• ### Community targets for JWST's early release science program: evaluation of WASP-63b(1704.07421)

Aug. 30, 2018 astro-ph.EP
We present observations of WASP-63b by the Hubble Space Telescope (HST) as part of "A Preparatory Program to Identify the Single Best Transiting Exoplanet for JWST Early Release Science". WASP-63b is one of the community targets under consideration for the James Webb Space Telescope (JWST) Early Release Science (ERS) program. We present a spectrum derived from a single observation by HST Wide Field Camera 3 in the near infrared. We engaged groups across the transiting exoplanet community to participate in the analysis of the data and present results from each. There is general agreement amongst all results that we find an H2O absorption feature with 3.5-4.0 sigma significance. However, the feature is muted in comparison to a clear atmosphere at solar composition. Although the detection of the water feature is robust, the reasons for the muting of this feature are ambiguous due to a degeneracy between clouds and composition. The data does not yield robust detections of any molecular species other than H2O. The group was motivated to perform an additional set of retrieval exercises to investigate an apparent bump in the spectrum at ~ 1.55 um. We explore possible disequilibrium chemistry and find this feature is consistent with super-solar HCN abundance but it is questionable if the required mixing ratio of HCN is chemically and physically plausible. The ultimate goal of this study is to vet WASP-63b as a potential community target to best demonstrate the capabilities and systematics of JWST instruments for transiting exoplanet science. In the case of WASP-63b, the presence of a detectable water feature indicates that WASP-63b remains a plausible target for ERS observations.
• ### A better characterization of the chemical composition of exoplanets atmospheres with ARIEL(1711.08433)

May 2, 2018 astro-ph.EP
Since the discovery of the first extrasolar planet more than twenty years ago, we have discovered nearly four thousand planets orbiting stars other than the Sun. Current observational instruments (on board the Hubble Space Telescope, Spitzer, and on ground-based facilities) have allowed the scientific community to obtain important information on the physical and chemical properties of these planets. However, for a more in-depth characterisation of these worlds, more powerful telescopes are needed. Thanks to the high sensitivity of their instruments, the next generation of space observatories (e.g. JWST, ARIEL) will provide observations of unprecedented quality, allowing us to extract far more information than what was previously possible. Such high quality observations will provide constraints on theoretical models of exoplanet atmospheres and lead to a greater understanding of their physics and chemistry. Important modelling efforts have been carried out during the past few years, showing that numerous parameters and processes (such as the elemental abundances, temperature, mixing, etc.) are likely to affect the atmospheric composition of exoplanets and subsequently the observable spectra. In this manuscript, we review the different parameters that can influence the molecular composition of exoplanet atmospheres. We show that the high-precision of ARIEL observations will improve our view and characterisation of exoplanet atmospheres. We also consider future developments that are necessary to improve atmospheric models, driven by the need to interpret the available observations.
• The James Webb Space Telescope (JWST) presents the opportunity to transform our understanding of planets and the origins of life by revealing the atmospheric compositions, structures, and dynamics of transiting exoplanets in unprecedented detail. However, the high-precision, time-series observations required for such investigations have unique technical challenges, and prior experience with other facilities indicates that there will be a steep learning curve when JWST becomes operational. In this paper we describe the science objectives and detailed plans of the Transiting Exoplanet Community Early Release Science (ERS) Program, which is a recently approved program for JWST observations early in Cycle 1. The goal of this project, for which the obtained data will have no exclusive access period, is to accelerate the acquisition and diffusion of technical expertise for transiting exoplanet observations with JWST, while also providing a compelling set of representative datasets that will enable immediate scientific breakthroughs. The Transiting Exoplanet Community ERS Program will exercise the time-series modes of all four JWST instruments that have been identified as the consensus highest priorities, observe the full suite of transiting planet characterization geometries (transits, eclipses, and phase curves), and target planets with host stars that span an illustrative range of brightnesses. The observations in this program were defined through an inclusive and transparent process that had participation from JWST instrument experts and international leaders in transiting exoplanet studies. Community engagement in the project will be centered on a two-phase Data Challenge that culminates with the delivery of planetary spectra, time-series instrument performance reports, and open-source data analysis toolkits in time to inform the agenda for Cycle 2 of the JWST mission.
• ### VUV-absorption cross section of carbon dioxide from 150 to 800 K and applications to warm exoplanetary atmospheres(1709.08415)

Sept. 25, 2017 astro-ph.EP
Most exoplanets detected so far have atmospheric T significantly higher than 300K. Often close to their star, they receive an intense UV photons flux that triggers important photodissociation processes. The T dependency of VUV absorption cross sections are poorly known, leading to an undefined uncertainty in atmospheric models. Similarly, data measured at low T similar to that of the high atmosphere of Mars, Venus, and Titan are often lacking. Our aim is to quantify the T dependency of the abs. cross section of important molecules in planetary atmospheres. We want to provide both high-resolution data at T prevailing in these media and a simple parameterization of the absorption in order to simplify its use in photochemical models. This study focuses on carbon dioxide. We performed experimental measurements of CO$_2$ absorption cross section with synchrotron radiation for the wavelength range (115--200nm). For longer wavelengths (195--230nm), we used a deuterium lamp and a 1.5m Jobin-Yvon spectrometer. We used these data in our 1D thermo-photochemical model in order to study their impact on the predicted atmospheric compositions. The cross section of CO$_2$ increases with T. It can be separated in two parts: a continuum and a fine structure superimposed on the continuum. The variation of the continuum of absorption can be represented by the sum of three gaussian functions. Using data at high T in thermo-photochemical models modifies significantly the abundance and the photodissociation rates of many species, in addition to CO$_2$, such as methane and ammonia. These deviations have an impact on synthetic transmission spectra, leading to variations of up to 5 ppm. We present a full set of HR ($\Delta \lambda$=0.03nm) absorption cross sections of CO$_2$ from 115 to 230nm for T ranging from 150 to 800K.
• ### A hybrid line list for CH$_4$ and hot methane continuum(1706.05724)

June 18, 2017 astro-ph.SR, astro-ph.EP
Molecular line lists are important for modelling absorption and emission processes in atmospheres of different astronomical objects, such as cool stars and exoplanets. In order to be applicable for high temperatures, line lists for molecules like methane must contain billions of transitions, which makes their direct (line-by-line) application in radiative transfer calculations impracticable. Here we suggest a new, hybrid line list format to mitigate this problem, based on the idea of temperature-dependent absorption continuum. The line list is partitioned into a large set of relatively weak lines and a small set of important, stronger lines. The weaker lines are then used either to construct a temperature-dependent (but pressure-independent) set of intensity cross sections or are blended into a greatly reduced set of super-lines. The strong lines are kept in the form of temperature independent Einstein A coefficients. A line list for methane is constructed as a combination of 17 million strong absorption lines relative to the reference absorption spectra and a background methane continuum in two temperature-dependent forms, of cross sections and super-lines. This approach eases the use of large high temperature line lists significantly as the computationally expensive calculation of pressure dependent profiles only need to be performed for a relatively small number of lines. Both the line list and cross sections were generated using a new 34 billion methane line list (34to10), which extends the 10to10 line list to higher temperatures (up to 2000 K). The new hybrid scheme can be applied to any large line lists containing billions of transitions. We recommend to use super-lines generated on a high resolution grid based on resolving power (R = 1,000,000) to model the molecular continuum as a more flexible alternative to the temperature dependent cross sections.
• ### Repeatability of Spitzer/IRAC exoplanetary eclipses with Independent Component Analysis(1601.03959)

Feb. 25, 2016 astro-ph.EP
The research of effective and reliable detrending methods for Spitzer data is of paramount importance for the characterization of exoplanetary atmospheres. To date, the totality of exoplanetary observations in the mid- and far-infrared, at wavelengths $>$3 $\mu$m, have been taken with Spitzer. In some cases, in the past years, repeated observations and multiple reanalyses of the same datasets led to discrepant results, raising questions about the accuracy and reproducibility of such measurements. Morello et al. 2014, 2015 proposed a blind-source separation method based on the Independent Component Analysis of pixel time series (pixel-ICA) to analyze IRAC data, obtaining coherent results when applied to repeated transit observations previously debated in the literature. Here we introduce a variant to pixel-ICA through the use of wavelet transform, wavelet pixel-ICA, which extends its applicability to low-S/N cases. We describe the method and discuss the results obtained over twelve eclipses of the exoplanet XO3b observed during the "Warm Spitzer" era in the 4.5 $\mu$m band. The final results will be reported also in Ingalls et al. (in prep.), together with results obtained with other detrending methods, and over ten synthetic eclipses that were analyzed for the "IRAC Data Challenge 2015". Our results are consistent within 1 $\sigma$ with the ones reported in Wong et al. 2014. The self-consistency of individual measurements of eclipse depth and phase curve slope over a span of more than three years proves the stability of Warm Spitzer/IRAC photometry within the error bars, at the level of 1 part in 10$^4$ in stellar flux.
• ### Tau-REx II: Retrieval of emission spectra(1508.07591)

Sept. 9, 2015 astro-ph.EP
Tau-REx (Tau Retrieval of Exoplanets) is a novel, fully Bayesian atmospheric retrieval code custom built for extrasolar atmospheres. In Waldmann et al. (2015) the transmission spectroscopic case was introduced, here we present the emission spectroscopy spectral retrieval for the Tau-REx framework. Compared to transmission spectroscopy, the emission case is often significantly more degenerate due to the need to retrieve the full atmospheric temperature-pressure (TP) profile. This is particularly true in the case of current measurements of exoplanetary atmospheres, which are either of low signal-to-noise, low spectral resolution or both. Here we present a new way of combining two existing approaches to the modelling of the said TP profile: 1) the parametric profile, where the atmospheric TP structure is analytically approximated by a few model parameters, 2) the Layer-by-Layer approach, where individual atmospheric layers are modelled. Both these approaches have distinct advantages and disadvantages in terms of convergence properties and potential model biases. The Tau-REx hybrid model presented here is a new two-stage TP profile retrieval, which combines the robustness of the analytic solution with the accuracy of the Layer-by-Layer approach. The retrieval process is demonstrated using simulations of the hot-Jupiter WASP-76b and the hot SuperEarth 55 Cnc e, as well as on the secondary eclipse measurements of HD189733b.
• ### Tau-REx I: A next generation retrieval code for exoplanetary atmospheres(1409.2312)

April 6, 2015 astro-ph.EP
Spectroscopy of exoplanetary atmospheres has become a well established method for the characterisation of extrasolar planets. We here present a novel inverse retrieval code for exoplanetary atmospheres. TauRex (Tau Retrieval for Exoplanets) is a line-by-line radiative transfer fully Bayesian retrieval framework. TauRex includes the following features: 1) the optimised use of molecular line-lists from the Exomol project; 2) an unbiased atmospheric composition prior selection, through custom built pattern recognition software; 3) the use of two independent algorithms to fully sample the Bayesian likelihood space: nested sampling as well as a more classical Markov Chain Monte Carlo approach; 4) iterative Bayesian parameter and model selection using the full Bayesian Evidence as well as the Savage-Dickey Ratio for nested models, and 5) the ability to fully map very large parameter spaces through optimal code parallelisation and scalability to cluster computing. In this publication we outline the TauRex framework and demonstrate, using a theoretical hot-Jupiter transmission spectrum, the parameter retrieval and model selection. We investigate the impact of Signal-to-Noise and spectral resolution on the retrievability of individual model parameters, both in terms of error bars on the temperature and molecular mixing ratios as well as its effect on the model's global Bayesian evidence.
• ### The ground-based H, K, and L-band absolute emission spectra of HD 209458b(1409.8187)

Sept. 29, 2014 astro-ph.EP
Here we explore the capabilities of NASA's 3.0 meter Infrared Telescope Facility (IRTF) and SpeX spectrometer and the 5.08 meter Hale telescope with the TripleSpec spectrometer with near-infrared H, K, and L-band measurements of HD 209458b's secondary eclipse. Our IRTF/SpeX data are the first absolute L-band spectroscopic emission measurements of any exoplanet other than the hot Jupiter HD 189733b. Previous measurements of HD 189733b's L-band indicate bright emission hypothesized to result from non-LTE CH$_{4}$ $\nu_{3}$ fluorescence. We do not detect a similar bright 3.3 $\mu$m feature to ~3$\sigma$, suggesting that fluorescence does not need to be invoked to explain HD 209458b's L-band measurements. The validity of our observation and reduction techniques, which decrease the flux variance by up to 2.8 orders of magnitude, is reinforced by 1$\sigma$ agreement with existent $Hubble$/NICMOS and $Spitzer$/IRAC1 observations which overlap the H, K, and L-bands, suggesting that both IRTF/SpeX and Palomar/TripleSpec can measure an exoplanet's emission with high precision.
• ### Rossiter-McLaughlin Observations of 55 Cnc e(1408.2007)

Aug. 9, 2014 astro-ph.EP
We present Rossiter-McLaughlin observations of the transiting super-Earth 55 Cnc e collected during six transit events between January 2012 and November 2013 with HARPS and HARPS-N. We detect no radial-velocity signal above 35 cm/s (3-sigma) and confine the stellar v sin i to 0.2 +/- 0.5 km/s. The star appears to be a very slow rotator, producing a very low amplitude Rossiter-McLaughlin effect. Given such a low amplitude, the Rossiter-McLaughlin effect of 55 Cnc e is undetected in our data, and any spin-orbit angle of the system remains possible. We also performed Doppler tomography and reach a similar conclusion. Our results offer a glimpse of the capacity of future instrumentation to study low amplitude Rossiter-McLaughlin effects produced by super-Earths.
• ### A new look at Spitzer primary transit observations of the exoplanet HD189733b(1403.2874)

March 12, 2014 astro-ph.EP
Blind source separation techniques are used to reanalyse two exoplanetary transit lightcurves of the exoplanet HD189733b recorded with the IR camera IRAC on board the Spitzer Space Telescope at 3.6$\mu$m during the "cold" era. These observations, together with observations at other IR wavelengths, are crucial to characterise the atmosphere of the planet HD189733b. Previous analyses of the same datasets reported discrepant results, hence the necessity of the reanalyses. The method we used here is based on the Independent Component Analysis (ICA) statistical technique, which ensures a high degree of objectivity. The use of ICA to detrend single photometric observations in a self-consistent way is novel in the literature. The advantage of our reanalyses over previous work is that we do not have to make any assumptions on the structure of the unknown instrumental systematics. Such "admission of ignorance" may result in larger error bars than reported in the literature, up to a factor $1.6$. This is a worthwhile trade-off for much higher objectivity, necessary for trustworthy claims. Our main results are (1) improved and robust values of orbital and stellar parameters, (2) new measurements of the transit depths at 3.6$\mu$m, (3) consistency between the parameters estimated from the two observations, (4) repeatability of the measurement within the photometric level of $\sim 2 \times 10^{-4}$ in the IR, (5) no evidence of stellar variability at the same photometric level within 1 year.
• ### Data analysis Pipeline for EChO end-to-end simulations(1402.4408)

Feb. 18, 2014 astro-ph.EP, astro-ph.IM
Atmospheric spectroscopy of extrasolar planets is an intricate business. Atmospheric signatures typically require a photometric precision of $1 \times 10^{-4}$ in flux over several hours. Such precision demands high instrument stability as well as an understanding of stellar variability and an optimal data reduction and removal of systematic noise. In the context of the EChO mission concept, we here discuss the data reduction and analysis pipeline developed for the EChO end-to-end simulator EChOSim. We present and discuss the step by step procedures required in order to obtain the final exoplanetary spectrum from the EChOSimraw data' using a simulated observation of the secondary eclipse of the hot-Neptune 55 Cnc e.
• ### Blind extraction of an exoplanetary spectrum through Independent Component Analysis(1301.4041)

Jan. 17, 2013 astro-ph.EP, astro-ph.IM
Blind-source separation techniques are used to extract the transmission spectrum of the hot-Jupiter HD189733b recorded by the Hubble/NICMOS instrument. Such a 'blind' analysis of the data is based on the concept of independent component analysis. The de-trending of Hubble/NICMOS data using the sole assumption that nongaussian systematic noise is statistically independent from the desired light-curve signals is presented. By not assuming any prior, nor auxiliary information but the data themselves, it is shown that spectroscopic errors only about 10 - 30% larger than parametric methods can be obtained for 11 spectral bins with bin sizes of ~0.09 microns. This represents a reasonable trade-off between a higher degree of objectivity for the non-parametric methods and smaller standard errors for the parametric de-trending. Results are discussed in the light of previous analyses published in the literature. The fact that three very different analysis techniques yield comparable spectra is a strong indication of the stability of these results.
• ### Of Cocktail Parties' and Exoplanets(1106.1989)

Dec. 13, 2011 astro-ph.EP, astro-ph.IM
The characterisation of ever smaller and fainter extrasolar planets requires an intricate understanding of one's data and the analysis techniques used. Correcting the raw data at the 10^-4 level of accuracy in flux is one of the central challenges. This can be difficult for instruments that do not feature a calibration plan for such high precision measurements. Here, it is not always obvious how to de-correlate the data using auxiliary information of the instrument and it becomes paramount to know how well one can disentangle instrument systematics from one's data, given nothing but the data itself. We propose a non-parametric machine learning algorithm, based on the concept of independent component analysis, to de-convolve the systematic noise and all non-Gaussian signals from the desired astrophysical signal. Such a blind' signal de-mixing is commonly known as the Cocktail Party problem' in signal-processing. Given multiple simultaneous observations of the same exoplanetary eclipse, as in the case of spectrophotometry, we show that we can often disentangle systematic noise from the original light curve signal without the use of any complementary information of the instrument. In this paper, we explore these signal extraction techniques using simulated data and two data sets observed with the Hubble-NICMOS instrument. Another important application is the de-correlation of the exoplanetary signal from time-correlated stellar variability. Using data obtained by the Kepler mission we show that the desired signal can be de-convolved from the stellar noise using a single time series spanning several eclipse events. Such non-parametric techniques can provide important confirmations of the existent parametric corrections reported in the literature, and their associated results. Additionally they can substantially improve the precision exoplanetary light curve analysis in the future.