-
ProtoDUNE-SP is the single-phase DUNE Far Detector prototype that is under
construction and will be operated at the CERN Neutrino Platform (NP) starting
in 2018. ProtoDUNE-SP, a crucial part of the DUNE effort towards the
construction of the first DUNE 10-kt fiducial mass far detector module (17 kt
total LAr mass), is a significant experiment in its own right. With a total
liquid argon (LAr) mass of 0.77 kt, it represents the largest monolithic
single-phase LArTPC detector to be built to date. It's technical design is
given in this report.
-
We demonstrate photon counting at 1550 nm wavelength using microwave kinetic
inductance detectors (MKIDs) made from TiN/Ti/TiN trilayer films with
superconducting transition temperature Tc ~ 1.4 K. The detectors have a
lumped-element design with a large interdigitated capacitor (IDC) covered by
aluminum and inductive photon absorbers whose volume ranges from 0.4 um^3 to 20
um^3. We find that the energy resolution improves as the absorber volume is
reduced. We have achieved an energy resolution of 0.22 eV and resolved up to 7
photons per pulse, both greatly improved from previously reported results at
1550 nm wavelength using MKIDs. Further improvements are possible by optimizing
the optical coupling to maximize photon absorption into the inductive absorber.
-
HOLMES is a new experiment aiming at directly measuring the neutrino mass
with a sensitivity below 2 eV. HOLMES will perform a calorimetric measurement
of the energy released in the decay of $^{163}$Ho. The calorimetric measurement
eliminates systematic uncertainties arising from the use of external beta
sources, as in experiments with spectrometers. This measurement was proposed in
1982 by A. De Rujula and M. Lusignoli, but only recently the detector
technological progress has allowed to design a sensitive experiment. HOLMES
will deploy a large array of low temperature microcalorimeters with implanted
$^{163}$Ho nuclei. HOLMES, besides being an important step forward in the
direct neutrino mass measurement with a calorimetric approach, will also
establish the potential of this approach to extend the sensitivity down to 0.1
eV and lower. In its final configuration HOLMES will collect about $3\cdot
10^{13}$ decays with 1000 detectors characterized by an instrumental energy
resolution of the order of few eV and a time resolution of few microseconds. To
embed the $^{163}$Ho into the gold absorbers a custom mass separator ion
implanter is being developed. The detectors used for the HOLMES experiment will
be Mo/Cu bilayers TESs (Transition Edge Sensors) on SiN$_x$ membrane with gold
absorbers. Microwave multiplexed rf-SQUIDs are the best available technique to
read out large array of such detectors. An extensive R&D activity is in
progress in order to maximize the multiplexing factor while preserving the
performances of the individual detectors. The current activities are focused on
the the single detector performances optimization and on the $^{163}$Ho isotope
production and embedding. A preliminary measurement of a sub-array of $4\times
16$ detectors is planned late in 2017. In this contribution we present the
HOLMES project with its technical challenges, its status and perspectives.
-
This document presents the Conceptual Design Report (CDR) put forward by an
international neutrino community to pursue the Deep Underground Neutrino
Experiment at the Long-Baseline Neutrino Facility (LBNF/DUNE), a groundbreaking
science experiment for long-baseline neutrino oscillation studies and for
neutrino astrophysics and nucleon decay searches. The DUNE far detector will be
a very large modular liquid argon time-projection chamber (LArTPC) located deep
underground, coupled to the LBNF multi-megawatt wide-band neutrino beam. DUNE
will also have a high-resolution and high-precision near detector.
-
For experiments with high arrival rates, reliable identification of
nearly-coincident events can be crucial. For calorimetric measurements to
directly measure the neutrino mass such as HOLMES, unidentified pulse pile-ups
are expected to be a leading source of experimental error. Although Wiener
filtering can be used to recognize pile-up, it suffers errors due to
pulse-shape variation from detector nonlinearity, readout dependence on
sub-sample arrival times, and stability issues from the ill-posed deconvolution
problem of recovering Dirac delta-functions from smooth data. Due to these
factors, we have developed a processing method that exploits singular value
decomposition to (1) separate single-pulse records from piled-up records in
training data and (2) construct a model of single-pulse records that accounts
for varying pulse shape with amplitude, arrival time, and baseline level,
suitable for detecting nearly-coincident events. We show that the resulting
processing advances can reduce the required performance specifications of the
detectors and readout system or, equivalently, enable larger sensor arrays and
better constraints on the neutrino mass.
-
The European Research Council has recently funded HOLMES, a new experiment to
directly measure the neutrino mass. HOLMES will perform a calorimetric
measurement of the energy released in the decay of 163Ho. The calorimetric
measurement eliminates systematic uncertainties arising from the use of
external beta sources, as in experiments with beta spectrometers. This
measurement was proposed in 1982 by A. De Rujula and M. Lusignoli, but only
recently the detector technological progress allowed to design a sensitive
experiment. HOLMES will deploy a large array of low temperature
microcalorimeters with implanted 163Ho nuclei. The resulting mass sensitivity
will be as low as 0.4 eV. HOLMES will be an important step forward in the
direct neutrino mass measurement with a calorimetric approach as an alternative
to spectrometry. It will also establish the potential of this approach to
extend the sensitivity down to 0.1 eV. We outline here the project with its
technical challenges and perspectives.
-
We have carried out simulations to predict the performance of a new
space-based telescopic survey operating at thermal infrared wavelengths that
seeks to discover and characterize a large fraction of the potentially
hazardous near-Earth asteroid (NEA) population. Two potential architectures for
the survey were considered: one located at the Earth-Sun L1 Lagrange point, and
one in a Venus-trailing orbit. A sample cadence was formulated and tested,
allowing for the self-follow-up necessary for objects discovered in the daytime
sky on Earth. Synthetic populations of NEAs with sizes >=140 m in effective
spherical diameter were simulated using recent determinations of their physical
and orbital properties. Estimates of the instrumental sensitivity, integration
times, and slew speeds were included for both architectures assuming the
properties of new large-format 10 um detector arrays capable of operating at
~35 K. Our simulation included the creation of a preliminary version of a
moving object processing pipeline suitable for operating on the trial cadence.
We tested this pipeline on a simulated sky populated with astrophysical sources
such as stars and galaxies extrapolated from Spitzer and WISE data, the catalog
of known minor planets (including Main Belt asteroids, comets, Jovian Trojans,
etc.), and the synthetic NEA model. Trial orbits were computed for simulated
position-time pairs extracted from the synthetic surveys to verify that the
tested cadence would result in orbits suitable for recovering objects at a
later time. Our results indicate that the Earth-Sun L1 and Venus-trailing
surveys achieve similar levels of integral completeness for potentially
hazardous asteroids larger than 140 m; placing the telescope in an interior
orbit does not yield an improvement in discovery rates. This work serves as a
necessary first step for the detailed planning of a next-generation NEA survey.
-
NASA's Wide-field Infrared Survey Explorer (WISE) spacecraft has been brought
out of hibernation and has resumed surveying the sky at 3.4 and 4.6 um. The
scientific objectives of the NEOWISE reactivation mission are to detect, track,
and characterize near-Earth asteroids and comets. The search for minor planets
resumed on December 23, 2013, and the first new near-Earth object (NEO) was
discovered six days later. As an infrared survey, NEOWISE detects asteroids
based on their thermal emission and is equally sensitive to high and low albedo
objects; consequently, NEOWISE-discovered NEOs tend to be large and dark. Over
the course of its three-year mission, NEOWISE will determine
radiometrically-derived diameters and albedos for approximately 2000 NEOs and
tens of thousands of Main Belt asteroids. The 32 months of hibernation have had
no significant effect on the mission's performance. Image quality, sensitivity,
photometric and astrometric accuracy, completeness, and the rate of minor
planet detections are all essentially unchanged from the prime mission's
post-cryogenic phase.
-
In this paper we present a new measurement setup, where a transitionedge
sensor detector array is used to detect X-rays in particle induced X-ray
emission measurements with a 2 MeV proton beam. Transition-edge sensors offer
orders of magnitude improvement in energy resolution compared to conventional
silicon or germanium detectors, making it possible to recognize spectral lines
in materials analysis that have previously been impossible to resolve, and to
get chemical information from the elements. Our sensors are cooled to the
operation temperature (65 mK) with a cryogen-free adiabatic demagnetization
refrigerator, which houses a specially designed X-ray snout that has a vacuum
tight window to couple in the radiation. For the best pixel, the measured
instrumental energy resolution was 3.06 eV full width at half maximum at 5.9
keV.We discuss the current status of the project, benefits of transition-edge
sensors when used in particle induced X-ray emission spectroscopy, and the
results from the first measurements.
-
The increasing scale of cryogenic detector arrays for sub-millimeter and
millimeter wavelength astrophysics has led to the need for large aperture, high
index of refraction, low loss, cryogenic refracting optics. Silicon with n =
3.4, low loss, and relatively high thermal conductivity is a nearly optimal
material for these purposes, but requires an antireflection (AR) coating with
broad bandwidth, low loss, low reflectance, and a matched coefficient of
thermal expansion. We present an AR coating for curved silicon optics comprised
of subwavelength features cut into the lens surface with a custom three axis
silicon dicing saw. These features constitute a metamaterial that behaves as a
simple dielectric coating. We have fabricated and coated silicon lenses as
large as 33.4 cm in diameter with coatings optimized for use between 125-165
GHz. Our design reduces average reflections to a few tenths of a percent for
angles of incidence up to 30 degrees with low cross-polarization. We describe
the design, tolerance, manufacture, and measurements of these coatings and
present measurements of the optical properties of silicon at millimeter
wavelengths at cryogenic and room temperatures. This coating and lens
fabrication approach is applicable from centimeter to sub-millimeter
wavelengths and can be used to fabricate coatings with greater than octave
bandwidth.
-
After eight months of continuous observations, the Wide-field Infrared Survey
Explorer (WISE) mapped the entire sky at 3.4 {\mu}m, 4.6 {\mu}m, 12 {\mu}m and
22 {\mu}m. We have begun a dedicated WISE High Resolution Galaxy Atlas (WHRGA)
project to fully characterize large, nearby galaxies and produce a legacy image
atlas and source catalogue. Here we summarize the deconvolution technique used
to significantly improve the spatial resolution of WISE imaging, specifically
designed to study the internal anatomy of nearby galaxies. As a case study, we
present results for the galaxy NGC 1566, comparing the WISE super-resolution
image processing to that of Spitzer, GALEX and ground-based imaging. The is the
first paper in a two part series; results for a much larger sample of nearby
galaxies is presented in the second paper.
-
In early 2010, the Long-Baseline Neutrino Experiment (LBNE) science
collaboration initiated a study to investigate the physics potential of the
experiment with a broad set of different beam, near- and far-detector
configurations. Nine initial topics were identified as scientific areas that
motivate construction of a long-baseline neutrino experiment with a very large
far detector. We summarize the scientific justification for each topic and the
estimated performance for a set of far detector reference configurations. We
report also on a study of optimized beam parameters and the physics capability
of proposed Near Detector configurations. This document was presented to the
collaboration in fall 2010 and updated with minor modifications in early 2011.
-
Given a bounding class $B$, we construct a bounded refinement $BK(-)$ of
Quillen's $K$-theory functor from rings to spaces. $BK(-)$ is a functor from
weighted rings to spaces, and is equipped with a comparison map $BK \to K$
induced by "forgetting control". In contrast to the situation with $B$-bounded
cohomology, there is a functorial splitting $BK(-) \simeq K(-) \times
BK^{rel}(-)$ where $BK^{rel}(-)$ is the homotopy fiber of the comparison map.
-
The \emph{Wide-field Infrared Survey Explorer} has surveyed the entire sky at
four infrared wavelengths with greatly improved sensitivity and spatial
resolution compared to its predecessors, the \emph{Infrared Astronomical
Satellite} and the \emph{Cosmic Background Explorer}. NASA's Planetary Science
Division has funded an enhancement to the \WISE\ data processing system called
"NEOWISE" that allows detection and archiving of moving objects found in the
\WISE\ data. NEOWISE has mined the \WISE\ images for a wide array of small
bodies in our Solar System, including Near-Earth Objects (NEOs), Main Belt
asteroids, comets, Trojans, and Centaurs. By the end of survey operations in
February 2011, NEOWISE identified over 157,000 asteroids, including more than
500 NEOs and $\sim$120 comets. The NEOWISE dataset will enable a panoply of new
scientific investigations.
-
The Atacama B-mode Search (ABS) experiment is a 145 GHz polarimeter designed
to measure the B-mode polarization of the Cosmic Microwave Background (CMB) at
large angular scales. The ABS instrument will ship to the Atacama Desert of
Chile fully tested and ready to observe in 2010. ABS will image
large-angular-scale CMB polarization anisotropies onto a focal plane of 240
feedhorn-coupled, transition-edge sensor (TES) polarimeters, using a cryogenic
crossed-Dragone design. The ABS detectors, which are fabricated at NIST, use
orthomode transducers to couple orthogonal polarizations of incoming radiation
onto separate TES bolometers. The incoming radiation is modulated by an
ambient-temperature half-wave plate in front of the vacuum window at an
aperture stop. Preliminary detector characterization indicates that the ABS
detectors can achieve a sensitivity of 300 $\mu K \sqrt{s}$ in the field. This
paper describes the ABS optical design and detector readout scheme, including
feedhorn design and performance, magnetic shielding, focal plane architecture,
and cryogenic electronics.
-
Modern cosmology has sharpened questions posed for millennia about the origin
of our cosmic habitat. The age-old questions have been transformed into two
pressing issues primed for attack in the coming decade: How did the Universe
begin? and What physical laws govern the Universe at the highest energies? The
clearest window onto these questions is the pattern of polarization in the
Cosmic Microwave Background (CMB), which is uniquely sensitive to primordial
gravity waves. A detection of the special pattern produced by gravity waves
would be not only an unprecedented discovery, but also a direct probe of
physics at the earliest observable instants of our Universe. Experiments which
map CMB polarization over the coming decade will lead us on our first steps
towards answering these age-old questions.