• ### Studies of a scheme for Low EMittance Muon Accelerator with production from positrons on target(1803.06696)

March 18, 2018 physics.acc-ph
A study of a new scheme to produce very low emittance muon beams using a positron beam of about 45 GeV interacting on electrons on target is presented. One of the innovative topics to be investigated is the behaviour of the positron beam stored in a low emittance ring with a thin target, that is directly inserted in the ring chamber to produce muons. Muons can be immediately collected at the exit of the target and transported to two mu+ and mu- accumulator rings and then accelerated and injected in muon collider rings. We focus in this paper on the simulation of the e+ beam interacting with the target, the effect of the target on the 6-D phase space and the optimization of the e+ ring design to maximize the energy acceptance. We will investigate the performances of this scheme, ring plus target system, comparing different multi-turn simulations. A preliminary review of the full scheme parameters is discussed in view of the results obtained on the ring plus target system. In addition, a first acceleration scheme is presented together with a possible 14 TeV collider layout.
• ### Novel Double Triple Bend Achromat (DTBA) lattice design for a next generation 3 GeV Synchrotron Light Source(1801.02522)

Jan. 8, 2018 physics.acc-ph
The Double Triple Bend Achromat (DTBA) lattice~\cite{DTBAipac16} is a novel lattice design for a next generation 3 GeV Synchrotron Light Source. Starting from a modification of the Hybrid Multi Bend Achromat (HMBA) lattice~\cite{ESRF} developed at ESRF and inspired by the Double-Double Bend Achromat (DDBA) lattice~\cite{Diamond1, Diamond2} developed at Diamond, DTBA combines the advantages of both cells. The typical MBA lattice cells have one straight section dedicated to an insertion device, whereas this new cell layout has two such drifts, thus increasing the fraction of available space for the installation of insertion devices. The DTBA lattice achieves an emittance of $\sim\mathrm{132~pm}$, a dynamic aperture of $\mathrm{\sim\pm10\pm1~mm}$ (calculated at the injection point), an injection efficiency of $\mathrm{\sim\mathrm88\pm5\%}$ and a lifetime of $\mathrm{1.4\pm0.2~h}$ with errors. The characteristics of DTBA, the methodology and results of the linear and non-linear optics optimisations, with and without the presence of errors, are presented in detail.
• ### Novel proposal for a low emittace muon beam using positron beam on target(1509.04454)

Sept. 15, 2015 physics.acc-ph
Muon beams are customarily obtained via $K/\pi$ decays produced in proton interaction on target. In this paper we investigate the possibility to produce low emittance muon beams from electron-positron collisions at centre-of-mass energy just above the $\mu^{+}\mu^{-}$ production threshold with maximal beam energy asymmetry, corresponding to a positron beam of about 45 GeV interacting on electrons on target. We present the main features of this scheme with an outline of the possible applications.
• ### Operating experience with electron cloud clearing electrodes at DAFNE(1306.5944)

June 25, 2013 physics.acc-ph
During the current run of an electron-positron collider DAFNE special electrodes for electron cloud suppression have been inserted in all dipole and wiggler magnets of the positron ring. In this paper we discuss the impact of these electrodes on beam dynamics and overall collider performance. In particular we report results of measurements such as e-cloud instabilities growth rate, transverse beam size variation, tune shifts along the bunch train etc. with the electrodes switched on and off that clearly indicate the effectiveness of the electrodes for e-cloud suppression.
• In this Technical Design Report (TDR) we describe the SuperB detector that was to be installed on the SuperB e+e- high luminosity collider. The SuperB asymmetric collider, which was to be constructed on the Tor Vergata campus near the INFN Frascati National Laboratory, was designed to operate both at the Upsilon(4S) center-of-mass energy with a luminosity of 10^{36} cm^{-2}s^{-1} and at the tau/charm production threshold with a luminosity of 10^{35} cm^{-2}s^{-1}. This high luminosity, producing a data sample about a factor 100 larger than present B Factories, would allow investigation of new physics effects in rare decays, CP Violation and Lepton Flavour Violation. This document details the detector design presented in the Conceptual Design Report (CDR) in 2007. The R&D and engineering studies performed to arrive at the full detector design are described, and an updated cost estimate is presented. A combination of a more realistic cost estimates and the unavailability of funds due of the global economic climate led to a formal cancelation of the project on Nov 27, 2012.
• ### Proposal for taking data with the KLOE-2 detector at the DA$\Phi$NE collider upgraded in energy(1007.5219)

July 29, 2010 hep-ph, hep-ex
This document reviews the physics program of the KLOE-2 detector at DA$\Phi$NE upgraded in energy and provides a simple solution to run the collider above the $\phi$-peak (up to 2, possibly 2.5 GeV). It is shown how a precise measurement of the multihadronic cross section in the energy region up to 2 (possibly 2.5) GeV would have a major impact on the tests of the Standard Model through a precise determination of the anomalous magnetic moment of the muon and the effective fine-structure constant at the $M_Z$ scale. With a luminosity of about $10^{32}$cm$^{-2}$s$^{-1}$, DA$\Phi$NE upgraded in energy can perform a scan in the region from 1 to 2.5 GeV in one year by collecting an integrated luminosity of 20 pb$^{-1}$ (corresponding to a few days of data taking) for single point, assuming an energy step of 25 MeV. A few years of data taking in this region would provide important tests of QCD and effective theories by $\gamma\gamma$ physics with open thresholds for pseudo-scalar (like the $\eta'$), scalar ($f_0,f'_0$, etc...) and axial-vector ($a_1$, etc...) mesons; vector-mesons spectroscopy and baryon form factors; tests of CVC and searches for exotics. In the final part of the document a technical solution for the energy upgrade of DA$\Phi$NE is proposed.
• ### High luminosity interaction region design for collisions with detector solenoid(1006.1476)

June 8, 2010 physics.acc-ph
An innovatory interaction region has been recently conceived and realized on the Frascati DA{\Phi}NE lepton collider. The concept of tight focusing and small crossing angle adopted until now to achieve high luminosity in multibunch collisions has evolved towards enhanced beam focusing at the interaction point with large horizontal crossing angle, thanks to a new compensation mechanism for the beam-beam resonances. The novel configuration has been tested with a small detector without solenoidal field yielding a remarkable improvement in terms of peak as well as integrated luminosity. The high luminosity interaction region has now been modified to host a large detector with a strong solenoidal field which significantly perturbs the beam optics introducing new design challenges in terms of interaction region optics design, beam transverse coupling control and beam stay clear requirements
• ### Measurement of the luminosity at the DAFNE collider upgraded with the crab waist scheme(0909.1913)

Sept. 10, 2009 hep-ex
The test of the crab waist collision scheme, undergoing at the e+e- Frascati DAFNE accelerator complex since February 2008, requires a fast and accurate measurement of the absolute luminosity, as well as a full characterization of the background conditions. Three different monitors, a Bhabha calorimeter, a Bhabha GEM tracker and a gamma bremsstrahlung proportional counter have been designed, tested and installed around the interaction point end of 2007-beginning of 2008. In this paper, we describe these detectors and present their performances in various operation conditions during the 2008 and 2009 DAFNE runs.
• ### B, D and K decays(0801.1833)

Jan. 11, 2008 hep-ph, hep-ex
With the advent of the LHC, we will be able to probe New Physics (NP) up to energy scales almost one order of magnitude larger than it has been possible with present accelerator facilities. While direct detection of new particles will be the main avenue to establish the presence of NP at the LHC, indirect searches will provide precious complementary information, since most probably it will not be possible to measure the full spectrum of new particles and their couplings through direct production. In particular, precision measurements and computations in the realm of flavour physics are expected to play a key role in constraining the unknown parameters of the Lagrangian of any NP model emerging from direct searches at the LHC. The aim of Working Group 2 was twofold: on one hand, to provide a coherent, up-to-date picture of the status of flavour physics before the start of the LHC; on the other hand, to initiate activities on the path towards integrating information on NP from high-pT and flavour data.
• ### Beam-Beam Issues for Colliding Schemes with Large Piwinski Angle and Crabbed Waist(physics/0702033)

Feb. 5, 2007 physics.acc-ph
Numerical simulations have shown that a recently proposed 'crabbed waist' scheme of beam-beam collisions can substantially increase the luminosity of a collider. In this paper we give a qualitative explanation why this scheme works. For this purpose we use simple geometrical considerations and analyze peculiar properties of vertical motion modulations by synchrotron and horizontal betatron oscillations. It is shown that in the 'crabbed waist' scheme these modulations, which are the main sources of beam-beam resonances excitation, are significantly suppressed. Some numerical examples demonstrating the effect of the crabbed waist collisions are also given.
• ### Wire Compensation of Parasitic Crossings in DAFNE(physics/0607129)

July 13, 2006 physics.acc-ph
Long-range beam-beam interactions (parasitic crossings) are one of the main luminosity performance limitations for the Frascati e+e- Phi-factory DAFNE. In particular, the parasitic crossings lead to a substantial lifetime reduction of both beams in collision. This puts a limit on the maximum storable current and, as a consequence, on the achievable peak and integrated luminosity. In order to alleviate the problem numerical and experimental studies of the parasitic crossings compensation with current-carrying wires have been performed at DAFNE. Two such wires have been installed at both ends of the KLOE interaction region. Switching on the wires in agreement with the numerical predictions, improvement in the lifetime of the 'weak' beam (positrons) has been obtained at the maximum current of the 'strong' one (electrons) without luminosity loss. In this paper we describe the parasitic crossings effects in DAFNE, summarize the results of numerical simulations on their compensation with the wires and discuss the experimental measurements and observations.
• ### DAFNE Experience with Negative Momentum Compaction(physics/0607036)

July 5, 2006 physics.acc-ph
There are several potential advantages for a collider operation with a lattice with negative momentum compaction factor (alfa). Since the lattice of the Frascati e+e- Phi-factory DAFNE is flexible enough to provide collider operation even with alfa < 0, we have exploited this possibility for an experimental study of the beam dynamics. The negative momentum compaction lattices have been successfully implemented and stable 1 A currents have been stored in both electron and positron rings without any problem for RF cavities and feedback systems operation. First collisions have been tested at low currents. In this paper we describe the experimental results and compare them with expectations and numerical simulations. Present limitations to DAFNE operation with alfa < 0 and ways to overcome them are also discussed.
• ### Parameters for a Super-Flavor-Factory(physics/0606034)

June 4, 2006 physics.acc-ph
A Super Flavor Factory, an asymmetric energy e+e- collider with a luminosity of order 10^36 cm-2s-1, can provide a sensitive probe of new physics in the flavor sector of the Standard Model. The success of the PEP-II and KEKB asymmetric colliders in producing unprecedented luminosity above 10^34 cm-2s-1 has taught us about the accelerator physics of asymmetric e+e- colliders in a new parameter regime. Furthermore, the success of the SLAC Linear Collider and the subsequent work on the International Linear Collider allow a new Super-Flavor collider to also incorporate linear collider techniques. This note describes the parameters of an asymmetric Flavor-Factory collider at a luminosity of order 10^36 cm-2s-1 at the Upsilon(4S) resonance and about 10^35 cm-2s-1 at the Tau production threshold. Such a collider would produce an integrated luminosity of about 10,000 fb-1 (10 ab-1) in a running year (10^7 sec) at the Upsilon(4S) resonance.
• ### SuperB: a linear high-luminosity B Factory(physics/0512235)

Dec. 23, 2005 physics.ins-det
This paper is based on the outcome of the activity that has taken place during the recent workshop on "SuperB in Italy" held in Frascati on November 11-12, 2005. The workshop was opened by a theoretical introduction of Marco Ciuchini and was structured in two working groups. One focused on the machine and the other on the detector and experimental issues. The present status on CP is mainly based on the results achieved by BaBar and Belle. Estabilishment of the indirect CP violation in B sector in 2001 and of the direct CP violation in 2004 thanks to the success of PEP-II and KEKB e+e- asymmetric B Factories operating at the center of mass energy corresponding to the mass of the Y(4s). With the two B Factories taking data, the Unitarity Triangle is now beginning to be overconstrained by improving the measurements of the sides and now also of the angles alpha, and gamma. We are also in presence of the very intriguing results about the measurements of sin(2 beta) in the time dependent analysis of decay channels via penguin loops, where b --> s sbar s and b --> s dbar d. Tau physics, in particular LFV search, as well as charm and ISR physics are important parts of the scientific program of a SuperB Factory. The physics case together with possible scenarios for the high luminosity SuperB Factory based on the concepts of the Linear Collider and the related experimental issues are discussed.
• ### Design of a Polarised Positron Source Based on Laser Compton Scattering(physics/0509016)

Sept. 15, 2005 physics.acc-ph
We describe a scheme for producing polarised positrons at the ILC from polarised X-rays created by Compton scattering of a few-GeV electron beam off a CO2 or YAG laser. This scheme is very energy effective using high finesse laser cavities in conjunction with an electron storage ring.
• ### Design considerations for future DAFNE upgrade(physics/0411156)

Nov. 17, 2004 physics.acc-ph
The Frascati F-Factory DAFNE has been delivering luminosity to the KLOE, DEAR and FINUDA experiments since year 2000. Since April 2004 the KLOE run has been resumed and recently peak luminosity of 1.0x1032 cm-2s-1 and integrated luminosity of 6.2 pb-1/day have been achieved. The scientific program of the three high-energy experiments sharing DAFNE operation will be completed approximately by the end of year 2006. A scientific program for DAFNE beyond that date has not been defined yet and it is matter of discussion in the high-energy physics and accelerator physics communities. In this paper we present some future scenarios for DAFNE, discussing the expected ultimate performances of the machine as it is now and addressing the design for an energy and/or luminosity upgrade. The options presented in the following are not exhaustive and they are intended to give a glance of what is doable using the existing infrastructures.
• ### DAFNE operation with the FINUDA experiment(physics/0408073)

Aug. 16, 2004 physics.acc-ph
DAFNE operation restarted in September 2003, after a six month shut-down for the installation of FINUDA, a magnetic detector dedicated to the study of hypernuclear physics. FINUDA is the third experiment running on DAFNE and operates while keeping on place the other detector KLOE. During the shut-down both Interaction Regions have been equipped with remotely controlled quadrupoles in order to operate at different solenoid fields. Among many other hardware upgrades one of the most significant is the reshaping of the wiggler pole profile to improve the field quality and the machine dynamic aperture. Commissioning of the collider in the new configuration has been completed in short time. The peak luminosity delivered to FINUDA has reached 6 10^31 s-1cm-2, with a daily integrated value close to 4 pb-1.
• ### DAFNE(physics/0403014)

May 25, 2004 physics.acc-ph
The results of 2002 DAFNE operation for the two experiments KLOE and DEAR are described. During 2003 a long shutdown has been dedicated to the installation of new Interaction Regions (IR) and to hardware modifications and upgrades. In the last section optics studies and performances expectations for the new machine configuration are reported.
• ### Strong RF focusing for luminosity increase: short bunches at the IP(physics/0404020)

April 5, 2004 physics.acc-ph
One of the key-issues to increase the luminosity in the next generation particle factories is to reduce the bunch length at the interaction point (IP) as much as possible. This will allow reducing proportionally the transverse beta functions at the IP and increasing the luminosity by the same factor. The strong RF focusing consists in obtaining short bunches by substantially increasing the lattice momentum compaction and the RF gradient. In this regime the bunch length is modulated along the ring and could be minimized at the IP. If the principal impedance generating elements of the ring are located where the bunch is long (in the RF cavities region) it is possible to avoid microwave instability and excessive bunch lengthening due to the potential well distortion.
• ### Strong RF Focusing for Luminosity Increase(physics/0309066)

Sept. 15, 2003 physics.acc-ph
A luminosity of a circular collider can be increased by squeezing the bunch length at the interaction point (IP). A natural way to decrease the bunch length is to decrease the momentum compaction factor and/or to increase the RF voltage. However, in such a way we cannot obtain short bunches with high currents since wakefields prevent this due to the potential well distortion and the microwave instability. In present paper we propose to use a strong RF focusing (with high RF voltage and high momentum compaction factor) to obtain very short bunches at the IP with progressive bunch elongation towards the RF cavity. This allows placing the most important impedance generating elements near the RF cavity where the bunch is longest thus minimizing the effect of the wakefields.
• ### Tuning Knobs for the NLC Final Focus(physics/0206068)

June 18, 2002 physics.acc-ph
Compensation of optics errors at the Interaction Point (IP) is essential for maintaining maximum luminosity at the NLC. Several correction systems (knobs) using the Final Focus sextupoles have been designed to provide orthogonal compensation of linear and the second order optics aberrations at IP. Tuning effects of these knobs on the 250 GeV beam were verified using tracking simulations.
• ### NLC Luminosity as a Function of Beam Parameters(physics/0206044)

June 14, 2002 physics.acc-ph
Realistic calculation of NLC luminosity has been performed using particle tracking in DIMAD and beam-beam simulations in GUINEA-PIG code for various values of beam emittance, energy and beta functions at the Interaction Point (IP). Results of the simulations are compared with analytic luminosity calculations. The optimum range of IP beta functions for high luminosity was identified.
• ### TESLA Technical Design Report, Part VI, Chapter 1: The Photon Collider at TESLA(hep-ex/0108012)

TESLA Technical Design Report, Part VI, Chapter 1: The Photon Collider at TESLA
• ### Feedback Systems for Linear Colliders(physics/0107020)

July 10, 2001 physics.acc-ph
Feedback systems are essential for stable operation of a linear collider, providing a cost-effective method for relaxing tight tolerances. In the Stanford Linear Collider (SLC), feedback controls beam parameters such as trajectory, energy, and intensity throughout the accelerator. A novel dithering optimization system which adjusts final focus parameters to maximize luminosity contributed to achieving record performance in the 1997-98 run. Performance limitations of the steering feedback have been investigated, and improvements have been made. For the Next Linear Collider (NLC), extensive feedback systems are planned as an intregal part of the design. Feedback requiremetns for JLC (the Japanese Linear Collider) are essentially identical to NLC; some of the TESLA requirements are similar but there are significant differences. For NLC, algorithms which incorporate improvements upon the SLC implementation are being prototyped. Specialized systems for the damping rings, rf and interaction point will operate at high bandwidth and fast response. To correct for the motion of individual bunches within a train, both feedforward and feedback systems are planned. SLC experience has shown that feedback systems are an invaluable operational tool for decoupling systems, allowing precision tuning, and providing pulse-to-pulse diagnostics. Feedback systems for the NLC will incorporate the key SLC features and the benefits of advancing technologies.
• ### Beam-based Feedback Simulations for the NLC Linac(physics/0009005)

Sept. 1, 2000 physics.acc-ph
Extensive beam-based feedback systems are planned as an integral part of the Next Linear Collider (NLC) control system. Wakefield effects are a significant influence on the feedback design, imposing both architectural and algorithmic constraints. Studies are in progress to assure the optimal selection of devices and to refine and confirm the algorithms for the system design. We show the results of initial simulations, along with evaluations of system response for various conditions of ground motion and other operational disturbances.