-
Context: Exoplanet science has made staggering progress in the last two
decades, due to the relentless exploration of new detection methods and
refinement of existing ones. Yet astrometry offers a unique and untapped
potential of discovery of habitable-zone low-mass planets around all the
solar-like stars of the solar neighborhood. To fulfill this goal, astrometry
must be paired with high precision calibration of the detector.
Aims: We present a way to calibrate a detector for high accuracy astrometry.
An experimental testbed combining an astrometric simulator and an
interferometric calibration system is used to validate both the hardware needed
for the calibration and the signal processing methods. The objective is an
accuracy of 5e-6 pixel on the location of a Nyquist sampled polychromatic point
spread function.
Methods: The interferometric calibration system produced modulated Young
fringes on the detector. The Young fringes were parametrized as products of
time and space dependent functions, based on various pixel parameters. The
minimization of func- tion parameters was done iteratively, until convergence
was obtained, revealing the pixel information needed for the calibration of
astrometric measurements.
Results: The calibration system yielded the pixel positions to an accuracy
estimated at 4e-4 pixel. After including the pixel position information, an
astrometric accuracy of 6e-5 pixel was obtained, for a PSF motion over more
than five pixels. In the static mode (small jitter motion of less than 1e-3
pixel), a photon noise limited precision of 3e-5 pixel was reached.
-
Theia is an astrometric mission proposed to ESA in 2014 for which one of the
scientific objectives is detecting Earth-like exoplanets in the habitable zone
of nearby solar-type stars. This objective requires the capability to measure
stellar centroids at the precision of 1e-5 pixel. Current state-of-the-art
methods for centroid estimation have reached a precision of about 3e-5 pixel at
two times Nyquist sampling, this was shown at the JPL by the VESTA experiment.
A metrology system was used to calibrate intra and inter pixel quantum
efficiency variations in order to correct pixelation errors. The Theia
consortium is operating a testbed in vacuum in order to achieve 1e-5 pixel
precision for the centroid estimation. The goal is to provide a proof of
concept for the precision requirement of the Theia spacecraft.
The testbed consists of two main sub-systems. The first one produces pseudo
stars: a blackbody source is fed into a large core fiber and lights-up a
pinhole mask in the object plane, which is imaged by a mirror on the CCD. The
second sub-system is the metrology, it projects young fringes on the CCD. The
fringes are created by two single mode fibers facing the CCD and fixed on the
mirror. In this paper we present the latest experiments conducted and the
results obtained after a series of upgrades on the testbed was completed. The
calibration system yielded the pixel positions to an accuracy estimated at 4e-4
pixel. After including the pixel position information, an astrometric accuracy
of 6e-5 pixel was obtained, for a PSF motion over more than 5 pixels. In the
static mode (small jitter motion of less than 1e-3 pixel), a photon noise
limited precision of 3e-5 pixel was reached.
-
NEAT is an astrometric mission proposed to ESA with the objectives of
detecting Earth-like exoplanets in the habitable zone of nearby solar-type
stars. NEAT requires the capability to measure stellar centroids at the
precision of 5e-6 pixel. Current state-of-the-art methods for centroid
estimation have reached a precision of about 2e-5 pixel at two times Nyquist
sampling, this was shown at the JPL by the VESTA experiment. A metrology system
was used to calibrate intra and inter pixel quantum efficiency variations in
order to correct pixelation errors. The European part of the NEAT consortium is
building a testbed in vacuum in order to achieve 5e-6 pixel precision for the
centroid estimation. The goal is to provide a proof of concept for the
precision requirement of the NEAT spacecraft.
The testbed consists of two main sub-systems. The first one produces pseudo
stars: a blackbody source is fed into a large core fiber and lights-up a
pinhole mask in the object plane, which is imaged by a mirror on the CCD. The
second sub-system is the metrology, it projects young fringes on the CCD. The
fringes are created by two single mode fibers facing the CCD and fixed on the
mirror. In this paper we present the experiments conducted and the results
obtained since July 2013 when we had the first light on both the metrology and
pseudo stars. We explain the data reduction procedures we used.
-
NEAT is an astrometric mission proposed to ESA with the objectives of
detecting Earth-like exoplanets in the habitable zone of nearby solar-type
stars. NEAT requires the capability to measure stellar centroids at the
precision of 5e-6 pixel. Current state-of-the-art methods for centroid
estimation have reached a precision of about 2e-5 pixel at two times Nyquist
sampling, this was shown at the JPL by the VESTA experiment. A metrology system
was used to calibrate intra and inter pixel quantum efficiency variations in
order to correct pixelation errors. The European part of the NEAT consortium is
building a testbed in vacuum in order to achieve 5e-6 pixel precision for the
centroid estimation. The goal is to provide a proof of concept for the
precision requirement of the NEAT spacecraft. In this paper we present the
metrology and the pseudo stellar sources sub-systems, we present a performance
model and an error budget of the experiment and we report the present status of
the demonstration. Finally we also present our first results: the experiment
had its first light in July 2013 and a first set of data was taken in air. The
analysis of this first set of data showed that we can already measure the pixel
positions with an accuracy of about 1e-4 pixel.
-
The Spectral and Photometric Imaging Receiver (SPIRE), is the Herschel Space
Observatory`s submillimetre camera and spectrometer. It contains a three-band
imaging photometer operating at 250, 350 and 500 microns, and an imaging
Fourier Transform Spectrometer (FTS) which covers simultaneously its whole
operating range of 194-671 microns (447-1550 GHz). The SPIRE detectors are
arrays of feedhorn-coupled bolometers cooled to 0.3 K. The photometer has a
field of view of 4' x 8', observed simultaneously in the three spectral bands.
Its main operating mode is scan-mapping, whereby the field of view is scanned
across the sky to achieve full spatial sampling and to cover large areas if
desired. The spectrometer has an approximately circular field of view with a
diameter of 2.6'. The spectral resolution can be adjusted between 1.2 and 25
GHz by changing the stroke length of the FTS scan mirror. Its main operating
mode involves a fixed telescope pointing with multiple scans of the FTS mirror
to acquire spectral data. For extended source measurements, multiple position
offsets are implemented by means of an internal beam steering mirror to achieve
the desired spatial sampling and by rastering of the telescope pointing to map
areas larger than the field of view. The SPIRE instrument consists of a cold
focal plane unit located inside the Herschel cryostat and warm electronics
units, located on the spacecraft Service Module, for instrument control and
data handling. Science data are transmitted to Earth with no on-board data
compression, and processed by automatic pipelines to produce calibrated science
products. The in-flight performance of the instrument matches or exceeds
predictions based on pre-launch testing and modelling: the photometer
sensitivity is comparable to or slightly better than estimated pre-launch, and
the spectrometer sensitivity is also better by a factor of 1.5-2.