
Automatic Term Extraction deals with the extraction of terminology from a
domain specific corpus, and has long been an established research area in data
and knowledge acquisition. ATE remains a challenging task as it is known that
there is no existing ATE methods that can consistently outperform others in any
domain. This work adopts a refreshed perspective to this problem: instead of
searching for such a 'onesizefitall' solution that may never exist, we
propose to develop generic methods to 'enhance' existing ATE methods. We
introduce SemReRank, the first method based on this principle, to incorporate
semantic relatedness  an often overlooked venue  into an existing ATE method
to further improve its performance. SemReRank incorporates word embeddings
into a personalised PageRank process to compute 'semantic importance' scores
for candidate terms from a graph of semantically related words (nodes), which
are then used to revise the scores of candidate terms computed by a base ATE
algorithm. Extensively evaluated with 13 stateoftheart base ATE methods on
four datasets of diverse nature, it is shown to have achieved widespread
improvement over all base methods and across all datasets, with up to 15
percentage points when measured by the Precision in the top ranked K candidate
terms (the average for a set of K's), or up to 28 percentage points in F1
measured at a K that equals to the expected real terms in the candidates (F1 in
short). Compared to an alternative approach built on the wellknown TextRank
algorithm, SemReRank can potentially outperform by up to 8 points in Precision
at top K, or up to 17 points in F1.

Renewable energy assisted heterogeneous networks can improve system capacity
and reduce conventional energy consumption. In this paper, we propose a
semiMarkov decision process (SMDP)based downlink packet scheduling scheme for
solar energy assisted heterogeneous networks (HetNets), where solar radiation
is modeled as a continuoustime Markov chain (CTMC) and the arrivals of
multiclass downlink packets are modeled as Poisson processes. The proposed
downlink packet scheduling scheme can be compatible with the mainstream
wireless packet networks such as longterm evolution (LTE) networks and the
fifthgeneration (5G) networks because the SMDP is a realtime admission
control model. To obtain an asymptotically optimal downlink packet scheduling
policy, we solve the semiMarkov decision problem using the relative value
iteration algorithm under average criterion and the value iteration algorithm
under discounted criterion, respectively. The simulation results show that the
average cost of the SMDPbased packet scheduling scheme is less than that of
the greedy packet scheduling scheme.

Inspired by the recent measurements on twobody nonleptonic $J/{\psi}$ weak
decay at BESIII, the charmchanging $J/{\psi}$ ${\to}$ $D_{s,d}V$ weak decays
are studied with perturbative QCD approach, where $V$ denotes ${\rho}$ and
$K^{\ast}$ vector mesons. It is found that branching ratio for $J/{\psi}$
${\to}$ $D_{s}{\rho}$ decay can reach up to ${\cal O}(10^{9})$, which is
within the potential measurement capability of the future highluminosity
experiments.

Besides the conventional strong and electromagnetic decay modes, the
$J/{\psi}$ particle can also decay via the weak interaction in the standard
model. In this paper, nonleptonic $J/{\psi}$ ${\to}$ $D_{s,d}{\pi}$, $D_{s,d}K$
weak decays, corresponding to the externally emitted virtual $W$ boson process,
are investigated with the perturbative QCD approach. It is found that branching
ratio for the Cabibbofavored $J/{\psi}$ ${\to}$ $D_{s}{\pi}$ decay can reach
up to ${\cal O}(10^{10})$, which might be potentially measurable at the future
highluminosity experiments.

With the recent development of localization and tracking systems for both
indoor and outdoor settings, we consider the problem of sensing, representing
and analyzing human movement trajectories that we expect to gather in the near
future. In this paper, we propose to use the topological representation, which
records how a target moves around the natural obstacles in the underlying
environment. We demonstrate that the topological information can be
sufficiently descriptive for many applications and efficient enough for
storing, comparing and classifying these natural human trajectories. We
preprocess the sensor network with a purely decentralized algorithm such that
certain edges are given numerical weights. Then we can perform trajectory
classification by simply summing up the edge weights along the trajectory. Our
method supports realtime classification of trajectories with minimum
communication cost. We test the effectiveness of our approach by showing how to
classify randomly generated trajectories in a multilevel arts museum layout as
well as how to distinguish real world taxi trajectories in a large city.

The $\bar{B}_{q}^{\ast}$ ${\to}$ $DP$, $DV$ weak decays are studied with the
perturbative QCD approach, where $q$ $=$ $u$, $d$ and $s$; $P$ and $V$ denote
the ground $SU(3)$ pseudoscalar and vector meson nonet. It is found that the
branching ratios for the colorallowed $\bar{B}_{q}^{\ast}$ ${\to}$
$D_{q}{\rho}^{}$ decays can reach up to $10^{9}$ or more, and should be
promisingly measurable at the running LHC and forthcoming SuperKEKB experiments
in the near future.

Robot Coverage Path planning (i.e., provide full coverage of a given domain
by one or multiple robots) is a classical problem in the field of robotics and
motion planning. The goal is to provide nearly full coverage while also
minimize duplicately visited area. In this paper we focus on the scenario of
path planning on general surfaces including planar domains with complex
topology, complex terrain or general surface in 3D space. The main idea is to
adopt a natural, intrinsic and global parametrization of the surface for robot
path planning, namely the holomorphic quadratic differentials. Except for a
small number of zero points (singularities), each point on the surface is given
a uvcoordinates naturally represented by a complex number. We show that
natural, efficient robot paths can be obtained by using such coordinate
systems. The method is based on intrinsic geometry and thus can be adapted to
general surface exploration in 3D.

Halo distribution is a key topic for background study. This paper has
developed an analytical method to give an estimation of ATF beam halo
distribution. The equilibrium particle distribution of the beam tail in the ATF
damping ring is calculated analytically with different emittance and different
vacuum degree. The analytical results agree the measurements very well. This is
a general method which can be applied to any electron rings.

In order to study the background status in the ATF2 beam line and the
interaction point (IP), this paper developed an analytical method to give the
estimation of ATF beam halo distribution based on K. Hirata and K. Yokoya's
theory. The equilibrium particle distribution of beam tail in ATF damping ring,
when each electron is being affected by, in addition to the synchrotron
radiation damping effects, several stochastic processes, such as beamgas
scattring, beamgas bremsstrahlung and intrabeam scattering, was presented.
This method is common and can be applied on other electron rings.

We consider the problem of capacitated kinetic clustering in which $n$ mobile
terminals and $k$ base stations with respective operating capacities are given.
The task is to assign the mobile terminals to the base stations such that the
total squared distance from each terminal to its assigned base station is
minimized and the capacity constraints are satisfied. This paper focuses on the
development of \emph{distributed} and computationally efficient algorithms that
adapt to the motion of both terminals and base stations. Suggested by the
optimal transportation theory, we exploit the structural property of the
optimal solution, which can be represented by a power diagram on the base
stations such that the total usage of nodes within each power cell equals the
capacity of the corresponding base station. We show by using the kinetic data
structure framework the first analytical upper bound on the number of changes
in the optimal solution, i.e., its stability. On the algorithm side, using the
power diagram formulation we show that the solution can be represented in size
proportional to the number of base stations and can be solved by an iterative,
local algorithm. In particular, this algorithm can naturally exploit the
continuity of motion and has orders of magnitude faster than existing solutions
using mincost matching and linear programming, and thus is able to handle
large scale data under mobility.

Circular ElectronPositron Collider(CEPC) is one of the largest plans in high
energy physics study at China, which would serve as Higgs Factory firstly and
then upgrade to a hadron collider. In this paper we give the 50km and 100km
design in both single ring and double ring schemes, including $Z$ boson and $W$
boson and Higgs boson by using the optimized method. Also, we give the
potential of CEPC running at $Z$ and $W$ poles. And we analysis the
relationship of luminosity with circumference and filling factor, which gives a
way to evaluate the choice of geometry. What's more, we compare the nominal
performance of CEPCSPPC and LHC and FCC.

In this paper we will show a cavity and higher order mode (HOM) coupler
designing scheme for the Circular ElectronPositron Collider (CEPC) main ring.
The cavity radio frequency (RF) design parameters are showed in this paper. The
HOM power is calculated based on the beam parameters in the Preliminary
Conceptual Design Report (PreCDR). The damping results of the higher order
modes (HOMs) and same order modes (SOMs) show that they are reached the damping
requirements for beam stability.

Several aspects of managing a sensor network (e.g., motion planning for data
mules, serial data fusion and inference) benefit once the network is linearized
to a path. The linearization is often achieved by constructing a space filling
curve in the domain. However, existing methods cannot handle networks
distributed on surfaces of complex topology. This paper presents a novel method
for generating space filling curves for 3D sensor networks that are distributed
densely on some twodimensional geometric surface. Our algorithm is completely
distributed and constructs a path which gets uniformly, progressively denser as
it becomes longer. We analyze the algorithm mathematically and prove that the
curve we obtain is dense. Our method is based on the Hodge decomposition
theorem and uses holomorphic differentials on Riemann surfaces. The underlying
high genus surface is conformally mapped to a union of flat tori and then a
proportionallydense space filling curve on this union is constructed. The
pullback of this curve to the original network gives us the desired curve.

Following the discovery of the Higgs boson at LHC, new large colliders are
being studied by the international highenergy community to explore Higgs
physics in detail and new physics beyond the Standard Model. In China, a
twostage circular collider project CEPCSPPC is proposed, with the first stage
CEPC (Circular Electron Positron Collier, a socalled Higgs factory) focused on
Higgs physics, and the second stage SPPC (Super ProtonProton Collider) focused
on new physics beyond the Standard Model. This paper discusses this second
stage.

We present an analytical nonlocal effective medium approximation to describe
the optical nonlocal effects in metallic nanorod metamaterials based on Mie
scattering theory. It is shown that the developed nonlocal effective medium
theory can predict a coexistence state of two modes around the
epsilonnearzero region, where strong optical nonlocal effects lead to the
behavior of both positive refraction and negative refraction in the nanorod
metamaterials. Outside of the coexistence region, only one mode can be excited
and its behavior can be well described using the local effective medium theory.

The optical nonlocality in symmetric metaldielectric multilayer
metamaterials is theoretically and experimentally investigated with respect to
transversemagneticpolarized incident light. A nonlocal effective medium
theory is derived from the transfermatrix method to determine the nonlocal
effective permittivity depending on both the frequency and wave vector in a
symmetric metaldielectric multilayer stack. In contrast to the local effective
medium theory, our proposed nonlocal effective medium theory can accurately
predict measured incident angledependent reflection spectra from a fabricated
multilayer stack and provide nonlocal dispersion relations. Moreover, the bulk
plasmon polaritons with large wave vectors supported in the multilayer stack
are also investigated with the nonlocal effective medium theory through the
analysis of the dispersion relation and eigenmode.

Let $P$ be a set of $n$ points in $\mathrm{R}^2$, and let $\mathrm{DT}(P)$
denote its Euclidean Delaunay triangulation. We introduce the notion of an edge
of $\mathrm{DT}(P)$ being {\it stable}. Defined in terms of a parameter
$\alpha>0$, a Delaunay edge $pq$ is called $\alpha$stable, if the (equal)
angles at which $p$ and $q$ see the corresponding Voronoi edge $e_{pq}$ are at
least $\alpha$. A subgraph $G$ of $\mathrm{DT}(P)$ is called {\it $(c\alpha,
\alpha)$stable Delaunay graph} ($\mathrm{SDG}$ in short), for some constant $c
\ge 1$, if every edge in $G$ is $\alpha$stable and every $c\alpha$stable of
$\mathrm{DT}(P)$ is in $G$.
We show that if an edge is stable in the Euclidean Delaunay triangulation of
$P$, then it is also a stable edge, though for a different value of $\alpha$,
in the Delaunay triangulation of $P$ under any convex distance function that is
sufficiently close to the Euclidean norm, and viceversa. In particular, a
$6\alpha$stable edge in $\mathrm{DT}(P)$ is $\alpha$stable in the Delaunay
triangulation under the distance function induced by a regular $k$gon for $k
\ge 2\pi/\alpha$, and viceversa. Exploiting this relationship and the analysis
in~\cite{polydel}, we present a linearsize kinetic data structure (KDS) for
maintaining an $(8\alpha,\alpha)$$\mathrm{SDG}$ as the points of $P$ move. If
the points move along algebraic trajectories of bounded degree, the KDS
processes nearly quadratic events during the motion, each of which can
processed in $O(\log n)$ time. Finally, we show that a number of useful
properties of $\mathrm{DT}(P)$ are retained by $\mathrm{SDG}$ of $P$.

In this paper we showed a systematic method of appropriate parameter choice
for a circular pp collider by using analytical expression of beambeam tune
shift limit started from given design goal and technical limitations. A
parameter space has been explored. Based on parameters scan and considerations
from RF systems, a set of appropriate parameter designed for a 50Km and a 100Km
circular protonproton collider was proposed.

In cavities, there exists not only the fundamental mode which is used to
accelerate the beam but also higher order modes (HOMs). The higher order modes
excited by beam can seriously affect beam quality, especially for the higher
R/Q modes. This paper reports on measured results of higher order modes in the
IHEP02 1.3GHz lowloss 9cell superconducting cavity. Using different methods,
Qe of the dangerous modes passbands have been got. The results are compared
with TESLA cavity results. R/Q of the first three passbands have also been got
by simulation and compared with the results of TESLA cavity.

Extremely anisotropic metaldielectric multilayer metamaterials are designed
to have the effective permittivity tensor of a transverse component (parallel
to the interfaces of the multilayer) with zero real part and a longitudinal
component (normal to the interfaces of the multilayer) with ultralarge
imaginary part at the same wavelength, including the optical nonlocality
analysis based on the transfermatrix method. The diffractionfree
deepsubwavelength optical beam propagation with nearzero phase variation in
the designed multilayer stack due to the nearflat isofrequency contour is
demonstrated and analyzed, including the effects of the multilayer period and
the material loss.

Analysis of Internet topologies has shown that the Internet topology has
negative curvature, measured by Gromov's "thin triangle condition", which is
tightly related to core congestion and route reliability. In this work we
analyze the discrete Ricci curvature of the Internet, defined by Ollivier, Lin,
etc. Ricci curvature measures whether local distances diverge or converge. It
is a more local measure which allows us to understand the distribution of
curvatures in the network. We show by various Internet data sets that the
distribution of Ricci cuvature is spread out, suggesting the network topology
to be nonhomogenous. We also show that the Ricci curvature has interesting
connections to both local measures such as node degree and clustering
coefficient, global measures such as betweenness centrality and network
connectivity, as well as auxilary attributes such as geographical distances.
These observations add to the richness of geometric structures in complex
network theory.

Complex contagions describe diffusion of behaviors in a social network in
settings where spreading requires the influence by two or more neighbors. In a
$k$complex contagion, a cluster of nodes are initially infected, and
additional nodes become infected in the next round if they have at least $k$
already infected neighbors. It has been argued that complex contagions better
model behavioral changes such as adoption of new beliefs, fashion trends or
expensive technology innovations. This has motivated rigorous understanding of
spreading of complex contagions in social networks. Despite simple contagions
($k=1$) that spread fast in all small world graphs, how complex contagions
spread is much less understood. Previous work~\cite{Ghasemiesfeh:2013:CCW}
analyzes complex contagions in Kleinberg's small world
model~\cite{kleinberg00small} where edges are randomly added according to a
spatial distribution (with exponent $\gamma$) on top of a two dimensional grid
structure. It has been shown in~\cite{Ghasemiesfeh:2013:CCW} that the speed of
complex contagions differs exponentially when $\gamma=0$ compared to when
$\gamma=2$.
In this paper, we fully characterize the entire parameter space of $\gamma$
except at one point, and provide upper and lower bounds for the speed of
$k$complex contagions. We study two subtly different variants of Kleinberg's
small world model and show that, with respect to complex contagions, they
behave differently. For each model and each $k \geq 2$, we show that there is
an intermediate range of values, such that when $\gamma$ takes any of these
values, a $k$complex contagion spreads quickly on the corresponding graph, in
a polylogarithmic number of rounds. However, if $\gamma$ is outside this range,
then a $k$complex contagion requires a polynomial number of rounds to spread
to the entire network.

In this paper, we study the spreading speed of complex contagions in a social
network. A $k$complex contagion starts from a set of initially infected seeds
such that any node with at least $k$ infected neighbors gets infected. Simple
contagions, i.e., $k=1$, quickly spread to the entire network in small world
graphs. However, fast spreading of complex contagions appears to be less likely
and more delicate; the successful cases depend crucially on the network
structure~\cite{G08,Ghasemiesfeh:2013:CCW}.
Our main result shows that complex contagions can spread fast in a general
family of timeevolving networks that includes the preferential attachment
model~\cite{barabasi99emergence}. We prove that if the initial seeds are chosen
as the oldest nodes in a network of this family, a $k$complex contagion covers
the entire network of $n$ nodes in $O(\log n)$ steps. We show that the choice
of the initial seeds is crucial. If the initial seeds are uniformly randomly
chosen in the PA model, even with a polynomial number of them, a complex
contagion would stop prematurely. The oldest nodes in a preferential attachment
model are likely to have high degrees. However, we remark that it is actually
not the power law degree distribution per se that facilitates fast spreading of
complex contagions, but rather the evolutionary graph structure of such models.
Some members of the said family do not even have a powerlaw distribution.
We also prove that complex contagions are fast in the copy
model~\cite{KumarRaRa00}, a variant of the preferential attachment family.
Finally, we prove that when a complex contagion starts from an arbitrary set
of initial seeds on a general graph, determining if the number of infected
vertices is above a given threshold is $\mathbf{P}$complete. Thus, one cannot
hope to categorize all the settings in which complex contagions percolate in a
graph.

The role of the ILC final focus system (FFS) is to demagnify the beam to the
sizes at the IP required to meet the ILC luminosity goals. The current design
of final focus performs perfect chromaticity correction in both horizontal and
vertical planes. Based on this design a set of alternative optical
configurations were studied in which the horizontal beam size at the IP is
increased while at the same time the vertical one is decreased, with the goal
of reducing beamsstrahlung emission. Luminosity reduction due to the hour glass
effect must be considered because betay*/sigmaz* becomes much smaller in this
case. The beambeam interaction simulation by Guineapig++ was used for
evaluation. Reduced bunch lengths are used to make sure that the obtained
luminosities are not lower than those of the ILC original (nominal)
configuration.

Broadband electromagnetic transparency phenomenon is realized with a
welldesigned gradedpermittivity sphere, which has an extremely low scattering
cross section over a wide frequency range, based on the generalized Mie
scattering theory and numerical simulation in fullwave condition. The dynamic
polarization cancellation is revealed by studying the variation of the
polarization with respect to the frequency. Furthermore, a properlydesigned
multishell sphere is also proposed and examined in order to reduce the
rigorous conditions for realizing the broadband transparency in experiments.