
We present precise lattice computations for the bquark mass, the quark mass
ratios mb/mc and mb/ms as well as the leptonic Bdecay constants. We employ
gauge configurations with four dynamical quark flavors, up/down, strange and
charm, at three values of the lattice spacing (a ~ 0.06  0.09 fm) and for pion
masses as low as 210 MeV. Interpolation in the heavy quark mass to the bottom
quark point is performed using ratios of physical quantities computed at nearby
quark masses exploiting the fact that these ratios are exactly known in the
static quark mass limit. Our results are also extrapolated to the physical pion
mass and to the continuum limit and read: mb(MSbar, mb) = 4.26(10) GeV, mb/mc =
4.42(8), mb/ms = 51.4(1.4), fBs = 229(5) MeV, fB = 193(6) MeV, fBs/fB =
1.184(25) and (fBs/fB)/(fK/fpi) = 0.997(17).

We present a lattice QCD determination of the vector and scalar form factors
of the semileptonic $K \to \pi \ell \nu$ decay which are relevant for the
extraction of the CKM matrix element $V_{us}$ from experimental data. Our
results are based on the gauge configurations produced by the European Twisted
Mass Collaboration with $N_f = 2+1+1$ dynamical fermions, which include in the
sea, besides two light mass degenerate quarks, also the strange and the charm
quarks. We use data simulated at three different values of the lattice spacing
and with pion masses as small as $210$ MeV. Our final result for the vector
form factor at zero momentum transfer is $f_+(0) = 0.9709 (46)$, where the
uncertainty is both statistical and systematic combined in quadrature. Using
the latest experimental value of $f_+(0) V_{us}$ from $K_{\ell 3}$ decays, we
obtain $V_{us} = 0.2230 (11)$, which allows to test the unitarity constraint
of the Standard Model below the permille level once the determination of
$V_{ud}$ from superallowed nuclear $\beta$ decays is adopted. A slight
tension with unitarity at the level of $\sim 2$ standard deviations is
observed. Moreover we present our results for the semileptonic scalar
$f_0(q^2)$ and vector $f_+(q^2)$ form factors in the whole range of values of
the squared fourmomentum transfer $q^2$ measured in $K_{\ell 3}$ decays,
obtaining a very good agreement with the momentum dependence of the
experimental data. We provide a set of synthetic data points representing our
results for the vector and scalar form factors at the physical point for
several selected values of $q^2$.

We present a lattice QCD determination of the vector and scalar form factors
of the semileptonic decays D>\pi l \nu and D > K l \nu which are relevant for
the extraction of the CKM matrix elements Vcd and Vcs from experimental
data. Our analysis is based on the gauge configurations produced by the
European Twisted Mass Collaboration with Nf = 2+1+1 dynamical fermions. We
simulated at three different values of the lattice spacing and with pion masses
as small as 210 MeV. Our preliminary estimates for the vector form factor at
zero 4momentum transfer are f+(D > \pi)(0) = 0.610 (23) and f+(D > K)(0) =
0.747 (22), where the uncertainties are only statistical. By combining our
results with the experimental values of f+(D > \pi)(0) Vcd and f+(D > K)(0)
Vcs we obtain Vcd = 0.2336 (93) and Vcs = 0.975 (30), which together with
the PDG determination of Vcb are in agreement with the unitarity constraint
of the Standard Model.

We present a lattice QCD determination of the vector and scalar form factors
of the kaon semileptonic decay $K \to \pi \ell \nu$, which is relevant for the
determination of the CKM matrix element $V_{us}$ from experimental data. Our
results are based on the gauge configurations produced by the European Twisted
Mass Collaboration with Nf = 2+1+1 dynamical fermions. We simulated at three
different values of the lattice spacing and with pion masses as small as 210
MeV. Our estimate for the vector form factor at zero 4momentum transfer is
$f_+(0) = 0.9709 (46)$, where the uncertainty is both statistical and
systematic. By combining our result with the latest experimental value of
$f_+(0)V_{us}$ we obtain $V_{us} = 0.2230 (11)$, which satisfies the
unitarity constraint of the Standard Model at the permille level using the
updated determination of $V_{ud}$ coming from superallowed nuclear $\beta$
decays. We present also the momentum dependence of the vector and scalar form
factors in the whole range of values of the squared 4momentum transfer
measured in $K_{\ell 3}$ decays, obtaining a good agreement with the
experimental data.

We present a lattice QCD calculation of the pseudoscalar decay constants fK,
fD and fDs performed using the gauge configurations produced by the European
Twisted Mass Collaboration with Nf = 2 + 1 + 1 dynamical quarks, which include
in the sea, besides two light mass degenerate quarks, also the strange and
charm quarks with masses close to their values in the real world. The
simulations are based on a unitary setup for the two light massdegenerate
quarks and on a mixed action approach for the strange and charm quarks. We use
data simulated at three different values of the lattice spacing in the range
0.06  0.09 fm and at pion masses in the range 210  450 MeV. Our main results
are: fK+ / fpi+ = 1.184 (16), fK+ = 154.4 (2.0) MeV, which incorporate the
leading strong isospin breaking correction due to the up and downquark mass
difference, and fK = 155.0 (1.9) MeV, fD = 207.4 (3.8) MeV, fDs = 247.2 (4.1)
MeV, fDs / fD = 1.192 (22) and (fDs / fD) / (fK / fpi) = 1.003 (14) obtained in
the isospin symmetric limit of QCD. Combined with the experimental measurements
of the leptonic decay rates of kaon, pion, D and Dsmesons our results lead to
the following determination of the CKM matrix elements: Vus = 0.2269 (29),
Vcd = 0.2221 (67) and Vcs = 1.014 (24). Using the latest value of Vud
from superallowed nuclear beta decays the unitarity of the first row of the CKM
matrix is fulfilled at the permille level.

We discuss a lattice QCD computation of the $B$meson decay constants by the
ETM collaboration where suitable ratios allow to reach the bottom quark sector
by combining simulations around the charmquark mass with an exactly known
static limit. The different steps involved in this ratio method are discussed
together with an account of the assessment of various systematic effects. A
comparison of results from simulations with two and four flavour dynamical
quarks is presented.

We present precision lattice calculations of the pseudoscalar decay constants
of the charmed sector as well as determinations of the bottom quark mass and
its ratio to the charm quark mass. We employ Nf=2+1+1 dynamical quark gauge
configurations generated by the European Twisted Mass Collaboration, using data
at three values of the lattice spacing and pion masses as low as 210 MeV.
Strange and charm sea quark masses are close to their physical values.

We present a lattice QCD calculation of the up, down, strange and charm quark
masses performed using the gauge configurations produced by the European
Twisted Mass Collaboration with Nf = 2 + 1 + 1 dynamical quarks, which include
in the sea, besides two light mass degenerate quarks, also the strange and
charm quarks with masses close to their physical values. The simulations are
based on a unitary setup for the two light quarks and on a mixed action
approach for the strange and charm quarks. The analysis uses data at three
values of the lattice spacing and pion masses in the range 210  450 MeV,
allowing for accurate continuum limit and controlled chiral extrapolation. The
quark mass renormalization is carried out nonperturbatively using the RIMOM
method. The results for the quark masses converted to the bar{MS} scheme are:
mud(2 GeV) = 3.70(17) MeV, ms(2 GeV) = 99.6(4.3) MeV and mc(mc) = 1.348(46)
GeV. We obtain also the quark mass ratios ms/mud = 26.66(32) and mc/ms =
11.62(16). By studying the mass splitting between the neutral and charged kaons
and using available lattice results for the electromagnetic contributions, we
evaluate mu/md = 0.470(56), leading to mu = 2.36(24) MeV and md = 5.03(26) MeV.

We present a lattice QCD calculation of the pseudoscalar decay constants
$f_K$, $f_D$ and $f_{D_s}$ performed by the European Twisted Mass Collaboration
with $N_f = 2 + 1 + 1$ dynamical fermions. We simulated at three different
values of the lattice spacing, the smallest being approximately $0.06fm$, and
with pion masses as small as $210$MeV. Our main results are:
$f_{K^+}/f_{\pi^+}=1.183(17)$, $f_{K^+}=154.4(2.1)$MeV,
$f_{D_s}=242.1(8.3)$MeV, $f_D=201.9(8.0)$MeV, $f_{D_s}/f_D=1.199(25)$ and
$(f_{D_s}/f_D) / (f_K/f_\pi) = 1.005(15)$.

We present a lattice QCD determination of the average updown, strange and
charm quark masses based on simulations performed by the European Twisted Mass
Collaboration with $N_f = 2 + 1 + 1$ dynamical fermions. We simulated at three
different values of the lattice spacing, the smallest being approximately
$0.06fm$, and with pion masses as small as $210 \text{MeV}$. Our results are:
$m_{ud}(2\text{GeV})=3.70(17)\text{MeV}$,
$m_s(2\text{GeV})=99.2(3.9)\text{MeV}$, $m_c(m_c)=1.350(49)\text{GeV}$,
$m_s/m_{ud}=26.64(30)$ and $m_c/m_s=11.65(12)$.

We present a lattice QCD determination of the $b$quark mass and of the
$f_{B_s}$ and $f_B$ decay constants performed with $N_f = 2 + 1 + 1$ twisted
mass Wilson fermions. We have used simulations at three values of the lattice
spacing generated by ETMC with pion masses ranging from 210 to 440 MeV. To
obtain physical quantities we performed a combined chiral and continuum limit
and an extrapolation in the heavy quark mass from the charm to the $b$quark
region using suitable ratios calculated at nearby heavyquark masses having an
exactly known static limit. Our results are: $m_b(m_b) = 4.29 (13)$ GeV, $f_B =
196 (9)$ MeV, $f_{B_s} = 235 (9)$ MeV, $f_{B_s} / f_B = 1.201 (25)$,
$(f_{B_s}/f_B)/(f_K/f_\pi) = 1.007 (16)$ and $(f_{B_s}/f_B)/(f_{D_s}/f_D) =
1.008 (13)$.

The performance of the Planck instruments in space is enabled by their low
operating temperatures, 20K for LFI and 0.1K for HFI, achieved through a
combination of passive radiative cooling and three active mechanical coolers.
The scientific requirement for very broad frequency coverage led to two
detector technologies with widely different temperature and cooling needs.
Active coolers could satisfy these needs; a helium cryostat, as used by
previous cryogenic space missions (IRAS, COBE, ISO, Spitzer, AKARI), could not.
Radiative cooling is provided by three Vgroove radiators and a large telescope
baffle. The active coolers are a hydrogen sorption cooler (<20K), a 4He
JouleThomson cooler (4.7K), and a 3He4He dilution cooler (1.4K and 0.1K). The
flight system was at ambient temperature at launch and cooled in space to
operating conditions. The HFI bolometer plate reached 93mK on 3 July 2009, 50
days after launch. The solar panel always faces the Sun, shadowing the rest of
Planck, andoperates at a mean temperature of 384K. At the other end of the
spacecraft, the telescope baffle operates at 42.3K and the telescope primary
mirror operates at 35.9K. The temperatures of key parts of the instruments are
stabilized by both active and passive methods. Temperature fluctuations are
driven by changes in the distance from the Sun, sorption cooler cycling and
fluctuations in gasliquid flow, and fluctuations in cosmic ray flux on the
dilution and bolometer plates. These fluctuations do not compromise the science
data.