• Traditional intelligent fault diagnosis of rolling bearings work well only under a common assumption that the labeled training data (source domain) and unlabeled testing data (target domain) are drawn from the same distribution. However, in many real-world applications, this assumption does not hold, especially when the working condition varies. In this paper, a new adversarial adaptive 1-D CNN called A2CNN is proposed to address this problem. A2CNN consists of four parts, namely, a source feature extractor, a target feature extractor, a label classifier and a domain discriminator. The layers between the source and target feature extractor are partially untied during the training stage to take both training efficiency and domain adaptation into consideration. Experiments show that A2CNN has strong fault-discriminative and domain-invariant capacity, and therefore can achieve high accuracy under different working conditions. We also visualize the learned features and the networks to explore the reasons behind the high performance of our proposed model.
  • Recommender systems are widely used in big information-based companies such as Google, Twitter, LinkedIn, and Netflix. A recommender system deals with the problem of information overload by filtering important information fragments according to users' preferences. In light of the increasing success of deep learning, recent studies have proved the benefits of using deep learning in various recommendation tasks. However, most proposed techniques only aim to target individuals, which cannot be efficiently applied in group recommendation. In this paper, we propose a deep learning architecture to solve the group recommendation problem. On the one hand, as different individual preferences in a group necessitate preference trade-offs in making group recommendations, it is essential that the recommendation model can discover substitutes among user behaviors. On the other hand, it has been observed that a user as an individual and as a group member behaves differently. To tackle such problems, we propose using an attention mechanism to capture the impact of each user in a group. Specifically, our model automatically learns the influence weight of each user in a group and recommends items to the group based on its members' weighted preferences. We conduct extensive experiments on four datasets. Our model significantly outperforms baseline methods and shows promising results in applying deep learning to the group recommendation problem.
  • Multilayer graphene (MLG) grown by chemical vapor deposition (CVD) is a promising material for electronic and optoelectronic devices. Understanding the stacking configuration and interlayer coupling of MLGs is technologically relevant and of importance for the device applications. Here, we reported a kind of twisted MLGs (tMLGs), which are formed by stacking one graphene monolayer on the top of AB-stacked MLG by rotating a certain angle between them. The twist angle of tMLGs are identified by the twist-related modes, R and R'. With increasing the total layer number of N, the observed interlayer shear modes in the tMLG flake always follow those of AB-stacked (N-1)LG, while the observed interlayer breathing modes always follow those of AB-stacked NLG, independent of its twist angle. The layer breathing coupling of the tMLGs is almost identical to that of mechanically-exfoliated tMLGs, which demonstrates the high quality of MLGs grown by CVD. This study provides an applicable approach to probe the stacking configuration and interlayer coupling of MLGs grown by CVD or related methods. This work also demonstrates the possibility to grow MLG flakes with a fixed stacking configuration, $e.g.$, t(1+$n$)LG, by the CVD method.
  • Keyphrases efficiently summarize a document's content and are used in various document processing and retrieval tasks. Several unsupervised techniques and classifiers exist for extracting keyphrases from text documents. Most of these methods operate at a phrase-level and rely on part-of-speech (POS) filters for candidate phrase generation. In addition, they do not directly handle keyphrases of varying lengths. We overcome these modeling shortcomings by addressing keyphrase extraction as a sequential labeling task in this paper. We explore a basic set of features commonly used in NLP tasks as well as predictions from various unsupervised methods to train our taggers. In addition to a more natural modeling for the keyphrase extraction problem, we show that tagging models yield significant performance benefits over existing state-of-the-art extraction methods.
  • Social recommender systems exploit users' social relationships to improve the recommendation accuracy. Intuitively, a user tends to trust different subsets of her social friends, regarding with different scenarios. Therefore, the main challenge of social recommendation is to exploit the optimal social dependency between users for a specific recommendation task. In this paper, we propose a novel recommendation method, named probabilistic relational matrix factorization (PRMF), which aims to learn the optimal social dependency between users to improve the recommendation accuracy, with or without users' social relationships. Specifically, in PRMF, the latent features of users are assumed to follow a matrix variate normal (MVN) distribution. The positive and negative dependency between users are modeled by the row precision matrix of the MVN distribution. Moreover, we have also proposed an efficient alternating algorithm to solve the optimization problem of PRMF. The experimental results on real datasets demonstrate that the proposed PRMF method outperforms state-of-the-art social recommendation approaches, in terms of root mean square error (RMSE) and mean absolute error (MAE).
  • Transition-metal dichalcogenide (TMD) semiconductors have been widely studied due to their distinctive electronic and optical properties. The property of TMD flakes is a function of its thickness, or layer number (N). How to determine N of ultrathin TMDs materials is of primary importance for fundamental study and practical applications. Raman mode intensity from substrates has been used to identify N of intrinsic and defective multilayer graphenes up to N=100. However, such analysis is not applicable for ultrathin TMD flakes due to the lack of a unified complex refractive index ($\tilde{n}$) from monolayer to bulk TMDs. Here, we discuss the N identification of TMD flakes on the SiO$_2$/Si substrate by the intensity ratio between the Si peak from 100-nm (or 89-nm) SiO$_2$/Si substrates underneath TMD flakes and that from bare SiO$_2$/Si substrates. We assume the real part of $\tilde{n}$ of TMD flakes as that of monolayer TMD and treat the imaginary part of $\tilde{n}$ as a fitting parameter to fit the experimental intensity ratio. An empirical $\tilde{n}$, namely, $\tilde{n}_{eff}$, of ultrathin MoS$_{2}$, WS$_{2}$ and WSe$_{2}$ flakes from monolayer to multilayer is obtained for typical laser excitations (2.54 eV, 2.34 eV, or 2.09 eV). The fitted $\tilde{n}_{eff}$ of MoS$_{2}$ has been used to identify N of MoS$_{2}$ flakes deposited on 302-nm SiO$_2$/Si substrate, which agrees well with that determined from their shear and layer-breathing modes. This technique by measuring Raman intensity from the substrate can be extended to identify N of ultrathin 2D flakes with N-dependent $\tilde{n}$ . For the application purpose, the intensity ratio excited by specific laser excitations has been provided for MoS$_{2}$, WS$_{2}$ and WSe$_{2}$ flakes and multilayer graphene flakes deposited on Si substrates covered by 80-110 nm or 280-310 nm SiO$_2$ layer.
  • Any of two or more two-dimensional (2D) materials with similar properties can be alloyed into a new layered material, namely, 2D alloy. Individual monolayer in 2D alloys are kept together by Van der Waals interactions. The property of multilayer alloys is a function of their layer number. Here, we studied the shear (C) and layer-breathing (LB) modes of Mo$_{0.5}$W$_{0.5}$S$_2$ alloy flakes and their link to the layer number of alloy flakes. The study reveals that the disorder effect is absent in the C and LB modes of 2D alloys, and the monatomic chain model can be used to estimate the frequencies of the C and LB modes. We demonstrated how to use the C and LB mode frequency to identify the layer number of alloy flakes deposited on different substrates. This technique is independent of the substrate, stoichiometry, monolayer thickness and complex refractive index of 2D materials, offering a robust and substrate-free approach for layer-number identification of 2D materials.
  • Classification is one of the most popular and widely used supervised learning tasks, which categorizes objects into predefined classes based on known knowledge. Classification has been an important research topic in machine learning and data mining. Different classification methods have been proposed and applied to deal with various real-world problems. Unlike unsupervised learning such as clustering, a classifier is typically trained with labeled data before being used to make prediction, and usually achieves higher accuracy than unsupervised one. In this paper, we first define classification and then review several representative methods. After that, we study in details the application of classification to a critical problem in drug discovery, i.e., drug-target prediction, due to the challenges in predicting possible interactions between drugs and targets.
  • The human habitat is a host where microbial species evolve, function, and continue to evolve. Elucidating how microbial communities respond to human habitats is a fundamental and critical task, as establishing baselines of human microbiome is essential in understanding its role in human disease and health. However, current studies usually overlook a complex and interconnected landscape of human microbiome and limit the ability in particular body habitats with learning models of specific criterion. Therefore, these methods could not capture the real-world underlying microbial patterns effectively. To obtain a comprehensive view, we propose a novel ensemble clustering framework to mine the structure of microbial community pattern on large-scale metagenomic data. Particularly, we first build a microbial similarity network via integrating 1920 metagenomic samples from three body habitats of healthy adults. Then a novel symmetric Nonnegative Matrix Factorization (NMF) based ensemble model is proposed and applied onto the network to detect clustering pattern. Extensive experiments are conducted to evaluate the effectiveness of our model on deriving microbial community with respect to body habitat and host gender. From clustering results, we observed that body habitat exhibits a strong bound but non-unique microbial structural patterns. Meanwhile, human microbiome reveals different degree of structural variations over body habitat and host gender. In summary, our ensemble clustering framework could efficiently explore integrated clustering results to accurately identify microbial communities, and provide a comprehensive view for a set of microbial communities. Such trends depict an integrated biography of microbial communities, which offer a new insight towards uncovering pathogenic model of human microbiome.
  • Graphene and other two-dimensional crystals can be combined to form various hybrids and heterostructures, creating materials on demand, in which the interlayer coupling at the interface leads to modified physical properties as compared to their constituents. Here, by measuring Raman spectra of shear modes, we probe the coupling at the interface between two artificially-stacked few-layer graphenes rotated with respect to each other. The strength of interlayer coupling between the two interface layers is found to be only 20% of that between Bernal-stacked layers. Nevertheless, this weak coupling manifests itself in a Davydov splitting of the shear mode frequencies in systems consisting of two equivalent graphene multilayers, and in the intensity enhancement of shear modes due to the optical resonance with several optically allowed electronic transitions between conduction and valence bands in the band structures. This study paves way for fundamental understanding into the interface coupling of two-dimensional hybrids and heterostructures.
  • Multilayer films of ZnO with Co were deposited on glass substrates then annealed in a vacuum. The magnetisation of the films increased with annealing but not the magnitude of the magneto-optical signals. The dielectric functions for the films were calculated using the MCD spectra. A Maxwell Garnett theory of a metallic Co/ZnO mixture is presented. The extent to which this explains the MCD spectra taken on the films is discussed.