• ### Acoustic charge transport in n-i-n three terminal device(cond-mat/0510655)

Oct. 25, 2005 cond-mat.mes-hall
We present an unconventional approach to realize acoustic charge transport devices that takes advantage from an original input region geometry in place of standard Ohmic input contacts. Our scheme is based on a n-i-n lateral junction as electron injector, an etched intrinsic channel, a standard Ohmic output contact and a pair of in-plane gates. We show that surface acoustic waves are able to pick up electrons from a current flowing through the n-i-n junction and steer them toward the output contact. Acoustic charge transport was studied as a function of the injector current and bias, the SAW power and at various temperatures. The possibility to modulate the acoustoelectric current by means of lateral in-plane gates is also discussed. The main advantage of our approach relies on the possibility to drive the n-i-n injector by means of both voltage or current sources, thus allowing to sample and process voltage and current signals as well.
• ### Surface acoustic wave-induced electroluminescence intensity oscillation in planar light-emitting devices(cond-mat/0501136)

Jan. 7, 2005 cond-mat.other
Electroluminescence emission from surface acoustic wave-driven light-emitting diodes (SAWLEDs) is studied by means of time-resolved techniques. We show that the intensity of the SAW-induced electroluminescence is modulated at the SAW frequency (~1 GHz), demonstrating electron injection into the p-type region synchronous with the SAW wavefronts.
• ### Surface-acoustic-wave driven planar light-emitting device(cond-mat/0403357)

March 15, 2004 cond-mat.other
Electroluminescence emission controlled by means of surface acoustic waves (SAWs) in planar light-emitting diodes (pLEDs) is demonstrated. Interdigital transducers for SAW generation were integrated onto pLEDs fabricated following the scheme which we have recently developed. Current-voltage, light-voltage and photoluminescence characteristics are presented at cryogenic temperatures. We argue that this scheme represents a valuable building block for advanced optoelectronic architectures.
• ### High-performance planar light-emitting diode(cond-mat/0207735)

July 31, 2002 cond-mat.mtrl-sci
Planar light-emitting diodes (LEDs) fabricated within a single high-mobility quantum well are demonstrated. Our approach leads to a dramatic reduction of radiative lifetime and junction area with respect to conventional vertical LEDs, promising very high-frequency device operation. Devices were fabricated by UV lithography and wet chemical etching starting from p-type modulation-doped AlGaAs/GaAs heterostructures grown by molecular beam epitaxy. Electrical and optical measurements from room temperature down to 1.8 K show high spectral purity and high external efficiency. Time-resolved measurements yielded extremely short recombination times of the order of 50 ps, demonstrating the relevance of the present scheme for high-frequency device applications in the GHz range.
• ### Reflectionless tunneling in planar Nb/GaAs hybrid junctions(cond-mat/0102053)

Reflectionless-tunneling was observed in Nb/GaAs superconductor/semiconductor junctions fabricated through a two-step procedure. First, periodic $\delta$-doped layers were grown by molecular beam epitaxy near the GaAs surface, followed by an As cap layer to protect the surface during {\it ex-situ} transfer. Second, Nb was deposited by dc-magnetron sputtering onto the GaAs(001) 2 $\times$ 4 surface {\it in-situ} after thermal desorption of the cap layer. The magnetotransport behavior of the resulting hybrid junctions was successfully analyzed within the random matrix theory of phase-coherent Andreev transport. The impact of junction morphology on reflectionless tunneling and the applicability of the fabrication technique to the realization of complex superconductor/semiconductor mesoscopic systems are discussed.