• ### Microliter viscometry using a bright-field microscope: $\eta$-DDM(1804.02664)

April 8, 2018 cond-mat.soft
Passive microrheology exploits the Brownian motion of colloidal tracer particles. From the mean-squared displacement (MSD) of the tracers, the bulk rheological and viscometric properties of the host medium can be inferred. Here, the MSD is determined by applying Differential Dynamic Microscopy (DDM). Compared to other microscopy techniques, DDM avoids particle tracking but provides parameters commonly acquired in light scattering experiments. Based on the spatial Fourier transform of image differences, the intermediate scattering function and subsequently the MSD is calculated. Then the usual microrheology procedure and the empirical Cox-Merz rule yield the steady-shear viscosity. This method, $\eta$-DDM, is tested and illustrated using three different systems: Newtonian fluids (glycerol-water mixtures), colloidal suspensions (protein samples) and a viscoelastic polymer solution (aqueous poly(ethylene oxide) solution). These tests show that common lab equipment, namely a bright-field optical microscope, can be used as a convenient and reliable microliter viscometer. Because $\eta$-DDM requires much smaller sample volumes than classical rheometry, only about a microliter, it is particularly useful for biological and soft matter systems.
• ### AWAKE readiness for the study of the seeded self-modulation of a 400\,GeV proton bunch(1708.01087)

AWAKE is a proton-driven plasma wakefield acceleration experiment. % We show that the experimental setup briefly described here is ready for systematic study of the seeded self-modulation of the 400\,GeV proton bunch in the 10\,m-long rubidium plasma with density adjustable from 1 to 10$\times10^{14}$\,cm$^{-3}$. % We show that the short laser pulse used for ionization of the rubidium vapor propagates all the way along the column, suggesting full ionization of the vapor. % We show that ionization occurs along the proton bunch, at the laser time and that the plasma that follows affects the proton bunch. %
• ### AWAKE, The Advanced Proton Driven Plasma Wakefield Acceleration Experiment at CERN(1512.05498)

The Advanced Proton Driven Plasma Wakefield Acceleration Experiment (AWAKE) aims at studying plasma wakefield generation and electron acceleration driven by proton bunches. It is a proof-of-principle R&D experiment at CERN and the world's first proton driven plasma wakefield acceleration experiment. The AWAKE experiment will be installed in the former CNGS facility and uses the 400 GeV/c proton beam bunches from the SPS. The first experiments will focus on the self-modulation instability of the long (rms ~12 cm) proton bunch in the plasma. These experiments are planned for the end of 2016. Later, in 2017/2018, low energy (~15 MeV) electrons will be externally injected to sample the wakefields and be accelerated beyond 1 GeV. The main goals of the experiment will be summarized. A summary of the AWAKE design and construction status will be presented.
• ### Path to AWAKE: Evolution of the concept(1511.09032)

This report describes the conceptual steps in reaching the design of the AWAKE experiment currently under construction at CERN. We start with an introduction to plasma wakefield acceleration and the motivation for using proton drivers. We then describe the self-modulation instability --- a key to an early realization of the concept. This is then followed by the historical development of the experimental design, where the critical issues that arose and their solutions are described. We conclude with the design of the experiment as it is being realized at CERN and some words on the future outlook. A summary of the AWAKE design and construction status as presented in this conference is given in [1].
• ### Electromechanical properties of freestanding graphene functionalized with tin oxide (SnO2) nanoparticles(1502.00613)

Feb. 2, 2015 cond-mat.mes-hall
Freestanding graphene membranes were functionalized with SnO2 nanoparticles. A detailed procedure providing uniform coverage and chemical synthesis is presented. Elemental composition was determined using scanning electron microscopy combined with energy dispersive X-ray analysis. A technique called electrostatic-manipulation scanning tunneling microscopy was used to probe the electromechanical properties of functionalized freestanding graphene samples. We found ten times larger movement perpendicular to the plane compared to pristine freestanding graphene, and propose a nanoparticle encapsulation model.
• ### Target atmospheric CO2: Supporting material(0804.1135)

Oct. 15, 2008 physics.ao-ph
Additional material supporting the article "Target atmospheric CO2: Where should humanity aim?"
• ### Target atmospheric CO2: Where should humanity aim?(0804.1126)

Oct. 15, 2008 physics.ao-ph
Paleoclimate data show that climate sensitivity is ~3 deg-C for doubled CO2, including only fast feedback processes. Equilibrium sensitivity, including slower surface albedo feedbacks, is ~6 deg-C for doubled CO2 for the range of climate states between glacial conditions and ice-free Antarctica. Decreasing CO2 was the main cause of a cooling trend that began 50 million years ago, large scale glaciation occurring when CO2 fell to 450 +/- 100 ppm, a level that will be exceeded within decades, barring prompt policy changes. If humanity wishes to preserve a planet similar to that on which civilization developed and to which life on Earth is adapted, paleoclimate evidence and ongoing climate change suggest that CO2 will need to be reduced from its current 385 ppm to at most 350 ppm. The largest uncertainty in the target arises from possible changes of non-CO2 forcings. An initial 350 ppm CO2 target may be achievable by phasing out coal use except where CO2 is captured and adopting agricultural and forestry practices that sequester carbon. If the present overshoot of this target CO2 is not brief, there is a possibility of seeding irreversible catastrophic effects.
• ### How Can We Avert Dangerous Climate Change?(0706.3720)

June 25, 2007 physics.ao-ph
Recent analyses indicate that the amount of atmospheric CO2 required to cause dangerous climate change is at most 450 ppm, and likely less than that. Reductions of non-CO2 climate forcings can provide only moderate, albeit important, adjustments to the CO2 limit. Realization of how close the planet is to "tipping points" with unacceptable consequences, especially ice sheet disintegration with sea level rise out of humanity's control, has a bright side. It implies an imperative: we must find a way to keep the CO2 amount so low that it will also avert other detrimental effects that had begun to seem inevitable, e.g., ocean acidification, loss of most alpine glaciers and thus the water supply for millions of people, and shifting of climatic zones with consequent extermination of species. Here I outline from a scientific perspective actions needed to achieve low limits on CO2 and global warming. These changes are technically feasible and have ancillary benefits. Achievement of needed changes requires overcoming the spurious argument that developed and developing countries have equivalent responsibilities, as well as overcoming special interests advocating minimalist or counterproductive actions such as corn-based ethanol and liquid-fuel-from-coal programs.
• ### Climate simulations for 1880-2003 with GISS modelE(physics/0610109)

April 12, 2007 physics.ao-ph, physics.geo-ph
We carry out climate simulations for 1880-2003 with GISS modelE driven by ten measured or estimated climate forcings. An ensemble of climate model runs is carried out for each forcing acting individually and for all forcing mechanisms acting together. We compare side-by-side simulated climate change for each forcing, all forcings, observations, unforced variability among model ensemble members, and, if available, observed variability. Discrepancies between observations and simulations with all forcings are due to model deficiencies, inaccurate or incomplete forcings, and imperfect observations. Although there are notable discrepancies between model and observations, the fidelity is sufficient to encourage use of the model for simulations of future climate change. By using a fixed well-documented model and accurately defining the 1880-2003 forcings, we aim to provide a benchmark against which the effect of improvements in the model, climate forcings, and observations can be tested. Principal model deficiencies include unrealistically weak tropical El Nino-like variability and a poor distribution of sea ice, with too much sea ice in the Northern Hemisphere and too little in the Southern Hemisphere. The greatest uncertainties in the forcings are the temporal and spatial variations of anthropogenic aerosols and their indirect effects on clouds.
• ### Dangerous human-made interference with climate: A GISS modelE study(physics/0610115)

Oct. 16, 2006 physics.ao-ph, physics.geo-ph
We investigate the issue of "dangerous human-made interference with climate" using simulations with GISS modelE driven by measured or estimated forcings for 1880-2003 and extended to 2100 for IPCC greenhouse gas scenarios as well as the 'alternative' scenario of Hansen and Sato. Identification of 'dangerous' effects is partly subjective, but we find evidence that added global warming of more than 1 degree C above the level in 2000 has effects that may be highly disruptive. The alternative scenario, with peak added forcing ~1.5 W/m2 in 2100, keeps further global warming under 1 degree C if climate sensitivity is \~3 degrees C or less for doubled CO2. We discuss three specific sub-global topics: Arctic climate change, tropical storm intensification, and ice sheet stability. Growth of non-CO2 forcings has slowed in recent years, but CO2 emissions are now surging well above the alternative scenario. Prompt actions to slow CO2 emissions and decrease non-CO2 forcings are needed to achieve the low forcing of the alternative scenario.