• Streaking of photoelectrons with optical lasers has been widely used for temporal characterization of attosecond extreme ultraviolet pulses. Recently, this technique has been adapted to characterize femtosecond x-ray pulses in free-electron lasers with the streaking imprinted by farinfrared and Terahertz (THz) pulses. Here, we report successful implementation of THz streaking for time-stamping of an ultrashort relativistic electron beam of which the energy is several orders of magnitude higher than photoelectrons. Such ability is especially important for MeV ultrafast electron diffraction (UED) applications where electron beams with a few femtosecond pulse width may be obtained with longitudinal compression while the arrival time may fluctuate at a much larger time scale. Using this laser-driven THz streaking technique, the arrival time of an ultrashort electron beam with 6 fs (rms) pulse width has been determined with 1.5 fs (rms) accuracy. Furthermore, we have proposed and demonstrated a non-invasive method for correction of the timing jitter with femtosecond accuracy through measurement of the compressed beam energy, which may allow one to advance UED towards sub-10 fs frontier far beyond the ~100 fs (rms) jitter.
  • The intense demands for higher data rates and ubiquitous network coverage have raised the stakes on developing new network topology and architecture to meet these ever-increasing demands in a cost-effective manner. The telecommunication industry and international standardization bodies have placed considerable attention to the deployment of ultra-dense heterogeneous small-scale cells over existing cellular systems. Those small-scale cells, although provide higher data rates and better indoor coverage by reducing the distance between base stations (BSs) and end users, have raised severe configuration concerns. As the deployments are becoming irregular and flexible, inappropriate configurations occur frequently and undermine the network reliability and service quality. We envision that the fine-grained characterization of user traffic is a key pillar to diagnosing inappropriate configurations. In this article, we investigate the fine-grained traffic patterns of mobile users by analyzing the network data containing millions of subscribers and covering thousands of cells in a large metropolitan area. We characterize traffic patterns and mobility behaviors of users and geospatial properties of cells, and discuss how the heterogeneity of these characteristics affects network configurations and diagnosis in future ultra-dense small cells. Based on these observations from our measurements, we investigate possible models and corresponding challenges, and propose a heterogeneity-aware scheme that takes into account the disparity of user mobility behaviors and geospatial properties among small cells.
  • In this paper, we prove a theorem on tight paths in convex geometric hypergraphs, which is asymptotically sharp in infinitely many cases. Our geometric theorem is a common generalization of early results of Hopf and Pannwitz, Sutherland, Kupitz and Perles for convex geometric graphs, as well as the classical Erd\H{o}s-Gallai Theorem for graphs. As a consequence, we obtain the first substantial improvement on the Tur\'{a}n problem for tight paths in uniform hypergraphs.
  • Accelerator-based MeV ultrafast electron microscope (MUEM) has been proposed as a promising tool to study structural dynamics at the nanometer spatial scale and picosecond temporal scale. Here we report experimental tests of a prototype MUEM where high quality images with nanoscale fine structures were recorded with a pulsed 3 MeV picosecond electron beam. The temporal and spatial resolution of the MUEM operating in single-shot mode is about 4 ps (FWHM) and 100 nm (FWHM), corresponding to a temporal-spatial resolution of 4e-19 s*m, about 2 orders of magnitude higher than that achieved with state-of-the-art single-shot keV UEM. Using this instrument we offer the demonstration of visualizing the nanoscale periodic spatial modulation of an electron beam, which may be converted into longitudinal density modulation through emittance exchange to enable production of high-power coherent radiation at short wavelengths. Our results mark a great step towards single-shot nanometer-resolution MUEMs and compact intense x-ray sources that may have wide applications in many areas of science.
  • Coulomb interaction between charged particles is a well-known phenomenon in many areas of researches. In general the Coulomb repulsion force broadens the pulse width of an electron bunch and limits the temporal resolution of many scientific facilities such as ultrafast electron diffraction and x-ray free-electron lasers. Here we demonstrate a scheme that actually makes use of Coulomb force to compress a relativistic electron beam. Furthermore, we show that the Coulomb-driven bunch compression process does not introduce additional timing jitter, which is in sharp contrast to the conventional radio-frequency buncher technique. Our work not only leads to enhanced temporal resolution in electron beam based ultrafast instruments that may provide new opportunities in probing material systems far from equilibrium, but also opens a promising direction for advanced beam manipulation through self-field interactions.
  • In this paper, we focus on the design of low complexity hybrid analog/digital precoding and diversity combining in the millimeter wave multiple-input multiple-output (MIMO) systems. Firstly, by exploiting the sparseness property of the millimeter wave in the angular domain, we propose a spatial lobes division (SLD) to group the total paths of the millimeter wave channel into several spatial lobes, where the paths in each spatial lobe form a low-rank sub-channel matrix. Secondly, based on the SLD operation, we propose a low complexity hybrid precoding scheme, named HYP-SLD. Specifically, for each low-rank sub-channel matrix, we formulate the hybrid precoding design as a sparse reconstruction problem, and decouple the design of the analog and digital precoding matrices to obtain the near-optimal solution. Simulation results demonstrate that, the proposed HYP-SLD scheme reduces by 99% the complexity of the classic orthogonal matching pursuit (OMP) scheme, and achieves similar spectral efficiency and bit error rate (BER) performances compared with the fully digital precoding scheme. Finally, we further propose a maximum ratio combining (MRC) based diversity combining scheme, named HYP-SLD-MRC, to improve the BER performance. Simulation results also show that, the BER performance of the proposed HYP-SLD-MRC scheme outperforms the fully digital precoding scheme.
  • In this paper, we focus on the design of the hybrid analog/digital precoding in millimeter wave multiple-input multiple-output (MIMO) systems. To reduce the feedback overhead, we propose two non-uniform quantization (NUQ) codebook based hybrid precoding schemes for two main hybrid precoding implementations, i.e., the full-connected structure and the sub-connected structure. Specifically, we firstly group the angles of the arrive/departure (AOAs/AODs) of the scattering paths into several spatial lobes by exploiting the sparseness property of the millimeter wave in the angular domain, which divides the total angular domain into effective spatial lobes' coverage angles and ineffective coverage angles. Then, we map the quantization bits non-uniformly to different coverage angles and construct NUQ codebooks, where high numbers of quantization bits are employed for the effective coverage angles to quantize AoAs/AoDs and zero quantization bit is employed for ineffective coverage angles. Finally, two low-complexity hybrid analog/digital precoding schemes are proposed based on NUQ codebooks. Simulation results demonstrate that, the proposed two NUQ codebook based hybrid precoding schemes achieve near-optimal spectral efficiencies and show the superiority in reducing the feedback overhead compared with the uniform quantization (UQ) codebook based works, e.g., at least 12.5% feedback overhead could be reduced for a system with 144/36 transmitting/receiving antennas.
  • In this paper, we consider the problem of preamble design in multiple-input multiple-output (MIMO) systems employing offset quadrature amplitude modulation based filter bank multicarrier (OQAM/FBMC) and propose a preamble optimization method for the frequency division multiplexing (FDM)-structured preamble. Specifically, we formulate an optimization problem to determine the frequency division multiplexed preambles, where the objective is to minimize the mean square error (MSE) of the channel estimation, subject to the constraint on the transmit energy. For two transmit antennas, we find the relationship between preambles and the intrinsic interference from neighboring symbols to achieve the minimum channel estimation MSE, and derive the optimal closed-form solution. For more than two transmit antennas, the constrained preamble optimization problem is nonconvex quadratic. Therefore, we convert the original optimization problem into a quadratically constrained quadratic program (QCQP) and obtain the suboptimal solution by relaxing the nonconvex constraint. Simulation results demonstrate that, in terms of MSE and bit error rate (BER) performances, the proposed method outperforms the conventional FDM preamble design method at all signal-to-noise ratio (SNR) regimes and outperforms the interference approximation method-complex (IAM-C) preamble design method at low to medium SNR regimes with lower preamble overhead.
  • On-body devices are an intrinsic part of the Internet-of-Things (IoT) vision to provide human-centric services. These on-body IoT devices are largely embedded devices that lack a sophisticated user interface to facilitate traditional Pre-Shared Key based security protocols. Motivated by this real-world security vulnerability, this paper proposes SecureTag, a system designed to add defense in depth against active attacks by integrating physical layer (PHY) information with upper-layer protocols. The underpinning of SecureTag is a signal processing technique that extracts the peculiar propagation characteristics of creeping waves to discern on-body devices. Upon overhearing a suspicious transmission, SecureTag initiates a PHY-based challenge-response protocol to mitigate attacks. We implement our system on different commercial off-the-shelf (COTS) wearables and a smartphone. Extensive experiments are conducted in a lab, apartments, malls, and outdoor areas, involving 12 volunteer subjects of different age groups, to demonstrate the robustness of our system. Results show that our system can mitigate 96.13% of active attack attempts while triggering false alarms on merely 5.64% of legitimate traffic.
  • Recent years have seen proliferation in versatile mobile devices and an upsurge in the growth of data-consuming application services. Orthogonal multiple access (OMA) technologies in today's mobile systems fall inefficient in the presence of such massive connectivity and traffic demands. In this regards, non-orthogonal multiple access (NOMA) has been advocated by the research community to embrace unprecedented requirements. Current NOMA designs have been demonstrated to largely improve conventional system performance in terms of throughput and latency, while their impact on the end users' perceived experience has not yet been comprehensively understood. We envision that quality-of-experience (QoE) awareness is a key pillar for NOMA designs to fulfill versatile user demands in the 5th generation (5G) wireless communication systems. This article systematically investigates QoE-aware NOMA designs that translate the physical-layer benefits of NOMA to the improvement of users' perceived experience in upper layers. We shed light on design principles and key challenges in realizing QoE-aware NOMA designs. With these principles and challenges in mind, we develop a general architecture with a dynamic network scheduling scheme. We provide some implications for future QoE-aware NOMA designs by conducting a case study in video streaming applications.
  • Existing works have widely studied relay-aided underwater acoustic networks under some specialized relay distributions, e.g., equidistant and rectangular-grid. In this paper, we investigate two fundamental problems that under which conditions a relay should be deployed and where to deploy it if necessary in terms of the energy and delay performance in linear underwater acoustic networks. To address these two problems, we first accurately approximate the complicated effective bandwidth and transmit power in the logarithm domain to formulate an energy minimization problem. By analyzing the formulation, we discover a critical transmission distance, defined as open distance, and explicitly show that a relay should not be deployed if the transmission distance is less than the open distance and should be otherwise. Most importantly, we derive a closed-form and easy-to-calculate expression for the open distance and also strictly prove that the optimal placing position is at the middle point of the link when a relay should be introduced. Moreover, although this paper considers a linear two-hop relay network as the first step, our derived results can be applied to construct energy-efficient and delay-friendly multi-hop networks. Simulation results validate our theoretical analysis and show that properly introducing a relay can dramatically reduce the network energy consumption almost without increasing the end-to-end delay.
  • The conventional high-speed Wi-Fi has recently become a contender for low-power Internet-of-Things (IoT) communications. OFDM continues its adoption in the new IoT Wi-Fi standard due to its spectrum efficiency that can support the demand of massive IoT connectivity. While the IoT Wi-Fi standard offers many new features to improve power and spectrum efficiency, the basic physical layer (PHY) structure of transceiver design still conforms to its conventional design rationale where access points (AP) and clients employ the same OFDM PHY. In this paper, we argue that current Wi-Fi PHY design does not take full advantage of the inherent asymmetry between AP and IoT. To fill the gap, we propose an asymmetric design where IoT devices transmit uplink packets using the lowest power while pushing all the decoding burdens to the AP side. Such a design utilizes the sufficient power and computational resources at AP to trade for the transmission (TX) power of IoT devices. The core technique enabling this asymmetric design is that the AP takes full power of its high clock rate to boost the decoding ability. We provide an implementation of our design and show that it can reduce the IoT's TX power by boosting the decoding capability at the receivers.
  • In this paper, we investigate the problem of minimizing the long-term total cost (i.e., the sum of energy cost and thermal discomfort cost) associated with a Heating, Ventilation, and Air Conditioning (HVAC) system of a multizone commercial building under smart grid environment. To be specific, we first formulate a stochastic program to minimize the time average expected total cost with the consideration of uncertainties in electricity price, outdoor temperature, the most comfortable temperature level, and external thermal disturbance. Due to the existence of temporally and spatially coupled constraints as well as unknown information about the future system parameters, it is very challenging to solve the formulated problem. To this end, we propose a realtime HVAC control algorithm based on the framework of Lyapunov optimization techniques without the need to predict any system parameters and know their stochastic information. The key idea of the proposed algorithm is to construct and stabilize virtual queues associated with indoor temperatures of all zones. Moreover, we provide a distributed implementation of the proposed realtime algorithm with the aim of protecting user privacy and enhancing algorithmic scalability. Extensive simulation results based on real-world traces show that the proposed algorithm could reduce energy cost effectively with small sacrifice in thermal comfort.
  • Machine learning (ML) has been widely applied to the upper layers of wireless communication systems for various purposes, such as deployment of cognitive radio and communication network. However, its application to the physical layer is hampered by sophisticated channel environments and limited learning ability of conventional ML algorithms. Deep learning (DL) has been recently applied for many fields, such as computer vision and natural language processing, given its expressive capacity and convenient optimization capability. The potential application of DL to the physical layer has also been increasingly recognized because of the new features for future communications, such as complex scenarios with unknown channel models, high speed and accurate processing requirements; these features challenge conventional communication theories. This paper presents a comprehensive overview of the emerging studies on DL-based physical layer processing, including leveraging DL to redesign a module of the conventional communication system (for modulation recognition, channel decoding, and detection) and replace the communication system with a radically new architecture based on an autoencoder. These DL-based methods show promising performance improvements but have certain limitations, such as lack of solid analytical tools and use of architectures that are specifically designed for communication and implementation research, thereby motivating future research in this field.
  • Materials with massless Dirac fermions can possess exceptionally strong and widely tunable optical nonlinearities. Experiments on graphene monolayer have indeed found very large third-order nonlinear responses, but the reported variation of the nonlinear optical coefficient by orders of magnitude is not yet understood. A large part of the difficulty is the lack of information on how doping or chemical potential affects the different nonlinear optical processes. Here we report the first experimental study, in corroboration with theory, on third harmonic generation (THG) and four-wave mixing (FWM) in graphene that has its chemical potential tuned by ion-gel gating. THG was seen to have enhanced by ~30 times when pristine graphene was heavily doped, while difference-frequency FWM appeared just the opposite. The latter was found to have a strong divergence toward degenerate FWM in undoped graphene, leading to a giant third-order nonlinearity. These truly amazing characteristics of graphene come from the possibility to gate-control the chemical potential, which selectively switches on and off one- and multi-photon resonant transitions that coherently contribute to the optical nonlinearity, and therefore can be utilized to develop graphene-based nonlinear optoelectronic devices.
  • The vast volume of marine wireless sampling data and its continuously explosive growth herald the coming of the era of marine wireless big data. Two challenges imposed by these data are how to fast, reliably, and sustainably deliver them in extremely hostile marine environments and how to apply them after collection. In this article, we first propose an architecture of heterogeneous marine networks that flexibly exploits the existing underwater wireless techniques as a potential solution for fast data transmission. We then investigate the possibilities of and develop the schemes for energy-efficient and reliable undersea transmission without or slightly with data rate reduction. After discussing the data transmission, we summarize the possible applications of the collected big data and particularly focus on the problems of applying these data in sea-surface object detection and marine object recognition. Open issues and challenges that need to be further explored regarding transmission and detection/recognition are also discussed in the article.
  • As a flexible and scalable architecture, heterogeneous cloud radio access networks (H-CRANs) inject strong vigor into the green evolution of current wireless networks. But the brutal truth is that energy efficiency (EE) improves at the cost of other indexes such as spectral efficiency (SE), fairness, and delay. It is thus important to investigate performance tradeoffs for striking flexible balances between energy-efficient transmission and excellent quality-of-service (QoS) guarantees under this new architecture. In this article, we first propose some potential techniques to energy-efficiently operate H-CRANs by exploiting their features. We then elaborate the initial ideas of modeling three fundamental tradeoffs, namely EE-SE, EE-fairness, and EE-delay tradeoffs, when applying these green techniques, and present open issues and challenges for future investigations. These related results are expected to shed light on green operation of H-CRANs from adaptive resource allocation, intelligent network control, and scalable network planning.
  • Ultra-dense heterogeneous networks (Ud-HetNets) have been put forward to improve the network capacity for next-generation wireless networks. However, counter to the 5G vision, ultra-dense deployment of networks would significantly increase energy consumption and thus decrease network energy efficiency suffering from the conventional worst-case network design philosophy. This problem becomes particularly severe when Ud-HetNets meet big data because of the traditional reactive request-transmit service mode. In view of these, this article first develops a big-data-aware artificial intelligent based framework for energy-efficient operations of Ud-HetNets. Based on the framework, we then identify four promising techniques, namely big data analysis, adaptive base station operation, proactive caching, and interference-aware resource allocation, to reduce energy cost on both large and small scales. We further develop a load-aware stochastic optimization approach to show the potential of our proposed framework and techniques in energy conservation. In a nutshell, we devote to constructing green Ud-HetNets of big data with the abilities of learning and inferring by improving the flexibility of control from worst-case to adaptive design and shifting the manner of services from reactive to proactive modes.
  • In this paper, we investigate the problem of minimizing the sum of energy cost and thermal discomfort cost in a long-term time horizon for a sustainable smart home with a Heating, Ventilation, and Air Conditioning (HVAC) load. Specifically, we first formulate a stochastic program to minimize the time average expected total cost with the consideration of uncertainties in electricity price, outdoor temperature, renewable generation output, electrical demand, the most comfortable temperature level, and home occupancy state. Then, we propose an online energy management algorithm based on the framework of Lyapunov optimization techniques without the need to predict any system parameters. The key idea of the proposed algorithm is to construct and stabilize four queues associated with indoor temperature, electric vehicle charging, and energy storage. Moreover, we theoretically analyze the feasibility and performance guarantee of the proposed algorithm. Extensive simulations based on real-world traces show the effectiveness of the proposed algorithm.
  • We study the lattice point problem associated with a special class of high-dimensional finite type domains via estimating the Fourier transforms of corresponding indicator functions.
  • In this paper, we intend to reduce the operational cost of cloud data centers with the help of fog devices, which can avoid the revenue loss due to wide-area network propagation delay and save network bandwidth cost by serving nearby cloud users. Since fog devices may not be owned by a cloud service provider, they should be compensated for serving the requests of cloud users. When taking economical compensation into consideration, the optimal number of requests processed locally by each fog device should be decided. As a result, existing load balancing schemes developed for cloud data centers can not be applied directly and it is very necessary to redesign a cost-ware load balancing algorithm for the fog-cloud system. To achieve the above aim, we first formulate a fog-assisted operational cost minimization problem for the cloud service provider. Then, we design a parallel and distributed load balancing algorithm with low computational complexity based on Proximal Jacobian Alternating Direction Method of Multipliers (PJ-ADMM). Finally, extensive simulation results show the effectiveness of the proposed algorithm.
  • Cities are living systems where urban infrastructures and their functions are defined and evolved due to population behaviors. Profiling the cities and functional regions has been an important topic in urban design and planning. This paper studies a unique big data set which includes daily movement data of tens of millions of city residents, and develop a visual analytics system, namely UrbanFACET, to discover and visualize the dynamical profiles of multiple cities and their residents. This big user movement data set, acquired from mobile users' agnostic check-ins at thousands of phone APPs, is well utilized in an integrative study and visualization together with urban structure (e.g., road network) and POI (Point of Interest) distributions. In particular, we novelly develop a set of information-theory based metrics to characterize the mobility patterns of city areas and groups of residents. These multifaceted metrics including Fluidity, vibrAncy, Commutation, divErsity, and densiTy (FACET) which categorize and manifest hidden urban functions and behaviors. UrbanFACET system further allows users to visually analyze and compare the metrics over different areas and cities in metropolitan scales. The system is evaluated through both case studies on several big and heavily populated cities, and user studies involving real-world users.
  • A classic result of Erd\H{o}s and, independently, of Bondy and Simonovits says that the maximum number of edges in an $n$-vertex graph not containing $C_{2k}$, the cycle of length $2k$, is $O( n^{1+1/k})$. Simonovits established a corresponding supersaturation result for $C_{2k}$'s, showing that there exist positive constants $C,c$ depending only on $k$ such that every $n$-vertex graph $G$ with $e(G)\geq Cn^{1+1/k}$ contains at least $c\left(\frac{e(G)}{v(G)}\right)^{2k}$ many copies of $C_{2k}$, this number of copies tightly achieved by the random graph (up to a multiplicative constant). In this paper, we extend Simonovits' result to a supersaturation result of $r$-uniform linear cycles of even length in $r$-uniform linear hypergraphs. Our proof is self-contained and includes the $r=2$ case. As an auxiliary tool, we develop a reduction lemma from general host graphs to almost-regular host graphs that can be used for other supersaturation problems, and may therefore be of independent interest.
  • Excitons, Coulomb-bound electron and hole pairs, are elementary photo-excitations in semiconductors, that can couple directly to light through radiative relaxation. In contrast to these bright excitons, dark excitons X$\rm{_D}$ with anti-parallel electron spin polarization exist, with generally forbidden radiative emission. Because of their associated long lifetimes, these dark excitons are appealing candidates for quantum computing and opto-electronic devices. However, optical read-out and control of X$\rm{_D}$ states have remained a major challenge due to their decoupling from light. Here, we present a novel tip-enhanced nano-optical approach to precisely switch and programmably modulate the X$\rm{_D}$ emission even at room temperature. Using monolayer two-dimensional transition metal dichalcogenide (TMD) WSe$\rm{_2}$ on a gold film as model system, we demonstrate ${\sim} 6 \times 10^5$-fold enhancement in dark exciton photoluminescence quantum yield. This is achieved by the unique coupling of the nano-optical antenna-tip to the dark exciton \textit{out-of-plane} optical dipole moment, with an extraordinary Purcell factor of $\ge 2 \times 10^3$ of the tip-sample nano-cavity. Compared to the necessity of cryogenic temperatures and high magnetic fields in conventional approaches, our work provides a new way to harness excitonic properties in low-dimensional semiconductors and new strategies for quantum opto-electronic devices.
  • In this paper, we consider a bidimensional renewal risk model with constant force of interest, in which the claim size vector with certain local subexponential marginal distribution and its inter-arrival time are subject to a new time-dependence structure. We obtain the uniform local asymptotics of the total net loss process in the model. Moreover, some specific examples of the joint distribution satisfying the conditions of the dependence structure are given. Finally, in order to illustrate a condition of the above result, a local subexponential distribution is find for the first time that, its local distribution is not almost decreased.