• ### Long-Baseline Neutrino Facility (LBNF) and Deep Underground Neutrino Experiment (DUNE) Conceptual Design Report Volume 2: The Physics Program for DUNE at LBNF(1512.06148)

Jan. 22, 2016 hep-ex, physics.ins-det
The Physics Program for the Deep Underground Neutrino Experiment (DUNE) at the Fermilab Long-Baseline Neutrino Facility (LBNF) is described.
• ### Long-Baseline Neutrino Facility (LBNF) and Deep Underground Neutrino Experiment (DUNE) Conceptual Design Report, Volume 4 The DUNE Detectors at LBNF(1601.02984)

Jan. 12, 2016 hep-ex, physics.ins-det
A description of the proposed detector(s) for DUNE at LBNF
• The observation of the recent electron neutrino appearance in a muon neutrino beam and the high-precision measurement of the mixing angle $\theta_{13}$ have led to a re-evaluation of the physics potential of the T2K long-baseline neutrino oscillation experiment. Sensitivities are explored for CP violation in neutrinos, non-maximal $\sin^22\theta_{23}$, the octant of $\theta_{23}$, and the mass hierarchy, in addition to the measurements of $\delta_{CP}$, $\sin^2\theta_{23}$, and $\Delta m^2_{32}$, for various combinations of $\nu$-mode and $\bar{\nu}$-mode data-taking. With an exposure of $7.8\times10^{21}$~protons-on-target, T2K can achieve 1-$\sigma$ resolution of 0.050(0.054) on $\sin^2\theta_{23}$ and $0.040(0.045)\times10^{-3}~\rm{eV}^2$ on $\Delta m^2_{32}$ for 100\%(50\%) neutrino beam mode running assuming $\sin^2\theta_{23}=0.5$ and $\Delta m^2_{32} = 2.4\times10^{-3}$ eV$^2$. T2K will have sensitivity to the CP-violating phase $\delta_{\rm{CP}}$ at 90\% C.L. or better over a significant range. For example, if $\sin^22\theta_{23}$ is maximal (i.e $\theta_{23}$=$45^\circ$) the range is $-115^\circ<\delta_{\rm{CP}}<-60^\circ$ for normal hierarchy and $+50^\circ<\delta_{\rm{CP}}<+130^\circ$ for inverted hierarchy. When T2K data is combined with data from the NO$\nu$A experiment, the region of oscillation parameter space where there is sensitivity to observe a non-zero $\delta_{CP}$ is substantially increased compared to if each experiment is analyzed alone.
• The T2K collaboration reports a precision measurement of muon neutrino disappearance with an off-axis neutrino beam with a peak energy of 0.6 GeV. Near detector measurements are used to constrain the neutrino flux and cross section parameters. The Super-Kamiokande far detector, which is 295 km downstream of the neutrino production target, collected data corresponding to $3.01 \times 10^{20}$ protons on target. In the absence of neutrino oscillations, $205 \pm 17$ (syst.) events are expected to be detected and only 58 muon neutrino event candidates are observed. A fit to the neutrino rate and energy spectrum assuming three neutrino flavors, normal mass hierarchy and $\theta_{23}\leq \pi/4$ yields a best-fit mixing angle $\sin^2(2\theta_{23})=1.000$ and mass splitting $|\Delta m^2_{32}| =2.44 \times 10^{-3}$ eV$^2$/c$^4$. If $\theta_{23}\geq \pi/4$ is assumed, the best-fit mixing angle changes to $\sin^2(2\theta_{23})=0.999$ and the mass splitting remains unchanged.
• ### First results on light readout from the 1-ton ArDM liquid argon detector for dark matter searches(1009.3641)

Oct. 27, 2010 physics.ins-det
ArDM-1t is the prototype for a next generation WIMP detector measuring both the scintillation light and the ionization charge from nuclear recoils in a 1-ton liquid argon target. The goal is to reach a minimum recoil energy of 30\,keVr to detect recoiling nuclei. In this paper we describe the experimental concept and present results on the light detection system, tested for the first time in ArDM on the surface at CERN. With a preliminary and incomplete set of PMTs, the light yield at zero electric field is found to be between 0.3-0.5 phe/keVee depending on the position within the detector volume, confirming our expectations based on smaller detector setups.
• ### The ArDM experiment(1006.5335)

The aim of the ArDM project is the development and operation of a one ton double-phase liquid argon detector for direct Dark Matter searches. The detector measures both the scintillation light and the ionization charge from ionizing radiation using two independent readout systems. This paper briefly describes the detector concept and presents preliminary results from the ArDM R&D program, including a 3 l prototype developed to test the charge readout system.
• ### Development of wavelength shifter coated reflectors for the ArDM argon dark matter detector(0904.0246)

April 1, 2009 physics.ins-det
To optimise the design of the light readout in the ArDM 1-ton liquid argon dark matter detector, a range of reflector and WLS coating combinations were investigated in several small setups, where argon scintillation light was generated by radioactive sources in gas at normal temperature and pressure and shifted into the blue region by tetraphenyl butadiene (TPB). Various thicknesses of TPB were deposited by spraying and vacuum evaporation onto specular 3M{\small\texttrademark}-foil and diffuse Tetratex{\small\textregistered} (TTX) substrates. Light yields of each reflector and TPB coating combination were compared. Reflection coefficients of TPB coated reflectors were independently measured using a spectroradiometer in a wavelength range between 200 and 650 nm. WLS coating on the PMT window was also studied. These measurements were used to define the parameters of the light reflectors of the ArDM experiment. Fifteen large $120\times 25$ cm$^2$ TTX sheets were coated and assembled in the detector. Measurements in argon gas are reported providing good evidence of fulfilling the light collection requirements of the experiment.