• ### Thermal mock-up studies of the DEPFET pixel vertex detector for Belle II(1607.00663)

March 18, 2017 hep-ex, physics.ins-det
The Belle II experiment currently under construction at the $e^+e^-$-collider SuperKEKB in Japan is designed to explore new physics beyond the standard model with an approximately 50 times larger data sample compared to its predecessor. The vertex detector (VXD), comprising a two layer DEPFET pixel detector (PXD) surrounded by four layers of double sided silicon strip detector (SVD), is indispensable for the accurate determination of the decay point of $B$ or $D$ meson as well as track reconstruction of low momentum particles. The DEPFET sensors in Belle II are thinned down to 75 $\mu$m with low power consumption and low intrinsic noise. In the DEPFET concept, the front-end electronics is placed outside of the sensitive area, and thus no cooling components are necessary inside the physics acceptance of the detector. Evaporative two-phase CO$_2$ cooling in combination with forced air flow has been chosen as the scheme for the PXD cooling. To guarantee the DEPFET detector operation condition and verify the cooling concept, a PXD mockup is constructed at DESY. Studies of the thermal and mechanical performance are presented in this paper.
• ### Resistive Plate Chamber Digitization in a Hadronic Shower Environment(1604.04550)

April 15, 2016 hep-ex, physics.ins-det
The CALICE Semi-Digital Hadron Calorimeter (SDHCAL) technological prototype is a sampling calorimeter using Glass Resistive Plate Chamber detectors with a three-threshold readout as the active medium. This technology is one of the two options proposed for the hadron calorimeter of the International Large Detector for the International Linear Collider. The prototype was exposed to beams of muons, electrons and pions of different energies at the CERN Super Proton Synchrotron. To be able to study the performance of such a calorimeter in future experiments it is important to ensure reliable simulation of its response. In this paper we present our prototype simulation performed with GEANT4 and the digitization procedure achieved with an algorithm called SimDigital. A detailed description of this algorithm is given and the methods to determinate its parameters using muon tracks and electromagnetic showers are explained. The comparison with hadronic shower data shows a good agreement up to 50 GeV. Discrepancies are observed at higher energies. The reasons for these differences are investigated.
• ### Validation of GEANT4 Monte Carlo Models with a Highly Granular Scintillator-Steel Hadron Calorimeter(1306.3037)

June 15, 2014 hep-ex, physics.ins-det
Calorimeters with a high granularity are a fundamental requirement of the Particle Flow paradigm. This paper focuses on the prototype of a hadron calorimeter with analog readout, consisting of thirty-eight scintillator layers alternating with steel absorber planes. The scintillator plates are finely segmented into tiles individually read out via Silicon Photomultipliers. The presented results are based on data collected with pion beams in the energy range from 8GeV to 100GeV. The fine segmentation of the sensitive layers and the high sampling frequency allow for an excellent reconstruction of the spatial development of hadronic showers. A comparison between data and Monte Carlo simulations is presented, concerning both the longitudinal and lateral development of hadronic showers and the global response of the calorimeter. The performance of several GEANT4 physics lists with respect to these observables is evaluated.
• ### Study of the interactions of pions in the CALICE silicon-tungsten calorimeter prototype(1004.4996)

April 28, 2010 hep-ex, physics.ins-det
A prototype silicon-tungsten electromagnetic calorimeter for an ILC detector was tested in 2007 at the CERN SPS test beam. Data were collected with electron and hadron beams in the energy range 8 to 80 GeV. The analysis described here focuses on the interactions of pions in the calorimeter. One of the main objectives of the CALICE program is to validate the Monte Carlo tools available for the design of a full-sized detector. The interactions of pions in the Si-W calorimeter are therefore confronted with the predictions of various physical models implemented in the GEANT4 simulation framework.