-
The SST-1M is a 4-m Davies--Cotton atmospheric Cherenkov telescope optimized
to provide gamma-ray sensitivity above a few TeV. The SST-1M is proposed as
part of the Small-Size Telescope array for the Cherenkov Telescope Array (CTA),
the first prototype has already been deployed. The SST-1M control software of
all subsystems (active mirror control, drive system, safety system,
photo-detection plane, DigiCam, CCD cameras) and the whole telescope itself
(master controller) uses the standard software design proposed for all CTA
telescopes based on the ALMA Common Software (ACS) developed to control the
Atacama Large Millimeter Array (ALMA). Each subsystem is represented by a
separate ACS component, which handles the communication to and the operation of
the subsystem. Interfacing with the actual hardware is performed via the OPC UA
communication protocol, supported either natively by dedicated industrial
standard servers (PLCs) or separate service applications developed to wrap
lower level protocols (e.g. CAN bus, camera slow control) into OPC UA. Early
operations of the telescope without the camera were already carried out. The
camera is fully assembled and is capable to perform data acquisition using
artificial light source.
-
List of contributions from the Cherenkov Telescope Array (CTA) Consortium
presented at the 6th International Symposium on High-Energy Gamma-Ray Astronomy
(Gamma 2016), July 11-15, 2016, in Heidelberg, Germany.
-
The Small Size Telescope with Single Mirror (SST-1M) is one of the proposed
types of Small Size Telescopes (SST) for the Cherenkov Telescope Array (CTA).
About 70 SST telescopes will be part the CTA southern array which will also
include Medium Sized Telescopes (MST) in its threshold configuration. Optimized
for the detection of gamma rays in the energy range from 5 TeV to 300 TeV, the
SST-1M uses a Davies-Cotton optics with a 4 m dish diameter with a field of
view of 9 degrees. The Cherenkov light resulting from the interaction of the
gamma-rays in the atmosphere is focused onto a 88 cm side-to-side hexagonal
photo-detection plane. The latter is composed of 1296 hollow light guides
coupled to large area hexagonal silicon photomultipliers (SiPM). The SiPM
readout is fully digital readout as for the trigger system. The compact and
lightweight design of the SST-1M camera offers very high performance ideal for
gamma-ray observation requirement. In this contribution, the concept, design,
performance and status of the first telescope prototype are presented.
-
List of contributions from the CTA Consortium presented at the 34th
International Cosmic Ray Conference, 30 July - 6 August 2015, The Hague, The
Netherlands.
-
A single-mirror small-size (SST-1M) Davies-Cotton telescope with a dish
diameter of 4 m has been built by a consortium of Polish and Swiss institutions
as a prototype for one of the proposed small-size telescopes for the southern
observatory of the Cherenkov Telescope Array (CTA). The design represents a
very simple, reliable, and cheap solution. The mechanical structure prototype
with its drive system is now being tested at the Institute of Nuclear Physics
PAS in Krakow. Here we present the design of the prototype and results of the
performance tests of the structure and the drive and control system.
-
Imaging Atmospheric Cherenkov Telescopes (IACTs) are ground-based instruments
devoted to the study of very high energy gamma-rays coming from space. The
detection technique consists of observing images created by the Cherenkov light
emitted when gamma rays, or more generally cosmic rays, propagate through the
atmosphere. While in the case of protons or gamma-rays the images present a
filled and more or less elongated shape, energetic muons penetrating the
atmosphere are visualised as characteristic circular rings or arcs. A
relatively simple analysis of the ring images allows the reconstruction of all
the relevant parameters of the detected muons, such as the energy, the impact
parameter, and the incoming direction, with the final aim to use them to
calibrate the total optical throughput of the given IACT telescope. We present
the results of preliminary studies on the use of images created by muons as
optical throughput calibrators of the single mirror small size telescope
prototype SST-1M proposed for the Cherenkov Telescope Array.
-
The Small-Size Telescope with single-mirror (SST-1M) is a 4 m Davies-Cotton
telescope and is among the proposed telescope designs for the Cherenkov
Telescope Array (CTA). It is conceived to provide the high-energy ($>$ few TeV)
coverage. The SST-1M contains proven technology for the telescope structure and
innovative electronics and photosensors for the camera. Its design is meant to
be simple, low-budget and easy-to-build industrially.
Each device subsystem of an SST-1M telescope is made visible to CTA through a
dedicated industrial standard server. The software is being developed in
collaboration with the CTA Medium-Size Telescopes to ensure compatibility and
uniformity of the array control. Early operations of the SST-1M prototype will
be performed with a subset of the CTA central array control system based on the
Alma Common Software (ACS). The triggered event data are time stamped,
formatted and finally transmitted to the CTA data acquisition.
The software system developed to control the devices of an SST-1M telescope
is described, as well as the interface between the telescope abstraction to the
CTA central control and the data acquisition system.
-
The prototype of a Davies-Cotton small size telescope (SST-1M) has been
designed and developed by a consortium of Polish and Swiss institutions and
proposed for the Cherenkov Telescope Array (CTA) observatory. The main purpose
of the optical system is to focus the Cherenkov light emitted by extensive air
showers in the atmosphere onto the focal plane detectors. The main component of
the system is a dish consisting of 18 hexagonal mirrors with a total effective
collection area of 6.47 m2 (including the shadowing and estimated mirror
reflectivity). Such a solution was chosen taking into account the analysis of
the Cherenkov light propagation and based on optical simulations. The proper
curvature and stability of the dish is ensured by the mirror alignment system
and the isostatic interface to the telescope structure. Here we present the
design of the optical subsystem together with the performance measurements of
its components.
-
The SST-1M telescope is one of the prototypes under construction proposed to
be part of the future Cherenkov Telescope Array. It uses a standard
Davis-Cotton design for the optics and telescope structure, with a dish
diameter of 4 meters and a large field-of-view of 9 degrees.
The innovative camera design is composed of a photo-detection plane with 1296
pixels including entrance window, light concentrators, Silicon Photomultipliers
(SiPMs), and pre-amplifier stages together with a fully digital readout and
trigger electronics, DigiCam.
In this contribution we give a general description of the analysis chain
designed for the SST-1M prototype. In particular we focus on the calibration
strategy used to convert the SiPM signals registered by DigiCam to the
quantities needed for Cherenkov image analysis. The calibration is based on an
online feedback system to stabilize the gain of the SiPMs, as well as dedicated
events (dark count, pedestal, and light flasher events) to be taken during the
normal operation of the prototype.
-
The single mirror small-size telescope (SST-1M) is one of the telescope
projects being proposed for the Cherenkov Telescope Array observatory by a
sub-consortium of Polish and Swiss institutions. The SST-1M prototype structure
is currently being constructed at the Institute of Nuclear Physics in Cracow,
Poland, while the camera will be assembled at the University of Geneva,
Switzerland. This prototype enables measurements of parameters having a
decisive influence on the telescope performance. We present results of
numerical simulations of the SST-1M performance based on such measurements. The
telescope effective area, the expected trigger rates and the optical point
spread function are calculated.
-
The SST-1M is one of three prototype small-sized telescope designs proposed
for the Cherenkov Telescope Array, and is built by a consortium of Polish and
Swiss institutions. The SST-1M will operate with DigiCam - an innovative,
compact camera with fully digital read-out and trigger electronics. A high
level of integration will be achieved by massively deploying state-of-the-art
multi-gigabit transmission channels, beginning from the ADC flash converters,
through the internal data and trigger signals transmission over backplanes and
cables, to the camera's server link. Such an approach makes it possible to
design the camera to fit the size and weight requirements of the SST-1M
exactly, and provide low power consumption, high reliability and long lifetime.
The structure of the digital electronics will be presented, along with main
physical building blocks and the internal architecture of FPGA functional
subsystems.
-
Compilation of CTA contributions to the proceedings of the 33rd International
Cosmic Ray Conference (ICRC2013), which took place in 2-9 July, 2013, in Rio de
Janeiro, Brazil
-
The Cherenkov Telescope Array (CTA) is the next generation very high energy
gamma-ray observatory. It will consist of three classes of telescopes, of
large, medium and small sizes. The small telescopes, of 4 m diameter, will be
dedicated to the observations of the highest energy gamma-rays, above several
TeV. We present the technical characteristics of a single mirror, 4 m diameter,
Davies-Cotton telescope for the CTA and the performance of the sub-array
consisting of the telescopes of this type. The telescope will be equipped with
a fully digital camera based on custom made, hexagonal Geiger-mode avalanche
photodiodes. The development of cameras based on such devices is an RnD since
traditionally photomultipliers are used. The photodiodes are now being
characterized at various institutions of the CTA Consortium. Glass mirrors will
be used, although an alternative is being considered: composite mirrors that
could be adopted if they meet the project requirements. We present a design of
the telescope structure, its components and results of the numerical
simulations of the telescope performance.
-
The physical phase of Causal Dynamical Triangulations (CDT) is known to be
described by an effective, one-dimensional action in which three-volumes of the
underlying foliation of the full CDT play a role of the sole degrees of
freedom. Here we map this effective description onto a statistical-physics
model of particles distributed on 1d lattice, with site occupation numbers
corresponding to the three-volumes. We identify the emergence of the quantum
de-Sitter universe observed in CDT with the condensation transition known from
similar statistical models. Our model correctly reproduces the shape of the
quantum universe and allows us to analytically determine quantum corrections to
the size of the universe. We also investigate the phase structure of the model
and show that it reproduces all three phases observed in computer simulations
of CDT. In addition, we predict that two other phases may exists, depending on
the exact form of the discretised effective action and boundary conditions. We
calculate various quantities such as the distribution of three-volumes in our
model and discuss how they can be compared with CDT.
-
A free zero-range process (FRZP) is a simple stochastic process describing
the dynamics of a gas of particles hopping between neighboring nodes of a
network. We discuss three different cases of increasing complexity: (a) FZRP on
a rigid geometry where the network is fixed during the process, (b) FZRP on a
random graph chosen from a given ensemble of networks, (c) FZRP on a dynamical
network whose topology continuously changes during the process in a way which
depends on the current distribution of particles. The case (a) provides a very
simple realization of the phenomenon of condensation which manifests as the
appearance of a condensate of particles on the node with maximal degree. The
case (b) is very interesting since the averaging over typical ensembles of
graphs acts as a kind of homogenization of the system which makes all nodes
identical from the point of view of the FZRP. In the case (c), the distribution
of particles and the dynamics of network are coupled to each other. The
strength of this coupling depends on the ratio of two time scales: for changes
of the topology and of the FZRP. We will discuss a specific example of that
type of interaction and show that it leads to an interesting phase diagram.
-
We investigate the role of inhomogeneities in zero-range processes in
condensation dynamics.We consider the dynamics of balls hopping between nodes
of a network, and find that the condensation is triggered by the ratio k_1/k of
the highest degree k_1 to the average degree k. Although the condensate takes
on the average an extensive number of balls, its occupation can oscillate in a
wide range. We show that in systems with strong inhomogeneity, the typical
melting time of the condensate grows exponentially with the number of balls.
-
We discuss two different regimes of condensate formation in zero-range
processes on networks: on a q-regular network, where the condensate is formed
as a result of a spontaneous symmetry breaking, and on an irregular network,
where the symmetry of the partition function is explicitly broken. In the
latter case we consider a minimal irregularity of the q-regular network
introduced by a single Q-node with degree Q>q. The statics and dynamics of the
condensation depends on the parameter log(Q/q), which controls the exponential
fall-off of the distribution of particles on regular nodes and the typical time
scale for melting of the condensate on the Q-node which increases exponentially
with the system size $N$. This behavior is different than that on a q-regular
network where log(Q/q)=0 and where the condensation results from the
spontaneous symmetry breaking of the partition function, which is invariant
under a permutation of particle occupation numbers on the q-nodes of the
network. In this case the typical time scale for condensate melting is known to
increase typically as a power of the system size.
-
We present a program package which generates homogeneous random graphs with
probabilities prescribed by the user. The statistical weight of a labeled graph
$\alpha$ is given in the form $W(\alpha)=\prod_{i=1}^N p(q_i)$, where $p(q)$ is
an arbitrary user function and $q_i$ are the degrees of the graph nodes. The
program can be used to generate two types of graphs (simple graphs and
pseudo-graphs) from three types of ensembles (micro-canonical, canonical and
grand-canonical).
-
We implement Wilson fermions on 2D Lorentzian triangulation and determine the
spectrum of the Dirac-Wilson operator. We compare it to the spectrum of the
corresponding operator in the Euclidean background. We use fermionic particle
to probe the fractal properties of Lorentzian gravity coupled to $c=1/2$ and
$c=4$ matter. We numerically determine the scaling exponent of the mass gap $M
\sim N^{-1/d_H}$ to be $d_H=2.11(5)$, and $d_H=1.77(3)$ for $c=1/2$ and $c=4$,
respectively
-
We discuss the finite size behaviour in the canonical ensemble of the balls
in boxes model. We compare theoretical predictions and numerical results for
the finite size scaling of cumulants of the energy distribution in the
canonical ensemble and perform a detailed analysis of the first and third order
phase transitions which appear for different parameter values in the model.