-
We report a measurement of time-dependent $CP$ violation parameters in ${B^0
\to K_S^0 \eta \gamma}$ decays. The study is based on a data sample, containing
${772 \times 10^6 B\bar{B}}$ pairs, that was collected at the $\Upsilon(4S)$
resonance with the Belle detector at the KEKB asymmetric-energy $e^+ e^-$
collider. We obtain the $CP$ violation parameters of ${{\cal S} = -1.32 \pm
0.77 {\rm (stat.)} \pm 0.36{\rm (syst.)}}$ and ${{\cal A} = -0.48 \pm 0.41 {\rm
(stat.)} \pm 0.07{\rm (syst.)}}$ for the invariant mass of the $K_S^0 \eta$
system up to 2.1 GeV/$c^2$.
-
We present our current best estimate of the plausible observing scenarios for
the Advanced LIGO, Advanced Virgo and KAGRA gravitational-wave detectors over
the next several years, with the intention of providing information to
facilitate planning for multi-messenger astronomy with gravitational waves. We
estimate the sensitivity of the network to transient gravitational-wave signals
for the third (O3), fourth (O4) and fifth observing (O5) runs, including the
planned upgrades of the Advanced LIGO and Advanced Virgo detectors. We study
the capability of the network to determine the sky location of the source for
gravitational-wave signals from the inspiral of binary systems of compact
objects, that is BNS, NSBH, and BBH systems. The ability to localize the
sources is given as a sky-area probability, luminosity distance, and comoving
volume. The median sky localization area (90\% credible region) is expected to
be a few hundreds of square degrees for all types of binary systems during O3
with the Advanced LIGO and Virgo (HLV) network. The median sky localization
area will improve to a few tens of square degrees during O4 with the Advanced
LIGO, Virgo, and KAGRA (HLVK) network. We evaluate sensitivity and localization
expectations for unmodeled signal searches, including the search for
intermediate mass black hole binary mergers.
-
KAGRA is a 3-km interferometric gravitational wave telescope located in the
Kamioka mine in Japan. It is the first km-class gravitational wave telescope
constructed underground to reduce seismic noise, and the first km-class
telescope to use cryogenic cooling of test masses to reduce thermal noise. The
construction of the infrastructure to house the interferometer in the tunnel,
and the initial phase operation of the interferometer with a simple 3-km
Michelson configuration have been completed. The first cryogenic operation is
expected in 2018, and the observing runs with a full interferometer are
expected in 2020s. The basic interferometer configuration and the current
status of KAGRA are described.
-
We present a measurement of the Michel parameters of the $\tau$ lepton,
$\bar{\eta}$ and $\xi\kappa$, in the radiative leptonic decay $\tau^-
\rightarrow \ell^- \nu_{\tau} \bar{\nu}_{\ell} \gamma$ using
711~f$\mathrm{b}^{-1}$ of collision data collected with the Belle detector at
the KEKB $e^+e^-$ collider. The Michel parameters are measured in an unbinned
maximum likelihood fit to the kinematic distribution of
$e^+e^-\rightarrow\tau^+\tau^-\rightarrow (\pi^+\pi^0
\bar{\nu}_\tau)(\ell^-\nu_{\tau}\bar{\nu}_{\ell}\gamma)$ $(\ell=e$ or $\mu)$.
The measured values of the Michel parameters are $\bar{\eta} = -1.3 \pm 1.5 \pm
0.8$ and $\xi\kappa = 0.5 \pm 0.4 \pm 0.2$, where the first error is
statistical and the second is systematic. This is the first measurement of
these parameters. These results are consistent with the Standard Model
predictions within their uncertainties and constrain the coupling constants of
the generalized weak interaction.
-
The precise determination of the CKM matrix element $\left| V_{cb}\right|$ is
important for carrying out tests of the flavour sector of the Standard Model.
In this article we present a preliminary analysis of the $\bar B^0 \to D^{*\,+}
\, \ell^- \, \bar \nu_\ell$ decay mode and its charge conjugate, selected in
events that contain a fully reconstructed $B$-meson, using 772 million $e^+ \,
e^- \to \Upsilon(4S) \to B \bar B$ events recorded by the Belle detector at
KEKB. Unfolded differential decay rates of four kinematic variables fully
describing the $\bar B^0 \to D^{*\,+} \, \ell^- \, \bar \nu_\ell$ decay in the
$B$-meson rest frame are presented. We measure the total branching fraction
$\mathcal{B}( \bar B^0 \to D^{*\,+} \, \ell^- \, \bar \nu_\ell ) = \left(4.95
\pm 0.11 \pm 0.22 \right) \times 10^{-2}$, where the errors are statistical and
systematic respectively. The value of $\left|V_{cb} \right|$ is determined to
be $\left( 37.4 \pm 1.3 \right) \times 10^{-3}$. Both results are in good
agreement with current world averages.
-
We report the first observation of the polarization of
$\Lambda/\bar{\Lambda}$ hyperons transverse to its production plane in $e^+e^-$
annihilation. We observe a significant polarization that rises with the
fractional energy carried by the hyperon as well as its transverse momentum. To
define the production plane, we use the direction of the hyperon momentum
together with either the thrust axis in the event or the momentum vector of a
hadron in the opposite hemisphere. Furthermore, we investigate the
contributions to the hyperon polarization from the feed-down from
$\Sigma^0/\bar{\Sigma}^0$ and $\Lambda_c^{\pm}$ decays. This measurement uses a
dataset of 800.4\~fb$^{-1}$ collected by the Belle experiment at or near a
center-of-mass energy of 10.58 GeV.
-
We present the first measurement of the Michel parameters $\bar{\eta}$ and
$\xi\kappa$ in the radiative leptonic decay of the $\tau$ lepton using 703
f$\mathrm{b}^{-1}$ of data collected with the Belle detector at the KEKB
$e^+e^-$ collider. The Michel parameters are measured by an unbinned maximum
likelihood fit to the kinematic information of
$e^+e^-\rightarrow\tau^+\tau^-\rightarrow (\pi^+\pi^0
\bar{\nu})(l^-\nu\bar{\nu}\gamma)$ $(l=e$ or $\mu)$. The preliminary values of
the measured Michel parameters are $\bar{\eta} = -2.0 \pm 1.5 \pm 0.8$ and
$\xi\kappa = 0.6 \pm 0.4 \pm 0.2$, where the first error is statistical and the
second is systematic.
-
We report a measurement of the time-integrated $CP$ asymmetry in the neutral
charm meson decay $D^0 \to K^0_S K^0_S$ using 921~fb$^{-1}$ data collected at
the $\Upsilon(4S)$ and $\Upsilon(5S)$ resonances with the Belle detector at the
KEKB asymmetric-energy $e^+e^-$ collider. The observed asymmetry is $$
A_{CP}(D^0 \to K^0_S K^0_S) = (-0.02 \pm 1.53 \pm 0.17) \%, $$ where the first
uncertainty is statistical and the second systematic. This latter uncertainty
is dominated by the error of the normalisation channel. The result is
consistent with Standard Model expectations and improves the uncertainty with
respect to previous measurement of this quantity by more than a factor of
three.
-
We report a search for $B^{0}\to \eta \eta $ with a data sample corresponding
to an integrated luminosity of $698 \,{\rm fb}^{-1}$ containing $753 \times
10^{6}$ $B\bar{B}$ pairs collected at the $\Upsilon(4S)$ resonance with the
Belle detector at the KEKB asymmetric-energy $e^{+}e^{-}$ collider. The
branching fraction is measured to be $\mathcal{B}(B^{0} \to \eta \eta ) =
(7.6^{+2.7 +1.4}_{-2.3 -1.6}) \times 10^{-7}$ at the level of 3.3 standard
deviations above zero, which provides the first evidence for the decay $B^{0}
\to \eta \eta$.
-
We report the first measurement of the $\tau$ lepton polarization in the
decay ${\bar B} \rightarrow D^* \tau^- {\bar\nu_{\tau}}$ as well as a new
measurement of the ratio of the branching fractions $R(D^{*}) =
\mathcal{B}({\bar B} \rightarrow D^* \tau^- {\bar\nu_{\tau}}) /
\mathcal{B}({\bar B} \rightarrow D^* \ell^- {\bar\nu_{\ell}})$, where $\ell^-$
denotes an electron or a muon, with the decays $\tau^- \rightarrow \pi^-
\nu_{\tau}$ and $\tau^- \rightarrow \rho^- \nu_{\tau}$. We use the full data
sample of $772 \times 10^6$ $B{\bar B}$ pairs accumulated with the Belle
detector at the KEKB electron-positron collider. Our preliminary results,
$R(D^*) = 0.276 \pm 0.034{\rm (stat.)} ^{+0.029} _{-0.026}{\rm (syst.)}$ and
$P_{\tau} = -0.44 \pm 0.47 {\rm (stat.)} ^{+0.20} _{-0.17} {\rm (syst.)}$, are
consistent with the theoretical predictions of the Standard Model within $0.6$
standard deviation.
-
We report a study of radiative decays of \chi_{bJ}(1P)(J=0,1,2) mesons into
74 hadronic final states comprising charged and neutral pions, kaons, protons;
out of these, 41 modes are observed with at least 5 standard deviation
significance. Our measurements not only improve the previous measurements by
the CLEO Collaboration but also lead to first observations in many new modes.
The large sample allows us to probe the total decay width of the \chi_{b0}(1P).
In the absence of a statistically significant result, a 90% confidence-level
upper limit is set on the width at \Gamma_{total}< 2.4 MeV. Our results are
based on 24.7 fb^{-1} of e+e- collision data recorded by the Belle detector at
the \Upsilon(2S) resonance, corresponding to (157.8\pm3.6)\times10^6
\Upsilon(2S) decays.
-
We present a measurement of angular observables, $P_4'$, $P_5'$, $P_6'$,
$P_8'$, in the decay $B^0 \to K^\ast(892)^0 \ell^+ \ell^-$, where
$\ell^+\ell^-$ is either $e^+e^-$ or $\mu^+\mu^-$. The analysis is performed on
a data sample corresponding to an integrated luminosity of
$711~\mathrm{fb}^{-1}$ containing $772\times 10^{6}$ $B\bar B$ pairs, collected
at the $\Upsilon(4S)$ resonance with the Belle detector at the
asymmetric-energy $e^+e^-$ collider KEKB. Four angular observables,
$P_{4,5,6,8}'$ are extracted in five bins of the invariant mass squared of the
lepton system, $q^2$. We compare our results for $P_{4,5,6,8}'$ with Standard
Model predictions including the $q^2$ region in which the LHCb collaboration
reported the so-called $P_5'$ anomaly.
-
We report a measurement of ratio ${\cal R}(D^*) = {\cal B}(\bar{B}^0
\rightarrow D^{*+} \tau^- \bar{\nu}_{\tau})/{\cal B}(\bar{B}^0 \rightarrow
D^{*+} \ell^- \bar{\nu}_{\ell})$, where $\ell$ denotes an electron or a muon.
The results are based on a data sample containing $772\times10^6$ $B\bar{B}$
pairs recorded at the $\Upsilon(4S)$ resonance with the Belle detector at the
KEKB $e^+ e^-$ collider. We select a sample of $B^0 \bar{B}^0$ pairs by
reconstructing both $B$ mesons in semileptonic decays to $D^{*\mp} \ell^{\pm}$.
We measure ${\cal R}(D^*)= 0.302 \pm 0.030({\rm stat)} \pm 0.011({\rm syst)}$,
which is within $1.6 \sigma$ of the Standard Model theoretical expectation,
where $\sigma$ is the standard deviation including systematic uncertainties.
-
Quantum feedback is a technique for measuring a qubit and applying
appropriate feedback depending on the measurement results. Here, we propose a
new on-chip quantum feedback method where the measurement-result information is
not taken from the chip to the outside of a dilution refrigerator. This can be
done by using a selective qubit-energy shift induced by measurement apparatus.
We demonstrate on-chip quantum feedback and succeed in the rapid initialization
of a qubit by flipping the qubit state only when we detect the ground state of
the qubit. The feedback loop of our quantum feedback method closed on a chip,
and so the operating time needed to control a qubit is of the order of 10 ns.
This operating time is shorter than with the convectional off-chip feedback
method. Our on-chip quantum feedback technique opens many possibilities such as
an application to quantum information processing and providing an understanding
of the foundation of thermodynamics for quantum systems.
-
We present an extraction of azimuthal correlations between two pairs of
charged pions detected in opposite jets from electron-positron annihilation.
These correlations may arise from the dependence of the di-pion fragmentation
on the polarization of the parent quark in the process $e^+e^- \rightarrow q
\bar{q}$. Due to the correlation of the quark polarizations, the cross-section
of di-pion pair production, in which the pion pairs are detected in opposite
jets in a dijet event, exhibits a modulation in the azimuthal angles of the
planes containing the hadron pairs with respect to the production plane. The
measurement of this modulation allows access to combinations of fragmentation
functions that are sensitive to the quark's transverse polarization and
helicity. Within our uncertainties we do not observe a significant signal from
the previously unmeasured helicity dependent fragmentation function
$G_1^\perp$. This measurement uses a dataset of 938~fb$^{-1}$ collected by the
Belle experiment at or near $\sqrt{s}\approx10.58$ GeV.
-
We derive an analytical expression for extracting the gravitational waveforms
at null infinity using the Weyl scalar $\psi_4$ measured at a finite radius.
Our expression is based on a series solution in orders of 1/r to the equations
for gravitational perturbations about a spinning black hole. We compute this
expression to order $1/r^2$ and include the spin parameter $a$ of the Kerr
background. We test the accuracy of this extraction procedure by measuring the
waveform for a merging black-hole binary at ten different extraction radii (in
the range r/M=75-190) and for three different resolutions in the convergence
regime. We find that the extraction formula provides a set of values for the
radiated energy and momenta that at finite extraction radii converges towards
the expected values with increasing resolution, which is not the case for the
`raw' waveform at finite radius. We also examine the phase and amplitude errors
in the waveform as a function of observer location and again observe the
benefits of using our extraction formula. The leading corrections to the phase
are ${\cal O}(1/r)$ and to the amplitude are ${\cal O}(1/r^2)$. This method
provides a simple and practical way of estimating the waveform at infinity, and
may be especially useful for scenarios such as well separated binaries, where
the radiation zone is far from the sources, that would otherwise require
extended simulation grids in order to extrapolate the `raw' waveform to
infinity. Thus this method saves important computational resources and provides
an estimate of errors.
-
We report a measurement of the amplitude ratio $r_S$ of $B^0 \to D^0K^{*0}$
and $B^0 \to \bar{D^0}K^{*0}$ decays with a model-independent Dalitz plot
analysis using $D\to K_S^0\pi^+\pi^-$ decays. Using the full data sample of
$772\times10^6$ $B\bar{B}$ pairs collected at the $\Upsilon(4S)$ resonance with
the Belle detector at KEKB accelerator the upper limit is $r_S < 0.87$ at the
68 % confidence level. This result is the first measurement of $r_S$ with a
model-independent Dalitz analysis, and is consistent with results from other
analyses. The value of $r_S$ indicates the sensitivity of the decay to $\phi_3$
because the statistical uncertainty is proportional to $1/r_S$. The $r_S$
result is obtained from observables ($x_\pm$, $y_\pm$) \begin{eqnarray} x_- &=&
+0.4 ^{+1.0 +0.0}_{-0.6 -0.1} \pm0.0 \\ y_- &=& -0.6 ^{+0.8 +0.1}_{-1.0 -0.0}
\pm0.1 \\ x_+ &=& +0.1 ^{+0.7 +0.0}_{-0.4 -0.1} \pm0.1 \\ y_+ &=& +0.3 ^{+0.5
+0.0}_{-0.8 -0.1} \pm0.1 \\ , \end{eqnarray} where $x_\pm = r_S \cos(\delta_S
\pm \phi_3)$, $y_\pm = r_S \sin(\delta_S \pm \phi_3)$ and $\phi_3 (\delta_S)$
are the weak (strong) phase difference between $B^0 \to D^0K^{*0}$ and $B^0 \to
\bar{D^0}K^{*0}$. The first uncertainty is statistical, the second is the
experimental systematic and the third is the systematic due to the
uncertainties on $c_i$ and $s_i$ parameters measured by CLEO.
-
We report a measurement of the branching fraction of $B^+ \to \tau^+
\nu_\tau$ decays using a data sample of $772 \times 10^6 B \bar{B}$ pairs,
collected at the $\Upsilon(4S)$ resonance with the Belle detector at the KEKB
asymmetric-energy $e^+e^-$ collider. We reconstruct the accompanying $B$ meson
in a semileptonic decay and detect the $B^+ \to \tau^+ \nu_\tau$ candidate in
the recoiling event. We obtain a branching fraction of ${\cal B}(B^+ \to \tau^+
\nu_\tau) = [1.25 \pm 0.28 ({\rm stat.}) \pm 0.27({\rm syst.})] \times
10^{-4}$. This result is in good agreement with previous measurements and the
expectation from calculations based on the Standard Model.
-
The Numerical INJection Analysis (NINJA) project is a collaborative effort
between members of the numerical relativity and gravitational-wave astrophysics
communities. The purpose of NINJA is to study the ability to detect
gravitational waves emitted from merging binary black holes and recover their
parameters with next-generation gravitational-wave observatories. We report
here on the results of the second NINJA project, NINJA-2, which employs 60
complete binary black hole hybrid waveforms consisting of a numerical portion
modelling the late inspiral, merger, and ringdown stitched to a post-Newtonian
portion modelling the early inspiral. In a "blind injection challenge" similar
to that conducted in recent LIGO and Virgo science runs, we added 7 hybrid
waveforms to two months of data recolored to predictions of Advanced LIGO and
Advanced Virgo sensitivity curves during their first observing runs. The
resulting data was analyzed by gravitational-wave detection algorithms and 6 of
the waveforms were recovered with false alarm rates smaller than 1 in a
thousand years. Parameter estimation algorithms were run on each of these
waveforms to explore the ability to constrain the masses, component angular
momenta and sky position of these waveforms. We also perform a large-scale
monte-carlo study to assess the ability to recover each of the 60 hybrid
waveforms with early Advanced LIGO and Advanced Virgo sensitivity curves. Our
results predict that early Advanced LIGO and Advanced Virgo will have a
volume-weighted average sensitive distance of 300Mpc (1Gpc) for
$10M_{\odot}+10M_{\odot}$ ($50M_{\odot}+50M_{\odot}$) binary black hole
coalescences. We demonstrate that neglecting the component angular momenta in
the waveform models used in matched-filtering will result in a reduction in
sensitivity for systems with large component angular momenta. [Abstract
abridged for ArXiv, full version in PDF]
-
The Belle detector at the KEKB electron-positron collider has collected
almost 1 billion Y(4S) events in its decade of operation. Super-KEKB, an
upgrade of KEKB is under construction, to increase the luminosity by two orders
of magnitude during a three-year shutdown, with an ultimate goal of 8E35 /cm^2
/s luminosity. To exploit the increased luminosity, an upgrade of the Belle
detector has been proposed. A new international collaboration Belle-II, is
being formed. The Technical Design Report presents physics motivation, basic
methods of the accelerator upgrade, as well as key improvements of the
detector.
-
We have controlled the measurement strength of the qubit readout process by
using a Josephson bifurcation amplifier (JBA : an AC-driven SQUID). The optimum
readout pulse changes the superposition state into an eigenstate. To clarify
how a sufficiently strong measurement causes a projection phenomenon, we have
studied the projection conditions in the JBA readout. We found that the
projection occurs above the pulse height at which visibility starts to appear.
Furthermore, the projection continues to occur as readout strength increases,
even though the visibility vanishes. This result helps us understanding the JBA
readout process.
-
The paper summarizes the parallel session B3 {\em Analytic approximations,
perturbation methods, and their applications} of the GR18 conference. The talks
in the session reported notably recent advances in black hole perturbations and
post-Newtonian approximations as applied to sources of gravitational waves.
-
We propose a qubit-qubit coupling scheme for superconducting flux quantum
bits (qubits), where a quantized Josephson junction resonator and microwave
irradiation are utilized. The junction is used as a tunable inductance
controlled by changing the bias current flowing through the junction, and thus
the circuit works as a tunable resonator. This enables us to make any qubits
interact with the resonator. Entanglement between two of many qubits whose
level splittings satisfy some conditions, is formed by microwave irradiation
causing a two-photon Rabi oscillation. Since the size of the resonator can be
as large as sub-millimeters and qubits interact with it via mutual inductance,
our scheme makes it possible to construct a quantum gate involving remote
qubits
-
We discuss the effect of quantum interference on transport through a quantum
dot system. We introduce an indirect coherent coupling parameter alpha, which
provides constructive/destructive interference in the transport current
depending on its phase and the magnetic flux. We estimate the current through
the quantum dot system using the non-equilibrium Green's function method as
well as the master equation method in the sequential tunneling regime. The
visibility of the Aharonov-Bohm oscillation is evaluated. For a large inter-dot
Coulomb interaction, the current is strongly suppressed by the quantum
interference effect, while the current is restored by applying an oscillating
resonance field with the frequency of twice the inter-dot tunneling energy.
-
In order to gain a better understanding of the origin of decoherence in
superconducting flux qubits, we have measured the magnetic field dependence of
the characteristic energy relaxation time ($T_1$) and echo phase relaxation
time ($T_2^{\rm echo}$) near the optimal operating point of a flux qubit. We
have measured $T_2^{\rm echo}$ by means of the phase cycling method. At the
optimal point, we found the relation $T_2^{\rm echo}\approx 2T_1$. This means
that the echo decay time is {\it limited by the energy relaxation} ($T_1$
process). Moving away from the optimal point, we observe a {\it linear}
increase of the phase relaxation rate ($1/T_{2}^{\rm echo}$) with the applied
external magnetic flux. This behavior can be well explained by the influence of
magnetic flux noise with a $1/f$ spectrum on the qubit.
We present our current best estimate of the plausible observing scenarios for the Advanced LIGO, Advanced Virgo and KAGRA gravitational-wave detectors over the next several years, with the intention of providing information to facilitate planning for multi-messenger astronomy with gravitational waves. We estimate the sensitivity of the network to transient gravitational-wave signals for the third (O3), fourth (O4) and fifth observing (O5) runs, including the planned upgrades of the Advanced LIGO and Advanced Virgo detectors. We study the capability of the network to determine the sky location of the source for gravitational-wave signals from the inspiral of binary systems of compact objects, that is BNS, NSBH, and BBH systems. The ability to localize the sources is given as a sky-area probability, luminosity distance, and comoving volume. The median sky localization area (90\% credible region) is expected to be a few hundreds of square degrees for all types of binary systems during O3 with the Advanced LIGO and Virgo (HLV) network. The median sky localization area will improve to a few tens of square degrees during O4 with the Advanced LIGO, Virgo, and KAGRA (HLVK) network. We evaluate sensitivity and localization expectations for unmodeled signal searches, including the search for intermediate mass black hole binary mergers.
The precise determination of the CKM matrix element $\left| V_{cb}\right|$ is important for carrying out tests of the flavour sector of the Standard Model. In this article we present a preliminary analysis of the $\bar B^0 \to D^{*\,+} \, \ell^- \, \bar \nu_\ell$ decay mode and its charge conjugate, selected in events that contain a fully reconstructed $B$-meson, using 772 million $e^+ \, e^- \to \Upsilon(4S) \to B \bar B$ events recorded by the Belle detector at KEKB. Unfolded differential decay rates of four kinematic variables fully describing the $\bar B^0 \to D^{*\,+} \, \ell^- \, \bar \nu_\ell$ decay in the $B$-meson rest frame are presented. We measure the total branching fraction $\mathcal{B}( \bar B^0 \to D^{*\,+} \, \ell^- \, \bar \nu_\ell ) = \left(4.95 \pm 0.11 \pm 0.22 \right) \times 10^{-2}$, where the errors are statistical and systematic respectively. The value of $\left|V_{cb} \right|$ is determined to be $\left( 37.4 \pm 1.3 \right) \times 10^{-3}$. Both results are in good agreement with current world averages.
We report the first observation of the polarization of $\Lambda/\bar{\Lambda}$ hyperons transverse to its production plane in $e^+e^-$ annihilation. We observe a significant polarization that rises with the fractional energy carried by the hyperon as well as its transverse momentum. To define the production plane, we use the direction of the hyperon momentum together with either the thrust axis in the event or the momentum vector of a hadron in the opposite hemisphere. Furthermore, we investigate the contributions to the hyperon polarization from the feed-down from $\Sigma^0/\bar{\Sigma}^0$ and $\Lambda_c^{\pm}$ decays. This measurement uses a dataset of 800.4\~fb$^{-1}$ collected by the Belle experiment at or near a center-of-mass energy of 10.58 GeV.
We present the first measurement of the Michel parameters $\bar{\eta}$ and $\xi\kappa$ in the radiative leptonic decay of the $\tau$ lepton using 703 f$\mathrm{b}^{-1}$ of data collected with the Belle detector at the KEKB $e^+e^-$ collider. The Michel parameters are measured by an unbinned maximum likelihood fit to the kinematic information of $e^+e^-\rightarrow\tau^+\tau^-\rightarrow (\pi^+\pi^0 \bar{\nu})(l^-\nu\bar{\nu}\gamma)$ $(l=e$ or $\mu)$. The preliminary values of the measured Michel parameters are $\bar{\eta} = -2.0 \pm 1.5 \pm 0.8$ and $\xi\kappa = 0.6 \pm 0.4 \pm 0.2$, where the first error is statistical and the second is systematic.
We report a measurement of the time-integrated $CP$ asymmetry in the neutral charm meson decay $D^0 \to K^0_S K^0_S$ using 921~fb$^{-1}$ data collected at the $\Upsilon(4S)$ and $\Upsilon(5S)$ resonances with the Belle detector at the KEKB asymmetric-energy $e^+e^-$ collider. The observed asymmetry is $$ A_{CP}(D^0 \to K^0_S K^0_S) = (-0.02 \pm 1.53 \pm 0.17) \%, $$ where the first uncertainty is statistical and the second systematic. This latter uncertainty is dominated by the error of the normalisation channel. The result is consistent with Standard Model expectations and improves the uncertainty with respect to previous measurement of this quantity by more than a factor of three.
We report a search for $B^{0}\to \eta \eta $ with a data sample corresponding to an integrated luminosity of $698 \,{\rm fb}^{-1}$ containing $753 \times 10^{6}$ $B\bar{B}$ pairs collected at the $\Upsilon(4S)$ resonance with the Belle detector at the KEKB asymmetric-energy $e^{+}e^{-}$ collider. The branching fraction is measured to be $\mathcal{B}(B^{0} \to \eta \eta ) = (7.6^{+2.7 +1.4}_{-2.3 -1.6}) \times 10^{-7}$ at the level of 3.3 standard deviations above zero, which provides the first evidence for the decay $B^{0} \to \eta \eta$.
We report the first measurement of the $\tau$ lepton polarization in the decay ${\bar B} \rightarrow D^* \tau^- {\bar\nu_{\tau}}$ as well as a new measurement of the ratio of the branching fractions $R(D^{*}) = \mathcal{B}({\bar B} \rightarrow D^* \tau^- {\bar\nu_{\tau}}) / \mathcal{B}({\bar B} \rightarrow D^* \ell^- {\bar\nu_{\ell}})$, where $\ell^-$ denotes an electron or a muon, with the decays $\tau^- \rightarrow \pi^- \nu_{\tau}$ and $\tau^- \rightarrow \rho^- \nu_{\tau}$. We use the full data sample of $772 \times 10^6$ $B{\bar B}$ pairs accumulated with the Belle detector at the KEKB electron-positron collider. Our preliminary results, $R(D^*) = 0.276 \pm 0.034{\rm (stat.)} ^{+0.029} _{-0.026}{\rm (syst.)}$ and $P_{\tau} = -0.44 \pm 0.47 {\rm (stat.)} ^{+0.20} _{-0.17} {\rm (syst.)}$, are consistent with the theoretical predictions of the Standard Model within $0.6$ standard deviation.
We report a study of radiative decays of \chi_{bJ}(1P)(J=0,1,2) mesons into 74 hadronic final states comprising charged and neutral pions, kaons, protons; out of these, 41 modes are observed with at least 5 standard deviation significance. Our measurements not only improve the previous measurements by the CLEO Collaboration but also lead to first observations in many new modes. The large sample allows us to probe the total decay width of the \chi_{b0}(1P). In the absence of a statistically significant result, a 90% confidence-level upper limit is set on the width at \Gamma_{total}< 2.4 MeV. Our results are based on 24.7 fb^{-1} of e+e- collision data recorded by the Belle detector at the \Upsilon(2S) resonance, corresponding to (157.8\pm3.6)\times10^6 \Upsilon(2S) decays.
We present a measurement of angular observables, $P_4'$, $P_5'$, $P_6'$, $P_8'$, in the decay $B^0 \to K^\ast(892)^0 \ell^+ \ell^-$, where $\ell^+\ell^-$ is either $e^+e^-$ or $\mu^+\mu^-$. The analysis is performed on a data sample corresponding to an integrated luminosity of $711~\mathrm{fb}^{-1}$ containing $772\times 10^{6}$ $B\bar B$ pairs, collected at the $\Upsilon(4S)$ resonance with the Belle detector at the asymmetric-energy $e^+e^-$ collider KEKB. Four angular observables, $P_{4,5,6,8}'$ are extracted in five bins of the invariant mass squared of the lepton system, $q^2$. We compare our results for $P_{4,5,6,8}'$ with Standard Model predictions including the $q^2$ region in which the LHCb collaboration reported the so-called $P_5'$ anomaly.
Quantum feedback is a technique for measuring a qubit and applying appropriate feedback depending on the measurement results. Here, we propose a new on-chip quantum feedback method where the measurement-result information is not taken from the chip to the outside of a dilution refrigerator. This can be done by using a selective qubit-energy shift induced by measurement apparatus. We demonstrate on-chip quantum feedback and succeed in the rapid initialization of a qubit by flipping the qubit state only when we detect the ground state of the qubit. The feedback loop of our quantum feedback method closed on a chip, and so the operating time needed to control a qubit is of the order of 10 ns. This operating time is shorter than with the convectional off-chip feedback method. Our on-chip quantum feedback technique opens many possibilities such as an application to quantum information processing and providing an understanding of the foundation of thermodynamics for quantum systems.
We present an extraction of azimuthal correlations between two pairs of charged pions detected in opposite jets from electron-positron annihilation. These correlations may arise from the dependence of the di-pion fragmentation on the polarization of the parent quark in the process $e^+e^- \rightarrow q \bar{q}$. Due to the correlation of the quark polarizations, the cross-section of di-pion pair production, in which the pion pairs are detected in opposite jets in a dijet event, exhibits a modulation in the azimuthal angles of the planes containing the hadron pairs with respect to the production plane. The measurement of this modulation allows access to combinations of fragmentation functions that are sensitive to the quark's transverse polarization and helicity. Within our uncertainties we do not observe a significant signal from the previously unmeasured helicity dependent fragmentation function $G_1^\perp$. This measurement uses a dataset of 938~fb$^{-1}$ collected by the Belle experiment at or near $\sqrt{s}\approx10.58$ GeV.
We derive an analytical expression for extracting the gravitational waveforms at null infinity using the Weyl scalar $\psi_4$ measured at a finite radius. Our expression is based on a series solution in orders of 1/r to the equations for gravitational perturbations about a spinning black hole. We compute this expression to order $1/r^2$ and include the spin parameter $a$ of the Kerr background. We test the accuracy of this extraction procedure by measuring the waveform for a merging black-hole binary at ten different extraction radii (in the range r/M=75-190) and for three different resolutions in the convergence regime. We find that the extraction formula provides a set of values for the radiated energy and momenta that at finite extraction radii converges towards the expected values with increasing resolution, which is not the case for the `raw' waveform at finite radius. We also examine the phase and amplitude errors in the waveform as a function of observer location and again observe the benefits of using our extraction formula. The leading corrections to the phase are ${\cal O}(1/r)$ and to the amplitude are ${\cal O}(1/r^2)$. This method provides a simple and practical way of estimating the waveform at infinity, and may be especially useful for scenarios such as well separated binaries, where the radiation zone is far from the sources, that would otherwise require extended simulation grids in order to extrapolate the `raw' waveform to infinity. Thus this method saves important computational resources and provides an estimate of errors.
We report a measurement of the amplitude ratio $r_S$ of $B^0 \to D^0K^{*0}$ and $B^0 \to \bar{D^0}K^{*0}$ decays with a model-independent Dalitz plot analysis using $D\to K_S^0\pi^+\pi^-$ decays. Using the full data sample of $772\times10^6$ $B\bar{B}$ pairs collected at the $\Upsilon(4S)$ resonance with the Belle detector at KEKB accelerator the upper limit is $r_S < 0.87$ at the 68 % confidence level. This result is the first measurement of $r_S$ with a model-independent Dalitz analysis, and is consistent with results from other analyses. The value of $r_S$ indicates the sensitivity of the decay to $\phi_3$ because the statistical uncertainty is proportional to $1/r_S$. The $r_S$ result is obtained from observables ($x_\pm$, $y_\pm$) \begin{eqnarray} x_- &=& +0.4 ^{+1.0 +0.0}_{-0.6 -0.1} \pm0.0 \\ y_- &=& -0.6 ^{+0.8 +0.1}_{-1.0 -0.0} \pm0.1 \\ x_+ &=& +0.1 ^{+0.7 +0.0}_{-0.4 -0.1} \pm0.1 \\ y_+ &=& +0.3 ^{+0.5 +0.0}_{-0.8 -0.1} \pm0.1 \\ , \end{eqnarray} where $x_\pm = r_S \cos(\delta_S \pm \phi_3)$, $y_\pm = r_S \sin(\delta_S \pm \phi_3)$ and $\phi_3 (\delta_S)$ are the weak (strong) phase difference between $B^0 \to D^0K^{*0}$ and $B^0 \to \bar{D^0}K^{*0}$. The first uncertainty is statistical, the second is the experimental systematic and the third is the systematic due to the uncertainties on $c_i$ and $s_i$ parameters measured by CLEO.
We report a measurement of the branching fraction of $B^+ \to \tau^+ \nu_\tau$ decays using a data sample of $772 \times 10^6 B \bar{B}$ pairs, collected at the $\Upsilon(4S)$ resonance with the Belle detector at the KEKB asymmetric-energy $e^+e^-$ collider. We reconstruct the accompanying $B$ meson in a semileptonic decay and detect the $B^+ \to \tau^+ \nu_\tau$ candidate in the recoiling event. We obtain a branching fraction of ${\cal B}(B^+ \to \tau^+ \nu_\tau) = [1.25 \pm 0.28 ({\rm stat.}) \pm 0.27({\rm syst.})] \times 10^{-4}$. This result is in good agreement with previous measurements and the expectation from calculations based on the Standard Model.
The Numerical INJection Analysis (NINJA) project is a collaborative effort between members of the numerical relativity and gravitational-wave astrophysics communities. The purpose of NINJA is to study the ability to detect gravitational waves emitted from merging binary black holes and recover their parameters with next-generation gravitational-wave observatories. We report here on the results of the second NINJA project, NINJA-2, which employs 60 complete binary black hole hybrid waveforms consisting of a numerical portion modelling the late inspiral, merger, and ringdown stitched to a post-Newtonian portion modelling the early inspiral. In a "blind injection challenge" similar to that conducted in recent LIGO and Virgo science runs, we added 7 hybrid waveforms to two months of data recolored to predictions of Advanced LIGO and Advanced Virgo sensitivity curves during their first observing runs. The resulting data was analyzed by gravitational-wave detection algorithms and 6 of the waveforms were recovered with false alarm rates smaller than 1 in a thousand years. Parameter estimation algorithms were run on each of these waveforms to explore the ability to constrain the masses, component angular momenta and sky position of these waveforms. We also perform a large-scale monte-carlo study to assess the ability to recover each of the 60 hybrid waveforms with early Advanced LIGO and Advanced Virgo sensitivity curves. Our results predict that early Advanced LIGO and Advanced Virgo will have a volume-weighted average sensitive distance of 300Mpc (1Gpc) for $10M_{\odot}+10M_{\odot}$ ($50M_{\odot}+50M_{\odot}$) binary black hole coalescences. We demonstrate that neglecting the component angular momenta in the waveform models used in matched-filtering will result in a reduction in sensitivity for systems with large component angular momenta. [Abstract abridged for ArXiv, full version in PDF]
We have controlled the measurement strength of the qubit readout process by using a Josephson bifurcation amplifier (JBA : an AC-driven SQUID). The optimum readout pulse changes the superposition state into an eigenstate. To clarify how a sufficiently strong measurement causes a projection phenomenon, we have studied the projection conditions in the JBA readout. We found that the projection occurs above the pulse height at which visibility starts to appear. Furthermore, the projection continues to occur as readout strength increases, even though the visibility vanishes. This result helps us understanding the JBA readout process.
The paper summarizes the parallel session B3 {\em Analytic approximations, perturbation methods, and their applications} of the GR18 conference. The talks in the session reported notably recent advances in black hole perturbations and post-Newtonian approximations as applied to sources of gravitational waves.
We propose a qubit-qubit coupling scheme for superconducting flux quantum bits (qubits), where a quantized Josephson junction resonator and microwave irradiation are utilized. The junction is used as a tunable inductance controlled by changing the bias current flowing through the junction, and thus the circuit works as a tunable resonator. This enables us to make any qubits interact with the resonator. Entanglement between two of many qubits whose level splittings satisfy some conditions, is formed by microwave irradiation causing a two-photon Rabi oscillation. Since the size of the resonator can be as large as sub-millimeters and qubits interact with it via mutual inductance, our scheme makes it possible to construct a quantum gate involving remote qubits