• Mach-Zehnder interferometer is a common device in quantum phase estimation and the photon losses in it are an important issue for achieving a high phase accuracy. Here we thoroughly discuss the precision limit of the phase in the Mach-Zehnder interferometer with a coherent state and a superposition of coherent states as input states. By providing a general analytical expression of quantum Fisher information, the phase-matching condition and optimal initial parity are given. Especially, in the photon loss scenario, the sensitivity behaviors are analyzed and specific strategies are provided to restore the phase accuracies for symmetric and asymmetric losses.
  • In this article, a new conceptual biomedical engineering strategy to tackle modern disease challenges, termed as liquid metal enabled electrobiology, is proposed. This generalized and easy going way is based on the physiological fact that specially administrated electricity would induce a series of subsequent desired biological effects, either shortly, transitional or permanently. Owing high compliance within any part of the biological tissues, the liquid metal would aid to mold a pervasive way to treat physiological or psychological diseases. As highly conductive and non-toxic multifunctional flexible materials, such liquid metals (LMs) consist of the core to generate any requested electric treating fields (ETFields) which can adapt to various sites inside the human body. The basic mechanisms of electrobiology in delivering electricity to the target tissues and then inducing expected outputs for disease treatment are interpreted. The methods toward realizing soft and conformable electronics based on liquid metal are illustrated. Further, a group of typical disease challenges were taken to illustrate the basic strategies to perform liquid metal electrobiology therapy, which include but are not limited to: tissue electronics, brain disorder, immunotherapy, neural functional recovery, muscle stimulation, skin rejuvenation, cosmetology and dieting, artificial organs, cardiac pacing and cancer therapy etc. Some practical issues involved in the electrobiology for future disease therapy were discussed. Perspective along this direction to incubate an easy-going biomedical tool for health care was pointed out.
  • Machine reading comprehension (MRC) on real web data usually requires the machine to answer a question by analyzing multiple passages retrieved by search engine. Compared with MRC on a single passage, multi-passage MRC is more challenging, since we are likely to get multiple confusing answer candidates from different passages. To address this problem, we propose an end-to-end neural model that enables those answer candidates from different passages to verify each other based on their content representations. Specifically, we jointly train three modules that can predict the final answer based on three factors: the answer boundary, the answer content and the cross-passage answer verification. The experimental results show that our method outperforms the baseline by a large margin and achieves the state-of-the-art performance on the English MS-MARCO dataset and the Chinese DuReader dataset, both of which are designed for MRC in real-world settings.
  • So far, several macroscopic quantum phenomena have been discovered in the Josephson junction. Through introducing such a structure with a liquid membrane sandwiched between two liquid metal electrodes, we had ever observed a lighting and sound phenomenon which was explained before as discharge plasma. In fact, such an effect also belongs to a quantum process. It is based on this conceiving, we proposed here that an electrically controllable method can thus be established to generate and manipulate as much photonic quantum as desired. We attributed such electrically induced lighting among liquid metal droplets immersed inside aqueous solution as photonic quantum effect. Our experiments clarified that a small electrical voltage would be strong enough to trigger blue-violet light and sound inside the aqueous solution system. Meanwhile, thermal heat is released, and chemical reaction occurs over the solution. From an alternative way which differs from former effort in interpreting such effect as discharge plasma, we treated this process as a quantum one and derived new conceptual equations to theoretically quantify this phenomenon in light of quantum mechanics principle. It can be anticipated that given specific designing, such spontaneously generated tremendous quantum can be manipulated to entangle together which would possibly help mold functional elements for developing future quantum computing or communication system. With superior adaptability than that of the conventional rigid junction, the present electro-photonic quantum generation system made of liquid metal droplets structure could work in solution, room temperature situation and is easy to be adjusted. It suggests a macroscopic way to innovate the classical strategies and technologies in generating quantum as frequently adopted in classical quantum engineering area.
  • Overshadowing the superconducting dome in hole-doped cuprates, the pseudogap state is still one of the mysteries that no consensus can be achieved. It has been shown that the rotational symmetry is broken in this state and may result in a nematic phase transition, whose temperature seems to coincide with the onset temperature of the pseudogap state $T^*$ around optimal doping level, raising the question whether the pseudogap is resulted from the establishment of the nematic order. Here we report results of resistivity measurements under uniaxial pressure on several hole-doped cuprates, where the normalized slope of the elastoresisvity $\zeta$ can be obtained as illustrated in iron-based superconductors. The temperature dependence of $\zeta$ along particular lattice axes exhibits kink feature at $T_{k}$ and shows Curie-Weiss-like behavior above it, which suggests a spontaneous nematic transition. While $T_{k}$ seems to be the same as $T^*$ around optimal doping level, they become different in very underdoped La$_{2-x}$Sr$_{x}$CuO$_4$. Our results suggest that the nematic order is an electronic phase within the pseudogap state.
  • Regulation of material softness has both theoretical and practical significances due to irreplaceable applications of soft matter in rather diverse areas. This article is dedicated to draft a theoretical category on interpreting the mechanisms lying behind all soft matters, which can be termed as Softening Theory. A technical strategy with generalized purpose was proposed for softening desired matter, i.e. the melting point of matter can be significantly reduced through tuning its interior boundaries in atomic level. This theory accords well with the classical nuclear droplet model that treats the nucleus as a droplet which had successfully explained many phenomena. It also explained the experimental fact that, the material's melting point is drastically reduced as the particles become smaller enough, in which situations effects of the atomic borders become much weaker. Along this direction, many phenomena existing in nature can be well understood. For example, if keeping in mind the fact that an atom consisting of nucleus and electronics can be regarded as fluid, all the matter consisted of atoms should maintain fluidic state in their macroscopic scale, according to the consistency between macro and micro worlds. However, many substances just cannot remain their original atomic fluidic behavior due to breaking of the consistency between macro and micro states. Based on the current softening theory, it is now easy to understand that the breaking of such consistency is just caused due to generated forces from the atomic interactions. To resolve such intrinsic confinement, a group of potential technical approaches can be developed to tune the atomic borders of the matter and thus make desired soft materials. This work provides a theoretical foundation to partially address the nature of the material which will aid to make future soft matters in the coming time.
  • We study the magnon spin transport in the magnetic insulator yttrium iron garnet (YIG) in a nonlocal experiment and compare the magnon spin excitation and detection for the heavy metal paramagnetic electrodes platinum (Pt|YIG|Pt) and tantalum (Ta|YIG|Ta). The electrical injection and detection processes rely on the (inverse) spin Hall effect in the heavy metals and the conversion between the electron spin and magnon spin at the heavy metal|YIG interface. Pt and Ta possess opposite signs of the spin Hall angle. Furthermore, their heterostructures with YIG have different interface properties, i.e. spin mixing conductances. By varying the distance between injector and detector, the magnon spin transport is studied. Using a circuit model based on the diffusion-relaxation transport theory, a similar magnon relaxation length of ~ 10 \mu m was extracted from both Pt and Ta devices. By changing the injector and detector material from Pt to Ta, the influence of interface properties on the magnon spin transport has been observed. For Ta devices on YIG the spin mixing conductance is reduced compared with Pt devices, which is quantitatively consistent when comparing the dependence of the nonlocal signal on the injector-detector distance with the prediction from the circuit model.
  • Conventional electrical circuits are generally rigid in their components and working styles which are not flexible and stretchable. From an alternative, liquid metal based soft electronics is offering important opportunities for innovating modern bioelectronics and electrical engineering. However, its running in wet environments such as aqueous solution, biological tissues or allied subjects still encounters many technical challenges. Here, we proposed a new conceptual electrical circuit, termed as droplet circuits, to fulfill the special needs as raised in the above mentioned areas. Such unconventional circuits are immersed in solution and composed of liquid metal droplets, conductive ions or wires such as carbon nanotubes. With specifically designed topological or directional structures/patterns, the liquid metal droplets composing the circuit can be discretely existing and disconnected from each other, while achieving the function of electron transport through conductive routes or quantum tunneling effect. The conductive wires serve as the electron transfer stations when the distance between two separate liquid metal droplets is far beyond than that quantum tunneling effects can support. The unique advantage of the current droplet circuit lies in that it allows parallel electron transport, high flexibility, self-healing, regulativity and multi-point connectivity, without needing to worry about circuit break. This would extend the category of classical electrical circuits into the newly emerging areas like realizing room temperature quantum computing, making brain-like intelligence or nerve-machine interface electronics etc. The mechanisms and potential scientific issues of the droplet circuits are interpreted. Future prospects along this direction are outlined.
  • The iron-based superconductors are characterized by multiple-orbital physics where all the five Fe 3$d$ orbitals get involved. The multiple-orbital nature gives rise to various novel phenomena like orbital-selective Mott transition, nematicity and orbital fluctuation that provide a new route for realizing superconductivity. The complexity of multiple-orbital also asks to disentangle the relationship between orbital, spin and nematicity, and to identify dominant orbital ingredients that dictate superconductivity. The bulk FeSe superconductor provides an ideal platform to address these issues because of its simple crystal structure and unique coexistence of superconductivity and nematicity. However, the orbital nature of the low energy electronic excitations and its relation to the superconducting gap remain controversial. Here we report direct observation of highly anisotropic Fermi surface and extremely anisotropic superconducting gap in the nematic state of FeSe superconductor by high resolution laser-based angle-resolved photoemission measurements. We find that the low energy excitations of the entire hole pocket at the Brillouin zone center are dominated by the single $d_{xz}$ orbital. The superconducting gap exhibits an anti-correlation relation with the $d_{xz}$ spectral weight near the Fermi level, i.e., the gap size minimum (maximum) corresponds to the maximum (minimum) of the $d_{xz}$ spectral weight along the Fermi surface. These observations provide new insights in understanding the orbital origin of the extremely anisotropic superconducting gap in FeSe superconductor and the relation between nematicity and superconductivity in the iron-based superconductors.
  • Chronic disease is a long-lasting condition that can be controlled but not cured. Owing to the portability and continuous action, wearable devices are regarded as promising ways for management and rehabilitation of patients with chronic diseases. Although the monitoring functions of mobile health care are in full swing, the research direction along wearable therapy devices has not been paid with enough attention. The aim of this review paper is to summarize recent developments in the field of wearable devices, with particular focus on specific interpretations of therapy for chronic diseases including diabetes, heart disease, Parkinson's disease, chronic kidney disease and movement disability after neurologic injuries. A brief summary on the key enabling technologies allowing for the implementation of wearable monitoring and therapy devices is given, such as miniaturization of electronic circuits, data analysis techniques, telecommunication strategy and physical therapy etc. For future developments, research directions worth of pursuing are outlined.
  • Few-layer black phosphorus (FLBP), a recently discovered two-dimensional semiconductor, has attracted substantial attention in the scientific and technical communities due to its great potential in electronic and optoelectronic applications. However, reactivity of FLBP flakes with ambient species limits its direct applications. Among various methods to passivate FLBP in ambient environment, nanocomposites mixing FLBP flakes with stable matrix may be one of the most promising approaches for industry applications. Here, we report a simple one-step procedure to mass produce air-stable FLBP/phospholipids nanocomposite in liquid phase. The resultant nanocomposite is found to have ultralow tunneling barrier for charge carriers which can be described by an Efros-Shklovskii variable range hopping mechanism. Devices made from such mass-produced FLBP/phospholipids nanocomposite show highly stable electrical conductivity and opto-electrical response in ambient conditions, indicating its promising applications in both electronic and optoelectronic applications. This method could also be generalized to the mass production of nanocomposites consisting of other air-sensitive two-dimensional materials, such as FeSe, NbSe2, WTe2, etc.
  • Existing methods for arterial blood pressure (BP) estimation directly map the input physiological signals to output BP values without explicitly modeling the underlying temporal dependencies in BP dynamics. As a result, these models suffer from accuracy decay over a long time and thus require frequent calibration. In this work, we address this issue by formulating BP estimation as a sequence prediction problem in which both the input and target are temporal sequences. We propose a novel deep recurrent neural network (RNN) consisting of multilayered Long Short-Term Memory (LSTM) networks, which are incorporated with (1) a bidirectional structure to access larger-scale context information of input sequence, and (2) residual connections to allow gradients in deep RNN to propagate more effectively. The proposed deep RNN model was tested on a static BP dataset, and it achieved root mean square error (RMSE) of 3.90 and 2.66 mmHg for systolic BP (SBP) and diastolic BP (DBP) prediction respectively, surpassing the accuracy of traditional BP prediction models. On a multi-day BP dataset, the deep RNN achieved RMSE of 3.84, 5.25, 5.80 and 5.81 mmHg for the 1st day, 2nd day, 4th day and 6th month after the 1st day SBP prediction, and 1.80, 4.78, 5.0, 5.21 mmHg for corresponding DBP prediction, respectively, which outperforms all previous models with notable improvement. The experimental results suggest that modeling the temporal dependencies in BP dynamics significantly improves the long-term BP prediction accuracy.
  • We study the production of gravitational waves during oscillations of the inflaton around the minimum of a cuspy potential after inflation. We find that a cusp in the potential can trigger copious oscillon formation, which sources a characteristic energy spectrum of gravitational waves with double peaks. The discovery of such a double-peak spectrum could test the underlying inflationary physics.
  • In this study, the ducted propeller has been numerically investigated under oblique flow, which is crucial and challenging for the design and safe operation of thruster driven vessel and dynamic positioning (DP) system. A Reynolds-Averaged Navier-Stokes (RANS) model has been first evaluated in the quasi-steady investigation on a single ducted propeller operating in open water condition, and then a hybrid RANS/LES model is adapted for the transient sliding mesh computations. A representative test geometry considered here is a marine model thruster which is discretized with structured hexahedral cells, and the gap between the blade tip and nozzle is carefully meshed to capture the flow dynamics. The computational results are assessed by a systematic grid convergence study and compared with the available experimental data. As a part of novel contribution, multiple incidence angles from $15^\circ$ to $60^\circ$ have been analyzed with varying advance coefficients. The main emphasis has been placed on the hydrodynamic loads that act on the propeller blades and nozzle as well as their variation with different configurations. The results reveal that while the nozzle absorbs much effort from the oblique flow, the imbalance between blades at different positions is still noticeable. Such unbalance flow dynamics on the blades and the nozzle has a direct implication on the variation of thrust and torque of a marine thruster.
  • The entirely soft and transformable room-temperature liquid metal battery based on 3D hybrid printing was proposed and experimentally demonstrated. Liquid metal gallium and conductive gel were employed as the negative and positive electrode material, respectively. The discharge process of batteries with different structure, single-cell and multi-cell, were clarified. The results indicated that the obtained battery possessed rather stable and persisted discharge property, but the multi-cell battery presented stair-step decrease overtime. SEM and EDS images were obtained to evaluate the morphological change of the electrode during the discharge process, and the liquid metal was found to be easily exposed and active according to the solubility of the alkaline electrolyte to oxidized gallium. The successful 3D hybrid printing allowed different polymers, including PLA, ABS and TPU, to be precisely patterned in any required battery body structures, with liquid electrodes in appropriate specified positions. The flexibility and practicability of this new generation battery was illustrated through working devices. The present soft battery offers important power supply for future wearable and epidermal electronics.
  • Most studies in multiparameter estimation assume the dynamics is fixed and focus on identifying the optimal probe state and the optimal measurements. In practice, however, controls are usually available to alter the dynamics, which provides another degree of freedom. In this paper we employ optimal control methods, particularly the gradient ascent pulse engineering (GRAPE), to design optimal controls for the improvement of the precision limit in multiparameter estimation. We show that the controlled schemes not only capable to provide a higher precision limit, but also have a higher stability to the inaccuracy of the time point performing the measurements. This high time stability will benefit the practical metrology where it is hard to perform the measurement at a very accurate time point due to the response time of the measurement apparatus.
  • Here we report the observation of pressure-induced melting of antiferromagnetic (AFM) order and emergence of a new quantum state in the honeycomb-lattice halide alpha-RuCl3, a candidate compound in the proximity of quantum spin liquid state. Our high-pressure heat capacity measurements demonstrate that the AFM order smoothly melts away at a critical pressure (Pc) of 0.7 GPa. Intriguingly, the AFM transition temperature displays an increase upon applying pressure below the Pc, in stark contrast to usual phase diagrams, for example in pressurized parent compounds of unconventional superconductors. Furthermore, in the high-pressure phase an unusual steady of magnetoresistance is observed. These observations suggest that the high-pressure phase is in an exotic gapped quantum state which is robust against pressure up to ~140 GPa.
  • WTe2 has attracted a great deal of attention because it exhibits extremely large and nonsaturating magnetoresistance. The underlying origin of such a giant magnetoresistance is still under debate. Utilizing laser-based angle-resolved photoemission spectroscopy with high energy and momentum resolutions, we reveal the complete electronic structure of WTe2. This makes it possible to determine accurately the electron and hole concentrations and their temperature dependence. We find that, with increasing the temperature, the overall electron concentration increases while the total hole concentration decreases. It indicates that the electron-hole compensation, if it exists, can only occur in a narrow temperature range, and in most of the temperature range there is an electron-hole imbalance. Our results are not consistent with the perfect electron-hole compensation picture that is commonly considered to be the cause of the unusual magnetoresistance in WTe2. We identified a flat band near the Brillouin zone center that is close to the Fermi level and exhibits a pronounced temperature dependence. Such a flat band can play an important role in dictating the transport properties of WTe2. Our results provide new insight on understanding the origin of the unusual magnetoresistance in WTe2.
  • Recent progress in semantic segmentation has been driven by improving the spatial resolution under Fully Convolutional Networks (FCNs). To address this problem, we propose a Stacked Deconvolutional Network (SDN) for semantic segmentation. In SDN, multiple shallow deconvolutional networks, which are called as SDN units, are stacked one by one to integrate contextual information and guarantee the fine recovery of localization information. Meanwhile, inter-unit and intra-unit connections are designed to assist network training and enhance feature fusion since the connections improve the flow of information and gradient propagation throughout the network. Besides, hierarchical supervision is applied during the upsampling process of each SDN unit, which guarantees the discrimination of feature representations and benefits the network optimization. We carry out comprehensive experiments and achieve the new state-of-the-art results on three datasets, including PASCAL VOC 2012, CamVid, GATECH. In particular, our best model without CRF post-processing achieves an intersection-over-union score of 86.6% in the test set.
  • Liquid metal (LM) is of current core interest for a wide variety of newly emerging areas. However, the functional materials thus made so far by LM only could display a single silver-white appearance. Here in this study, the new conceptual colorful LM marbles working like transformable biomimetic chameleons were proposed and fabricated from LM droplets through encasing them with fluorescent nano-particles. We demonstrated that this unique LM marble can be manipulated into various stable magnificent appearances as one desires. And it can also splitt and merge among different colors. Such multifunctional LM chameleon is capable of responding to the outside electric-stimulus and realizing shape transformation and discoloration behaviors as well. Further more, the electric-stimuli has been disclosed to be an easy going way to trigger the release of nano/micro-particles from the LM. The present fluorescent biomimetic liquid metal chameleon is expected to offer important opportunities for diverse unconventional applications, especially in a wide variety of functional smart material and color changeable soft robot areas.
  • Marco Battaglieri, Alberto Belloni, Aaron Chou, Priscilla Cushman, Bertrand Echenard, Rouven Essig, Juan Estrada, Jonathan L. Feng, Brenna Flaugher, Patrick J. Fox, Peter Graham, Carter Hall, Roni Harnik, JoAnne Hewett, Joseph Incandela, Eder Izaguirre, Daniel McKinsey, Matthew Pyle, Natalie Roe, Gray Rybka, Pierre Sikivie, Tim M. P. Tait, Natalia Toro, Richard Van De Water, Neal Weiner, Kathryn Zurek, Eric Adelberger, Andrei Afanasev, Derbin Alexander, James Alexander, Vasile Cristian Antochi, David Mark Asner, Howard Baer, Dipanwita Banerjee, Elisabetta Baracchini, Phillip Barbeau, Joshua Barrow, Noemie Bastidon, James Battat, Stephen Benson, Asher Berlin, Mark Bird, Nikita Blinov, Kimberly K. Boddy, Mariangela Bondi, Walter M. Bonivento, Mark Boulay, James Boyce, Maxime Brodeur, Leah Broussard, Ranny Budnik, Philip Bunting, Marc Caffee, Sabato Stefano Caiazza, Sheldon Campbell, Tongtong Cao, Gianpaolo Carosi, Massimo Carpinelli, Gianluca Cavoto, Andrea Celentano, Jae Hyeok Chang, Swapan Chattopadhyay, Alvaro Chavarria, Chien-Yi Chen, Kenneth Clark, John Clarke, Owen Colegrove, Jonathon Coleman, David Cooke, Robert Cooper, Michael Crisler, Paolo Crivelli, Francesco D'Eramo, Domenico D'Urso, Eric Dahl, William Dawson, Marzio De Napoli, Raffaella De Vita, Patrick DeNiverville, Stephen Derenzo, Antonia Di Crescenzo, Emanuele Di Marco, Keith R. Dienes, Milind Diwan, Dongwi Handiipondola Dongwi, Alex Drlica-Wagner, Sebastian Ellis, Anthony Chigbo Ezeribe, Glennys Farrar, Francesc Ferrer, Enectali Figueroa-Feliciano, Alessandra Filippi, Giuliana Fiorillo, Bartosz Fornal, Arne Freyberger, Claudia Frugiuele, Cristian Galbiati, Iftah Galon, Susan Gardner, Andrew Geraci, Gilles Gerbier, Mathew Graham, Edda Gschwendtner, Christopher Hearty, Jaret Heise, Reyco Henning, Richard J. Hill, David Hitlin, Yonit Hochberg, Jason Hogan, Maurik Holtrop, Ziqing Hong, Todd Hossbach, T. B. Humensky, Philip Ilten, Kent Irwin, John Jaros, Robert Johnson, Matthew Jones, Yonatan Kahn, Narbe Kalantarians, Manoj Kaplinghat, Rakshya Khatiwada, Simon Knapen, Michael Kohl, Chris Kouvaris, Jonathan Kozaczuk, Gordan Krnjaic, Valery Kubarovsky, Eric Kuflik, Alexander Kusenko, Rafael Lang, Kyle Leach, Tongyan Lin, Mariangela Lisanti, Jing Liu, Kun Liu, Ming Liu, Dinesh Loomba, Joseph Lykken, Katherine Mack, Jeremiah Mans, Humphrey Maris, Thomas Markiewicz, Luca Marsicano, C. J. Martoff, Giovanni Mazzitelli, Christopher McCabe, Samuel D. McDermott, Art McDonald, Bryan McKinnon, Dongming Mei, Tom Melia, Gerald A. Miller, Kentaro Miuchi, Sahara Mohammed Prem Nazeer, Omar Moreno, Vasiliy Morozov, Frederic Mouton, Holger Mueller, Alexander Murphy, Russell Neilson, Tim Nelson, Christopher Neu, Yuri Nosochkov, Ciaran O'Hare, Noah Oblath, John Orrell, Jonathan Ouellet, Saori Pastore, Sebouh Paul, Maxim Perelstein, Annika Peter, Nguyen Phan, Nan Phinney, Michael Pivovaroff, Andrea Pocar, Maxim Pospelov, Josef Pradler, Paolo Privitera, Stefano Profumo, Mauro Raggi, Surjeet Rajendran, Nunzio Randazzo, Tor Raubenheimer, Christian Regenfus, Andrew Renshaw, Adam Ritz, Thomas Rizzo, Leslie Rosenberg, Andre Rubbia, Ben Rybolt, Tarek Saab, Benjamin R. Safdi, Elena Santopinto, Andrew Scarff, Michael Schneider, Philip Schuster, George Seidel, Hiroyuki Sekiya, Ilsoo Seong, Gabriele Simi, Valeria Sipala, Tracy Slatyer, Oren Slone, Peter F Smith, Jordan Smolinsky, Daniel Snowden-Ifft, Matthew Solt, Andrew Sonnenschein, Peter Sorensen, Neil Spooner, Brijesh Srivastava, Ion Stancu, Louis Strigari, Jan Strube, Alexander O. Sushkov, Matthew Szydagis, Philip Tanedo, David Tanner, Rex Tayloe, William Terrano, Jesse Thaler, Brooks Thomas, Brianna Thorpe, Thomas Thorpe, Javier Tiffenberg, Nhan Tran, Marco Trovato, Christopher Tully, Tony Tyson, Tanmay Vachaspati, Sven Vahsen, Karl van Bibber, Justin Vandenbroucke, Anthony Villano, Tomer Volansky, Guojian Wang, Thomas Ward, William Wester, Andrew Whitbeck, David A. Williams, Matthew Wing, Lindley Winslow, Bogdan Wojtsekhowski, Hai-Bo Yu, Shin-Shan Yu, Tien-Tien Yu, Xilin Zhang, Yue Zhao, Yi-Ming Zhong
    July 14, 2017 hep-ph, hep-ex, astro-ph.CO
    This white paper summarizes the workshop "U.S. Cosmic Visions: New Ideas in Dark Matter" held at University of Maryland on March 23-25, 2017.
  • We reported a phenomenon that when exerting an electric field gradient across a liquid metal/electrolyte interface, a droplet of the same liquid metal can persistently surf on the interface without coalescence. A thin layer of the intermediate solution, which separates the droplet from direct metallic contacting and provides the levitating force, is responsible for such surfing effect. The electric resistance of this solution film is measured and the film thickness is further theoretically calculated. The fact that the levitating state can be switched on and off via a controlled manner paves a way for reliable manipulation of liquid metal droplet.
  • A pivotal task in quantum metrology, and quantum parameter estimation in general, is to de- sign schemes that achieve the highest precision with given resources. Standard models of quantum metrology usually assume the dynamics is fixed, the highest precision is achieved by preparing the optimal probe states and performing optimal measurements. However, in many practical experimental settings, additional controls are usually available to alter the dynamics. Here we propose to use optimal control methods for further improvement on the precision limit of quantum parameter estimation. We show that by exploring the additional degree of freedom offered by the controls higher precision limit can be achieved. In particular we show that the precision limit under the controlled schemes can go beyond the constraints put by the coherent time, which is in contrast to the standard scheme where the precision limit is always bounded by the coherent time.
  • We have carried out high-resolution angle-resolved photoemission measurements on the Cebased heavy fermion compound CePt2In7 that exhibits stronger two-dimensional character than the prototypical heavy fermion system CeCoIn5. Multiple Fermi surface sheets and a complex band structure are clearly resolved. We have also performed detailed band structure calculations on CePt2In7. The good agreement found between our measurements and the calculations suggests that the band renormalization effect is rather weak in CePt2In7. A comparison of the common features of the electronic structure of CePt2In7 and CeCoIn5 indicates that CeCoIn5 shows a much stronger band renormalization effect than CePt2In7. These results provide new information for understanding the heavy fermion behaviors and unconventional superconductivity in Ce-based heavy fermion systems.
  • Gallium-based liquid metals have recently been found important in a variety of newly emerging applications such as room temperature metal 3D printing, direct writing of electronics and biomedicine etc. In all these practices, one frequently encounters the situations that a printed circuit or track needs to be corrected or the unwanted parts of the device should be removed as desired. However, few appropriate strategies are currently available to tackle such important issues at this stage. Here we have identified several low cost ways toward this goal by comparatively investigating three typical strategies spanning from mechanical, chemical, to electrochemical principles, for removing the gallium-based liquid metal circuits or thin films. Regarding the mechanical approach, we constructed an eraser for removing the liquid metal thin films. It was shown that ethanol (CH3CH2OH) could serve as a good candidacy material for the mechanical eraser. In the chemical category, we adopted alkalis and acids to remove the finely printed liquid metal circuits and sodium hydroxide (NaOH) solution was particularly revealed to be rather efficient in making a chemical eraser. In the electrochemical strategy, we applied a 15 V voltage to a liquid metal thin film (covered with water) and successfully removed the target metal part. These methods were comparatively evaluated with each of the merits and shortcomings preliminarily clarified in the end. The present work is expected to be important for the increasing applications of the liquid metal enabled additive manufactures.