-
We report results on the studies of the $e^+e^-\to B_s^{(*)}\bar{B}_s^{(*)}$
processes. The results are based on a $121.4$ fb$^{-1}$ data sample collected
with the Belle detector at the center-of-mass energy near the $\Upsilon(10860)$
peak and $16.4$ fb$^{-1}$ of data collected at 19 energy points in the range
from 10.77 to 11.02 GeV. We observe a clear $e^+e^-\to\Upsilon(10860)\to
B_s^{(*)}\bar{B}_s^{(*)}$ signal, with no statistically significant signal of
$e^+e^-\to \Upsilon(11020)\to B_s^{(*)}\bar{B}_s^{(*)}$. The relative
production ratio of $B_s^*\bar{B}_s^*$, $B_s\bar{B}_s^{*}$, and $B_s\bar{B}_s$
final states at $\sqrt{s}=10.866$ GeV is measured to be $7:$
$0.856\pm0.106(stat.)\pm0.053(syst.):$
$0.645\pm0.094(stat.)^{+0.030}_{-0.033}(syst.)$. An angular analysis of the
$B_s^*\bar{B}_s^*$ final state produced at the $\Upsilon(10860)$ peak is also
performed.
-
We present a precise measurement of the CP violation parameter sin2phi_1 and
the direct CP violation parameter A_f using the final data sample of 772x10^6
B\bar B pairs collected at the Upsilon(4S) resonance with the Belle detector at
the KEKB asymmetric-energy e+e- collider. One neutral B meson is reconstructed
in a J/psi K0S, psi(2S) K0S, chi_c1 K0S or J/psi K0L CP-eigenstate and its
flavor is identified from the decay products of the accompanying B meson. From
the distribution of proper time intervals between the two B decays, we obtain
the following CP violation parameters:
sin2phi_1=0.667+-0.023(stat)+-0.012(syst) and
A_f=0.006+-0.016(stat)+-0.012(syst).
-
In order to develop a long-lifetime MCP-PMT under high rates of circumstance,
we investigated the degradation of the quantum efficiency (QE) of PMT's with a
multialkali photocathode. We found that not only positive ions, but also
neutral residual gases would damage the photocathode resulting in an
enhancement of the work function; their countermeasures were established in
newly manufactured square-shaped MCP-PMT's with 4 or 4x4 multi-anodes. The
performances of the PMT's were measured: QE was stable up to an integrated
amount of anode output charge of 2-3 C/cm^2, while keeping other basic
performances steady, such as the time resolution for single photons of ~40 ps,
a photoelectron collection efficiency (CE) of 60%, a multiplication gain (G) of
a few x 10^6, and dark counts of 20-300 Hz. The causes of QE degradation are
discussed.
-
We report a first measurement of inclusive B -> X_s eta decays, where X_s is
a charmless state with unit strangeness. The measurement is based on a
pseudo-inclusive reconstruction technique and uses a sample of 657 x 10^6
BB-bar pairs accumulated with the Belle detector at the KEKB e^+e^- collider.
For M_{X_s} < 2.6 GeV/c^2, we measure a branching fraction of (26.1 +/- 3.0
(stat) +1.9 -2.1 (syst) +4.0 -7.1 (model)) x 10^-5 and a direct CP asymmetry of
A_{CP} = -0.13 +/- 0.04 +0.02 -0.03. Over half of the signal occurs in the
range M_{X_s} > 1.8 GeV/c^2.
-
We have developed a 4-channel multi-anode MCP-PMT, SL10, which exhibits a
performance of sigma_TTS ~ 30 ps for single photons with G ~ 10^6 and QE=20%
under a magnetic field of B <= 1.5 T. The cross-talk among anodes has been
extensively studied. We have taken two measures to suppress it: one is to
configure the SL10 to an effectively independent 4 small pieces of MCP-PMT's by
segmenting an electrode of the second MCP-layer; the other is to use a constant
fractional discriminator. Remarkable improvement has been achieved.