-
Lensing of the CMB is now a well-developed probe of large-scale clustering
over a broad range of redshifts. By exploiting the non-Gaussian imprints of
lensing in the polarization of the CMB, the CORE mission can produce a clean
map of the lensing deflections over nearly the full-sky. The number of high-S/N
modes in this map will exceed current CMB lensing maps by a factor of 40, and
the measurement will be sample-variance limited on all scales where linear
theory is valid. Here, we summarise this mission product and discuss the
science that it will enable. For example, the summed mass of neutrinos will be
determined to an accuracy of 17 meV combining CORE lensing and CMB two-point
information with contemporaneous BAO measurements, three times smaller than the
minimum total mass allowed by neutrino oscillations. In the search for B-mode
polarization from primordial gravitational waves with CORE, lens-induced
B-modes will dominate over instrument noise, limiting constraints on the
gravitational wave power spectrum amplitude. With lensing reconstructed by
CORE, one can "delens" the observed polarization internally, reducing the
lensing B-mode power by 60%. This improves to 70% by combining lensing and CIB
measurements from CORE, reducing the error on the gravitational wave amplitude
by 2.5 compared to no delensing (in the null hypothesis). Lensing measurements
from CORE will allow calibration of the halo masses of the 40000 galaxy
clusters that it will find, with constraints dominated by the clean
polarization-based estimators. CORE can accurately remove Galactic emission
from CMB maps with its 19 frequency channels. We present initial findings that
show that residual Galactic foreground contamination will not be a significant
source of bias for lensing power spectrum measurements with CORE. [abridged]
-
We forecast the scientific capabilities to improve our understanding of
cosmic inflation of CORE, a proposed CMB space satellite submitted in response
to the ESA fifth call for a medium-size mission opportunity. The CORE satellite
will map the CMB anisotropies in temperature and polarization in 19 frequency
channels spanning the range 60-600 GHz. CORE will have an aggregate noise
sensitivity of $1.7 \mu$K$\cdot \,$arcmin and an angular resolution of 5' at
200 GHz. We explore the impact of telescope size and noise sensitivity on the
inflation science return by making forecasts for several instrumental
configurations. This study assumes that the lower and higher frequency channels
suffice to remove foreground contaminations and complements other related
studies of component separation and systematic effects, which will be reported
in other papers of the series "Exploring Cosmic Origins with CORE." We forecast
the capability to determine key inflationary parameters, to lower the detection
limit for the tensor-to-scalar ratio down to the $10^{-3}$ level, to chart the
landscape of single field slow-roll inflationary models, to constrain the epoch
of reheating, thus connecting inflation to the standard radiation-matter
dominated Big Bang era, to reconstruct the primordial power spectrum, to
constrain the contribution from isocurvature perturbations to the $10^{-3}$
level, to improve constraints on the cosmic string tension to a level below the
presumptive GUT scale, and to improve the current measurements of primordial
non-Gaussianities down to the $f_{NL}^{\rm local} < 1$ level. For all the
models explored, CORE alone will improve significantly on the present
constraints on the physics of inflation. Its capabilities will be further
enhanced by combining with complementary future cosmological observations.
-
We forecast the main cosmological parameter constraints achievable with the
CORE space mission which is dedicated to mapping the polarisation of the Cosmic
Microwave Background (CMB). CORE was recently submitted in response to ESA's
fifth call for medium-sized mission proposals (M5). Here we report the results
from our pre-submission study of the impact of various instrumental options, in
particular the telescope size and sensitivity level, and review the great,
transformative potential of the mission as proposed. Specifically, we assess
the impact on a broad range of fundamental parameters of our Universe as a
function of the expected CMB characteristics, with other papers in the series
focusing on controlling astrophysical and instrumental residual systematics. In
this paper, we assume that only a few central CORE frequency channels are
usable for our purpose, all others being devoted to the cleaning of
astrophysical contaminants. On the theoretical side, we assume LCDM as our
general framework and quantify the improvement provided by CORE over the
current constraints from the Planck 2015 release. We also study the joint
sensitivity of CORE and of future Baryon Acoustic Oscillation and Large Scale
Structure experiments like DESI and Euclid. Specific constraints on the physics
of inflation are presented in another paper of the series. In addition to the
six parameters of the base LCDM, which describe the matter content of a
spatially flat universe with adiabatic and scalar primordial fluctuations from
inflation, we derive the precision achievable on parameters like those
describing curvature, neutrino physics, extra light relics, primordial helium
abundance, dark matter annihilation, recombination physics, variation of
fundamental constants, dark energy, modified gravity, reionization and cosmic
birefringence. (ABRIDGED)
-
One of the most powerful techniques to study the dark sector of the Universe
is weak gravitational lensing. In practice, to infer the reduced shear, weak
lensing measures galaxy shapes, which are the consequence of both the intrinsic
ellipticity of the sources and of the integrated gravitational lensing effect
along the line of sight. Hence, a very large number of galaxies is required in
order to average over their individual properties and to isolate the weak
lensing cosmic shear signal. If this `shape noise' can be reduced, significant
advances in the power of a weak lensing surveys can be expected. This paper
describes a general method for extracting the probability distributions of
parameters from catalogues of data using Voronoi cells, which has several
applications, and has synergies with Bayesian hierarchical modelling
approaches. This allows us to construct a probability distribution for the
variance of the intrinsic ellipticity as a function of galaxy property using
only photometric data, allowing a reduction of shape noise. As a proof of
concept the method is applied to the CFHTLenS survey data. We use this approach
to investigate trends of galaxy properties in the data and apply this to the
case of weak lensing power spectra.
-
The Kilo-Degree Survey (KiDS) is a multi-band imaging survey designed for
cosmological studies from weak lensing and photometric redshifts. It uses the
ESO VLT Survey Telescope with its wide-field camera OmegaCAM. KiDS images are
taken in four filters similar to the SDSS ugri bands. The best-seeing time is
reserved for deep r-band observations that reach a median 5-sigma limiting AB
magnitude of 24.9 with a median seeing that is better than 0.7arcsec.
Initial KiDS observations have concentrated on the GAMA regions near the
celestial equator, where extensive, highly complete redshift catalogues are
available. A total of 109 survey tiles, one square degree each, form the basis
of the first set of lensing analyses, which focus on measurements of halo
properties of GAMA galaxies. 9 galaxies per square arcminute enter the lensing
analysis, for an effective inverse shear variance of 69 per square arcminute.
Accounting for the shape measurement weight, the median redshift of the sources
is 0.53.
KiDS data processing follows two parallel tracks, one optimized for galaxy
shape measurement (for weak lensing), and one for accurate matched-aperture
photometry in four bands (for photometric redshifts). This technical paper
describes how the lensing and photometric redshift catalogues have been
produced (including an extensive description of the Gaussian Aperture and
Photometry pipeline), summarizes the data quality, and presents extensive tests
for systematic errors that might affect the lensing analyses. We also provide
first demonstrations of the suitability of the data for cosmological
measurements, and explain how the shear catalogues were blinded to prevent
confirmation bias in the scientific analyses.
The KiDS shear and photometric redshift catalogues, presented in this paper,
are released to the community through http://kids.strw.leidenuniv.nl .
-
Collisions between galaxy clusters provide a test of the non-gravitational
forces acting on dark matter. Dark matter's lack of deceleration in the `bullet
cluster collision' constrained its self-interaction cross-section \sigma_DM/m <
1.25cm2/g (68% confidence limit) for long-ranged forces. Using the Chandra and
Hubble Space Telescopes we have now observed 72 collisions, including both
`major' and `minor' mergers. Combining these measurements statistically, we
detect the existence of dark mass at 7.6\sigma significance. The position of
the dark mass has remained closely aligned within 5.8+/-8.2 kpc of associated
stars: implying a self-interaction cross-section \sigma_DM/m < 0.47 cm2/g (95%
CL) and disfavoring some proposed extensions to the standard model.
-
In this paper we present the testing of a back-illuminated development Euclid
Visible Instrument (VIS) Charge-Coupled Device (CCD) to measure the intrinsic
CCD Point Spread Function (PSF) characteristics using a novel modelling
technique. We model the optical spot projection system and the CCD273-84 PSF
jointly. We fit a model using Bayesian posterior probability density function,
sampling to all available data simultaneously. The generative model fitting is
shown, using simulated data, to allow good parameter estimations even when
these data are not well sampled. Using available spot data we characterise a
CCD273-84 PSF as a function of wavelength and intensity. The CCD PSF kernel
size was found to increase with increasing intensity and decreasing wavelength.
-
We present the cluster mass-richness scaling relation calibrated by a weak
lensing analysis of >18000 galaxy cluster candidates in the
Canada-France-Hawaii Telescope Lensing Survey (CFHTLenS). Detected using the
3D-Matched-Filter cluster-finder of Milkeraitis et al., these cluster
candidates span a wide range of masses, from the small group scale up to
$\sim10^{15} M_{\odot}$, and redshifts 0.2 $\lesssim z\lesssim$ 0.9. The total
significance of the stacked shear measurement amounts to 54$\sigma$. We compare
cluster masses determined using weak lensing shear and magnification, finding
the measurements in individual richness bins to yield 1$\sigma$ compatibility,
but with magnification estimates biased low. This first direct mass comparison
yields important insights for improving the systematics handling of future
lensing magnification work. In addition, we confirm analyses that suggest
cluster miscentring has an important effect on the observed 3D-MF halo
profiles, and we quantify this by fitting for projected cluster centroid
offsets, which are typically $\sim$ 0.4 arcmin. We bin the cluster candidates
as a function of redshift, finding similar cluster masses and richness across
the full range up to $z \sim$ 0.9. We measure the 3D-MF mass-richness scaling
relation $M_{200} = M_0 (N_{200} / 20)^\beta$. We find a normalization $M_0
\sim (2.7^{+0.5}_{-0.4}) \times 10^{13} M_{\odot}$, and a logarithmic slope of
$\beta \sim 1.4 \pm 0.1$, both of which are in 1$\sigma$ agreement with results
from the magnification analysis. We find no evidence for a redshift-dependence
of the normalization. The CFHTLenS 3D-MF cluster catalogue is now available at
cfhtlens.org.
-
In this paper we derive an exact full expression for the 2D probability
distribution of the ellipticity of an object measured from data, only assuming
Gaussian noise in pixel values. This is a generalisation of the probability
distribution for the ratio of single random variables, that is well-known, to
the multivariate case. This expression is derived within the context of the
measurement of weak gravitational lensing from noisy galaxy images. We find
that the third flattening, or epsilon-ellipticity, has a biased maximum
likelihood but an unbiased mean; and that the third eccentricity, or normalised
polarisation chi, has both a biased maximum likelihood and a biased mean. The
very fact that the bias in the ellipticity is itself a function of the
ellipticity requires an accurate knowledge of the intrinsic ellipticity
distribution of the galaxies in order to properly calibrate shear measurements.
We use this expression to explore strategies for calibration of biases caused
by measurement processes in weak gravitational lensing. We find that upcoming
weak lensing surveys like KiDS or DES require calibration fields of order of
several square degrees and 1.2 magnitude deeper than the wide survey in order
to correct for the noise bias. Future surveys like Euclid will require
calibration fields of order 40 square degree and several magnitude deeper than
the wide survey. We also investigate the use of the Stokes parameters to
estimate the shear as an alternative to the ellipticity. We find that they can
provide unbiased shear estimates at the cost of a very large variance in the
measurement. The python code used to compute the distributions presented in the
paper and to perform the numerical calculations are available on request.
-
This paper describes the definition of a typical next-generation space-based
weak gravitational lensing experiment. We first adopt a set of top-level
science requirements from the literature, based on the scale and depth of the
galaxy sample, and the avoidance of systematic effects in the measurements
which would bias the derived shear values. We then identify and categorise the
contributing factors to the systematic effects, combining them with the correct
weighting, in such a way as to fit within the top-level requirements. We
present techniques which permit the performance to be evaluated and explore the
limits at which the contributing factors can be managed. Besides the modelling
biases resulting from the use of weighted moments, the main contributing
factors are the reconstruction of the instrument point spread function (PSF),
which is derived from the stellar images on the image, and the correction of
the charge transfer inefficiency (CTI) in the CCD detectors caused by radiation
damage.
-
Direct evidence for the existence of dark matter and measurements of its
interaction cross-section have been provided by the physical offset between
dark matter and intra- cluster gas in merging systems like the Bullet Cluster.
Although a smaller signal, this effect is more abundant in minor mergers where
infalling substructure dark matter and gas are segregated. In such low-mass
systems the gravitational lensing signal comes primarily from weak lensing. A
fundamental step in determining such an offset in sub- structure is the ability
to accurately measure the positions of dark matter sub-peaks. Using simulated
Hubble Space Telescope observations, we make a first assessment of the
precision and accuracy with which we can measure infalling groups using weak
gravitational lensing. We demonstrate that using an existing and well-used mass
re- construction algorithm can measure the positions of 1.5x1013 M
substructures that have parent halos ten times more massive with a bias of less
than 0.3 . In this regime, our analysis suggests the precision is sufficient to
detect (at 3 {\sigma} statistical significance) the expected mean offset
between dark matter and baryonic gas in infalling groups from a sample of 50
massive clusters.
-
Cosmological parameter estimation requires that the likelihood function of
the data is accurately known. Assuming that cosmological large-scale structure
power spectra data are multivariate Gaussian-distributed, we show the accuracy
of parameter estimation is limited by the accuracy of the inverse data
covariance matrix - the precision matrix. If the data covariance and precision
matrices are estimated by sampling independent realisations of the data, their
statistical properties are described by the Wishart and Inverse-Wishart
distributions, respectively. Independent of any details of the survey, we show
that the fractional error on a parameter variance, or a Figure-of-Merit, is
equal to the fractional variance of the precision matrix. In addition, for the
only unbiased estimator of the precision matrix, we find that the fractional
accuracy of the parameter error depends only on the difference between the
number of independent realisations and the number of data points, and so can
easily diverge. For a 5% error on a parameter error and N_D << 100 data-points,
a minimum of 200 realisations of the survey are needed, with 10% accuracy for
the data covariance. If the number of data-points N_D >>100 we need N_S > N_D
realisations and a fractional accuracy of <sqrt[2/N_D] in the data covariance.
As the number of power spectra data points grows to N_D>10^4 -10^6 this
approach will be problematic. We discuss possible ways to relax these
conditions: improved theoretical modelling; shrinkage methods;
data-compression; simulation and data resampling methods.
-
The travel time required for one civilisation to explore the Milky Way using
probes is a crucial component of Fermi's Paradox. Previous attempts to estimate
this travel time have assumed that the probe's motion is simple, moving at a
constant maximum velocity, with powered flight producing the necessary change
in velocity required at each star to complete its chosen trajectory. This
approach ignores lessons learned from interplanetary exploration, where orbital
slingshot maneouvres can provide significant velocity boosts at little to no
fuel cost. It is plausible that any attempt to explore the Galaxy would utilise
such economising techniques, despite there being an upper limit to these
velocity boosts, related to the escape velocity of the object being used to
provide the slingshot.
In order to investigate the effects of these techniques, we present multiple
realisations of single probes exploring a small patch of the Milky Way. We
investigate 3 separate scenarios, studying the slingshot effect on trajectories
defined by simple heuristics. These scenarios are: i) standard powered flight
to the nearest unvisited star without using slingshot techniques; ii) flight to
the nearest unvisited star using slingshot techniques, and iii) flight to the
next unvisited star which provides the maximal velocity boost under a slingshot
trajectory.
We find that adding slingshot velocity boosts can decrease the travel time by
up to two orders of magnitude over simple powered flight. In the third case,
selecting a route which maximises velocity boosts also reduces the travel time
relative to powered flight, but by a much reduced factor. From these
simulations, we suggest that adding realistic probe trajectories tends to
strengthen Fermi's Paradox.
-
The spatial variation of the colour of a galaxy may introduce a bias in the
measurement of its shape if the PSF profile depends on wavelength. We study how
this bias depends on the properties of the PSF and the galaxies themselves. The
bias depends on the scales used to estimate the shape, which may be used to
optimise methods to reduce the bias. Here we develop a general approach to
quantify the bias. Although applicable to any weak lensing survey, we focus on
the implications for the ESA Euclid mission.
Based on our study of synthetic galaxies we find that the bias is a few times
10^-3 for a typical galaxy observed by Euclid. Consequently, it cannot be
neglected and needs to be accounted for. We demonstrate how one can do so using
spatially resolved observations of galaxies in two filters. We show that HST
observations in the F606W and F814W filters allow us to model and reduce the
bias by an order of magnitude, sufficient to meet Euclid's scientific
requirements. The precision of the correction is ultimately determined by the
number of galaxies for which spatially-resolved observations in at least two
filters are available. We use results from the Millennium Simulation to
demonstrate that archival HST data will be sufficient for the tomographic
cosmic shear analysis with the Euclid dataset.
-
The first half of this paper explores the origin of systematic biases in the
measurement of weak gravitational lensing. Compared to previous work, we expand
the investigation of PSF instability and fold in for the first time the effects
of non-idealities in electronic imaging detectors and imperfect galaxy shape
measurement algorithms. Together, these now explain the additive A(l) and
multiplicative M(l) systematics typically reported in current lensing
measurements. We find that overall performance is driven by a product of a
telescope/camera's *absolute performance*, and our *knowledge about its
performance*.
The second half of this paper propagates any residual shear measurement
biases through to their effect on cosmological parameter constraints. Fully
exploiting the statistical power of Stage IV weak lensing surveys will require
additive biases A<1.8e-12 and multiplicative biases M<4.0e-3. These can be
allocated between individual budgets in hardware, calibration data and
software, using results from the first half of the paper.
If instrumentation is stable and well-calibrated, we find extant shear
measurement software from GREAT10 already meet requirements on galaxies
detected at S/N=40. Averaging over a population of galaxies with a realistic
distribution of sizes, it also meets requirements for a 2D cosmic shear
analysis from space. If used on fainter galaxies or for 3D cosmic shear
tomography, existing algorithms would need calibration on simulations to avoid
introducing bias at a level similar to the statistical error. Requirements on
hardware and calibration data are discussed in more detail in a companion
paper. Our analysis is intentionally general, but is specifically being used to
drive the hardware and ground segment performance budget for the design of the
European Space Agency's recently-selected Euclid mission.
-
We present a method for attaining sub-arcsecond pointing stability during
sub- orbital balloon flights, as designed for in the High Altitude Lensing
Observatory (HALO) concept. The pointing method presented here has the
potential to perform near-space quality optical astronomical imaging at 1-2% of
the cost of space-based missions. We also discuss an architecture that can
achieve sufficient thermomechanical stability to match the pointing stability.
This concept is motivated by advances in the development and testing of Ultra
Long Duration Balloon (ULDB) flights which promise to allow observation
campaigns lasting more than three months. The design incorporates a multi-stage
pointing architecture comprising: a gondola coarse azimuth control system, a
multi-axis nested gimbal frame structure with arcsecond stability, a telescope
de-rotator to eliminate field rotation, and a fine guidance stage consisting of
both a telescope mounted angular rate sensor and guide CCDs in the focal plane
to drive a fast-steering mirror. We discuss the results of pointing tests
together with a preliminary thermo-mechanical analysis required for
sub-arcsecond pointing at high altitude. Possible future applications in the
areas of wide-field surveys and exoplanet searches are also discussed.
-
High precision cosmology with weak gravitational lensing requires a precise
measure of the Point Spread Function across the imaging data where the accuracy
to which high spatial frequency variation can be modelled is limited by the
stellar number density across the field. We analyse dense stellar fields imaged
at the Canada-France-Hawaii Telescope to quantify the degree of high spatial
frequency variation in ground-based imaging Point Spread Functions and compare
our results to models of atmospheric turbulence. The data shows an anisotropic
turbulence pattern with an orientation independent of the wind direction and
wind speed. We find the amplitude of the high spatial frequencies to decrease
with increasing exposure time as $t^{-1/2}$, and find a negligibly small
atmospheric contribution to the Point Spread Function ellipticity variation for
exposure times $t>180$ seconds. For future surveys analysing shorter exposure
data, this anisotropic turbulence will need to be taken into account as the
amplitude of the correlated atmospheric distortions becomes comparable to a
cosmological lensing signal on scales less than $\sim 10$ arcminutes. This
effect could be mitigated, however, by correlating galaxy shear measured on
exposures imaged with a time separation greater than 50 seconds, for which we
find the spatial turbulence patterns to be uncorrelated.
-
GRavitational lEnsing Accuracy Testing 2010 (GREAT10) is a public image
analysis challenge aimed at the development of algorithms to analyze
astronomical images. Specifically, the challenge is to measure varying image
distortions in the presence of a variable convolution kernel, pixelization and
noise. This is the second in a series of challenges set to the astronomy,
computer science and statistics communities, providing a structured environment
in which methods can be improved and tested in preparation for planned
astronomical surveys. GREAT10 extends upon previous work by introducing
variable fields into the challenge. The "Galaxy Challenge" involves the precise
measurement of galaxy shape distortions, quantified locally by two parameters
called shear, in the presence of a known convolution kernel. Crucially, the
convolution kernel and the simulated gravitational lensing shape distortion
both now vary as a function of position within the images, as is the case for
real data. In addition, we introduce the "Star Challenge" that concerns the
reconstruction of a variable convolution kernel, similar to that in a typical
astronomical observation. This document details the GREAT10 Challenge for
potential participants. Continually updated information is also available from
http://www.greatchallenges.info.
-
The unique properties of dark matter are revealed during collisions between
clusters of galaxies, like the bullet cluster (1E 0657-56) and baby bullet
(MACSJ0025-12). These systems provide evidence for an additional, invisible
mass in the separation between the distribution of their total mass, measured
via gravitational lensing, and their ordinary 'baryonic' matter, measured via
its X-ray emission. Unfortunately, the information available from these systems
is limited by their rarity. Constraints on the properties of dark matter, such
as its interaction cross-section, are therefore restricted by uncertainties in
the individual systems' impact velocity, impact parameter and orientation with
respect to the line of sight.
Here we develop a complementary, statistical measurement in which every piece
of substructure falling into every massive cluster is treated as a bullet. We
define 'bulleticity' as the mean separation between dark matter and ordinary
matter, and we measure the signal in hydrodynamical simulations. The phase
space of substructure orbits also exhibits symmetries that provide an
equivalent control test.
Any detection of bulleticity in real data would indicate a difference in the
interaction cross-sections of baryonic and dark matter that may rule out
hypotheses of non-particulate dark matter that are otherwise able to model
individual systems. A subsequent measurement of bulleticity could constrain the
dark matter cross-section. Even with conservative estimates, the existing HST
archive should yield an independent constraint tighter than that from the
bullet cluster. This technique is then trivially extendable to, and benefits
enormously from larger, future surveys.
-
We introduce a collection of statistics appropriate for the study of
spinorial quantities defined in three dimensions, focussing on applications to
cosmological weak gravitational lensing studies in 3D. In particular, we
concentrate on power spectra associated with three- and four-point statistics,
which have the advantage of compressing a large number of typically very noisy
modes into a convenient data set. It has been shown previously by \cite{MuHe09}
that, for non--Gaussianity studies in the microwave background, such
compression can be lossless for certain purposes, so we expect the statistics
we define here to capture the bulk of the cosmological information available in
these higher-order statistics. We consider the effects of a sky mask and noise,
and use Limber's approximation to show how, for high-frequency angular modes,
confrontation of the statistics with theory can be achieved efficiently and
accurately. We focus on scalar and spinorial fields including convergence,
shear and flexion of 3D weak lensing, but many of the results apply for general
spin fields.
-
Given a standard model to test, an experiment can be designed to: (i) measure
the standard model parameters; (ii) extend the standard model; or (iii) look
for evidence of deviations from the standard model. To measure (or extend) the
standard model, the Fisher matrix is widely used in cosmology to predict
expected parameter errors for future surveys under Gaussian assumptions. In
this article, we present a frame- work that can be used to design experiments
such that it maximises the chance of finding a deviation from the standard
model. Using a simple illustrative example, discussed in the appendix, we show
that the optimal experimental configuration can depend dramatically on the
optimisation approach chosen. We also show some simple cosmology calculations,
where we study Baryonic Acoustic Oscillation and Supernove surveys. In doing
so, we also show how external data, such as the positions of the CMB peaks
measured by WMAP, and theory priors can be included in the analysis. In the
cosmological cases that we have studied (DETF Stage III), we find that the
three optimisation approaches yield similar results, which is reassuring and
indicates that the choice of optimal experiment is fairly robust at this level.
However, this may not be the case as we move to more ambitious future surveys.
-
We review progress in understanding dark matter by astrophysics, and
particularly via the effect of gravitational lensing. Evidence from many
different directions now all imply that five sixths of the material content of
the universe is in this mysterious form, separate from and beyond the ordinary
"baryonic" particles in the standard model of particle physics. Dark matter
appears not to interact via the electromagnetic force, and therefore neither
emits nor reflects light. However, it definitely does interact via gravity, and
has played the most important role in shaping the Universe on large scales. The
most successful technique with which to investigate it has so far been the
effect of gravitational lensing. The curvature of space-time near any
gravitating mass (including dark matter) deflects passing rays of light -
observably shifting, distorting and magnifying the images of background
galaxies. Measurements of such effects currently provide constraints on the
mean density of dark matter, and its density relative to baryonic matter; the
size and mass of individual dark matter particles; and its cross section under
various fundamental forces.
-
Cosmological probes are steadily reducing the total neutrino mass window,
resulting in constraints on the neutrino-mass degeneracy as the most
significant outcome. In this work we explore the discovery potential of
cosmological probes to constrain the neutrino hierarchy, and point out some
subtleties that could yield spurious claims of detection. This has an important
implication for next generation of double beta decay experiments, that will be
able to achieve a positive signal in the case of degenerate or inverted
hierarchy of Majorana neutrinos. We find that cosmological experiments that
nearly cover the whole sky could in principle distinguish the neutrino
hierarchy by yielding 'substantial' evidence for one scenario over the another,
via precise measurements of the shape of the matter power spectrum from large
scale structure and weak gravitational lensing.
-
We present the results of the GREAT08 Challenge, a blind analysis challenge
to infer weak gravitational lensing shear distortions from images. The primary
goal was to stimulate new ideas by presenting the problem to researchers
outside the shear measurement community. Six GREAT08 Team methods were
presented at the launch of the Challenge and five additional groups submitted
results during the 6 month competition. Participants analyzed 30 million
simulated galaxies with a range in signal to noise ratio, point-spread function
ellipticity, galaxy size, and galaxy type. The large quantity of simulations
allowed shear measurement methods to be assessed at a level of accuracy
suitable for currently planned future cosmic shear observations for the first
time. Different methods perform well in different parts of simulation parameter
space and come close to the target level of accuracy in several of these. A
number of fresh ideas have emerged as a result of the Challenge including a
re-examination of the process of combining information from different galaxies,
which reduces the dependence on realistic galaxy modelling. The image
simulations will become increasingly sophisticated in future GREAT challenges,
meanwhile the GREAT08 simulations remain as a benchmark for additional
developments in shear measurement algorithms.
-
The GRavitational lEnsing Accuracy Testing 2008 (GREAT08) Challenge focuses
on a problem that is of crucial importance for future observations in
cosmology. The shapes of distant galaxies can be used to determine the
properties of dark energy and the nature of gravity, because light from those
galaxies is bent by gravity from the intervening dark matter. The observed
galaxy images appear distorted, although only slightly, and their shapes must
be precisely disentangled from the effects of pixelisation, convolution and
noise. The worldwide gravitational lensing community has made significant
progress in techniques to measure these distortions via the Shear TEsting
Program (STEP). Via STEP, we have run challenges within our own community, and
come to recognise that this particular image analysis problem is ideally
matched to experts in statistical inference, inverse problems and computational
learning. Thus, in order to continue the progress seen in recent years, we are
seeking an infusion of new ideas from these communities. This document details
the GREAT08 Challenge for potential participants. Please visit
http://www.great08challenge.info for the latest information.