• We have investigated the generation of spin waves in the free layer of an extended spin-valve structure with a nano-scaled point contact driven by both microwave and direct electric current using Brillouin light scattering microscopy. Simultaneously with the directly excited spin waves, strong nonlinear effects are observed, namely the generation of eigenmodes with integer multiple frequencies (2 \emph{f}, 3 \emph{f}, 4 \emph{f}) and modes with non-integer factors (0.5 \emph{f}, 1.5 \emph{f}) with respect to the excitation frequency \emph{f}. The origin of these nonlinear modes is traced back to three magnon scattering processes. The direct current influence on the generation of the fundamental mode at frequency \emph{f} can be related to the spin-transfer torque, while the efficiency of three-magnon-scattering processes is controlled by the Oersted field as an additional effect of the direct current.
  • The thermal spin-wave distribution in a Ni81Fe19 stripe with an asymmetric transverse domain wall has been investigated using Brillouin light scattering microscopy. Clear evidence has been found that the existence of the domain wall influences the spin-wave distribution of the thermal modes. The thermal spin-wave modes are quantized due to the confinement in radial direction. They vanish near the domain wall and a new mode evolves inside this complex domain wall structure. This effect is attributed to a change of the effective internal field in the domain wall region. The experimental results agree well with static and dynamic micromagnetic simulations.
  • The spatial profiles and the dissipation characteristics of spin-wave quasi-eigenmodes are investigated in small magnetic Ni$_{81}$Fe$_{19}$ ring structures using Brillouin light scattering microscopy. It is found, that the decay constant of a mode decreases with increasing mode frequency. Indications for a contribution of three-magnon processes to the dissipation of higher-order spin-wave quasi-eigenmodes are found.
  • The formation and field response of head-to-head domain walls in curved permalloy wires, fabricated to contain a single anti-notch, have been investigated using Lorentz microscopy. High spatial resolution maps of the vector induction distribution in domain walls close to the anti-notch have been derived and compared with micromagnetic simulations. In wires of 10 nm thickness the walls are typically of a modified asymmetric transverse wall type. Their response to applied fields tangential to the wire at the anti-notch location was studied. The way the wall structure changes depends on whether the field moves the wall away from or further into the notch. Higher fields are needed and much more distorted wall structures are observed in the latter case, indicating that the anti-notch acts as an energy barrier for the domain wall.