on the alignment problem of narrow beams between fixed position network nodes in mmWave backhaul systems that are subject to small displacements due to wind flow or ground vibration. We consider nodes equipped with antenna arrays that are capable of performing only analog processing and communicate through wireless channels including a line-of-sight component. Aiming at minimizing the time needed to achieve beam alignment, we present an efficient method that capitalizes on the exchange of position information between the nodes to design their beamforming and combining vectors. Some numerical results on the outage probability with the proposed beam alignment method offer useful preliminary insights on the impact of some system and operation parameters.
• Harvested Power Maximization in QoS-Constrained MIMO SWIPT with Generic RF Harvesting Model(1710.04317)

Oct. 11, 2017 cs.IT, math.IT
We consider the problem of maximizing the harvested power in Multiple Input Multiple Output (MIMO) Simultaneous Wireless Information and Power Transfer (SWIPT) systems with power splitting reception. Different from recently proposed designs, we target with our novel problem formulation at the jointly optimal transmit precoding and receive uniform power splitting (UPS) ratio maximizing the harvested power, while ensuring that the Quality-of-Service (QoS) requirement of the MIMO link is satisfied. We assume generic practical Radio Frequency (RF) Energy Harvesting (EH) receive operation that results in a non-convex optimization problem for the design parameters, which we then solve optimally after formulating it in an equivalent generalized convex form. Our representative results including comparisons of achievable EH gains with benchmark schemes provide key insights on various system parameters.
• Secrecy Outage Analysis over Correlated Composite Nakagami-$m$/Gamma Fading Channels(1710.01192)

Oct. 3, 2017 cs.IT, math.IT
The secrecy outage performance of wireless communication systems operating over spatially correlated composite fading channels is analyzed in this paper. We adopt a multiplicative composite channel model for both the legitimate communication link and the link between the eavesdropper and the legitimate transmitter, consisting of Nakagami-$m$ distributed small-scale fading and shadowing (large-scale fading) modeled by the Gamma distribution. We consider the realistic case where small-scale fading between the links is independent, but shadowing is arbitrarily correlated, and present novel analytical expressions for the probability that the secrecy capacity falls below a target secrecy rate. The presented numerically evaluated results, verified by equivalent computer simulations, offer useful insights on the impact of shadowing correlation and composite fading parameters on the system's secrecy outage performance.
• Energy-aware Mode Selection for Throughput Maximization in RF-Powered D2D Communications(1709.01755)

Sept. 7, 2017 cs.IT, math.IT
Doubly-near-far problem in RF-powered networks can be mitigated by choosing appropriate device-to-device (D2D) communication mode and implementing energy-efficient information transfer (IT). In this work, we present a novel RF energy harvesting architecture where each transmitting-receiving user pair is allocated a disjoint channel for its communication which is fully powered by downlink energy transfer (ET) from hybrid access point (HAP). Considering that each user pair can select either D2D or cellular mode of communication, we propose an optimized transmission protocol controlled by the HAP that involves harvested energy-aware jointly optimal mode selection (MS) and time allocation (TA) for ET and IT to maximize the sum-throughput. Jointly global optimal solutions are derived by efficiently resolving the combinatorial issue with the help of optimal MS strategy for a given TA for ET. Closed-form expressions for the optimal TA in D2D and cellular modes are also derived to gain further analytical insights. Numerical results show that the joint optimal MS and TA, which significantly outperforms the benchmark schemes in terms of achievable RF-powered sum-throughput, is closely followed by the optimal TA scheme for D2D users. In fact, about $2/3$ fraction of the total user pairs prefer to follow the D2D mode for efficient RF-powered IT.
• Joint Design of Multi-Tap Analog Cancellation and Digital Beamforming for Reduced Complexity Full Duplex MIMO Systems(1705.05148)

May 15, 2017 cs.IT, math.IT
Incorporating full duplex operation in Multiple Input Multiple Output (MIMO) systems provides the potential of boosting throughput performance. However, the hardware complexity of the analog self-interference canceller scales with the number of transmit and receive antennas, thus exploiting the benefits of analog cancellation becomes impractical for full duplex MIMO transceivers. In this paper, we present a novel architecture for the analog canceller comprising of reduced number of taps (tap refers to a line of fixed delay and variable phase shifter and attenuator) and simple multiplexers for efficient signal routing among the transmit and receive radio frequency chains. In contrast to the available analog cancellation architectures, the values for each tap and the configuration of the multiplexers are jointly designed with the digital beamforming filters according to certain performance objectives. Focusing on a narrowband flat fading channel model as an example, we present a general optimization framework for the joint design of analog cancellation and digital beamforming. We also detail a particular optimization objective together with its derived solution for the latter architectural components. Representative computer simulation results demonstrate the superiority of the proposed low complexity full duplex MIMO system over lately available ones.
• On the Robustness of Coordinated Beamforming to Uncoordinated Interference and CSI Uncertainty(1701.06486)

Jan. 23, 2017 cs.IT, math.IT
As network deployments become denser, interference arises as a dominant performance degradation factor. To confront with this trend, Long Term Evolution (LTE) incorporated features aiming at enabling cooperation among different base stations, a technique termed as Coordinated Multi Point (CoMP). Recent field trial results and theoretical studies of the performance of CoMP schemes revealed, however, that their gains are not as high as initially expected, despite their large coordination overhead. In this paper, we review recent advanced Coordinated Beamforming (CB) schemes, a special family of CoMP that reduces the coordination overhead through a joint choice of transmit and receive linear filters. We focus on assessing their resilience to uncoordinated interference and Channel State Information (CSI) imperfections, which both severely limit the performance gains of all CoMP schemes. We present a simple yet encompassing system model that aims at incorporating different parameters of interest in the relative interference power and CSI errors, and then utilize it for the performance evaluation of the state-of-the-art in CB schemes. It is shown that blindly applying CB in all system scenarios can indeed be counter-productive.
• Secure communications with cooperative jamming: Optimal power allocation and secrecy outage analysis(1701.03383)

Jan. 12, 2017 cs.IT, math.IT
This paper studies the secrecy rate maximization problem of a secure wireless communication system, in the presence of multiple eavesdroppers. The security of the communication link is enhanced through cooperative jamming, with the help of multiple jammers. First, a feasibility condition is derived to achieve a positive secrecy rate at the destination. Then, we solve the original secrecy rate maximization problem, which is not convex in terms of power allocation at the jammers. To circumvent this non-convexity, the achievable secrecy rate is approximated for a given power allocation at the jammers and the approximated problem is formulated into a geometric programming one. Based on this approximation, an iterative algorithm has been developed to obtain the optimal power allocation at the jammers. Next, we provide a bisection approach, based on one-dimensional search, to validate the optimality of the proposed algorithm. In addition, by assuming Rayleigh fading, the secrecy outage probability (SOP) of the proposed cooperative jamming scheme is analyzed. More specifically, a single-integral form expression for SOP is derived for the most general case as well as a closed-form expression for the special case of two cooperative jammers and one eavesdropper. Simulation results have been provided to validate the convergence and the optimality of the proposed algorithm as well as the theoretical derivations of the presented SOP analysis.
• Low Complexity Channel Estimation for Millimeter Wave Systems with Hybrid A/D Antenna Processing(1610.00118)

Oct. 1, 2016 cs.IT, math.IT
The availability of large bandwidth at millimeter wave (mmWave) frequencies is one of the major factors that rendered very high frequencies a promising candidate enabler for fifth generation (5G) mobile communication networks. To confront with the intrinsic characteristics of signal propagation at frequencies of tens of GHz and being able to achieve data rates of the order of gigabits per second, mmWave systems are expected to employ large antenna arrays that implement highly directional beamforming. In this paper, we consider mmWave wireless systems comprising of nodes equipped with large antenna arrays and being capable of performing hybrid analog and digital (A/D) processing. Intending at realizing channel-aware transmit and receive beamforming, we focus on designing low complexity compressed sensing channel estimation. In particular, by adopting a temporally correlated mmWave channel model, we present two compressed sensing algorithms that exploit the temporal correlation to reduce the complexity of sparse channel estimation, one being greedy and the other one being iterative. Our representative performance evaluation results offer useful insights on the interplay among some system and operation parameters, and the accuracy of channel estimation.
• Simultaneous Spectrum Sensing and Data Reception for Cognitive Spatial Multiplexing Distributed Systems(1609.07711)

Sept. 25, 2016 cs.IT, math.IT
A multi-user cognitive (secondary) radio system is considered, where the spatial multiplexing mode of operation is implemented amongst the nodes, under the presence of multiple primary transmissions. The secondary receiver carries out minimum mean-squared error (MMSE) detection to effectively decode the secondary data streams, while it performs spectrum sensing at the remaining signal to capture the presence of primary activity or not. New analytical closed-form expressions regarding some important system measures are obtained, namely, the outage and detection probabilities; the transmission power of the secondary nodes; the probability of unexpected interference at the primary nodes; {\color{blue}and the detection efficiency with the aid of the area under the receive operating characteristics curve}. The realistic scenarios of channel fading time variation and channel estimation errors are encountered for the derived results. Finally, the enclosed numerical results verify the accuracy of the proposed framework, while some useful engineering insights are also revealed, such as the key role of the detection accuracy to the overall performance and the impact of transmission power from the secondary nodes to the primary system.
• Green Cognitive Relaying: Opportunistically Switching Between Data Transmission and Energy Harvesting(1507.06396)

June 9, 2016 cs.IT, math.IT
Energy efficiency has become an encouragement, and more than this, a requisite for the design of next-generation wireless communications standards. In current work, a dual-hop cognitive (secondary) relaying system is considered, incorporating multiple amplify-and-forward relays, a rather cost-effective solution. First, the secondary relays sense the wireless channel, scanning for a primary network activity, and then convey their reports to a secondary base station (SBS). Afterwards, the SBS, based on these reports and its own estimation, decides cooperatively the presence of primary transmission or not. In the former scenario, all the secondary nodes start to harvest energy from the transmission of primary node(s). In the latter scenario, the system initiates secondary communication via a best relay selection policy. Performance evaluation of this system is thoroughly investigated, by assuming realistic channel conditions, i.e., non-identical link-distances, Rayleigh fading, and outdated channel estimation. The detection and outage probabilities as well as the average harvested energy are derived as new closed-form expressions. In addition, an energy efficiency optimization problem is analytically formulated and solved, while a necessary condition in terms of power consumption minimization for each secondary node is presented. From a green communications standpoint, it turns out that energy harvesting greatly enhances the resources of secondary nodes, especially when primary activity is densely present.
• Performance Analysis of $L$-Branch Scan-and-Wait Combining (SWC) over Arbitrarily Correlated Nakagami-$m$ Fading Channels(1606.01759)

June 6, 2016 cs.IT, math.IT
The performance of $L$-branch scan-and-wait combining (SWC) reception systems over arbitrarily correlated and not necessarily identically distributed Nakagami-$m$ fading channels is analyzed and evaluated. Firstly, a fast convergent infinite series representation for the SWC output signal-noise ratio (SNR) is presented. This expression is used to obtain analytical expressions in the form of infinite series for the average error probability performance of various modulation schemes for integer values of $m$ as well as the average number of paths estimation and average waiting time (AWT) of $L$-branch SWC receivers for arbitrary values of $m$. The numerically obtained results have shown that the performance expressions converge very fast to their exact analytical values. It was found that the convergence speed depends on the correlation and operating SNR values as well as the Nakagami $m$-parameter. In addition to the analytical results, complementary computer simulated performance evaluation results have been obtained by means of Monte Carlo error counting techniques. The match between these two sets of results has verified the accuracy of the proposed mathematical analysis. Furthermore, it is revealed that, at the expense of a negligible AWT, the average error probability performance of SWC receivers is always superior to that of switched-and-examine combining receivers and in certain cases to that of maximal-ratio combining receivers.
• User Scheduling and Optimal Power Allocation for Full-Duplex Cellular Networks(1605.05137)

May 17, 2016 cs.IT, math.IT
The problem of user scheduling and power allocation in full-duplex (FD) cellular networks is considered, where a FD base station communicates simultaneously with one half-duplex (HD) user on each downlink and uplink channel. First, we propose low complexity user scheduling algorithms aiming at maximizing the sum rate of the considered FD system. Second, we derive the optimal power allocation for the two communication links, which is then exploited to introduce efficient metrics for FD/HD mode switching in the scheduling procedure, in order to further boost the system rate performance. We analyze the average sum rate of the proposed algorithms over Rayleigh fading and provide closed-form expressions. Our representative performance evaluation results for the algorithms with and without optimal power control offer useful insights on the interplay among rate, transmit powers, self-interference (SI) cancellation capability, and available number of users in the system.
• Performance Evaluation of User Scheduling for Full-Duplex Small Cells in Ultra-Dense Networks(1604.05979)

April 20, 2016 cs.IT, math.IT
Full-duplex (FD) communication is an emerging technology that can potentially double the throughput of cellular networks. Preliminary studies in single-cell or small FD network deployments have revealed promising rate gains using self-interference cancellation (SIC) techniques and receive processing. Nevertheless, the system-level performance gains of FD small cells in ultra-dense networks (UDNs) have not been fully investigated yet. In this paper, we evaluate the performance of resource allocation in ultra-dense FD small-cell networks using spatial stochastic models for the network layout and 3GPP channel models. More specifically, we consider various UDN scenarios and assess the performance of different low-complexity user-scheduling schemes and power allocation between uplink and downlink. We also provide useful insights into the effect of the SIC capability on the network throughput.
• Advanced Coordinated Beamforming for the Downlink of Future LTE Cellular Networks(1604.04592)

April 15, 2016 cs.IT, math.IT
Modern cellular networks in traditional frequency bands are notoriously interference-limited especially in urban areas, where base stations are deployed in close proximity to one another. The latest releases of Long Term Evolution (LTE) incorporate features for coordinating downlink transmissions as an efficient means of managing interference. Recent field trial results and theoretical studies of the performance of joint transmission (JT) coordinated multi-point (CoMP) schemes revealed, however, that their gains are not as high as initially expected, despite the large coordination overhead. These schemes are known to be very sensitive to defects in synchronization or information exchange between coordinating bases stations as well as uncoordinated interference. In this article, we review recent advanced coordinated beamforming (CB) schemes as alternatives, requiring less overhead than JT CoMP while achieving good performance in realistic conditions. By stipulating that, in certain LTE scenarios of increasing interest, uncoordinated interference constitutes a major factor in the performance of CoMP techniques at large, we hereby assess the resilience of the state-of-the-art CB to uncoordinated interference. We also describe how these techniques can leverage the latest specifications of current cellular networks, and how they may perform when we consider standardized feedback and coordination. This allows us to identify some key roadblocks and research directions to address as LTE evolves towards the future of mobile communications.
• Massive MIMO Relaying with Hybrid Processing(1511.05834)

March 1, 2016 cs.IT, math.IT
Massive multiple-input multiple-output (MIMO) relaying is a promising technological paradigm which can offer high spectral efficiency and substantially improved coverage. Yet, these configurations face some formidable challenges in terms of digital signal processing (DSP) power consumption and circuitry complexity, since the number of radio frequency (RF) chains may scale with the number of antennas at the relay station. In this paper, we advocate that performing a portion of the power-intensive DSP in the analog domain, using simple phase shifters and with a reduced number of RF paths, can address these challenges. In particular, we consider a multipair amplify-and-forward (AF) relay system with maximum ratio combining/transmission (MRC/MRT) and we determine the asymptotic spectral efficiency for this hybrid analog/digital architecture. After that, we extend our analytical results to account for heavily quantized analog phase shifters and show that the performance loss with 2 quantization bits is only 10%.
• Apply Artificial Noise To Secure Fading Relay Networks: A SER-Based Approach(1506.07491)

Jan. 31, 2016 cs.IT, math.IT, math.PR
We apply the concept of artificial and controlled interference in a triangular relay network with an untrusted relay aiming at enhancing the wireless communication secrecy between the source and the destination node. In order to shield the square quadrature amplitude modulated (QAM) signals transmitted from the source node to the relay, the destination node designs and transmits artificial noise (AN) symbols to jam the relay reception. The objective of our considered AN design is to degrade the error probability performance at the untrusted relay, for different types of channel state information (CSI) at the destination. By considering perfect knowledge of the instantaneous CSI of the source-to-relay and relay-to-destination links, we first present an analytical expression for the symbol error rate (SER) performance at the relay. Based on the assumption of an average power constraint at the destination node, we then derive the optimal phase and power distribution of the AN that maximizes the SER at the relay. Furthermore, we obtain the optimal AN design for the case where only statistical CSI is available at the destination node. For both cases, our study reveals that the Gaussian distribution is generally not optimal to generate AN symbols. In particular, the conducted numerical results show that the Gaussian distributed AN is far from optimal. The presented AN design takes into account practical parameters for the communication links, such as QAM signaling and maximum likelihood decoding.
• Bit Error Rate Analysis of Cooperative Beamforming for Transmitting Individual Data Streams(1510.08259)

Oct. 28, 2015 cs.IT, math.IT
Cooperative beamforming (CB) has been proposed as a special case of coordinated multi-point techniques in wireless communications. In wireless sensor networks, CB can enable low power communication by allowing a collection of sensor nodes to transmit data simultaneously to a distant fusion center in one hop. Besides the traditional CB approach where all nodes need to share and transmit the same data, a more recent technique allows each node to transmit its own data while still achieving the benefits of cooperation. However, the intricacies of varying beamforming gains in the direct sequence spread spectrum with binary frequency shift keying multiple access scheme used in this context need to be taken into account when evaluating the performance of this beamforming technique. In this paper, we take the first step towards a more comprehensive understanding of this individual-data CB technique by proposing a best suited decoding scheme and analyzing its bit error rate (BER) performance over an additive white Gaussian noise channel. Through analytical expressions and simulation results BER curves are drawn and the achieved performance improvement offered by the CB gain is quantified.
• Maximal Ratio Transmission in Wireless Poisson Networks under Spatially Correlated Fading Channels(1508.06440)

Aug. 27, 2015 cs.IT, math.IT
The downlink of a wireless network where multi-antenna base stations (BSs) communicate with single-antenna mobile stations (MSs) using maximal ratio transmission (MRT) is considered here. The locations of BSs are modeled by a homogeneous Poisson point process (PPP) and the channel gains between the multiple antennas of each BS and the single antenna of each MS are modeled as spatially arbitrarily correlated Rayleigh random variables. We first present novel closed-form expressions for the distribution of the power of the interference resulting from the coexistence of one intended and one unintended MRT over the considered correlated fading channels. The derived expressions are then used to obtain closed-form expressions for the success probability and area spectral efficiency of the wireless communication network under investigation. Simulation results corroborate the validity of the presented expressions. A key result of this work is that the effect of spatial correlation on the network throughput may be contrasting depending on the density of BSs, the signal-to-interference-plus-noise ratio (SINR) level, and the background noise power.
• Precoding for Multiuser MIMO Systems with Single-Fed Parasitic Antenna Arrays(1409.0682)

Dec. 15, 2014 cs.IT, math.IT
Transmitter (TX) cooperation at various levels has been shown to increase the sum throughput of multiuser multiple-input multiple-output (MIMO) systems. In this paper we consider a K-user MIMO system where TXs have only global channel state knowledge. It has been theoretically shown that interference alignment (IA) achieves the K/2 degrees of freedom of this K-user MIMO interference channel. However, results on IA and all proposed transceiver techniques for this channel up to date, assume conventional antenna arrays at the transceivers with multiple radio-frequency (RF) chains, each connected to a different antenna element. To reduce the consequent hardware burden and power dissipation imposed by such arrays, we propose in this paper the utilization of compact single-RF electronically steerable parasitic (passive) array radiators (ESPARs) at the cooperating TXs. A signal model capable of capturing the characteristics of the considered antenna arrays is first described and then a general precoding design methodology for the tunable parasitic loads at the TXs' ESPARs is introduced. Specific precoding techniques and an indicative ESPAR design are presented for a 3-user 2x2 MIMO system with one ESPAR TX, and the obtained performance evaluation results show that the gains of TX cooperation are still feasible.
• A Reconfigurable Distributed Algorithm for K-user MIMO Interference Networks(1210.0891)

Feb. 26, 2013 cs.IT, math.IT
It is already well-known that interference alignment (IA) achieves the sum capacity of the K-user interference channel at the high interference regime. On the other hand, it is intuitively clear that when the interference levels are very low, a sum-rate scaling of K (as opposed to K/2 for IA) should be accessed at high signal-to-noise ratio values by simple ("myopic") single-link multiple-input multiple-output (MIMO) techniques such as waterfilling. Recent results have indicated that in certain low-to-moderate interference cases, treating interference as noise may in fact be preferable. In this paper, we present a distributed iterative algorithm for K-user MIMO interference networks which attempts to adjust itself to the interference regime at hand, in the above sense, as well as to the channel conditions. The proposed algorithm combines the system-wide mean squared error minimization with the waterfilling solution to adjust to the interference levels and channel conditions and maximize accordingly each user's transmission rate. Sum-rate computer simulations for the proposed algorithm over Ricean fading channels show that, in the interference-limited regime, the proposed algorithm reconfigures itself in order to achieve the IA scaling whereas, in the low-to-moderate interference regime, it leads itself towards interference-myopic MIMO transmissions.
• A Comparative Study of Relaying Schemes with Decode-and-Forward over Nakagami-m Fading Channels(1104.0118)

April 1, 2011 cs.IT, math.IT, cs.PF
Utilizing relaying techniques to improve performance of wireless systems is a promising avenue. However, it is crucial to understand what type of relaying schemes should be used for achieving different performance objectives under realistic fading conditions. In this paper, we present a general framework for modelling and evaluating the performance of relaying schemes based on the decode-and-forward (DF) protocol over independent and not necessarily identically distributed (INID) Nakagami-m fading channels. In particular, we present closed-form expressions for the statistics of the instantaneous output signal-to-noise ratio of four significant relaying schemes with DF; two based on repetitive transmission and the other two based on relay selection (RS). These expressions are then used to obtain closed-form expressions for the outage probability and the average symbol error probability for several modulations of all considered relaying schemes over INID Nakagami-m fading. Importantly, it is shown that when the channel state information for RS is perfect, RS-based transmission schemes always outperform repetitive ones. Furthermore, when the direct link between the source and the destination nodes is sufficiently strong, relaying may not result in any gains and in this case it should be switched-off.