• ### The Murchison Widefield Array Commissioning Survey: A Low-Frequency Catalogue of 14,110 Compact Radio Sources over 6,100 Square Degrees(1410.0790)

Oct. 3, 2014 astro-ph.IM
We present the results of an approximately 6,100 square degree 104--196MHz radio sky survey performed with the Murchison Widefield Array during instrument commissioning between 2012 September and 2012 December: the Murchison Widefield Array Commissioning Survey (MWACS). The data were taken as meridian drift scans with two different 32-antenna sub-arrays that were available during the commissioning period. The survey covers approximately 20.5 h < Right Ascension (RA) < 8.5 h, -58 deg < Declination (Dec) < -14 deg over three frequency bands centred on 119, 150 and 180 MHz, with image resolutions of 6--3 arcmin. The catalogue has 3-arcmin angular resolution and a typical noise level of 40 mJy/beam, with reduced sensitivity near the field boundaries and bright sources. We describe the data reduction strategy, based upon mosaiced snapshots, flux density calibration and source-finding method. We present a catalogue of flux density and spectral index measurements for 14,110 sources, extracted from the mosaic, 1,247 of which are sub-components of complexes of sources.
• ### Rotation measure variations for 20 millisecond pulsars(1105.4213)

May 21, 2011 astro-ph.SR
We report on variations in the mean position angle of the 20 millisecond pulsars being observed as part of the Parkes Pulsar Timing Array (PPTA) project. It is found that the observed variations are dominated by changes in the Faraday rotation occurring in the Earth's ionosphere. Two ionospheric models are used to correct for the ionospheric contribution and it is found that one based on the International Reference Ionosphere gave the best results. Little or no significant long-term variation in interstellar RM was found with limits typically about 0.1 rad m$^{-2}$ yr$^{-1}$ in absolute value. In a few cases, apparently significant RM variations over timescales of a few 100 days or more were seen. These are unlikely to be due to localised magnetised regions crossing the line of sight since the implied magnetic fields are too high. Most probably they are statistical fluctuations due to random spatial and temporal variations in the interstellar electron density and magnetic field along the line of sight.
• ### Polarization observations of 20 millisecond pulsars(1102.2274)

Feb. 11, 2011 astro-ph.SR
Polarization profiles are presented for 20 millisecond pulsars that are being observed as part of the Parkes Pulsar Timing Array project. The observations used the Parkes multibeam receiver with a central frequency of 1369 MHz and the Parkes digital filterbank pulsar signal-processing system PDFB2. Because of the large total observing time, the summed polarization profiles have very high signal/noise ratios and show many previously undetected profile features. Thirteen of the 20 pulsars show emission over more than half of the pulse period. Polarization variations across the profiles are complex and the observed position angle variations are generally not in accord with the rotating-vector model for pulsar polarization. Never-the-less, the polarization properties are broadly similar to those of normal (non-millisecond) pulsars, suggesting that the basic radio emission mechanism is the same in both classes of pulsar. The results support the idea that radio emission from millisecond pulsars originates high in the pulsar magnetosphere, probably close to the emission regions for high-energy X-ray and gamma-ray emission. Rotation measures were obtained for all 20 pulsars, eight of which had no previously published measurements.
• ### All-Stokes Parameterization of the Main Beam and First Sidelobe for the Arecibo Radio Telescope(astro-ph/0107349)

July 18, 2001 astro-ph
We describe a scheme that characterizes the main beam and sidelobe in all Stokes parameters employing parameters that allow reconstruction of the complete beam patterns and, also, afford an easy way to see how the beam changes with azimuth, zenith angle, and time. For the main beam in Stokes I the parameters include the beam width, ellipticity and its orientation, coma and its orientation, the point-source gain, the integrated gain (or, equivalently, the main beam efficiency); for the other Stokes parameters the beam parameters include beam squint and beam squash. For the first sidelobe ring in Stokes I the parameters include an 8-term Fourier series describing the height, radius, and radial width; for the other Stokes parameters they include only the sidelobe's fractional polarization. We illustrate the technique by applying it to the Arecibo telescope. The main beam width is smaller and the sidelobe levels higher than for a uniformly-illuminated aperture of the same effective area. These effects are modeled modestly well by a blocked aperture, with the blocked area equal to about 10% of the effective area (this corresponds to 5% physical blockage). In polarized emission, the effects of beam squint (difference in pointing direction between orthogonal polarizations) and squash (difference in beamwidth between orthogonal polarizations) do not correspond to theoretical expectation and are higher than expected; these effects are almost certainly caused by the blockage. The first sidelobe is highly polarized because of blockage.
• ### Mueller Matrix Parameters for Radio Telescopes and their Observational Determination(astro-ph/0107352)

July 18, 2001 astro-ph
Modern digital crosscorrelators permit the simultaneous measurement of all four Stokes parameters. However, the results must be calibrated to correct for the polarization transfer function of the receiving system. The transfer function for any device can be expressed by its Mueller matrix. We express the matrix elements in terms of fundamental system parameters that describe the voltage transfer functions (known as the Jones matrix) of the various system devices in physical terms and thus provide a means for comparing with engineering calculations and investigating the effects of design changes. We describe how to determine these parameters with astronomical observations. We illustrate the method by applying it to some of the receivers at the Arecibo Observatory.