• ### Thermoelectric transport in co-planar polycrystalline graphene-hBN heterostructure(1804.09272)

April 24, 2018 cond-mat.mes-hall
We present a theoretical study of electronic and thermal transport properties in hybrid polycrystalline heterostructures combining graphene (G) and boron-nitride (hBN) grains of varying size, and intermixed through random distributions. By increasing the hBN grain density from few percents to $100\%$, the system evolves from good conductor to insulator, with mobility dropping by orders of magnitudes, while the sheet resistance reaches the M$\Omega$ regime. Seebeck coefficients are fully suppressed at around $50\%$ of mixing, whereas the thermal conductivity is found to be in the order of $30-120\,{\rm W}{\rm m}^{-1}{\rm K}^{-1}$ for polycrystalline hBN. These results, agreeing with available experimental data, provide further guidelines for optimizing G-hBN properties in the context of two-dimensional materials engineering.
• ### Record Low Thermal Conductivity of Polycrystalline MoS2 films: Tuning the Thermal Conductivity by Grain Orientation(1706.06484)

June 20, 2017 cond-mat.mes-hall
We report a record low thermal conductivity in polycrystalline MoS2 obtained by varying grain sizes and orientations in ultrathin films. By optimizing the sulphurisation parameters of nanometre-thick Mo layer, we could grow MoS2 films with tuneable morphologies. The thermal conductivity is extracted from a Raman laser power-dependent study on suspended samples. The lowest value of thermal conductivity of 0.27 Wm-1K-1, which reaches a similar value as teflon, is obtained in a polycrystalline sample formed by a combination of horizontally and vertically oriented grains, with respect to the bulk (001) monocrystal. Analysis by means of molecular dynamics and finite element method simulations confirm that such grain arrangement leads to lower grain boundary conductance. We discuss the possible use of these thermal insulating films in the context of electronics and thermoelectricity.
• ### Characterization of hexagonal boron nitride layers on nickel surfaces by low-energy electron microscopy(1611.04844)

Feb. 4, 2017 cond-mat.mes-hall
The thickness and interfacial geometry of hexagonal boron nitride (hBN) films grown by chemical vapor deposition on polycrystalline nickel foils is studied using low-energy electron microscopy (LEEM). The reflectivity of the electrons, measured over an energy range of 0 - 20 eV, reveals distinct minima and maxima. The measured data is compared with simulations based on a first-principles description of the electronic structure of the material. From this comparison, the number of hBN layers and the separation between the lowest hBN layer and the nickel surface is deduced. The coupling of interlayer states of the hBN to both image-potential and Shockley-type surface states of the nickel is discussed, and the dependence of the reflectivity spectra on the surface orientation of nickel grains is examined.
• ### Production, Processing and Placement of Graphene and Two Dimensional Crystals(1212.3319)

Graphene is at the centre of an ever growing research effort due to its unique properties, interesting for both fundamental science and applications. A key requirement for applications is the development of industrial-scale, reliable, inexpensive production processes. Here we review the state of the art of graphene preparation, production, placement and handling. Graphene is just the first of a new class of two dimensional materials, derived from layered bulk crystals. Most of the approaches used for graphene can be extended to these crystals, accelerating their journey towards applications.
• ### Planck early results. III. First assessment of the Low Frequency Instrument in-flight performance(1101.2038)

Dec. 19, 2011 astro-ph.CO, astro-ph.IM
The scientific performance of the Planck Low Frequency Instrument (LFI) after one year of in-orbit operation is presented. We describe the main optical parameters and discuss photometric calibration, white noise sensitivity, and noise properties. A preliminary evaluation of the impact of the main systematic effects is presented. For each of the performance parameters, we outline the methods used to obtain them from the flight data and provide a comparison with pre-launch ground assessments, which are essentially confirmed in flight.
• ### Planck Early Results. V. The Low Frequency Instrument data processing(1101.2040)

Dec. 7, 2011 astro-ph.CO, astro-ph.IM
We describe the processing of data from the Low Frequency Instrument (LFI) used in production of the Planck Early Release Compact Source Catalogue (ERCSC). In particular, we discuss the steps involved in reducing the data from telemetry packets to cleaned, calibrated, time-ordered data (TOD) and frequency maps. Data are continuously calibrated using the modulation of the temperature of the cosmic microwave background radiation induced by the motion of the spacecraft. Noise properties are estimated from TOD from which the sky signal has been removed using a generalized least square map-making algorithm. Measured 1/f noise knee-frequencies range from 100mHz at 30GHz to a few tens of mHz at 70GHz. A destriping code (Madam) is employed to combine radiometric data and pointing information into sky maps, minimizing the variance of correlated noise. Noise covariance matrices required to compute statistical uncertainties on LFI and Planck products are also produced. Main beams are estimated down to the approx -10dB level using Jupiter transits, which are also used for geometrical calibration of the focal plane.
• ### Optimal Control of Underactuated Mechanical Systems: A Geometric Approach(0912.2033)

Dec. 10, 2009 math-ph, math.MP
In this paper, we consider a geometric formalism for optimal control of underactuated mechanical systems. Our techniques are an adaptation of the classical Skinner and Rusk approach for the case of Lagrangian dynamics with higher-order constraints. We study a regular case where it is possible to establish a symplectic framework and, as a consequence, to obtain a unique vector field determining the dynamics of the optimal control problem. These developments will allow us to develop a new class of geometric integrators based on discrete variational calculus.
• ### Leaving the Fullerene Road: Presence and Stability of sp Chains in sp2 Carbon Clusters and Cluster-Assembled Solids(cond-mat/0501342)

Jan. 14, 2005 cond-mat.mtrl-sci
We report the experimental and theoretical investigation of the growth and of the structure of large carbon clusters produced in a supersonic expansion by a pulsed microplasma source. The absence of a significant thermal annealing during the cluster growth causes the formation of disordered structures where sp2 and sp hybridizations coexist for particles larger than roughly 90 atoms. Among different structures we recognize sp2 closed networks encaging sp chains. This "nutshell" configuration can prevent the fragmentation of sp species upon deposition of the clusters thus allowing the formation of nanostructured films containing carbynoid species, as shown by Raman spectroscopy. Atomistic simulations confirm that the observed Raman spectra are the signature of the sp/sp2 hybridization characteristic of the isolated clusters and surviving in the film and provide information about the structure of the sp chains. Endohedral sp chains in sp2 cages represent a novel way in which carbon nanostructures may be organized with potential interesting functional properties.
• ### The Sky Polarization Observatory(astro-ph/0401193)

Jan. 14, 2004 astro-ph
SPOrt is an ASI-funded experiment specifically designed to measure the sky polarization at 22, 32 and 90 GHz, which was selected in 1997 by ESA to be flown on the International Space Station. Starting in 2006 and for at least 18 months, it will be taking direct and simultaneous measurements of the Stokes parameters Q and U at 660 sky pixels, with FWHM=7 degrees. Due to development efforts over the past few years, the design specifications have been significantly improved with respect to the first proposal. Here we present an up-to-date description of the instrument, which now warrants a pixel sensitivity of 1.7 microK for the polarization of the cosmic background radiation, assuming two years of observations. We discuss SPOrt scientific goals in the light of WMAP results, in particular in connection with the emerging double-reionization cosmological scenario.
• ### Nanofriction behavior of cluster-assembled carbon films(cond-mat/0208167)

Aug. 8, 2002 cond-mat.mtrl-sci
We have characterized the frictional properties of nanostructured (ns) carbon films grown by Supersonic Cluster Beam Deposition (SCBD) via an Atomic Force-Friction Force Microscope (AFM-FFM). The experimental data are discussed on the basis of a modified Amonton's law for friction, stating a linear dependence of friction on load plus an adhesive offset accounting for a finite friction force in the limit of null total applied load. Molecular Dynamics simulations of the interaction of the AFM tip with the nanostructured carbon confirm the validity of the friction model used for this system. Experimental results show that the friction coefficient is not influenced by the nanostructure of the films nor by the relative humidity. On the other hand the adhesion coefficient depends on these parameters.