Accurate shape measurements are essential to infer cosmological parameters from large area weak gravitational lensing studies. The compact diffraction-limited point-spread function (PSF) in space-based observations is greatly beneficial, but its chromaticity for a broad band observation can lead to new subtle effects that could hitherto be ignored: the PSF of a galaxy is no longer uniquely defined and spatial variations in the colours of galaxies result in biases in the inferred lensing signal. Taking Euclid as a reference, we show that this colourgradient bias (CG bias) can be quantified with high accuracy using available multi-colour Hubble Space Telescope (HST) data. In particular we study how noise in the HST observations might impact such measurements and find this to be negligible. We determine the CG bias using HST observations in the F606W and F814W filters and observe a correlation with the colour, in line with expectations, whereas the dependence with redshift is weak. The biases for individual galaxies are generally well below 1%, which may be reduced further using morphological information from the Euclid data. Our results demonstrate that CG bias should not be ignored, but it is possible to determine its amplitude with sufficient precision, so that it will not significantly bias the weak lensing measurements using Euclid data.

Cosmic acceleration is the most surprising cosmological discovery in many decades. Testing and distinguishing among possible explanations requires cosmological measurements of extremely high precision probing the full history of cosmic expansion and structure growth and, ideally, compare and contrast matter and relativistic tracers of the gravity potential. This program is one of the defining objectives of the Wide-Field Infrared Survey Telescope (WFIRST), as set forth in the New Worlds, New Horizons report (NWNH) in 2010. The WFIRST mission has the ability to improve these measurements by 1-2 orders of magnitude compared to the current state of the art, while simultaneously extending their redshift grasp, greatly improving control of systematic effects, and taking a unified approach to multiple probes that provide complementary physical information and cross-checks of cosmological results. We describe in this annual report the activities of the Science Investigation Team (SIT) "Cosmology with the High Latitude Survey (HLS)" during the year 2017. This team was selected by NASA in December 2015 in order to address the stringent challenges of the WFIRST dark energy (DE) program through the Project's formulation phase. This SIT has elected to jointly address Galaxy Redshift Survey, Weak Lensing and Cluster Growth and thus fully embrace the fact that the imaging and spectroscopic elements of the HLS will be realized as an integrated observing program, and they jointly impose requirements on performance and operations. WFIRST is designed to be able to deliver a definitive result on the origin of cosmic acceleration. It is not optimized for Figure of Merit sensitivity but for control of systematic uncertainties and for having multiple techniques each with multiple cross-checks. Our SIT work focuses on understanding the potential systematics in the WFIRST DE measurements.

ATLAS (Astrophysics Telescope for Large Area Spectroscopy) Probe is a concept for a NASA probe-class space mission, the spectroscopic follow-up to WFIRST, multiplexing its scientific return by obtaining deep 1 to 4 micron slit spectroscopy for ~90% of all galaxies imaged by the ~2200 sq deg WFIRST High Latitude Survey at z > 0.5. ATLAS spectroscopy will measure accurate and precise redshifts for ~300M galaxies out to z < 7, and deliver spectra that enable a wide range of diagnostic studies of the physical properties of galaxies over most of cosmic history. ATLAS and WFIRST together will produce a 3D map of the Universe with ~Mpc resolution in redshift space. ATLAS will: (1) Revolutionize galaxy evolution studies by tracing the relation between galaxies and dark matter from galaxy groups to cosmic voids and filaments, from the epoch of reionization through the peak era of galaxy assembly; (2) Open a new window into the dark Universe by weighing the dark matter filaments using 3D weak lensing with spectroscopic redshifts, and obtaining definitive measurements of dark energy and modification of General Relativity using galaxy clustering; (3) Probe the Milky Way's dust-enshrouded regions, reaching the far side of our Galaxy; and (4) Explore the formation history of the outer Solar System by characterizing Kuiper Belt Objects. ATLAS is a 1.5m telescope with a field of view (FoV) of 0.4 sq deg, and uses Digital Micro-mirror Devices (DMDs) as slit selectors. It has a spectroscopic resolution of R = 600, a wavelength range of 1-4 microns, and a spectroscopic multiplex factor ~5,000-10,000. ATLAS is designed to fit within the NASA probe-class mission cost envelope; it has a single instrument, a telescope aperture that allows for a lighter launch vehicle, and mature technology (DMDs can reach TRL 6 within 2 years). ATLAS will lead to transformative science over the entire range of astrophysics.

As astronomical observations from space benefit from improved sensitivity, the effectiveness of scientific programs is becoming limited by systematics that often originate in poorly understood image sensor behavior. Traditional, bottom-up detector characterization methods provide one way to model underlying detector physics, and generate ever more faithful numerical simulations, but this approach is vulnerable to preconceptions and over-simplification. The alternative top-down approach is laboratory emulation, which enables observation, calibration, and analysis scenarios to be tested without relying on a complete understanding of the underlying physics. This complements detector characterization and simulation efforts by testing their validity. We describe a laboratory facility and experimental testbed that supports the emulation of a wide range of mission concepts such as gravitational weak lensing measurements by WFIRST and high precision spectrophotometry of transiting exoplanets by JWST. An Offner relay projects readily customizable "scenes" (e.g. stars, galaxies, spectra) with very low optical aberration over the full area of a typical optical or near infrared image sensor. f/8 and slower focal ratios may be selected, spanning those of most proposed space missions and approximating the point spread function (PSF) size of seeing limited ground based surveys. Diffraction limited PSFs are projected over a wide field of view and wavelength range to deliver highly predictable image patterns down to sub-pixel scales with stable intensity and fine motion control. The testbed enables realistic validation of detector performance on science-like images, which aids mission design and survey strategy, as well as targeted investigations of various detector effects.

The Large Synoptic Survey Telescope is designed to provide an unprecedented optical imaging dataset that will support investigations of our Solar System, Galaxy and Universe, across half the sky and over ten years of repeated observation. However, exactly how the LSST observations will be taken (the observing strategy or "cadence") is not yet finalized. In this dynamically-evolving community white paper, we explore how the detailed performance of the anticipated science investigations is expected to depend on small changes to the LSST observing strategy. Using realistic simulations of the LSST schedule and observation properties, we design and compute diagnostic metrics and Figures of Merit that provide quantitative evaluations of different observing strategies, analyzing their impact on a wide range of proposed science projects. This is work in progress: we are using this white paper to communicate to each other the relative merits of the observing strategy choices that could be made, in an effort to maximize the scientific value of the survey. The investigation of some science cases leads to suggestions for new strategies that could be simulated and potentially adopted. Notably, we find motivation for exploring departures from a spatially uniform annual tiling of the sky: focusing instead on different parts of the survey area in different years in a "rolling cadence" is likely to have significant benefits for a number of time domain and moving object astronomy projects. The communal assembly of a suite of quantified and homogeneously coded metrics is the vital first step towards an automated, systematic, science-based assessment of any given cadence simulation, that will enable the scheduling of the LSST to be as well-informed as possible.

A key goal of the Stage IV dark energy experiments Euclid, LSST and WFIRST is to measure the growth of structure with cosmic time from weak lensing analysis over large regions of the sky. Weak lensing cosmology will be challenging: in addition to highly accurate galaxy shape measurements, statistically robust and accurate photometric redshift (photo-z) estimates for billions of faint galaxies will be needed in order to reconstruct the three-dimensional matter distribution. Here we present an overview of and initial results from the Complete Calibration of the Color-Redshift Relation (C3R2) survey, designed specifically to calibrate the empirical galaxy color-redshift relation to the Euclid depth. These redshifts will also be important for the calibrations of LSST and WFIRST. The C3R2 survey is obtaining multiplexed observations with Keck (DEIMOS, LRIS, and MOSFIRE), the Gran Telescopio Canarias (GTC; OSIRIS), and the Very Large Telescope (VLT; FORS2 and KMOS) of a targeted sample of galaxies most important for the redshift calibration. We focus spectroscopic efforts on under-sampled regions of galaxy color space identified in previous work in order to minimize the number of spectroscopic redshifts needed to map the color-redshift relation to the required accuracy. Here we present the C3R2 survey strategy and initial results, including the 1283 high confidence redshifts obtained in the 2016A semester and released as Data Release 1.

The next generation weak lensing surveys (i.e., LSST, Euclid and WFIRST) will require exquisite control over systematic effects. In this paper, we address shear calibration and present the most realistic forecast to date for LSST/Euclid/WFIRST and CMB lensing from a stage 4 CMB experiment (CMB S4). We use the CosmoLike code to simulate a joint analysis of all the two-point functions of galaxy density, galaxy shear and CMB lensing convergence. We include the full Gaussian and non-Gaussian covariances and explore the resulting joint likelihood with Monte Carlo Markov Chains. We constrain shear calibration biases while simultaneously varying cosmological parameters, galaxy biases and photometric redshift uncertainties. We find that CMB lensing from CMB S4 enables the calibration of the shear biases down to 0.2% - 3% in 10 tomographic bins for LSST (below the ~0.5% requirements in most tomographic bins), down to 0.4% - 2.4% in 10 bins for Euclid and 0.6% - 3.2% in 10 bins for WFIRST. For a given lensing survey, the method works best at high redshift where shear calibration is otherwise most challenging. This self-calibration is robust to Gaussian photometric redshift uncertainties and to a reasonable level of intrinsic alignment. It is also robust to changes in the beam and the effectiveness of the component separation of the CMB experiment, and slowly dependent on its depth, making it possible with third generation CMB experiments such as AdvACT and SPT-3G, as well as the Simons Observatory.

SPHEREx is a proposed SMEX mission selected for Phase A. SPHEREx will carry out the first all-sky spectral survey and provide for every 6.2" pixel a spectra between 0.75 and 4.18 $\mu$m [with R$\sim$41.4] and 4.18 and 5.00 $\mu$m [with R$\sim$135]. The SPHEREx team has proposed three specific science investigations to be carried out with this unique data set: cosmic inflation, interstellar and circumstellar ices, and the extra-galactic background light. It is readily apparent, however, that many other questions in astrophysics and planetary sciences could be addressed with the SPHEREx data. The SPHEREx team convened a community workshop in February 2016, with the intent of enlisting the aid of a larger group of scientists in defining these questions. This paper summarizes the rich and varied menu of investigations that was laid out. It includes studies of the composition of main belt and Trojan/Greek asteroids; mapping the zodiacal light with unprecedented spatial and spectral resolution; identifying and studying very low-metallicity stars; improving stellar parameters in order to better characterize transiting exoplanets; studying aliphatic and aromatic carbon-bearing molecules in the interstellar medium; mapping star formation rates in nearby galaxies; determining the redshift of clusters of galaxies; identifying high redshift quasars over the full sky; and providing a NIR spectrum for most eROSITA X-ray sources. All of these investigations, and others not listed here, can be carried out with the nominal all-sky spectra to be produced by SPHEREx. In addition, the workshop defined enhanced data products and user tools which would facilitate some of these scientific studies. Finally, the workshop noted the high degrees of synergy between SPHEREx and a number of other current or forthcoming programs, including JWST, WFIRST, Euclid, GAIA, K2/Kepler, TESS, eROSITA and LSST.

We present a weak lensing study of the galaxy cluster IDCS J1426.5+3508 at $z=1.75$, which is the highest redshift strong lensing cluster known and the most distant cluster for which a weak lensing analysis has been undertaken. Using F160W, F814W, and F606W observations with the Hubble Space Telescope, we detect tangential shear at $2\sigma$ significance. Fitting a Navarro-Frenk-White mass profile to the shear with a theoretical median mass-concentration relation, we derive a mass $M_{200,\mathrm{crit}}=2.3^{+2.1}_{-1.4}\times10^{14}$ M$_{\odot}$. This mass is consistent with previous mass estimates from the Sunyaev-Zel'dovich (SZ) effect, X-ray, and strong lensing. The cluster lies on the local SZ-weak lensing mass scaling relation observed at low redshift, indicative of minimal evolution in this relation.

Calibrating the photometric redshifts of >10^9 galaxies for upcoming weak lensing cosmology experiments is a major challenge for the astrophysics community. The path to obtaining the required spectroscopic redshifts for training and calibration is daunting, given the anticipated depths of the surveys and the difficulty in obtaining secure redshifts for some faint galaxy populations. Here we present an analysis of the problem based on the self-organizing map, a method of mapping the distribution of data in a high-dimensional space and projecting it onto a lower-dimensional representation. We apply this method to existing photometric data from the COSMOS survey selected to approximate the anticipated Euclid weak lensing sample, enabling us to robustly map the empirical distribution of galaxies in the multidimensional color space defined by the expected Euclid filters. Mapping this multicolor distribution lets us determine where - in galaxy color space - redshifts from current spectroscopic surveys exist and where they are systematically missing. Crucially, the method lets us determine whether a spectroscopic training sample is representative of the full photometric space occupied by the galaxies in a survey. We explore optimal sampling techniques and estimate the additional spectroscopy needed to map out the color-redshift relation, finding that sampling the galaxy distribution in color space in a systematic way can efficiently meet the calibration requirements. While the analysis presented here focuses on the Euclid survey, similar analysis can be applied to other surveys facing the same calibration challenge, such as DES, LSST, and WFIRST.

Radiation damage to space-based Charge-Coupled Device (CCD) detectors creates defects which result in an increasing Charge Transfer Inefficiency (CTI) that causes spurious image trailing. Most of the trailing can be corrected during post-processing, by modelling the charge trapping and moving electrons back to where they belong. However, such correction is not perfect -- and damage is continuing to accumulate in orbit. To aid future development, we quantify the limitations of current approaches, and determine where imperfect knowledge of model parameters most degrade measurements of photometry and morphology. As a concrete application, we simulate $1.5\times10^{9}$ "worst case" galaxy and $1.5\times10^{8}$ star images to test the performance of the Euclid visual instrument detectors. There are two separable challenges: If the model used to correct CTI is perfectly the same as that used to add CTI, $99.68$ % of spurious ellipticity is corrected in our setup. This is because readout noise is not subject to CTI, but gets over-corrected during correction. Second, if we assume the first issue to be solved, knowledge of the charge trap density within $\Delta\rho/\rho\!=\!(0.0272\pm0.0005)$ %, and the characteristic release time of the dominant species to be known within $\Delta\tau/\tau\!=\!(0.0400\pm0.0004)$ % will be required. This work presents the next level of definition of in-orbit CTI calibration procedures for Euclid.

We present first results from the third GRavitational lEnsing Accuracy Testing (GREAT3) challenge, the third in a sequence of challenges for testing methods of inferring weak gravitational lensing shear distortions from simulated galaxy images. GREAT3 was divided into experiments to test three specific questions, and included simulated space- and ground-based data with constant or cosmologically-varying shear fields. The simplest (control) experiment included parametric galaxies with a realistic distribution of signal-to-noise, size, and ellipticity, and a complex point spread function (PSF). The other experiments tested the additional impact of realistic galaxy morphology, multiple exposure imaging, and the uncertainty about a spatially-varying PSF; the last two questions will be explored in Paper II. The 24 participating teams competed to estimate lensing shears to within systematic error tolerances for upcoming Stage-IV dark energy surveys, making 1525 submissions overall. GREAT3 saw considerable variety and innovation in the types of methods applied. Several teams now meet or exceed the targets in many of the tests conducted (to within the statistical errors). We conclude that the presence of realistic galaxy morphology in simulations changes shear calibration biases by $\sim 1$ per cent for a wide range of methods. Other effects such as truncation biases due to finite galaxy postage stamps, and the impact of galaxy type as measured by the S\'{e}rsic index, are quantified for the first time. Our results generalize previous studies regarding sensitivities to galaxy size and signal-to-noise, and to PSF properties such as seeing and defocus. Almost all methods' results support the simple model in which additive shear biases depend linearly on PSF ellipticity.

Current constraints on dark matter density profiles from weak lensing are typically limited to radial scales greater than 50-100 kpc. In this paper, we explore the possibility of probing the very inner regions of galaxy/halo density profiles by measuring stacked weak lensing on scales of only a few tens of kpc. Our forecasts focus on scales smaller than the equality radius (Req) where the stellar component and the dark matter component contribute equally to the lensing signal. We compute the evolution of Req as a function of lens stellar mass and redshift and show that Req=7-34 kpc for galaxies with the stellar mass of 10^{9.5}-10^{11.5} solar masses. Unbiased shear measurements will be challenging on these scales. We introduce a simple metric to quantify how many source galaxies overlap with their neighbours and for which shear measurements will be challenging. Rejecting source galaxies with close-by companions results in about a 20 per cent decrease in the overall source density. Despite this decrease, we show that Euclid and WFIRST will be able to constrain galaxy/halo density profiles at Req with signal-to-noise ratio >20 for the stellar mass of >10^{10} solar masses. Weak lensing measurements at Req, in combination with stellar kinematics on smaller scales, will be a powerful means by which to constrain both the inner slope of the dark matter density profile as well as the mass and redshift dependence of the stellar initial mass function.

The GRavitational lEnsing Accuracy Testing 3 (GREAT3) challenge is the third in a series of image analysis challenges, with a goal of testing and facilitating the development of methods for analyzing astronomical images that will be used to measure weak gravitational lensing. This measurement requires extremely precise estimation of very small galaxy shape distortions, in the presence of far larger intrinsic galaxy shapes and distortions due to the blurring kernel caused by the atmosphere, telescope optics, and instrumental effects. The GREAT3 challenge is posed to the astronomy, machine learning, and statistics communities, and includes tests of three specific effects that are of immediate relevance to upcoming weak lensing surveys, two of which have never been tested in a community challenge before. These effects include realistically complex galaxy models based on high-resolution imaging from space; spatially varying, physically-motivated blurring kernel; and combination of multiple different exposures. To facilitate entry by people new to the field, and for use as a diagnostic tool, the simulation software for the challenge is publicly available, though the exact parameters used for the challenge are blinded. Sample scripts to analyze the challenge data using existing methods will also be provided. See http://great3challenge.info and http://great3.projects.phys.ucl.ac.uk/leaderboard/ for more information.

Extremely accurate shape measurements of galaxy images are needed to probe dark energy properties with weak gravitational lensing surveys. To increase survey area with a fixed observing time and pixel count, images from surveys such as the Wide Field Infrared Survey Telescope (WFIRST) or Euclid will necessarily be undersampled and therefore distorted by aliasing. Oversampled, unaliased images can be obtained by combining multiple, dithered exposures of the same source with a suitable reconstruction algorithm. Any such reconstruction must minimally distort the reconstructed images for weak lensing analyses to be unbiased. In this paper, we use the IMage COMbination (IMCOM) algorithm of Rowe, Hirata, and Rhodes to investigate the effect of image combination on shape measurements (size and ellipticity). We simulate dithered images of sources with varying amounts of ellipticity and undersampling, reconstruct oversampled output images from them using IMCOM, and measure shape distortions in the output. Our simulations show that IMCOM creates no significant distortions when the relative offsets between dithered images are precisely known. Distortions increase with the uncertainty in those offsets but become problematic only with relatively poor astrometric precision. E.g. for images similar to those from the Astrophysics Focused Telescope Asset (AFTA) implementation of WFIRST, combining eight undersampled images (sampling ratio Q=1) with highly pessimistic uncertainty in astrometric registration (\sigma_d~10^{-3} pixels) yields an RMS shear error of O(10^{-4}). Our analysis pipeline is adapted from that of the Precision Projector Laboratory -- a joint project between NASA Jet Propulsion Laboratory and Caltech which characterizes image sensors using laboratory emulations of astronomical data.

The discovery of cosmic acceleration has inspired ambitious experimental and observational efforts to understand its origin. Many of these take the form of large astronomical surveys, sometimes using new, special-purpose instrumentation, and in some cases entirely new facilities. This Report summarizes some of the major ongoing and planned dark energy experiments, focusing on those in which the U.S. community has a leading or significant supporting role. It provides background information for other Reports from the "Dark Energy and CMB" working group of the APS Division of Particles and Fields long-term planning exercise. We provide 1-2 page summaries of the SDSS-III Baryon Oscillation Spectroscopic Survey (BOSS) and its SDSS-IV successor eBOSS, the Dark Energy Survey (DES), the Subaru Hyper-Suprime Camera (HSC) and Prime Focus Spectrograph (PFS), the Hobby-Eberley Telescope Dark Energy Experiment (HEDTEX), the Dark Energy Spectroscopic Instrument (DESI), the Large Synpotic Survey Telescope (LSST), and the Euclid and AFTA-WFIRST (Wide Field Infrared Survey Telescope) space missions. Over the next one to two decades, these experiments seek to improve the precision of measurements of the cosmic expansion history and cosmic structure growth by factors of 10-100, while simultaneously increasing their redshift range and tightening control and cross-checks of sytematic effects. These measurements will dramatically improve the empirical constraints on theoretical explanations of cosmic acceleration and could lead to breakthroughs in our understanding of the nature of gravity and spacetime or the forms of energy present in the universe.

Weak gravitational lensing observations are a key science driver for the NASA Wide Field Infrared Survey Telescope (WFIRST). To validate the performance of the WFIRST infrared detectors, we have performed a laboratory emulation of weak gravitational lensing measurements. Our experiments used a custom precision projector system to image a target mask composed of a grid of pinholes, emulating stellar point sources, onto a 1.7 micron cut-off Teledyne HgCdTe/H2RG detector. We used a 880nm LED illumination source and f/22 pupil stop to produce undersampled point spread functions similar to those expected from WFIRST. We also emulated the WFIRST image reconstruction strategy, using the IMage COMbination (IMCOM) algorithm to derive oversampled images from dithered, undersampled input images. We created shear maps for this data and computed shear correlation functions to mimic a real weak lensing analysis. After removing only 2nd order polynomial fits to the shear maps, we found that the correlation functions could be reduced to O(10^-6). This places a conservative upper limit on the detector-induced bias to the correlation function (under our test conditions). This bias is two orders of magnitude lower than the expected weak lensing signal. Restricted to scales relevant to dark energy analyses (sky separations > 0.5 arcmin), the bias is O(10^-7): comparable to the requirement for future weak lensing missions to avoid biasing cosmological parameter estimates. Our experiment will need to be upgraded and repeated under different configurations to fully characterize the shape measurement performance of WFIRST IR detectors.

The scaling between X-ray observables and mass for galaxy clusters and groups is instrumental for cluster based cosmology and an important probe for the thermodynamics of the intracluster gas. We calibrate a scaling relation between the weak lensing mass and X-ray spectroscopic temperature for 10 galaxy groups in the COSMOS field, combined with 55 higher mass clusters from the literature. The COSMOS data includes HST imaging and redshift measurements of 46 source galaxies per square arcmin, enabling us to perform unique weak lensing measurements of low mass systems. Our sample extends the mass range of the lensing calibrated M-T relation an order of magnitude lower than any previous study, resulting in a power-law slope of 1.48$^{+0.13}_{-0.09}$. The slope is consistent with the self-similar model, predictions from simulations, and observations of clusters. However, X-ray observations relying on mass measurements derived under the assumption of hydrostatic equilibrium have indicated that masses at group scales are lower than expected. Both simulations and observations suggest that hydrostatic mass measurements can be biased low. Our external weak lensing masses provides the first observational support for hydrostatic mass bias at group level, showing an increasing bias with decreasing temperature and reaching a level of 30-50% at 1 keV.

We present a simulation analysis of weak gravitational lensing flexion and shear measurement using shapelet decomposition, and identify differences between flexion and shear measurement noise in deep survey data. Taking models of galaxies from the Hubble Space Telescope Ultra Deep Field (HUDF) and applying a correction for the HUDF point spread function we generate lensed simulations of deep, optical imaging data from Hubble's Advanced Camera for Surveys (ACS), with realistic galaxy morphologies. We find that flexion and shear estimates differ in our measurement pipeline: whereas intrinsic galaxy shape is typically the dominant contribution to noise in shear estimates, pixel noise due to finite photon counts and detector read noise is a major contributor to uncertainty in flexion estimates, across a broad range of galaxy signal-to-noise. This pixel noise also increases more rapidly as galaxy signal-to-noise decreases than is found for shear estimates. We provide simple power law fitting functions for this behaviour, for both flexion and shear, allowing the effect to be properly accounted for in future forecasts for flexion measurement. Using the simulations we also quantify the systematic biases of our shapelet flexion and shear measurement pipeline for deep Hubble data sets such as Galaxy Evolution from Morphology and SEDs, Space Telescope A901/902 Galaxy Evolution Survey or the Cosmic Evolution Survey. Flexion measurement biases are found to be significant but consistent with previous studies.

We use measurements of the stellar mass function, galaxy clustering, and galaxy-galaxy lensing within the COSMOS survey to constrain the stellar-to-halo mass relation (SHMR) of star forming and quiescent galaxies over the redshift range z=[0.2,1.0]. For massive galaxies, M*>~10^10.6 Msol, our results indicate that star-forming galaxies grow proportionately as fast as their dark matter halos while quiescent galaxies are outpaced by dark matter growth. At lower masses, there is minimal difference in the SHMRs, implying that the majority low-mass quiescent galaxies have only recently been quenched of their star formation. Our analysis also affords a breakdown of all COSMOS galaxies into the relative numbers of central and satellite galaxies for both populations. At z=1, satellite galaxies dominate the red sequence below the knee in the stellar mass function. But the number of quiescent satellites exhibits minimal redshift evolution; all evolution in the red sequence is due to low-mass central galaxies being quenched of their star formation. At M*~10^10 Msol, the fraction of central galaxies on the red sequence increases by a factor of ten over our redshift baseline, while the fraction of quenched satellite galaxies at that mass is constant with redshift. We define a "migration rate" to the red sequence as the time derivative of the passive galaxy abundances. We find that the migration rate of central galaxies to the red sequence increases by nearly an order of magnitude from z=1 to z=0. These results imply that the efficiency of quenching star formation for centrals is increasing with cosmic time, while the mechanisms that quench the star formation of satellite galaxies in groups and clusters is losing efficiency.

This paper describes the definition of a typical next-generation space-based weak gravitational lensing experiment. We first adopt a set of top-level science requirements from the literature, based on the scale and depth of the galaxy sample, and the avoidance of systematic effects in the measurements which would bias the derived shear values. We then identify and categorise the contributing factors to the systematic effects, combining them with the correct weighting, in such a way as to fit within the top-level requirements. We present techniques which permit the performance to be evaluated and explore the limits at which the contributing factors can be managed. Besides the modelling biases resulting from the use of weighted moments, the main contributing factors are the reconstruction of the instrument point spread function (PSF), which is derived from the stellar images on the image, and the correction of the charge transfer inefficiency (CTI) in the CCD detectors caused by radiation damage.

The spatial variation of the colour of a galaxy may introduce a bias in the measurement of its shape if the PSF profile depends on wavelength. We study how this bias depends on the properties of the PSF and the galaxies themselves. The bias depends on the scales used to estimate the shape, which may be used to optimise methods to reduce the bias. Here we develop a general approach to quantify the bias. Although applicable to any weak lensing survey, we focus on the implications for the ESA Euclid mission. Based on our study of synthetic galaxies we find that the bias is a few times 10^-3 for a typical galaxy observed by Euclid. Consequently, it cannot be neglected and needs to be accounted for. We demonstrate how one can do so using spatially resolved observations of galaxies in two filters. We show that HST observations in the F606W and F814W filters allow us to model and reduce the bias by an order of magnitude, sufficient to meet Euclid's scientific requirements. The precision of the correction is ultimately determined by the number of galaxies for which spatially-resolved observations in at least two filters are available. We use results from the Millennium Simulation to demonstrate that archival HST data will be sufficient for the tomographic cosmic shear analysis with the Euclid dataset.

The first half of this paper explores the origin of systematic biases in the measurement of weak gravitational lensing. Compared to previous work, we expand the investigation of PSF instability and fold in for the first time the effects of non-idealities in electronic imaging detectors and imperfect galaxy shape measurement algorithms. Together, these now explain the additive A(l) and multiplicative M(l) systematics typically reported in current lensing measurements. We find that overall performance is driven by a product of a telescope/camera's *absolute performance*, and our *knowledge about its performance*. The second half of this paper propagates any residual shear measurement biases through to their effect on cosmological parameter constraints. Fully exploiting the statistical power of Stage IV weak lensing surveys will require additive biases A<1.8e-12 and multiplicative biases M<4.0e-3. These can be allocated between individual budgets in hardware, calibration data and software, using results from the first half of the paper. If instrumentation is stable and well-calibrated, we find extant shear measurement software from GREAT10 already meet requirements on galaxies detected at S/N=40. Averaging over a population of galaxies with a realistic distribution of sizes, it also meets requirements for a 2D cosmic shear analysis from space. If used on fainter galaxies or for 3D cosmic shear tomography, existing algorithms would need calibration on simulations to avoid introducing bias at a level similar to the statistical error. Requirements on hardware and calibration data are discussed in more detail in a companion paper. Our analysis is intentionally general, but is specifically being used to drive the hardware and ground segment performance budget for the design of the European Space Agency's recently-selected Euclid mission.

We report on the detection of gravitational lensing magnification by a population of galaxy groups, at a significance level of 4.9 sigma. Using X-ray selected groups in the COSMOS 1.64 deg^2 field, and high-redshift Lyman break galaxies as sources, we measure a lensing-induced angular cross-correlation between the samples. After satisfying consistency checks that demonstrate we have indeed detected a magnification signal, and are not suffering from contamination by physical overlap of samples, we proceed to implement an optimally weighted cross-correlation function to further boost the signal to noise of the measurement. Interpreting this optimally weighted measurement allows us to study properties of the lensing groups. We model the full distribution of group masses using a composite-halo approach, considering both the singular isothermal sphere and Navarro-Frenk-White profiles, and find our best fit values to be consistent with those recovered using the weak-lensing shear technique. We argue that future weak-lensing studies will need to incorporate magnification along with shear, both to reduce residual systematics and to make full use of all available source information, in an effort to maximize scientific yield of the observations.

Using observations in the COSMOS field, we report an intriguing correlation between the star formation activity of massive (~10^{11.4}\msol) central galaxies, their stellar masses, and the large-scale (~10 Mpc) environments of their group-mass (~10^{13.6}\msol) dark matter halos. Probing the redshift range z=[0.2,1.0], our measurements come from two independent sources: an X-ray detected group catalog and constraints on the stellar-to-halo mass relation derived from a combination of clustering and weak lensing statistics. At z=1, we find that the stellar mass in star-forming centrals is a factor of two less than in passive centrals at the same halo mass. This implies that the presence or lack of star formation in group-scale centrals cannot be a stochastic process. By z=0, the offset reverses, probably as a result of the different growth rates of these objects. A similar but weaker trend is observed when dividing the sample by morphology rather than star formation. Remarkably, we find that star-forming centrals at z~1 live in groups that are significantly more clustered on 10 Mpc scales than similar mass groups hosting passive centrals. We discuss this signal in the context of halo assembly and recent simulations, suggesting that star-forming centrals prefer halos with higher angular momentum and/or formation histories with more recent growth; such halos are known to evolve in denser large-scale environments. If confirmed, this would be evidence of an early established link between the assembly history of halos on large scales and the future properties of the galaxies that form inside them.