
Ultrashort, lowemittance electron pulses can be created at a high repetition
rate by using a TM$_{110}$ deflection cavity to sweep a continuous beam across
an aperture. These pulses can be used for timeresolved electron microscopy
with atomic spatial and temporal resolution at relatively large average
currents. In order to demonstrate this, a cavity has been inserted in a
transmission electron microscope, and picosecond pulses have been created. No
significant increase of either emittance or energy spread has been measured for
these pulses.
At a peak current of $814\pm2$ pA, the rootmeansquare transverse normalized
emittance of the electron pulses is $\varepsilon_{n,x}=(2.7\pm0.1)\cdot
10^{12}$ m rad in the direction parallel to the streak of the cavity, and
$\varepsilon_{n,y}=(2.5\pm0.1)\cdot 10^{12}$ m rad in the perpendicular
direction for pulses with a pulse length of 1.11.3 ps. Under the same
conditions, the emittance of the continuous beam is
$\varepsilon_{n,x}=\varepsilon_{n,y}=(2.5\pm0.1)\cdot 10^{12}$ m rad.
Furthermore, for both the pulsed and the continuous beam a full width at half
maximum energy spread of $0.95\pm0.05$ eV has been measured.

This paper offers an analytical description of resonant, radio frequency
(RF), deflecting cavities in TM$_{110}$ mode as dynamic optical elements for
ultrafast electron microscopy. We first derive the optical transfer matrix of
an ideal pillbox cavity and use a CourantSnyder formalism to calculate the 6D
phase space propagation of a Gaussian electron distribution through the cavity.
We derive closed, analytic expressions for the increase in transverse emittance
and energy spread of the electron distribution. We demonstrate that for the
special case of a beam focused in the center of the cavity, the low emittance
and low energy spread of a high quality beam can be maintained, which allows
highrepetition rate, ultrafast electron microscopy with 100 fs temporal
resolution combined with the atomic resolution of a highend TEM. This is
confirmed by charged particle tracking simulations using a realistic cavity
geometry, including fringe fields at the cavity entrance and exit apertures.

Substantial experimental and theoretical efforts worldwide are devoted to
explore the phase diagram of strongly interacting matter. At LHC and top RHIC
energies, QCD matter is studied at very high temperatures and nearly vanishing
netbaryon densities. There is evidence that a QuarkGluonPlasma (QGP) was
created at experiments at RHIC and LHC. The transition from the QGP back to the
hadron gas is found to be a smooth cross over. For larger netbaryon densities
and lower temperatures, it is expected that the QCD phase diagram exhibits a
rich structure, such as a firstorder phase transition between hadronic and
partonic matter which terminates in a critical point, or exotic phases like
quarkyonic matter. The discovery of these landmarks would be a breakthrough in
our understanding of the strong interaction and is therefore in the focus of
various highenergy heavyion research programs. The Compressed Baryonic Matter
(CBM) experiment at FAIR will play a unique role in the exploration of the QCD
phase diagram in the region of high netbaryon densities, because it is
designed to run at unprecedented interaction rates. Highrate operation is the
key prerequisite for highprecision measurements of multidifferential
observables and of rare diagnostic probes which are sensitive to the dense
phase of the nuclear fireball. The goal of the CBM experiment at SIS100
(sqrt(s_NN) = 2.7  4.9 GeV) is to discover fundamental properties of QCD
matter: the phase structure at large baryonchemical potentials (mu_B > 500
MeV), effects of chiral symmetry, and the equationofstate at high density as
it is expected to occur in the core of neutron stars. In this article, we
review the motivation for and the physics programme of CBM, including
activities before the start of data taking in 2022, in the context of the
worldwide efforts to explore highdensity QCD matter.